Remove 2 kernel-doc descriptions to squelch warnings:

node.c:150: warning: Excess struct member 'inputq' description in 'tipc_node'
node.c:150: warning: Excess struct member 'namedq' description in 'tipc_node'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jon Maloy <jmaloy@redhat.com>
Cc: Ying Xue <ying.xue@windriver.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240123051152.23684-1-rdunlap@infradead.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Remove a kernel-doc description to squelch a warning:

socket.c:143: warning: Excess struct member 'blocking_link' description in 'tipc_sock'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jon Maloy <jmaloy@redhat.com>
Cc: Ying Xue <ying.xue@windriver.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240123051201.24701-1-rdunlap@infradead.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Implement port for given CID as input argument instead of using
hardcoded value '1234'. This allows to run different test instances
on a single CID. Port argument is not required parameter and if it is
not set, then default value will be '1234' - thus we preserve previous
behaviour.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This reverts commit a2a7f98a.

Konrad mentioned that Qualcomm appears to use these devices, still,
internally, even tho they never made it to the broader market.

Link: https://lore.kernel.org/all/0679f568-60e7-47d8-b86e-052a9eb4c103@linaro.org/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Shailend Chand says:

====================
gve: Alloc before freeing when changing config

Functions allocating resources did so directly into priv thus far. The
assumption doing that was that priv was not already holding references
to live resources.

When ring configuration is changed in any way from userspace, thus far
we relied on calling the ndo_stop and ndo_open callbacks in succession.
This meant that we teardown existing resources and rob the OS of
networking before we have successfully allocated resources for the new
config.

Correcting this requires us to perform allocations without editing priv.
That is what the "gve: Switch to config-aware..." patch does: it modifies
all the allocation paths so that they take a new configuration as input
and return references to newly allocated resources without modifying
priv or interfering with live resources in any way.

Having corrected the allocation paths so, the ndo open and close
callbacks are refactored to make available distinct functions for
allocating queue resources and starting or stopping them. This is then
put to use in the set_channels and set_features hooks in the last two
patches.

These changes have been tested by verifying the integrity of a stream of
integers while the driver is continuously reconfigured with ethtool.
====================

Link: https://lore.kernel.org/r/20240122182632.1102721-1-shailend@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Previously, existing queues were being freed before the resources for
the new queues were being allocated. This would take down the interface
if someone were to attempt to change feature flags under a resource
crunch.
Signed-off-by: Shailend Chand <shailend@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jeroen de Borst <jeroendb@google.com>
Link: https://lore.kernel.org/r/20240122182632.1102721-7-shailend@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Previously, existing queues were being freed before the resources for
the new queues were being allocated. This would take down the interface
if someone were to attempt to change queue counts under a resource
crunch.
Signed-off-by: Shailend Chand <shailend@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jeroen de Borst <jeroendb@google.com>
Link: https://lore.kernel.org/r/20240122182632.1102721-6-shailend@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

gve_open is rewritten to be composed of two funcs: gve_queues_mem_alloc
and gve_queues_start. The former only allocates queue resources without
doing anything to install the queues, which is taken up by the latter.
Similarly gve_close is split into gve_queues_stop and
gve_queues_mem_free.

Separating the acts of queue resource allocation and making the queue
become live help with subsequent changes that aim to not take down the
datapath when applying new configurations.
Signed-off-by: Shailend Chand <shailend@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jeroen de Borst <jeroendb@google.com>
Link: https://lore.kernel.org/r/20240122182632.1102721-5-shailend@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The new config-aware functions will help achieve the goal of being able
to allocate resources for new queues while there already are active
queues serving traffic.

These new functions work off of arbitrary queue allocation configs
rather than just the currently active config in priv, and they return
the newly allocated resources instead of writing them into priv.
Signed-off-by: Shailend Chand <shailend@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240122182632.1102721-4-shailend@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This change makes the napi poll functions non-static and moves the
gve_(add|remove)_napi functions to gve_utils.c, to make possible future
"start queue" hooks in the datapath files.
Signed-off-by: Shailend Chand <shailend@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240122182632.1102721-3-shailend@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Queue allocation functions currently can only allocate into priv and
free memory in priv. These new structs would be passed into the queue
functions in a subsequent change to make them capable of returning newly
allocated resources and not just writing them into priv. They also make
it possible to allocate resources for queues with a different config
than that of the currently active queues.
Signed-off-by: Shailend Chand <shailend@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240122182632.1102721-2-shailend@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In some configurations, the 'iter' variable in function
fib6_repair_tree() is unused, resulting the following warning when
compiled with W=1.

    net/ipv6/ip6_fib.c:1781:6: warning: variable 'iter' set but not used [-Wunused-but-set-variable]
     1781 |         int iter = 0;
	  |             ^

It is unclear what is the advantage of this RT6_TRACE() macro[1], since
users can control pr_debug() in runtime, which is better than at
compilation time. pr_debug() has no overhead when disabled.

Remove the RT6_TRACE() in favor of simple pr_debug() helpers.

[1] Link: https://lore.kernel.org/all/ZZwSEJv2HgI0cD4J@gmail.com/Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240122181955.2391676-2-leitao@debian.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In the ipv6 system, we have some logs basically dumping the name of the
function that is being called. This is not ideal, since ftrace give us
"for free". Moreover, checkpatch is not happy when touching that code:

	WARNING: Unnecessary ftrace-like logging - prefer using ftrace

Remove debug functions that only print the current function name.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240122181955.2391676-1-leitao@debian.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This SoC family was destined for server use, featuring Qualcomm's very
interesting Kryo cores (before "Kryo" became a marketing term for Arm
cores with small modifications). It did however not leave the labs of
Qualcomm and presumably some partners, nor was it ever productized.

Remove the related drivers, as they seem to be long obsolete.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Timur Tabi <timur@kernel.org>
Link: https://lore.kernel.org/r/20240122-topic-qdf_cleanup_net-v1-1-caf0d9c4408a@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Eric Dumazet says:

====================
inet_diag: remove three mutexes in diag dumps

Surprisingly, inet_diag operations are serialized over a stack
of three mutexes, giving legacy /proc based files an unfair
advantage on modern hosts.

This series removes all of them, making inet_diag operations
(eg iproute2/ss) fully parallel.

1-2) Two first patches are adding data-race annotations
     and can be backported to stable kernels.

3-4) inet_diag_table_mutex can be replaced with RCU protection,
     if we add corresponding protection against module unload.

5-7) sock_diag_table_mutex can be replaced with RCU protection,
     if we add corresponding protection against module unload.

 8)  sock_diag_mutex is removed, as the old bug it was
     working around has been fixed more elegantly.

 9)  inet_diag_dump_icsk() can skip over empty buckets to reduce
     spinlock contention.
====================

Link: https://lore.kernel.org/r/20240122112603.3270097-1-edumazet@google.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

After the removal of inet_diag_table_mutex, sock_diag_table_mutex
and sock_diag_mutex, I was able so see spinlock contention from
inet_diag_dump_icsk() when running 100 parallel invocations.

It is time to skip over empty buckets.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

sock_diag_rcv() is still serializing its operations using
a mutex, for no good reason.

This came with commit 0a9c7301 ("[INET_DIAG]: Fix oops
in netlink_rcv_skb"), but the root cause has been fixed
with commit cd40b7d3 ("[NET]: make netlink user -> kernel
interface synchronious")

Remove this mutex to let multiple threads run concurrently.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

TCPDIAG_GETSOCK and DCCPDIAG_GETSOCK diag are serialized
on sock_diag_table_mutex.

This is to make sure inet_diag module is not unloaded
while diag was ongoing.

It is time to get rid of this mutex and use RCU protection,
allowing full parallelism.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

sock_diag_broadcast_destroy_work() and __sock_diag_cmd()
are currently using sock_diag_table_mutex to protect
against concurrent sock_diag_handlers[] changes.

This makes inet_diag dump serialized, thus less scalable
than legacy /proc files.

It is time to switch to full RCU protection.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Following patch is going to use RCU instead of
sock_diag_table_mutex acquisition.

This patch is a preparation, no change of behavior yet.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

inet_diag_lock_handler() current implementation uses a mutex
to protect inet_diag_table[] array against concurrent changes.

This makes inet_diag dump serialized, thus less scalable
than legacy /proc files.

It is time to switch to full RCU protection.

As a bonus, if a target is statically linked instead of being
modular, inet_diag_lock_handler() & inet_diag_unlock_handler()
reduce to reads only.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Following patch is going to use RCU instead of
inet_diag_table_mutex acquisition.

This patch is a preparation, no change of behavior yet.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

inet_diag_lock_handler() reads inet_diag_table[proto] locklessly.

Use READ_ONCE()/WRITE_ONCE() annotations to avoid potential issues.

Fixes: d523a328 ("[INET]: Fix inet_diag dead-lock regression")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

__sock_diag_cmd() and sock_diag_bind() read sock_diag_handlers[family]
without a lock held.

Use READ_ONCE()/WRITE_ONCE() annotations to avoid potential issues.

Fixes: 8ef874bf ("sock_diag: Move the sock_ code to net/core/")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf and netfilter.

  Previous releases - regressions:

   - Revert "net: rtnetlink: Enslave device before bringing it up",
     breaks the case inverse to the one it was trying to fix

   - net: dsa: fix oob access in DSA's netdevice event handler
     dereference netdev_priv() before check its a DSA port

   - sched: track device in tcf_block_get/put_ext() only for clsact
     binder types

   - net: tls, fix WARNING in __sk_msg_free when record becomes full
     during splice and MORE hint set

   - sfp-bus: fix SFP mode detect from bitrate

   - drv: stmmac: prevent DSA tags from breaking COE

  Previous releases - always broken:

   - bpf: fix no forward progress in in bpf_iter_udp if output buffer is
     too small

   - bpf: reject variable offset alu on registers with a type of
     PTR_TO_FLOW_KEYS to prevent oob access

   - netfilter: tighten input validation

   - net: add more sanity check in virtio_net_hdr_to_skb()

   - rxrpc: fix use of Don't Fragment flag on RESPONSE packets, avoid
     infinite loop

   - amt: do not use the portion of skb->cb area which may get clobbered

   - mptcp: improve validation of the MPTCPOPT_MP_JOIN MCTCP option

  Misc:

   - spring cleanup of inactive maintainers"

* tag 'net-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
  i40e: Include types.h to some headers
  ipv6: mcast: fix data-race in ipv6_mc_down / mld_ifc_work
  selftests: mlxsw: qos_pfc: Adjust the test to support 8 lanes
  selftests: mlxsw: qos_pfc: Remove wrong description
  mlxsw: spectrum_router: Register netdevice notifier before nexthop
  mlxsw: spectrum_acl_tcam: Fix stack corruption
  mlxsw: spectrum_acl_tcam: Fix NULL pointer dereference in error path
  mlxsw: spectrum_acl_erp: Fix error flow of pool allocation failure
  ethtool: netlink: Add missing ethnl_ops_begin/complete
  selftests: bonding: Add more missing config options
  selftests: netdevsim: add a config file
  libbpf: warn on unexpected __arg_ctx type when rewriting BTF
  selftests/bpf: add tests confirming type logic in kernel for __arg_ctx
  bpf: enforce types for __arg_ctx-tagged arguments in global subprogs
  bpf: extract bpf_ctx_convert_map logic and make it more reusable
  libbpf: feature-detect arg:ctx tag support in kernel
  ipvs: avoid stat macros calls from preemptible context
  netfilter: nf_tables: reject NFT_SET_CONCAT with not field length description
  netfilter: nf_tables: skip dead set elements in netlink dump
  netfilter: nf_tables: do not allow mismatch field size and set key length
  ...

Pull i2c updates from Wolfram Sang:
 "This removes the currently unused CLASS_DDC support (controllers set
  the flag, but there is no client to use it).

  Also, CLASS_SPD support gets simplified to prepare removal in the
  future. Class based instantiation is not recommended these days
  anyhow.

  Furthermore, I2C core now creates a debugfs directory per I2C adapter.
  Current bus driver users were converted to use it.

  Finally, quite some driver updates. Standing out are patches for the
  wmt-driver which is refactored to support more variants.

  This is the rebased pull request where a large series for the
  designware driver was dropped"

* tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
  MAINTAINERS: use proper email for my I2C work
  i2c: stm32f7: add support for stm32mp25 soc
  i2c: stm32f7: perform I2C_ISR read once at beginning of event isr
  dt-bindings: i2c: document st,stm32mp25-i2c compatible
  i2c: stm32f7: simplify status messages in case of errors
  i2c: stm32f7: perform most of irq job in threaded handler
  i2c: stm32f7: use dev_err_probe upon calls of devm_request_irq
  i2c: i801: Add lis3lv02d for Dell XPS 15 7590
  i2c: i801: Add lis3lv02d for Dell Precision 3540
  i2c: wmt: Reduce redundant: REG_CR setting
  i2c: wmt: Reduce redundant: function parameter
  i2c: wmt: Reduce redundant: clock mode setting
  i2c: wmt: Reduce redundant: wait event complete
  i2c: wmt: Reduce redundant: bus busy check
  i2c: mux: reg: Remove class-based device auto-detection support
  i2c: make i2c_bus_type const
  dt-bindings: at24: add ROHM BR24G04
  eeprom: at24: use of_match_ptr()
  i2c: cpm: Remove linux,i2c-index conversion from be32
  i2c: imx: Make SDA actually optional for bus recovering
  ...

Pull RTC updates from Alexandre Belloni:
 "There are three new drivers this cycle. Also the cmos driver is
  getting fixes for longstanding wakeup issues on AMD.

  New drivers:
   - Analog Devices MAX31335
   - Nuvoton ma35d1
   - Texas Instrument TPS6594 PMIC RTC

  Drivers:
   - cmos: use ACPI alarm instead of HPET on recent AMD platforms
   - nuvoton: add NCT3015Y-R and NCT3018Y-R support
   - rv8803: proper suspend/resume and wakeup-source support"

* tag 'rtc-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (26 commits)
  rtc: nuvoton: Compatible with NCT3015Y-R and NCT3018Y-R
  rtc: da9063: Use dev_err_probe()
  rtc: da9063: Use device_get_match_data()
  rtc: da9063: Make IRQ as optional
  rtc: max31335: Fix comparison in max31335_volatile_reg()
  rtc: max31335: use regmap_update_bits_check
  rtc: max31335: remove unecessary locking
  rtc: max31335: add driver support
  dt-bindings: rtc: max31335: add max31335 bindings
  rtc: rv8803: add wakeup-source support
  rtc: ac100: remove misuses of kernel-doc
  rtc: class: Remove usage of the deprecated ida_simple_xx() API
  rtc: MAINTAINERS: drop Alessandro Zummo
  rtc: ma35d1: remove hardcoded UIE support
  dt-bindings: rtc: qcom-pm8xxx: fix inconsistent example
  rtc: rv8803: Add power management support
  rtc: ds3232: avoid unused-const-variable warning
  rtc: lpc24xx: add missing dependency
  rtc: tps6594: Add driver for TPS6594 RTC
  rtc: Add driver for Nuvoton ma35d1 rtc controller
  ...

Pull input updates from Dmitry Torokhov:

 - a new driver for Adafruit Seesaw gamepad device

 - Zforce touchscreen will handle standard device properties for axis
   swap/inversion

 - handling of advanced sensitivity settings in Microchip CAP11xx
   capacitive sensor driver

 - more drivers have been converted to use newer gpiod API

 - support for dedicated wakeup IRQs in gpio-keys dirver

 - support for slider gestures and OTP variants in iqs269a driver

 - atkbd will report keyboard version as 0xab83 in cases when GET ID
   command was skipped (to deal with problematic firmware on newer
   laptops), restoring the previous behavior

 - other assorted cleanups and changes

* tag 'input-for-v6.8-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (44 commits)
  Input: atkbd - use ab83 as id when skipping the getid command
  Input: driver for Adafruit Seesaw Gamepad
  dt-bindings: input: bindings for Adafruit Seesaw Gamepad
  Input: da9063_onkey - avoid explicitly setting input's parent
  Input: da9063_onkey - avoid using OF-specific APIs
  Input: iqs269a - add support for OTP variants
  dt-bindings: input: iqs269a: Add bindings for OTP variants
  Input: iqs269a - add support for slider gestures
  dt-bindings: input: iqs269a: Add bindings for slider gestures
  Input: gpio-keys - filter gpio_keys -EPROBE_DEFER error messages
  Input: zforce_ts - accept standard touchscreen properties
  dt-bindings: touchscreen: neonode,zforce: Use standard properties
  dt-bindings: touchscreen: convert neonode,zforce to json-schema
  dt-bindings: input: convert drv266x to json-schema
  Input: da9063 - use dev_err_probe()
  Input: da9063 - drop redundant prints in probe()
  Input: da9063 - simplify obtaining OF match data
  Input: as5011 - convert to GPIO descriptor
  Input: omap-keypad - drop optional GPIO support
  Input: tca6416-keypad - drop unused include
  ...

Pull phy updates from Vinod Koul:
 "New Support:

   - Qualcomm SM8650 UFS, PCIe and USB/DP Combo PHY, eUSB2 PHY, SDX75
     USB3, X1E80100 USB3 support

   - Mediatek MT8195 support

   - Rockchip RK3128 usb2 support

   - TI SGMII mode for J784S4

  Updates:

   - Qualcomm v7 register offsets updates

   - Mediatek tphy support for force phy mode switch"

* tag 'phy-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (34 commits)
  phy: ti: j721e-wiz: Add SGMII support in WIZ driver for J784S4
  phy: ti: gmii-sel: Enable SGMII mode for J784S4
  phy: qcom-qmp-usb: Add Qualcomm X1E80100 USB3 PHY support
  dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add X1E80100 USB PHY binding
  phy: qcom-qmp-combo: Add x1e80100 USB/DP combo phys
  dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Document X1E80100 compatible
  dt-bindings: phy: qcom: snps-eusb2: Document the X1E80100 compatible
  phy: mediatek: tphy: add support force phy mode switch
  dt-bindings: phy: mediatek: tphy: add a property for force-mode switch
  phy: phy-can-transceiver: insert space after include
  phy: qualcomm: phy-qcom-qmp-ufs: Rectify SM8550 UFS HS-G4 PHY Settings
  dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: fix path to header
  phy: renesas: phy-rcar-gen2: use select for GENERIC_PHY
  phy: qcom-qmp: qserdes-txrx: Add v7 register offsets
  phy: qcom-qmp: qserdes-txrx: Add V6 N4 register offsets
  phy: qcom-qmp: qserdes-com: Add v7 register offsets
  phy: qcom-qmp: pcs-usb: Add v7 register offsets
  phy: qcom-qmp: pcs: Add v7 register offsets
  phy: qcom-qmp: qserdes-txrx: Add some more v6.20 register offsets
  phy: qcom-qmp: qserdes-com: Add some more v6 register offsets
  ...

Pull soundwire updates from Vinod Koul:

 - Core: add concept of controller_id to deal with clear Controller /
   Manager hierarchy

 - bunch of qcom driver refactoring for qcom_swrm_stream_alloc_ports(),
   qcom_swrm_stream_alloc_ports() and setting controller id to hw master
   id

* tag 'soundwire-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: amd: drop bus freq calculation and set 'max_clk_freq'
  soundwire: generic_bandwidth_allocation use bus->params.max_dr_freq
  soundwire: qcom: set controller id to hw master id
  soundwire: fix initializing sysfs for same devices on different buses
  soundwire: bus: introduce controller_id
  soundwire: stream: constify sdw_port_config when adding devices
  soundwire: qcom: move sconfig in qcom_swrm_stream_alloc_ports() out of critical section
  soundwire: qcom: drop unneeded qcom_swrm_stream_alloc_ports() cleanup

Pull gpio fixes from Bartosz Golaszewski:
 "Apart from some regular driver fixes there's a relatively big revert
  of the locking changes that were introduced to GPIOLIB in this merge
  window.

  This is because it turned out that some legacy GPIO interfaces - that
  need to translate a number from the global GPIO numberspace to the
  address of the relevant descriptor, thus running a GPIO device lookup
  and taking the GPIO device list lock - are still used in old code from
  atomic context resulting in "scheduling while atomic" errors.

  I'll try to make the read-only part of the list access entirely
  lockless using SRCU but this will take some time so let's go back to
  the old global spinlock for now.

  Summary:

   - revert the changes aiming to use a read-write semaphore to protect
     the list of GPIO devices due to calls to legacy API taking that
     lock from atomic context in old code

   - fix inverted logic in DEFINE_FREE() for GPIO device references

   - check the return value of bgpio_init() in gpio-mlxbf3

   - fix node address in the DT bindings example for gpio-xilinx

   - fix signedness bug in gpio-rtd

   - fix kernel-doc warnings in gpio-en7523"

* tag 'gpio-fixes-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: revert the attempt to protect the GPIO device list with an rwsem
  gpio: EN7523: fix kernel-doc warnings
  gpiolib: Fix scope-based gpio_device refcounting
  gpio: mlxbf3: add an error code check in mlxbf3_gpio_probe
  dt-bindings: gpio: xilinx: Fix node address in gpio
  gpio: rtd: Fix signedness bug in probe

Pull pwm fixes from Uwe Kleine-König:

 - fix a duplicate cleanup in an error path introduced in
   this merge window

 - fix an out-of-bounds access

   In practise it doesn't happen - otherwise someone would have noticed
   since v5.17-rc1 I guess - because the device tree binding for the two
   drivers using of_pwm_single_xlate() only have args->args_count == 1.

   A device-tree that doesn't conform to the respective bindings could
   trigger that easily however.

 - correct the request callback of the jz4740 pwm driver which used
   dev_err_probe() long after .probe() completed.

   This is conceptually wrong because dev_err_probe() might call
   device_set_deferred_probe_reason() which is nonsensical after the
   driver is bound.

* tag 'pwm/for-6.8-2' of gitolite.kernel.org:pub/scm/linux/kernel/git/ukleinek/linux:
  pwm: jz4740: Don't use dev_err_probe() in .request()
  pwm: Fix out-of-bounds access in of_pwm_single_xlate()
  pwm: bcm2835: Remove duplicate call to clk_rate_exclusive_put()

Pull backlight updates from Lee Jones:
 "New Drivers:
   - Add support for Monolithic Power Systems MP3309C WLED Step-up Converter

  Fix-ups:
   - Use/convert to new/better APIs/helpers/MACROs instead of
     hand-rolling implementations
   - Device Tree Binding updates
   - Demote non-kerneldoc header comments
   - Improve error handling; return proper error values, simplify, avoid
     duplicates, etc
   - Convert over to the new (kinda) GPIOD API

  Bug Fixes:
   - Fix uninitialised local variable"

* tag 'backlight-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: hx8357: Convert to agnostic GPIO API
  backlight: ili922x: Add an error code check in ili922x_write()
  backlight: ili922x: Drop kernel-doc for local macros
  backlight: mp3309c: Fix uninitialized local variable
  backlight: pwm_bl: Use dev_err_probe
  backlight: mp3309c: Add support for MPS MP3309C
  dt-bindings: backlight: mp3309c: Remove two required properties

Pull dma-mapping fixes from Christoph Hellwig:

 - fix kerneldoc warnings (Randy Dunlap)

 - better bounds checking in swiotlb (ZhangPeng)

* tag 'dma-mapping-6.8-2024-01-18' of git://git.infradead.org/users/hch/dma-mapping:
  dma-debug: fix kernel-doc warnings
  swiotlb: check alloc_size before the allocation of a new memory pool

Pull memblock update from Mike Rapoport:
 "Code readability improvement.

  Use NUMA_NO_NODE instead of -1 as return value of
  memblock_search_pfn_nid() to improve code readability
  and consistency with the callers of that function"

* tag 'memblock-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock: Return NUMA_NO_NODE instead of -1 to improve code readability

Pull virtio updates from Michael Tsirkin:

 - vdpa/mlx5: support for resumable vqs

 - virtio_scsi: mq_poll support

 - 3virtio_pmem: support SHMEM_REGION

 - virtio_balloon: stay awake while adjusting balloon

 - virtio: support for no-reset virtio PCI PM

 - Fixes, cleanups

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vdpa/mlx5: Add mkey leak detection
  vdpa/mlx5: Introduce reference counting to mrs
  vdpa/mlx5: Use vq suspend/resume during .set_map
  vdpa/mlx5: Mark vq state for modification in hw vq
  vdpa/mlx5: Mark vq addrs for modification in hw vq
  vdpa/mlx5: Introduce per vq and device resume
  vdpa/mlx5: Allow modifying multiple vq fields in one modify command
  vdpa/mlx5: Expose resumable vq capability
  vdpa: Block vq property changes in DRIVER_OK
  vdpa: Track device suspended state
  scsi: virtio_scsi: Add mq_poll support
  virtio_pmem: support feature SHMEM_REGION
  virtio_balloon: stay awake while adjusting balloon
  vdpa: Remove usage of the deprecated ida_simple_xx() API
  virtio: Add support for no-reset virtio PCI PM
  virtio_net: fix missing dma unmap for resize
  vhost-vdpa: account iommu allocations
  vdpa: Fix an error handling path in eni_vdpa_probe()

Pull hwmonfix from Guenter Roeck:
 "Fix crash seen when instantiating npcm750-pwm-fan"

* tag 'hwmon-for-v6.8-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (npcm750-pwm-fan) Fix crash observed when instantiating nuvoton,npcm750-pwm-fan

Pull CXL (Compute Express Link) updates from Dan Williams:
 "The bulk of this update is support for enumerating the performance
  capabilities of CXL memory targets and connecting that to a platform
  CXL memory QoS class. Some follow-on work remains to hook up this data
  into core-mm policy, but that is saved for v6.9.

  The next significant update is unifying how CXL event records (things
  like background scrub errors) are processed between so called
  "firmware first" and native error record retrieval. The CXL driver
  handler that processes the record retrieved from the device mailbox is
  now the handler for that same record format coming from an EFI/ACPI
  notification source.

  This also contains miscellaneous feature updates, like Get Timestamp,
  and other fixups.

  Summary:

   - Add support for parsing the Coherent Device Attribute Table (CDAT)

   - Add support for calculating a platform CXL QoS class from CDAT data

   - Unify the tracing of EFI CXL Events with native CXL Events.

   - Add Get Timestamp support

   - Miscellaneous cleanups and fixups"

* tag 'cxl-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (41 commits)
  cxl/core: use sysfs_emit() for attr's _show()
  cxl/pci: Register for and process CPER events
  PCI: Introduce cleanup helpers for device reference counts and locks
  acpi/ghes: Process CXL Component Events
  cxl/events: Create a CXL event union
  cxl/events: Separate UUID from event structures
  cxl/events: Remove passing a UUID to known event traces
  cxl/events: Create common event UUID defines
  cxl/events: Promote CXL event structures to a core header
  cxl: Refactor to use __free() for cxl_root allocation in cxl_endpoint_port_probe()
  cxl: Refactor to use __free() for cxl_root allocation in cxl_find_nvdimm_bridge()
  cxl: Fix device reference leak in cxl_port_perf_data_calculate()
  cxl: Convert find_cxl_root() to return a 'struct cxl_root *'
  cxl: Introduce put_cxl_root() helper
  cxl/port: Fix missing target list lock
  cxl/port: Fix decoder initialization when nr_targets > interleave_ways
  cxl/region: fix x9 interleave typo
  cxl/trace: Pass UUID explicitly to event traces
  cxl/region: use %pap format to print resource_size_t
  cxl/region: Add dev_dbg() detail on failure to allocate HPA space
  ...

Pull VFIO updates from Alex Williamson:

 - Add debugfs support, initially used for reporting device migration
   state (Longfang Liu)

 - Fixes and support for migration dirty tracking across multiple IOVA
   regions in the pds-vfio-pci driver (Brett Creeley)

 - Improved IOMMU allocation accounting visibility (Pasha Tatashin)

 - Virtio infrastructure and a new virtio-vfio-pci variant driver, which
   provides emulation of a legacy virtio interfaces on modern virtio
   hardware for virtio-net VF devices where the PF driver exposes
   support for legacy admin queues, ie. an emulated IO BAR on an SR-IOV
   VF to provide driver ABI compatibility to legacy devices (Yishai
   Hadas & Feng Liu)

 - Migration fixes for the hisi-acc-vfio-pci variant driver (Shameer
   Kolothum)

 - Kconfig dependency fix for new virtio-vfio-pci variant driver (Arnd
   Bergmann)

* tag 'vfio-v6.8-rc1' of https://github.com/awilliam/linux-vfio: (22 commits)
  vfio/virtio: fix virtio-pci dependency
  hisi_acc_vfio_pci: Update migration data pointer correctly on saving/resume
  vfio/virtio: Declare virtiovf_pci_aer_reset_done() static
  vfio/virtio: Introduce a vfio driver over virtio devices
  vfio/pci: Expose vfio_pci_core_iowrite/read##size()
  vfio/pci: Expose vfio_pci_core_setup_barmap()
  virtio-pci: Introduce APIs to execute legacy IO admin commands
  virtio-pci: Initialize the supported admin commands
  virtio-pci: Introduce admin commands
  virtio-pci: Introduce admin command sending function
  virtio-pci: Introduce admin virtqueue
  virtio: Define feature bit for administration virtqueue
  vfio/type1: account iommu allocations
  vfio/pds: Add multi-region support
  vfio/pds: Move seq/ack bitmaps into region struct
  vfio/pds: Pass region info to relevant functions
  vfio/pds: Move and rename region specific info
  vfio/pds: Only use a single SGL for both seq and ack
  vfio/pds: Fix calculations in pds_vfio_dirty_sync
  MAINTAINERS: Add vfio debugfs interface doc link
  ...

Pull iommufd updates from Jason Gunthorpe:
 "This brings the first of three planned user IO page table invalidation
  operations:

   - IOMMU_HWPT_INVALIDATE allows invalidating the IOTLB integrated into
     the iommu itself. The Intel implementation will also generate an
     ATC invalidation to flush the device IOTLB as it unambiguously
     knows the device, but other HW will not.

  It goes along with the prior PR to implement userspace IO page tables
  (aka nested translation for VMs) to allow Intel to have full
  functionality for simple cases. An Intel implementation of the
  operation is provided.

  Also fix a small bug in the selftest mock iommu driver probe"

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
  iommufd/selftest: Check the bus type during probe
  iommu/vt-d: Add iotlb flush for nested domain
  iommufd: Add data structure for Intel VT-d stage-1 cache invalidation
  iommufd/selftest: Add coverage for IOMMU_HWPT_INVALIDATE ioctl
  iommufd/selftest: Add IOMMU_TEST_OP_MD_CHECK_IOTLB test op
  iommufd/selftest: Add mock_domain_cache_invalidate_user support
  iommu: Add iommu_copy_struct_from_user_array helper
  iommufd: Add IOMMU_HWPT_INVALIDATE
  iommu: Add cache_invalidate_user op