Add tune function for the HiSilicon Tune and Trace device. The interface
of tune is exposed through sysfs attributes of PTT PMU device.
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20220816114414.4092-4-yangyicong@huawei.comSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

HiSilicon PCIe tune and trace device(PTT) is a PCIe Root Complex integrated
Endpoint(RCiEP) device, providing the capability to dynamically monitor and
tune the PCIe traffic and trace the TLP headers.

Add the driver for the device to enable the trace function. Register PMU
device of PTT trace, then users can use trace through perf command. The
driver makes use of perf AUX trace function and support the following
events to configure the trace:

- filter: select Root port or Endpoint to trace
- type: select the type of traced TLP headers
- direction: select the direction of traced TLP headers
- format: select the data format of the traced TLP headers

This patch initially add basic trace support of PTT device.
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20220816114414.4092-3-yangyicong@huawei.comSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

The DMA operations of HiSilicon PTT device can only work properly with
identical mappings. So add a quirk for the device to force the domain
as passthrough.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20220816114414.4092-2-yangyicong@huawei.comSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

When building without CONFIG_CORESIGHT_CTI_INTEGRATION_REGS, there is a
warning about coresight_cti_reg_store() being unused in the file:

  drivers/hwtracing/coresight/coresight-cti-sysfs.c:184:16: warning: 'coresight_cti_reg_store' defined but not used [-Wunused-function]
    184 | static ssize_t coresight_cti_reg_store(struct device *dev,
        |                ^~~~~~~~~~~~~~~~~~~~~~~

This is expected as coresight_cti_reg_store() is only used in the
coresight_cti_reg_rw macro, which is only used in a block guarded by
CONFIG_CORESIGHT_CTI_INTEGRATION_REGS. Mark coresight_cti_reg_store() as
__maybe_unused to clearly indicate that the function may be unused
depending on the configuration.

Fixes: fbca79e5 ("coresight: cti-sysfs: Re-use same functions for similar sysfs register accessors")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20220901195055.1932340-1-nathan@kernel.orgSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

New csdev_access functions were added as part of the previous
refactor. In order to make them more consistent with the
existing ones, change any signed offset types to be unsigned.

Now that they are unsigned, stop using hi_off = -1 to signify
a single 32bit access. Instead just call the existing 32bit
accessors. This is also applied to other parts of the codebase,
and the coresight_{read,write}_reg_pair() functions can be
deleted.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220830172614.340962-6-james.clark@arm.comSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Currently each accessor macro creates an identical function which wastes
space in the text area and pollutes the ftrace function name list.
Change it so that the same function is used, but the register to access
is passed in as parameter rather than baked into each function.

Note that only the single accessor is used here and not
csdev_access_relaxed_read_pair() like in the previous commit, so
so a single unsigned offset value is stored instead.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220830172614.340962-5-james.clark@arm.comSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Currently each accessor macro creates an identical function which wastes
space in the text area and pollutes the ftrace function names. Change it
so that the same function is used, but the register to access is passed
in as parameter rather than baked into each function.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220830172614.340962-4-james.clark@arm.comSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

The coresight_device struct is available in the sysfs accessor, and this
contains a csdev_access struct which can be used to access registers.
Use this instead of passing in the type of each drvdata so that a common
function can be shared between all the cs drivers.

No functional changes.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220830172614.340962-3-james.clark@arm.comSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

The ability to use a custom function in this sysfs show function isn't
used so remove it.

No functional changes.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220830172614.340962-2-james.clark@arm.comSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Sync sysfs documentation pages to include the new ts_source (timestamp
source) interface.
Signed-off-by: German Gomez <german.gomez@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20220823160650.455823-3-james.clark@arm.comSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Add a new sysfs interface in /sys/bus/coresight/devices/etm<N>/ts_source
indicating the configured timestamp source when the ETM device driver
was probed.

The perf tool will use this information to detect if the trace data
timestamp matches the kernel time, enabling correlation of CoreSight
trace with perf events.
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20220823160650.455823-2-james.clark@arm.comSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

The Coresight TMC component may be behind an IOMMU which is the case for
the Arm Juno SoC and some Qualcomm SoCs. Add 'iommus' property to the
binding.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220721212718.1980905-2-robh@kernel.orgSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Coresight components may be in a power domain which is the case for the Arm
Juno board. Allow a single 'power-domains' entry for Coresight components.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20220721212718.1980905-1-robh@kernel.orgSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Since the commit in Fixes: tag, "coresight-cpu-debug.txt" has been turned
into "arm,coresight-cpu-debug.yaml".

Update the doc accordingly to avoid a 'make htmldocs' warning

Fixes: 66d05204 ("dt-bindings: arm: Convert CoreSight CPU debug to DT schema")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/c7f864854e9e03916017712017ff59132c51c338.1659251193.git.christophe.jaillet@wanadoo.frSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Use the possessive "its" instead of the contraction "it's"
where appropriate.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220715015925.12569-1-rdunlap@infradead.orgSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Pull irq fixes from Ingo Molnar:
 "Misc irqchip fixes: LoongArch driver fixes and a Hyper-V IOMMU fix"

* tag 'irq-urgent-2022-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/loongson-liointc: Fix an error handling path in liointc_init()
  irqchip/loongarch: Fix irq_domain_alloc_fwnode() abuse
  irqchip/loongson-pch-pic: Move find_pch_pic() into CONFIG_ACPI
  irqchip/loongson-eiointc: Fix a build warning
  irqchip/loongson-eiointc: Fix irq affinity setting
  iommu/hyper-v: Use helper instead of directly accessing affinity

Pull x86 kprobes fix from Ingo Molnar:
 "Fix a kprobes bug in JNG/JNLE emulation when a kprobe is installed at
  such instructions, possibly resulting in incorrect execution (the
  wrong branch taken)"

* tag 'perf-urgent-2022-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kprobes: Fix JNG/JNLE emulation

Pull tracing fixes from Steven Rostedt:
 "Various fixes for tracing:

   - Fix a return value of traceprobe_parse_event_name()

   - Fix NULL pointer dereference from failed ftrace enabling

   - Fix NULL pointer dereference when asking for registers from eprobes

   - Make eprobes consistent with kprobes/uprobes, filters and
     histograms"

* tag 'trace-v6.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Have filter accept "common_cpu" to be consistent
  tracing/probes: Have kprobes and uprobes use $COMM too
  tracing/eprobes: Have event probes be consistent with kprobes and uprobes
  tracing/eprobes: Fix reading of string fields
  tracing/eprobes: Do not hardcode $comm as a string
  tracing/eprobes: Do not allow eprobes to use $stack, or % for regs
  ftrace: Fix NULL pointer dereference in is_ftrace_trampoline when ftrace is dead
  tracing/perf: Fix double put of trace event when init fails
  tracing: React to error return from traceprobe_parse_event_name()

Make filtering consistent with histograms. As "cpu" can be a field of an
event, allow for "common_cpu" to keep it from being confused with the
"cpu" field of the event.

Link: https://lkml.kernel.org/r/20220820134401.513062765@goodmis.org
Link: https://lore.kernel.org/all/20220820220920.e42fa32b70505b1904f0a0ad@kernel.org/

Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 1e3bac71 ("tracing/histogram: Rename "cpu" to "common_cpu"")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Both $comm and $COMM can be used to get current->comm in eprobes and the
filtering and histogram logic. Make kprobes and uprobes consistent in this
regard and allow both $comm and $COMM as well. Currently kprobes and
uprobes only handle $comm, which is inconsistent with the other utilities,
and can be confusing to users.

Link: https://lkml.kernel.org/r/20220820134401.317014913@goodmis.org
Link: https://lore.kernel.org/all/20220820220442.776e1ddaf8836e82edb34d01@kernel.org/

Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 53305928 ("tracing: probeevent: Introduce new argument fetching code")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Currently, if a symbol "@" is attempted to be used with an event probe
(eprobes), it will cause a NULL pointer dereference crash.

Both kprobes and uprobes can reference data other than the main registers.
Such as immediate address, symbols and the current task name. Have eprobes
do the same thing.

For "comm", if "comm" is used and the event being attached to does not
have the "comm" field, then make it the "$comm" that kprobes has. This is
consistent to the way histograms and filters work.

Link: https://lkml.kernel.org/r/20220820134401.136924220@goodmis.org

Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c4 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Currently when an event probe (eprobe) hooks to a string field, it does
not display it as a string, but instead as a number. This makes the field
rather useless. Handle the different kinds of strings, dynamic, static,
relational/dynamic etc.

Now when a string field is used, the ":string" type can be used to display
it:

  echo "e:sw sched/sched_switch comm=$next_comm:string" > dynamic_events

Link: https://lkml.kernel.org/r/20220820134400.959640191@goodmis.org

Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c4 ("tracing: Add a probe that attaches to trace events")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The variable $comm is hard coded as a string, which is true for both
kprobes and uprobes, but for event probes (eprobes) it is a field name. In
most cases the "comm" field would be a string, but there's no guarantee of
that fact.

Do not assume that comm is a string. Not to mention, it currently forces
comm fields to fault, as string processing for event probes is currently
broken.

Link: https://lkml.kernel.org/r/20220820134400.756152112@goodmis.org

Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c4 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

While playing with event probes (eprobes), I tried to see what would
happen if I attempted to retrieve the instruction pointer (%rip) knowing
that event probes do not use pt_regs. The result was:

 BUG: kernel NULL pointer dereference, address: 0000000000000024
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] PREEMPT SMP PTI
 CPU: 1 PID: 1847 Comm: trace-cmd Not tainted 5.19.0-rc5-test+ #309
 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01
v03.03 07/14/2016
 RIP: 0010:get_event_field.isra.0+0x0/0x50
 Code: ff 48 c7 c7 c0 8f 74 a1 e8 3d 8b f5 ff e8 88 09 f6 ff 4c 89 e7 e8
50 6a 13 00 48 89 ef 5b 5d 41 5c 41 5d e9 42 6a 13 00 66 90 <48> 63 47 24
8b 57 2c 48 01 c6 8b 47 28 83 f8 02 74 0e 83 f8 04 74
 RSP: 0018:ffff916c394bbaf0 EFLAGS: 00010086
 RAX: ffff916c854041d8 RBX: ffff916c8d9fbf50 RCX: ffff916c255d2000
 RDX: 0000000000000000 RSI: ffff916c255d2008 RDI: 0000000000000000
 RBP: 0000000000000000 R08: ffff916c3a2a0c08 R09: ffff916c394bbda8
 R10: 0000000000000000 R11: 0000000000000000 R12: ffff916c854041d8
 R13: ffff916c854041b0 R14: 0000000000000000 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff916c9ea40000(0000)
knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000024 CR3: 000000011b60a002 CR4: 00000000001706e0
 Call Trace:
  <TASK>
  get_eprobe_size+0xb4/0x640
  ? __mod_node_page_state+0x72/0xc0
  __eprobe_trace_func+0x59/0x1a0
  ? __mod_lruvec_page_state+0xaa/0x1b0
  ? page_remove_file_rmap+0x14/0x230
  ? page_remove_rmap+0xda/0x170
  event_triggers_call+0x52/0xe0
  trace_event_buffer_commit+0x18f/0x240
  trace_event_raw_event_sched_wakeup_template+0x7a/0xb0
  try_to_wake_up+0x260/0x4c0
  __wake_up_common+0x80/0x180
  __wake_up_common_lock+0x7c/0xc0
  do_notify_parent+0x1c9/0x2a0
  exit_notify+0x1a9/0x220
  do_exit+0x2ba/0x450
  do_group_exit+0x2d/0x90
  __x64_sys_exit_group+0x14/0x20
  do_syscall_64+0x3b/0x90
  entry_SYSCALL_64_after_hwframe+0x46/0xb0

Obviously this is not the desired result.

Move the testing for TPARG_FL_TPOINT which is only used for event probes
to the top of the "$" variable check, as all the other variables are not
used for event probes. Also add a check in the register parsing "%" to
fail if an event probe is used.

Link: https://lkml.kernel.org/r/20220820134400.564426983@goodmis.org

Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c4 ("tracing: Add a probe that attaches to trace events")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

ftrace_startup does not remove ops from ftrace_ops_list when
ftrace_startup_enable fails:

register_ftrace_function
  ftrace_startup
    __register_ftrace_function
      ...
      add_ftrace_ops(&ftrace_ops_list, ops)
      ...
    ...
    ftrace_startup_enable // if ftrace failed to modify, ftrace_disabled is set to 1
    ...
  return 0 // ops is in the ftrace_ops_list.

When ftrace_disabled = 1, unregister_ftrace_function simply returns without doing anything:
unregister_ftrace_function
  ftrace_shutdown
    if (unlikely(ftrace_disabled))
            return -ENODEV;  // return here, __unregister_ftrace_function is not executed,
                             // as a result, ops is still in the ftrace_ops_list
    __unregister_ftrace_function
    ...

If ops is dynamically allocated, it will be free later, in this case,
is_ftrace_trampoline accesses NULL pointer:

is_ftrace_trampoline
  ftrace_ops_trampoline
    do_for_each_ftrace_op(op, ftrace_ops_list) // OOPS! op may be NULL!

Syzkaller reports as follows:
[ 1203.506103] BUG: kernel NULL pointer dereference, address: 000000000000010b
[ 1203.508039] #PF: supervisor read access in kernel mode
[ 1203.508798] #PF: error_code(0x0000) - not-present page
[ 1203.509558] PGD 800000011660b067 P4D 800000011660b067 PUD 130fb8067 PMD 0
[ 1203.510560] Oops: 0000 [#1] SMP KASAN PTI
[ 1203.511189] CPU: 6 PID: 29532 Comm: syz-executor.2 Tainted: G    B   W         5.10.0 #8
[ 1203.512324] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 1203.513895] RIP: 0010:is_ftrace_trampoline+0x26/0xb0
[ 1203.514644] Code: ff eb d3 90 41 55 41 54 49 89 fc 55 53 e8 f2 00 fd ff 48 8b 1d 3b 35 5d 03 e8 e6 00 fd ff 48 8d bb 90 00 00 00 e8 2a 81 26 00 <48> 8b ab 90 00 00 00 48 85 ed 74 1d e8 c9 00 fd ff 48 8d bb 98 00
[ 1203.518838] RSP: 0018:ffffc900012cf960 EFLAGS: 00010246
[ 1203.520092] RAX: 0000000000000000 RBX: 000000000000007b RCX: ffffffff8a331866
[ 1203.521469] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000000000000010b
[ 1203.522583] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffff8df18b07
[ 1203.523550] R10: fffffbfff1be3160 R11: 0000000000000001 R12: 0000000000478399
[ 1203.524596] R13: 0000000000000000 R14: ffff888145088000 R15: 0000000000000008
[ 1203.525634] FS:  00007f429f5f4700(0000) GS:ffff8881daf00000(0000) knlGS:0000000000000000
[ 1203.526801] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1203.527626] CR2: 000000000000010b CR3: 0000000170e1e001 CR4: 00000000003706e0
[ 1203.528611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1203.529605] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Therefore, when ftrace_startup_enable fails, we need to rollback registration
process and remove ops from ftrace_ops_list.

Link: https://lkml.kernel.org/r/20220818032659.56209-1-yangjihong1@huawei.comSuggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

If in perf_trace_event_init(), the perf_trace_event_open() fails, then it
will call perf_trace_event_unreg() which will not only unregister the perf
trace event, but will also call the put() function of the tp_event.

The problem here is that the trace_event_try_get_ref() is called by the
caller of perf_trace_event_init() and if perf_trace_event_init() returns a
failure, it will then call trace_event_put(). But since the
perf_trace_event_unreg() already called the trace_event_put() function, it
triggers a WARN_ON().

 WARNING: CPU: 1 PID: 30309 at kernel/trace/trace_dynevent.c:46 trace_event_dyn_put_ref+0x15/0x20

If perf_trace_event_reg() does not call the trace_event_try_get_ref() then
the perf_trace_event_unreg() should not be calling trace_event_put(). This
breaks symmetry and causes bugs like these.

Pull out the trace_event_put() from perf_trace_event_unreg() and call it
in the locations that perf_trace_event_unreg() is called. This not only
fixes this bug, but also brings back the proper symmetry of the reg/unreg
vs get/put logic.

Link: https://lore.kernel.org/all/cover.1660347763.git.kjlx@templeofstupid.com/
Link: https://lkml.kernel.org/r/20220816192817.43d5e17f@gandalf.local.home

Cc: stable@vger.kernel.org
Fixes: 1d18538e ("tracing: Have dynamic events have a ref counter")
Reported-by: Krister Johansen <kjlx@templeofstupid.com>
Reviewed-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Krister Johansen <kjlx@templeofstupid.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The function traceprobe_parse_event_name() may set the first two function
arguments to a non-null value and still return -EINVAL to indicate an
unsuccessful completion of the function. Hence, it is not sufficient to
just check the result of the two function arguments for being not null,
but the return value also needs to be checked.

Commit 95c104c3 ("tracing: Auto generate event name when creating a
group of events") changed the error-return-value checking of the second
traceprobe_parse_event_name() invocation in __trace_eprobe_create() and
removed checking the return value to jump to the error handling case.

Reinstate using the return value in the error-return-value checking.

Link: https://lkml.kernel.org/r/20220811071734.20700-1-lukas.bulwahn@gmail.com

Fixes: 95c104c3 ("tracing: Auto generate event name when creating a group of events")
Acked-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Pull i2c fixes from Wolfram Sang:
 "A revert to fix a regression introduced this merge window and a fix
  for proper error handling in the remove path of the iMX driver"

* tag 'i2c-for-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: imx: Make sure to unregister adapter on remove()
  Revert "i2c: scmi: Replace open coded device_get_match_data()"

Pull cifs client fixes from Steve French:

 - memory leak fix

 - two small cleanups

 - trivial strlcpy removal

 - update missing entry for cifs headers in MAINTAINERS file

* tag '6.0-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: move from strlcpy with unused retval to strscpy
  cifs: Fix memory leak on the deferred close
  cifs: remove useless parameter 'is_fsctl' from SMB2_ioctl()
  cifs: remove unused server parameter from calc_smb_size()
  cifs: missing directory in MAINTAINERS file

GCC has supported asm goto since 4.5, and Clang has since version 9.0.0.
The minimum supported versions of these tools for the build according to
Documentation/process/changes.rst are 5.1 and 11.0.0 respectively.

Remove the feature detection script, Kconfig option, and clean up some
fallback code that is no longer supported.

The removed script was also testing for a GCC specific bug that was
fixed in the 4.7 release.

Also remove workarounds for bpftrace using clang older than 9.0.0, since
other BPF backend fixes are required at this point.

Link: https://lore.kernel.org/lkml/CAK7LNATSr=BXKfkdW8f-H5VT_w=xBpT2ZQcZ7rm6JfkdE+QnmA@mail.gmail.com/
Link: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=48637Acked-by: Borislav Petkov <bp@suse.de>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If for whatever reasons pm_runtime_resume_and_get() fails and .remove() is
exited early, the i2c adapter stays around and the irq still calls its
handler, while the driver data and the register mapping go away. So if
later the i2c adapter is accessed or the irq triggers this results in
havoc accessing freed memory and unmapped registers.

So unregister the software resources even if resume failed, and only skip
the hardware access in that case.

Fixes: 588eb93e ("i2c: imx: add runtime pm support to improve the performance")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

This reverts commit 9ae551de. We got a
regression report, so ensure this machine boots again. We will come back
with a better version hopefully.
Reported-by: Josef Johansson <josef@oderland.se>
Link: https://lore.kernel.org/r/4d2d5b04-0b6c-1cb1-a63f-dc06dfe1b5da@oderland.seSigned-off-by: Wolfram Sang <wsa@kernel.org>

Merge tag 'kbuild-fixes-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix module versioning broken on some architectures

 - Make dummy-tools enable CONFIG_PPC_LONG_DOUBLE_128

 - Remove -Wformat-zero-length, which has no warning instance

 - Fix the order between drivers and libs in modules.order

 - Fix false-positive warnings in clang-analyzer

* tag 'kbuild-fixes-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  scripts/clang-tools: Remove DeprecatedOrUnsafeBufferHandling check
  kbuild: fix the modules order between drivers and libs
  scripts/Makefile.extrawarn: Do not disable clang's -Wformat-zero-length
  kbuild: dummy-tools: pretend we understand __LONG_DOUBLE_128__
  modpost: fix module versioning when a symbol lacks valid CRC

Merge tag 'perf-tools-fixes-for-v6.0-2022-08-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix alignment for cpu map masks in event encoding.

 - Support reading PERF_FORMAT_LOST, perf tool counterpart for a feature
   that was added in this merge window.

 - Sync perf tools copies of kernel headers: socket, msr-index, fscrypt,
   cpufeatures, i915_drm, kvm, vhost, perf_event.

* tag 'perf-tools-fixes-for-v6.0-2022-08-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf tools: Support reading PERF_FORMAT_LOST
  libperf: Add a test case for read formats
  libperf: Handle read format in perf_evsel__read()
  tools headers UAPI: Sync linux/perf_event.h with the kernel sources
  tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
  tools headers UAPI: Sync KVM's vmx.h header with the kernel sources
  tools include UAPI: Sync linux/vhost.h with the kernel sources
  tools headers kvm s390: Sync headers with the kernel sources
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers cpufeatures: Sync with the kernel sources
  tools headers UAPI: Sync linux/fscrypt.h with the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  perf beauty: Update copy of linux/socket.h with the kernel sources
  perf cpumap: Fix alignment for masks in event encoding
  perf cpumap: Compute mask size in constant time
  perf cpumap: Synthetic events and const/static
  perf cpumap: Const map for max()

Pull s390 updates from Alexander Gordeev:

 - Fix a KVM crash on z12 and older machines caused by a wrong
   assumption that Query AP Configuration Information is always
   available.

 - Lower severity of excessive Hypervisor filesystem error messages
   when booting under KVM.

* tag 's390-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/ap: fix crash on older machines based on QCI info missing
  s390/hypfs: avoid error message under KVM

Pull powerpc fixes from Michael Ellerman:

 - Fix atomic sleep warnings at boot due to get_phb_number() taking a
   mutex with a spinlock held on some machines.

 - Add missing PMU selftests to .gitignores.

Thanks to Guenter Roeck and Russell Currey.

* tag 'powerpc-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  selftests/powerpc: Add missing PMU selftests to .gitignores
  powerpc/pci: Fix get_phb_number() locking

Pull rdma fixes from Jason Gunthorpe:
 "A few minor fixes:

   - Fix buffer management in SRP to correct a regression with the login
     authentication feature from v5.17

   - Don't iterate over non-present ports in mlx5

   - Fix an error introduced by the foritify work in cxgb4

   - Two bug fixes for the recently merged ERDMA driver

   - Unbreak RDMA dmabuf support, a regresion from v5.19"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA: Handle the return code from dma_resv_wait_timeout() properly
  RDMA/erdma: Correct the max_qp and max_cq capacities of the device
  RDMA/erdma: Using the key in FMR WR instead of MR structure
  RDMA/cxgb4: fix accept failure due to increased cpl_t5_pass_accept_rpl size
  RDMA/mlx5: Use the proper number of ports
  IB/iser: Fix login with authentication

This `clang-analyzer` check flags the use of memset(), suggesting a more
secure version of the API, such as memset_s(), which does not exist in
the kernel:

  warning: Call to function 'memset' is insecure as it does not provide
  security checks introduced in the C11 standard. Replace with analogous
  functions that support length arguments or provides boundary checks such
  as 'memset_s' in case of C11
  [clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling]
Signed-off-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Commit b2c88554 ("kbuild: update modules.order only when contained
modules are updated") accidentally changed the modules order.

Prior to that commit, the modules order was determined based on
vmlinux-dirs, which lists core-y/m, drivers-y/m, libs-y/m, in this order.

Now, subdir-modorder lists them in a different order: core-y/m, libs-y/m,
drivers-y/m.

Presumably, there was no practical issue because the modules in drivers
and libs are orthogonal, but there is no reason to have this distortion.

Get back to the original order.

Fixes: b2c88554 ("kbuild: update modules.order only when contained modules are updated")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>