- 01 Nov, 2021 17 commits
-
-
Laurent Vivier authored
if we don't use all the entropy available in the buffer, keep it and use it later. Signed-off-by:
Laurent Vivier <lvivier@redhat.com> Link: https://lore.kernel.org/r/20211028101111.128049-4-lvivier@redhat.comSigned-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
Laurent Vivier authored
When virtio-rng device was dropped by the hwrng core we were forced to wait the buffer to come back from the device to not have remaining ongoing operation that could spoil the buffer. But now, as the buffer is internal to the virtio-rng we can release the waiting loop immediately, the buffer will be retrieve and use when the virtio-rng driver will be selected again. This avoids to hang on an rng_current write command if the virtio-rng device is blocked by a lack of entropy. This allows to select another entropy source if the current one is empty. Signed-off-by:
-
Laurent Vivier authored
hwrng core uses two buffers that can be mixed in the virtio-rng queue. If the buffer is provided with wait=0 it is enqueued in the virtio-rng queue but unused by the caller. On the next call, core provides another buffer but the first one is filled instead and the new one queued. And the caller reads the data from the new one that is not updated, and the data in the first one are lost. To avoid this mix, virtio-rng needs to use its own unique internal buffer at a cost of a data copy to the caller buffer. Signed-off-by:
-
Eli Cohen authored
Add code to register to hardware asynchronous events. Use this mechanism to track link status events coming from the device and update the config struct. After doing link status change, call the vdpa callback to notify of the link status change. Signed-off-by:
Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210909123635.30884-4-elic@nvidia.comSigned-off-by:
Jason Wang <jasowang@redhat.com>
-
Eli Cohen authored
A subesequent patch will use the same workqueue for executing other work not related to control VQ. Rename the workqueue and the work queue entry used to convey information to the workqueue. Signed-off-by:
-
Eli Cohen authored
No need to save the mtu int the net device struct. We can save it in the config struct which cannot be modified. Moreover, move the initialization to. mlx5_vdpa_set_features() callback is not the right place to put it. Signed-off-by:
-
Wu Zongyong authored
This patch adds a new vDPA driver for Alibaba ENI(Elastic Network Interface) which is build upon virtio 0.9.5 specification. And this driver is only enabled on X86 host currently. Link: https://lore.kernel.org/r/6a9f32c00609af16bbb2ea32e633b3beb1cbf84b.1635493219.git.wuzongyong@linux.alibaba.comSigned-off-by:
Wu Zongyong <wuzongyong@linux.alibaba.com> Link: https://lore.kernel.org/r/20211026083214.3375383-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> # fix Kconfig typo Signed-off-by:
-
Wu Zongyong authored
This attribute advertises the min value of virtqueue size. The value is 1 by default. Signed-off-by:
-
Wu Zongyong authored
For the devices which implement the get_vq_num_min callback, the driver should not negotiate with virtqueue size with the backend vdpa device if the value returned by get_vq_num_min equals to the value returned by get_vq_num_max. This is useful for vdpa devices based on legacy virtio specfication. Signed-off-by:
-
Wu Zongyong authored
Just failed to probe the vdpa device if the min virtqueue num returned by get_vq_num_min is greater than the max virtqueue num returned by get_vq_num_max. Signed-off-by:
-
Wu Zongyong authored
This callback is optional. For vdpa devices that not support to change virtqueue size, get_vq_num_min and get_vq_num_max will return the same value, so that users can choose a correct value for that device. Suggested-by:
-
Wu Zongyong authored
This patch implements the get_vq_irq() callback for virtio pci devices to allow irq offloading. Signed-off-by:
-
Wu Zongyong authored
Signed-off-by:
-
Wu Zongyong authored
Split common codes from virtio-pci-legacy so vDPA driver can reuse it later. Signed-off-by:
-
Max Gurtovoy authored
Sometimes a user would like to control the amount of request queues to be created for a block device. For example, for limiting the memory footprint of virtio-blk devices. Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
Max Gurtovoy <mgurtovoy@nvidia.com> Link: https://lore.kernel.org/r/20210902204622.54354-1-mgurtovoy@nvidia.comSigned-off-by:
-
Max Gurtovoy authored
No need to pre-allocate a big buffer for the IO SGL anymore. If a device has lots of deep queues, preallocation for the sg list can consume substantial amounts of memory. For HW virtio-blk device, nr_hw_queues can be 64 or 128 and each queue's depth might be 128. This means the resulting preallocation for the data SGLs is big. Switch to runtime allocation for SGL for lists longer than 2 entries. This is the approach used by NVMe drivers so it should be reasonable for virtio block as well. Runtime SGL allocation has always been the case for the legacy I/O path so this is nothing new. The preallocated small SGL depends on SG_CHAIN so if the ARCH doesn't support SG_CHAIN, use only runtime allocation for the SGL. Re-organize the setup of the IO request to fit the new sg chain mechanism. No performance degradation was seen (fio libaio engine with 16 jobs and 128 iodepth): IO size IOPs Rand Read (before/after) IOPs Rand Write (before/after) -------- --------------------------------- ---------------------------------- 512B 318K/316K 329K/325K 4KB 323K/321K 353K/349K 16KB 199K/208K 250K/275K 128KB 36K/36.1K 39.2K/41.7K Signed-off-by:
Israel Rukshin <israelr@nvidia.com> Link: https://lore.kernel.org/r/20210901131434.31158-1-mgurtovoy@nvidia.comReviewed-by:
Feng Li <lifeng1519@gmail.com> Reviewed-by:
-
Michael S. Tsirkin authored
Make tailroom math follow same logic as everything else, subtracing values in the order in which things are laid out in the buffer. Tested-by:
Corentin Noël <corentin.noel@collabora.com> Signed-off-by:
-
- 31 Oct, 2021 7 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.15-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix compilation of callchain related code on powerpc with gcc11+ - Fix PERF_SAMPLE_WEIGHT_STRUCT support in 'perf script' - Check session->header.env.arch before using it, fixing a segmentation fault - Suppress 'rm dlfilter' build messages * tag 'perf-tools-fixes-for-v5.15-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf script: Fix PERF_SAMPLE_WEIGHT_STRUCT support perf callchain: Fix compilation on powerpc with gcc11+ perf script: Check session->header.env.arch before using it perf build: Suppress 'rm dlfilter' build message
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: - Fixes for s390 interrupt delivery - Fixes for Xen emulator bugs showing up as debug kernel WARNs - Fix another issue with SEV/ES string I/O VMGEXITs * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Take srcu lock in post_kvm_run_save() KVM: SEV-ES: fix another issue with string I/O VMGEXITs KVM: x86/xen: Fix kvm_xen_has_interrupt() sleeping in kvm_vcpu_block() KVM: x86: switch pvclock_gtod_sync_lock to a raw spinlock KVM: s390: preserve deliverable_mask in __airqs_kick_single_vcpu KVM: s390: clear kicked_mask before sleeping again
-
Kan Liang authored
-F weight in perf script is broken. # ./perf mem record # ./perf script -F weight Samples for 'dummy:HG' event do not have WEIGHT attribute set. Cannot print 'weight' field. The sample type, PERF_SAMPLE_WEIGHT_STRUCT, is an alternative of the PERF_SAMPLE_WEIGHT sample type. They share the same space, weight. The lower 32 bits are exactly the same for both sample type. The higher 32 bits may be different for different architecture. For a new kernel on x86, the PERF_SAMPLE_WEIGHT_STRUCT is used. For an old kernel or other ARCHs, the PERF_SAMPLE_WEIGHT is used. With -F weight, current perf script will only check the input string "weight" with the PERF_SAMPLE_WEIGHT sample type. Because the commit ea8d0ed6 ("perf tools: Support PERF_SAMPLE_WEIGHT_STRUCT") didn't update the PERF_SAMPLE_WEIGHT_STRUCT sample type for perf script. For a new kernel on x86, the check fails. Use PERF_SAMPLE_WEIGHT_TYPE, which supports both sample types, to replace PERF_SAMPLE_WEIGHT Fixes: ea8d0ed6 ("perf tools: Support PERF_SAMPLE_WEIGHT_STRUCT") Reported-by:
Joe Mario <jmario@redhat.com> Reviewed-by:
Kajol Jain <kjain@linux.ibm.com> Signed-off-by:
Kan Liang <kan.liang@linux.intel.com> Tested-by:
Jiri Olsa <jolsa@redhat.com> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Jiri Olsa authored
Got following build fail on powerpc: CC arch/powerpc/util/skip-callchain-idx.o In function ‘check_return_reg’, inlined from ‘check_return_addr’ at arch/powerpc/util/skip-callchain-idx.c:213:7, inlined from ‘arch_skip_callchain_idx’ at arch/powerpc/util/skip-callchain-idx.c:265:7: arch/powerpc/util/skip-callchain-idx.c:54:18: error: ‘dwarf_frame_register’ accessing 96 bytes \ in a region of size 64 [-Werror=stringop-overflow=] 54 | result = dwarf_frame_register(frame, ra_regno, ops_mem, &ops, &nops); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/powerpc/util/skip-callchain-idx.c: In function ‘arch_skip_callchain_idx’: arch/powerpc/util/skip-callchain-idx.c:54:18: note: referencing argument 3 of type ‘Dwarf_Op *’ In file included from /usr/include/elfutils/libdwfl.h:32, from arch/powerpc/util/skip-callchain-idx.c:10: /usr/include/elfutils/libdw.h:1069:12: note: in a call to function ‘dwarf_frame_register’ 1069 | extern int dwarf_frame_register (Dwarf_Frame *frame, int regno, | ^~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors The dwarf_frame_register args changed with [1], Updating ops_mem accordingly. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=5621fe5443da23112170235dd5cac161e5c75e65Reviewed-by:Mark Wieelard <mjw@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: https://lore.kernel.org/r/20210928195253.1267023-1-jolsa@kernel.orgSigned-off-by:
-
Song Liu authored
When perf.data is not written cleanly, we would like to process existing data as much as possible (please see f_header.data.size == 0 condition in perf_session__read_header). However, perf.data with partial data may crash perf. Specifically, we see crash in 'perf script' for NULL session->header.env.arch. Fix this by checking session->header.env.arch before using it to determine native_arch. Also split the if condition so it is easier to read. Committer notes: If it is a pipe, we already assume is a native arch, so no need to check session->header.env.arch. Signed-off-by:
Song Liu <songliubraving@fb.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel-team@fb.com Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20211004053238.514936-1-songliubraving@fb.comSigned-off-by:
-
Adrian Hunter authored
The following build message: rm dlfilters/dlfilter-test-api-v0.o is unwanted. The object file is being treated as an intermediate file and being automatically removed. Mark the object file as .SECONDARY to prevent removal and hence the message. Requested-by:
Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/20210930062849.110416-1-adrian.hunter@intel.comSigned-off-by:
-
- 30 Oct, 2021 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Three small fixes, all in drivers, and one sizeable update to the UFS driver to remove the HPB 2.0 feature that has been objected to by Jens and Christoph. Although the UFS patch is large and last minute, it's essentially the least intrusive way of resolving the objections in time for the 5.15 release" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: ufshpb: Remove HPB2.0 flows scsi: mpt3sas: Fix reference tag handling for WRITE_INSERT scsi: ufs: ufs-exynos: Correct timeout value setting registers scsi: ibmvfc: Fix up duplicate response detection
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fix from Stephen Boyd: "One fix for the composite clk that broke when we changed this clk type to use the determine_rate instead of round_rate clk op by default. This caused lots of problems on Rockchip SoCs because they heavily use the composite clk code to model the clk tree" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: composite: Also consider .determine_rate for rate + mux composites
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: "These are pretty late, but they do fix concrete issues. - ensure the trap vector's address is aligned. - avoid re-populating the KASAN shadow memory. - allow kasan to build without warnings, which have recently become errors" * tag 'riscv-for-linus-5.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Fix asan-stack clang build riscv: Do not re-populate shadow memory with kasan_populate_early_shadow riscv: fix misalgned trap vector base address -
Avri Altman authored
The Host Performance Buffer feature allows UFS read commands to carry the physical media addresses along with the LBAs, thus allowing less internal L2P-table switches in the device. HPB1.0 allowed a single LBA, while HPB2.0 increases this capacity up to 255 blocks. Carrying more than a single record, the read operation is no longer purely of type "read" but a "hybrid" command: Writing the physical address to the device in one operation and reading back the required payload in another. The JEDEC HPB spec defines two commands for this operation: HPB-WRITE-BUFFER (0x2) to write the physical addresses to device, and HPB-READ to read the payload. With the current HPB design the UFS driver has no alternative but to divide the READ request into 2 separate commands: HPB-WRITE-BUFFER and HPB-READ. This causes a great deal of aggravation to the block layer guys who demanded that we completely revert the entire HPB driver regardless of the huge amount of corporate effort already invested in it. As a compromise, remove only the pieces that implement the 2.0 specification. This is done as a matter of urgency for the final 5.15 release. Link: https://lore.kernel.org/r/20211030062301.248-1-avri.altman@wdc.comTested-by:
Avri Altman <avri.altman@wdc.com> Tested-by:
Bean Huo <beanhuo@micron.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Three commits fixing some issues introduced with the recent IOMMU changes we merged. Thanks to Alexey Kardashevskiy" * tag 'powerpc-5.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries/iommu: Create huge DMA window if no MMIO32 is present powerpc/pseries/iommu: Check if the default window in use before removing it powerpc/pseries/iommu: Use correct vfree for it_map
-
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linuxLinus Torvalds authored
Pull gpio fixes from Bartosz Golaszewski: - fix the return value check when parsing the ngpios property in gpio-xgs-iproc - check the return value of bgpio_init() in gpio-mlxbf2 * tag 'gpio-fixes-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: mlxbf2.c: Add check for bgpio_init failure gpio: xgs-iproc: fix parsing of ngpios property
-
- 29 Oct, 2021 10 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - NVMe pull request: - fix nvmet-tcp header digest verification (Amit Engel) - fix a memory leak in nvmet-tcp when releasing a queue (Maurizio Lombardi) - fix nvme-tcp H2CData PDU send accounting again (Sagi Grimberg) - fix digest pointer calculation in nvme-tcp and nvmet-tcp (Varun Prakash) - fix possible nvme-tcp req->offset corruption (Varun Prakash) - Queue drain ordering fix (Ming) - Partition check regression for zoned devices (Shin'ichiro) - Zone queue restart fix (Naohiro) * tag 'block-5.15-2021-10-29' of git://git.kernel.dk/linux-block: block: Fix partition check for host-aware zoned block devices nvmet-tcp: fix header digest verification nvmet-tcp: fix data digest pointer calculation nvme-tcp: fix data digest pointer calculation nvme-tcp: fix possible req->offset corruption block: schedule queue restart after BLK_STS_ZONE_RESOURCE block: drain queue after disk is removed from sysfs nvme-tcp: fix H2CData PDU send accounting (again) nvmet-tcp: fix a memory leak when releasing a queue -
Martin K. Petersen authored
Testing revealed a problem with how the reference tag was handled for a WRITE_INSERT operation. The SCSI_PROT_REF_CHECK flag is not set when the controller is asked to generate the protection information (i.e. not DIX). And as a result the initial reference tag would not be set in the WRITE_INSERT case. Separate handling of the REF_CHECK and REF_INCREMENT flags to align with both the DIX spec and the MPI implementation. Link: https://lore.kernel.org/r/20211028034202.24225-1-martin.petersen@oracle.com Fixes: b3e2c72a ("scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: - tmio: Re-enable card irqs after a reset - mtk-sd: Fixup probing of cqhci for crypto - cqhci: Fix support for suspend/resume - vub300: Fix control-message timeouts - dw_mmc-exynos: Fix support for tuning - winbond: Silences build errors on M68K - sdhci-esdhc-imx: Fix support for tuning - sdhci-pci: Read card detect from ACPI for Intel Merrifield - sdhci: Fix eMMC support for Thundercomm TurboX CM2290 * tag 'mmc-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: tmio: reenable card irqs after the reset callback mmc: mediatek: Move cqhci init behind ungate clock mmc: cqhci: clear HALT state after CQE enable mmc: vub300: fix control-message timeouts mmc: dw_mmc: exynos: fix the finding clock sample value mmc: winbond: don't build on M68K mmc: sdhci-esdhc-imx: clear the buffer_read_ready to reset standard tuning circuit mmc: sdhci-pci: Read card detect from ACPI for Intel Merrifield mmc: sdhci: Map more voltage level to SDHCI_POWER_330
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "Last minute fixes for crash on 32bit architectures when compression is in use. It's a regression introduced in 5.15-rc and I'd really like not let this into the final release, fixes via stable trees would add unnecessary delay. The problem is on 32bit architectures with highmem enabled, the pages for compression may need to be kmapped, while the patches removed that as we don't use GFP_HIGHMEM allocations anymore. The pages that don't come from local allocation still may be from highmem. Despite being on 32bit there's enough such ARM machines in use so it's not a marginal issue. I did full reverts of the patches one by one instead of a huge one. There's one exception for the "lzo" revert as there was an intermediate patch touching the same code to make it compatible with subpage. I can't revert that one too, so the revert in lzo.c is manual. Qu Wenruo has worked on that with me and verified the changes" * tag 'for-5.15-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Revert "btrfs: compression: drop kmap/kunmap from lzo" Revert "btrfs: compression: drop kmap/kunmap from zlib" Revert "btrfs: compression: drop kmap/kunmap from zstd" Revert "btrfs: compression: drop kmap/kunmap from generic helpers"
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing comment fixes from Steven Rostedt: - Some bots have informed me that some of the ftrace functions kernel-doc has formatting issues. - Also, fix my snake instinct. * tag 'trace-v5.15-rc6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix misspelling of "missing" ftrace: Fix kernel-doc formatting issues
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fix from Herbert Xu: "Fix a build-time warning in x86/sm4" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: x86/sm4 - Fix invalid section entry size
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "11 patches. Subsystems affected by this patch series: mm (memcg, memory-failure, oom-kill, secretmem, vmalloc, hugetlb, damon, and tools), and ocfs2" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: tools/testing/selftests/vm/split_huge_page_test.c: fix application of sizeof to pointer mm/damon/core-test: fix wrong expectations for 'damon_split_regions_of()' mm: khugepaged: skip huge page collapse for special files mm, thp: bail out early in collapse_file for writeback page mm/vmalloc: fix numa spreading for large hash tables mm/secretmem: avoid letting secretmem_users drop to zero ocfs2: fix race between searching chunks and release journal_head from buffer_head mm/oom_kill.c: prevent a race between process_mrelease and exit_mmap mm: filemap: check if THP has hwpoisoned subpage for PMD page fault mm: hwpoison: remove the unnecessary THP check memcg: page_alloc: skip bulk allocator for __GFP_ACCOUNT
-
Alexandre Ghiti authored
Nathan reported that because KASAN_SHADOW_OFFSET was not defined in Kconfig, it prevents asan-stack from getting disabled with clang even when CONFIG_KASAN_STACK is disabled: fix this by defining the corresponding config. Reported-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
Alexandre Ghiti <alexandre.ghiti@canonical.com> Fixes: 8ad8b727 ("riscv: Add KASAN support") Cc: stable@vger.kernel.org Signed-off-by:
Palmer Dabbelt <palmerdabbelt@google.com>
-
Alexandre Ghiti authored
When calling this function, all the shadow memory is already populated with kasan_early_shadow_pte which has PAGE_KERNEL protection. kasan_populate_early_shadow write-protects the mapping of the range of addresses passed in argument in zero_pte_populate, which actually write-protects all the shadow memory mapping since kasan_early_shadow_pte is used for all the shadow memory at this point. And then when using memblock API to populate the shadow memory, the first write access to the kernel stack triggers a trap. This becomes visible with the next commit that contains a fix for asan-stack. We already manually populate all the shadow memory in kasan_early_init and we write-protect kasan_early_shadow_pte at the end of kasan_init which makes the calls to kasan_populate_early_shadow superfluous so we can remove them. Signed-off-by:
-
Steven Rostedt (VMware) authored
My snake instinct was on and I wrote "misssing" instead of "missing". Signed-off-by:Steven Rostedt (VMware) <rostedt@goodmis.org>
-
