Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.

Fixes: aca951a2 ("[PATCH] input-driver-yealink-P1K-usb-phone")
Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: stable@vger.kernel.org	# 2.6.14
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack control-interface endpoints.

Fixes: 628329d5 ("Input: add IMS Passenger Control Unit driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: stable@vger.kernel.org	# 3.10
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.

Fixes: c04148f9 ("Input: add driver for USB VoIP phones with CM109...")
Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: stable@vger.kernel.org	# 2.6.28
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory that lie beyond the end of the endpoint
array should a malicious device lack the expected endpoints.
Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

EeeBook X205TA is yet another ASUS device with a special touchpad
firmware that needs to be accounted for during initialization, or
else the touchpad will go into an invalid state upon suspend/resume.
Adding the appropriate ic_type and product_id check fixes the problem.
Signed-off-by: Matjaz Hegedic <matjaz.hegedic@gmail.com>
Acked-by: KT Liao <kt.liao@emc.com.tw>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

TUXEDO BU1406 does not implement active multiplexing mode properly,
and takes around 550 ms in i8042_set_mux_mode(). Given that the
device does not have external AUX port, there is no downside in
disabling the MUX mode.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Suggested-by: Vojtech Pavlik <vojtech@suse.cz>
Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

If the platform data has f30_data.disable set, f30 in rmi_f30_config()
might be null. Prevent a kernel oops by checking for non-null f30.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The aux port does not get detected without noloop quirk, so external PS/2
mouse cannot work as result.

The PS/2 mouse can work with this quirk.

BugLink: https://bugs.launchpad.net/bugs/1591053Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Prepare input updates for 4.11 merge window.

The I2C core always reports a MODALIAS of the form i2c:<foo> even if the
device was registered via OF, this means that exporting the OF device ID
table device aliases in the module is not needed. But in order to change
how the core reports modaliases to user-space, it's better to export it.

Before this patch:

$ modinfo drivers/input/touchscreen/zet6223.ko | grep alias
alias:          i2c:zet6223

After this patch:

$ modinfo drivers/input/touchscreen/zet6223.ko | grep alias
alias:          of:N*T*Czeitec,zet6223C*
alias:          of:N*T*Czeitec,zet6223
alias:          i2c:zet6223
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge in cros-ec changes applied through MFD branch to resolve
conflicts.

Add switch to report tablet mode.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo Serra <enric.balletbo@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

ELAN0605 has been confirmed to be a variant of ELAN0600, which is
blacklisted in the hid-core to be managed by elan_i2c. This device can be
found in Lenovo ideapad 310s (80U4000).
Signed-off-by: Hiroka IHARA <ihara_h@live.jp>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Instead of supporting legacy platform data (of which we have no mainline
users) and OF-based properties, let's switch to generic device properties.
This will still allow legacy boards to use the driver (by defining property
sets and attaching them to the drivers) and will simplify probe and make
driver usable on ACPI-based systems as well.
Reviewed-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

In case of an optional regulator missing, regulator core will return
ERR_PTR(-ENOENT) and not NULL, so the check for missing regulator is
incorrect. Also, the regulator is not optional, it may simply be missing
from platform description, so let's use devm_regulator_get() and rely on
regulator core to give us dummy supply when real one is not available.

Fixes: d257f298 ("Input: tsc2005 - convert to gpiod")
Acked-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

To be prepared for SPI module loading using full compatible strings from
device tree, let's add OF module device table data.
Reviewed-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This is a basic driver for the Zeitec ZET6223 I2C touchscreen
controllers. The driver does not support firmware loading, which is not
required for all tablets which contain this chip.
Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Postpone axis initialization to the first open instead of doing it
in joydev_connect. This is to make sure the generated startup events
are representative of the current joystick state rather than what
it was when joydev_connect() was called, potentially much earlier.
Once the first user is connected to joydev node we'll be updating
joydev->abs[] values and subsequent clients will be getting correct
initial states as well.

This solves issues with joystick driven menus that start scrolling
up each time they are started, until the user moves the joystick to
generate events. In emulator menu setups where the menu program is
restarted every time the game exits, the repeated need to move the
joystick to stop the unintended scrolling gets old rather quickly...
Signed-off-by: Raphael Assenat <raph@raphnet.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

On the latest series of ThinkPads, the button events for the TrackPoint
are reported through the touchpad itself as opposed to the TrackPoint
device. In order to report these buttons properly, we need to forward
them to the TrackPoint device and notify psmouse to send the button
presses/releases.
Signed-off-by: Lyude Paul <thatslyude@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This patch does several cleanup changes to F30 code

- switch to using BIT() macro
- use DIV_ROUND_UP() where appropriate
- factor out code setting up and reporting buttons
- use single loop when reporting buttons: arithmetic is cheap compared to
  conditionals and associated branch misprediction.
Tested-By: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Instead of using custom method of "passing" extended buttons from the
touchpad to trackstick, let's switch to the newly introduced SERIO_OOB_DATA
channel.
Tested-By: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The tracksticks on the Lenovo thinkpads have their buttons connected
through the touchpad device. We already fixed that in synaptics.c, but
when we switch the device into RMI4 mode to have proper support, the
pass-through functionality can't deal with them easily.

We add a new PS/2 flag and protocol designed for psmouse.  The RMI4 F03
pass-through can then emit a special set of commands to notify psmouse the
state of the buttons.

This patch implements the protocol in psmouse, while an other will
do the same for rmi4-f03.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

On some newer boards using mkbp we're hooking up non-matrix buttons and
switches to the EC but NOT to the main application processor.

Let's add kernel support to handle this.  Rather than creating a whole
new input driver, we'll continue to use cros_ec_keyb and just report the
new keys.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Add the defines for the new buttons and switches connected to the CrosEC.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

With CONFIG_SERIO=m, we get a build error for the rmi4-f03 driver,
added in linux-4.10:

warning: (HID_RMI) selects RMI4_F03 which has unmet direct dependencies (!UML && INPUT && RMI4_CORE && (SERIO=y || RMI4_CORE=SERIO))
drivers/input/built-in.o: In function `rmi_f03_attention':
rmi_f03.c:(.text+0xcfe0): undefined reference to `serio_interrupt'
rmi_f03.c:(.text+0xd055): undefined reference to `serio_interrupt'
drivers/input/built-in.o: In function `rmi_f03_remove':
rmi_f03.c:(.text+0xd115): undefined reference to `serio_unregister_port'
drivers/input/built-in.o: In function `rmi_f03_probe':
rmi_f03.c:(.text+0xd209): undefined reference to `__serio_register_port'

An earlier patch tried to fix this, but missed the HID_RMI driver that
does a 'select' on the F03 backend.

This adds a hidden Kconfig symbol that enforces 'serio' to be enabled
when RMI4-F03 is, which covers all cases.

Fixes: d7ddad0a ("Input: synaptics-rmi4 - fix F03 build error when serio is module")
Fixes: c5e8848f ("Input: synaptics-rmi4 - add support for F03")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Fix to return error code -ENOMEM from the devm_kzalloc() error handling
case instead of 0, as done elsewhere in this function.

Fixes: 6bd0dcfa ("Input: synaptics-rmi4 - factor out functions
from probe")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Set the LED_CORE_SUSPENDRESUME flag on our LED device so the
LED state will be automatically restored by LED core on resume.

Since Xbox One pads stop flashing only when reinitialized, we'll
send them the initialization packet so they calm down too.
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Bring in latest RMI4 support in preparation to the merge window.

If a function needs to communicate with an other, it's better to have
a way to retrieve this other.
Reviewed-by: Andrew Duggan <aduggan@synaptics.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The Xbox One S requires an ack to its mode button report, otherwise it
continuously retransmits the report. This makes the mode button appear to
be stuck down after it is pressed for the first time.
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We have a nice macro ensuring that the value is within certain range, let's
use it instead of open-coding.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

If device is supposed to send absolute events (i.e. EV_ABS bit is set in
dev->evbit) but dev->absinfo is not allocated, then the driver has done
something wrong, and we should not register such device. Otherwise we'll
crash later, when driver tries to send absolute event.
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

If user tries to initialize uinput device mixing old and new style
initialization (i.e. using old UI_SET_ABSBIT instead of UI_ABS_SETUP,
we forget to allocate input->absinfo and will crash when trying to send
absolute events:

        ioctl(ui, UI_DEV_SETUP, &us);
        ioctl(ui, UI_SET_PHYS, "Test");

        ioctl(ui, UI_SET_EVBIT, EV_ABS);
        ioctl(ui, UI_SET_ABSBIT, ABS_X);
        ioctl(ui, UI_SET_ABSBIT, ABS_Y);
        ioctl(ui, UI_DEV_CREATE, 0);
Reported-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=191811
Fixes: fbae10db ("Input: uinput - rework ABS validation")
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

These attributes provide various bits of information which may be enumerated
under the RMI4 protocol to user space.

This may be useful for displaying the particular version which is in use, or
selecting the correct firmware to flash.
Signed-off-by: Nick Dyer <nick@shmanahar.org>
Tested-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The attribute returns the percentage complete. If the firmware update fails, it
reports a negative error code.
Signed-off-by: Nick Dyer <nick@shmanahar.org>
Tested-by: Chris Healy <cphealy@gmail.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Evdev interface has been available for many years and by now everyone
is switched to using it, so let's stop offering /dev/input/mouseN
and /dev/psaux by default.
Acked-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Let's drop legacy platform data support (there are no users in mainline)
and switch to using generic device properties, which will make the driver
simpler (non-OF boards can use property sets to describe hardware).
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Instead of being OF-specific, let's switch to using generic device
properties, which will make this code usable on ACPI, device tree and
legacy boards that use property sets.

As part of the change let's rename matrix_keypad_parse_of_params() to
matrix_keypad_parse_properties().
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

These tests are reversed.  A warning should be displayed if an error is
returned, not on success.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The MPU3050 driver in the input subsystem has been superseded by a proper
IIO driver found in drivers/iio/gyro/mpu3050*.

Patches have been submitted to remove all defconfig and related references
to the old driver and replace this input driver with the IIO driver.

So delete the input driver. Input was never a good fit for sensors anyway.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>