- 20 May, 2020 27 commits
-
-
Sabrina Dubroca authored
commit c4e85f73 upstream. This will be used in the conversion of ipv6_stub to ip6_dst_lookup_flow, as some modules currently pass a net argument without a socket to ip6_dst_lookup. This is equivalent to commit 343d60aa ("ipv6: change ipv6_stub_impl.ipv6_dst_lookup to take net argument"). Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
David S. Miller <davem@davemloft.net> [bwh: Backported to 4.9: adjust context] Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Shijie Luo authored
commit af133ade upstream. When journal size is set too big by "mkfs.ext4 -J size=", or when we mount a crafted image to make journal inode->i_size too big, the loop, "while (i < num)", holds cpu too long. This could cause soft lockup. [ 529.357541] Call trace: [ 529.357551] dump_backtrace+0x0/0x198 [ 529.357555] show_stack+0x24/0x30 [ 529.357562] dump_stack+0xa4/0xcc [ 529.357568] watchdog_timer_fn+0x300/0x3e8 [ 529.357574] __hrtimer_run_queues+0x114/0x358 [ 529.357576] hrtimer_interrupt+0x104/0x2d8 [ 529.357580] arch_timer_handler_virt+0x38/0x58 [ 529.357584] handle_percpu_devid_irq+0x90/0x248 [ 529.357588] generic_handle_irq+0x34/0x50 [ 529.357590] __handle_domain_irq+0x68/0xc0 [ 529.357593] gic_handle_irq+0x6c/0x150 [ 529.357595] el1_irq+0xb8/0x140 [ 529.357599] __ll_sc_atomic_add_return_acquire+0x14/0x20 [ 529.357668] ext4_map_blocks+0x64/0x5c0 [ext4] [ 529.357693] ext4_setup_system_zone+0x330/0x458 [ext4] [ 529.357717] ext4_fill_super+0x2170/0x2ba8 [ext4] [ 529.357722] mount_bdev+0x1a8/0x1e8 [ 529.357746] ext4_mount+0x44/0x58 [ext4] [ 529.357748] mount_fs+0x50/0x170 [ 529.357752] vfs_kern_mount.part.9+0x54/0x188 [ 529.357755] do_mount+0x5ac/0xd78 [ 529.357758] ksys_mount+0x9c/0x118 [ 529.357760] __arm64_sys_mount+0x28/0x38 [ 529.357764] el0_svc_common+0x78/0x130 [ 529.357766] el0_svc_handler+0x38/0x78 [ 529.357769] el0_svc+0x8/0xc [ 541.356516] watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [mount:18674] Link: https://lore.kernel.org/r/20200211011752.29242-1-luoshijie1@huawei.comReviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Shijie Luo <luoshijie1@huawei.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
-
Kees Cook authored
commit 7be3cb01 upstream. When brk was moved for binaries without an interpreter, it should have been limited to ET_DYN only. In other words, the special case was an ET_DYN that lacks an INTERP, not just an executable that lacks INTERP. The bug manifested for giant static executables, where the brk would end up in the middle of the text area on 32-bit architectures. Reported-and-tested-by:
Richard Kojedzinszky <richard@kojedz.in> Fixes: bbdc6076 ("binfmt_elf: move brk out of mmap when doing direct loader exec") Cc: stable@vger.kernel.org Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ivan Delalande authored
commit e08df079 upstream. If the trapping instruction contains a ':', for a memory access through segment registers for example, the sed substitution will insert the '*' marker in the middle of the instruction instead of the line address: 2b: 65 48 0f c7 0f cmpxchg16b %gs:*(%rdi) <-- trapping instruction I started to think I had forgotten some quirk of the assembly syntax before noticing that it was actually coming from the script. Fix it to add the address marker at the right place for these instructions: 28: 49 8b 06 mov (%r14),%rax 2b:* 65 48 0f c7 0f cmpxchg16b %gs:(%rdi) <-- trapping instruction 30: 0f 94 c0 sete %al Fixes: 18ff44b1 ("scripts/decodecode: make faulting insn ptr more robust") Signed-off-by:
Ivan Delalande <colona@arista.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20200419223653.GA31248@visorSigned-off-by:
-
Josh Poimboeuf authored
commit d8dd25a4 upstream. When the current frame address (CFA) is stored on the stack (i.e., cfa->base == CFI_SP_INDIRECT), objtool neglects to adjust the stack offset when there are subsequent pushes or pops. This results in bad ORC data at the end of the ENTER_IRQ_STACK macro, when it puts the previous stack pointer on the stack and does a subsequent push. This fixes the following unwinder warning: WARNING: can't dereference registers at 00000000f0a6bdba for ip interrupt_entry+0x9f/0xa0 Fixes: 627fce14 ("objtool: Add ORC unwind table generation") Reported-by:
Vince Weaver <vincent.weaver@maine.edu> Reported-by:
Dave Jones <dsj@fb.com> Reported-by:
Steven Rostedt <rostedt@goodmis.org> Reported-by:
Vegard Nossum <vegard.nossum@oracle.com> Reported-by:
Joe Mario <jmario@redhat.com> Reviewed-by:
Miroslav Benes <mbenes@suse.cz> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/853d5d691b29e250333332f09b8e27410b2d9924.1587808742.git.jpoimboe@redhat.comSigned-off-by:
-
Xiyu Yang authored
commit 6f91a3f7 upstream. batadv_v_ogm_process() invokes batadv_hardif_neigh_get(), which returns a reference of the neighbor object to "hardif_neigh" with increased refcount. When batadv_v_ogm_process() returns, "hardif_neigh" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one exception handling paths of batadv_v_ogm_process(). When batadv_v_ogm_orig_get() fails to get the orig node and returns NULL, the refcnt increased by batadv_hardif_neigh_get() is not decreased, causing a refcnt leak. Fix this issue by jumping to "out" label when batadv_v_ogm_orig_get() fails to get the orig node. Fixes: 9323158e ("batman-adv: OGMv2 - implement originators logic") Signed-off-by:
Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by:
Xin Tan <tanxin.ctf@gmail.com> Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Xiyu Yang authored
commit 6107c5da upstream. batadv_show_throughput_override() invokes batadv_hardif_get_by_netdev(), which gets a batadv_hard_iface object from net_dev with increased refcnt and its reference is assigned to a local pointer 'hard_iface'. When batadv_store_throughput_override() returns, "hard_iface" becomes invalid, so the refcount should be decreased to keep refcount balanced. The issue happens in one error path of batadv_store_throughput_override(). When batadv_parse_throughput() returns NULL, the refcnt increased by batadv_hardif_get_by_netdev() is not decreased, causing a refcnt leak. Fix this issue by jumping to "out" label when batadv_parse_throughput() returns NULL. Fixes: 0b5ecc68 ("batman-adv: add throughput override attribute to hard_ifaces") Signed-off-by:
-
Xiyu Yang authored
commit f872de81 upstream. batadv_show_throughput_override() invokes batadv_hardif_get_by_netdev(), which gets a batadv_hard_iface object from net_dev with increased refcnt and its reference is assigned to a local pointer 'hard_iface'. When batadv_show_throughput_override() returns, "hard_iface" becomes invalid, so the refcount should be decreased to keep refcount balanced. The issue happens in the normal path of batadv_show_throughput_override(), which forgets to decrease the refcnt increased by batadv_hardif_get_by_netdev() before the function returns, causing a refcnt leak. Fix this issue by calling batadv_hardif_put() before the batadv_show_throughput_override() returns in the normal path. Fixes: 0b5ecc68 ("batman-adv: add throughput override attribute to hard_ifaces") Signed-off-by:
-
George Spelvin authored
commit fd0c42c4 upstream. and change to pseudorandom numbers, as this is a traffic dithering operation that doesn't need crypto-grade. The previous code operated in 4 steps: 1. Generate a random byte 0 <= rand_tq <= 255 2. Multiply it by BATADV_TQ_MAX_VALUE - tq 3. Divide by 255 (= BATADV_TQ_MAX_VALUE) 4. Return BATADV_TQ_MAX_VALUE - rand_tq This would apperar to scale (BATADV_TQ_MAX_VALUE - tq) by a random value between 0/255 and 255/255. But! The intermediate value between steps 3 and 4 is stored in a u8 variable. So it's truncated, and most of the time, is less than 255, after which the division produces 0. Specifically, if tq is odd, the product is always even, and can never be 255. If tq is even, there's exactly one random byte value that will produce a product byte of 255. Thus, the return value is 255 (511/512 of the time) or 254 (1/512 of the time). If we assume that the truncation is a bug, and the code is meant to scale the input, a simpler way of looking at it is that it's returning a random value between tq and BATADV_TQ_MAX_VALUE, inclusive. Well, we have an optimized function for doing just that. Fixes: 3c12de9a ("batman-adv: network coding - code and transmit packets if possible") Signed-off-by:
George Spelvin <lkml@sdf.org> Signed-off-by:
-
David Hildenbrand authored
commit e84fe99b upstream. Without CONFIG_PREEMPT, it can happen that we get soft lockups detected, e.g., while booting up. watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.6.0-next-20200331+ #4 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 RIP: __pageblock_pfn_to_page+0x134/0x1c0 Call Trace: set_zone_contiguous+0x56/0x70 page_alloc_init_late+0x166/0x176 kernel_init_freeable+0xfa/0x255 kernel_init+0xa/0x106 ret_from_fork+0x35/0x40 The issue becomes visible when having a lot of memory (e.g., 4TB) assigned to a single NUMA node - a system that can easily be created using QEMU. Inside VMs on a hypervisor with quite some memory overcommit, this is fairly easy to trigger. Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by:
Pankaj Gupta <pankaj.gupta.linux@gmail.com> Reviewed-by:
Baoquan He <bhe@redhat.com> Reviewed-by:
Shile Zhang <shile.zhang@linux.alibaba.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Shile Zhang <shile.zhang@linux.alibaba.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Baoquan He <bhe@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200416073417.5003-1-david@redhat.comSigned-off-by:
-
Steven Rostedt (VMware) authored
commit 11f5efc3 upstream. x86_64 lazily maps in the vmalloc pages, and the way this works with per_cpu areas can be complex, to say the least. Mappings may happen at boot up, and if nothing synchronizes the page tables, those page mappings may not be synced till they are used. This causes issues for anything that might touch one of those mappings in the path of the page fault handler. When one of those unmapped mappings is touched in the page fault handler, it will cause another page fault, which in turn will cause a page fault, and leave us in a loop of page faults. Commit 763802b5 ("x86/mm: split vmalloc_sync_all()") split vmalloc_sync_all() into vmalloc_sync_unmappings() and vmalloc_sync_mappings(), as on system exit, it did not need to do a full sync on x86_64 (although it still needed to be done on x86_32). By chance, the vmalloc_sync_all() would synchronize the page mappings done at boot up and prevent the per cpu area from being a problem for tracing in the page fault handler. But when that synchronization in the exit of a task became a nop, it caused the problem to appear. Link: https://lore.kernel.org/r/20200429054857.66e8e333@oasis.local.home Cc: stable@vger.kernel.org Fixes: 737223fb ("tracing: Consolidate buffer allocation code") Reported-by:
"Tzvetomir Stoyanov (VMware)" <tz.stoyanov@gmail.com> Suggested-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Oliver Neukum authored
commit e9b3c610 upstream. We must not process packets shorter than a packet ID Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reported-and-tested-by: syzbot+d29e9263e13ce0b9f4fd@syzkaller.appspotmail.com Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Oliver Neukum authored
commit 9f04db23 upstream. This device needs US_FL_NO_REPORT_OPCODES to avoid going through prolonged error handling on enumeration. Signed-off-by:
Julian Groß <julian.g@posteo.de> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200429155218.7308-1-oneukum@suse.comSigned-off-by:
-
Kees Cook authored
commit bbdc6076 upstream. Commmit eab09532 ("binfmt_elf: use ELF_ET_DYN_BASE only for PIE"), made changes in the rare case when the ELF loader was directly invoked (e.g to set a non-inheritable LD_LIBRARY_PATH, testing new versions of the loader), by moving into the mmap region to avoid both ET_EXEC and PIE binaries. This had the effect of also moving the brk region into mmap, which could lead to the stack and brk being arbitrarily close to each other. An unlucky process wouldn't get its requested stack size and stack allocations could end up scribbling on the heap. This is illustrated here. In the case of using the loader directly, brk (so helpfully identified as "[heap]") is allocated with the _loader_ not the binary. For example, with ASLR entirely disabled, you can see this more clearly: $ /bin/cat /proc/self/maps 555555554000-55555555c000 r-xp 00000000 ... /bin/cat 55555575b000-55555575c000 r--p 00007000 ... /bin/cat 55555575c000-55555575d000 rw-p 00008000 ... /bin/cat 55555575d000-55555577e000 rw-p 00000000 ... [heap] ... 7ffff7ff7000-7ffff7ffa000 r--p 00000000 ... [vvar] 7ffff7ffa000-7ffff7ffc000 r-xp 00000000 ... [vdso] 7ffff7ffc000-7ffff7ffd000 r--p 00027000 ... /lib/x86_64-linux-gnu/ld-2.27.so 7ffff7ffd000-7ffff7ffe000 rw-p 00028000 ... /lib/x86_64-linux-gnu/ld-2.27.so 7ffff7ffe000-7ffff7fff000 rw-p 00000000 ... 7ffffffde000-7ffffffff000 rw-p 00000000 ... [stack] $ /lib/x86_64-linux-gnu/ld-2.27.so /bin/cat /proc/self/maps ... 7ffff7bcc000-7ffff7bd4000 r-xp 00000000 ... /bin/cat 7ffff7bd4000-7ffff7dd3000 ---p 00008000 ... /bin/cat 7ffff7dd3000-7ffff7dd4000 r--p 00007000 ... /bin/cat 7ffff7dd4000-7ffff7dd5000 rw-p 00008000 ... /bin/cat 7ffff7dd5000-7ffff7dfc000 r-xp 00000000 ... /lib/x86_64-linux-gnu/ld-2.27.so 7ffff7fb2000-7ffff7fd6000 rw-p 00000000 ... 7ffff7ff7000-7ffff7ffa000 r--p 00000000 ... [vvar] 7ffff7ffa000-7ffff7ffc000 r-xp 00000000 ... [vdso] 7ffff7ffc000-7ffff7ffd000 r--p 00027000 ... /lib/x86_64-linux-gnu/ld-2.27.so 7ffff7ffd000-7ffff7ffe000 rw-p 00028000 ... /lib/x86_64-linux-gnu/ld-2.27.so 7ffff7ffe000-7ffff8020000 rw-p 00000000 ... [heap] 7ffffffde000-7ffffffff000 rw-p 00000000 ... [stack] The solution is to move brk out of mmap and into ELF_ET_DYN_BASE since nothing is there in the direct loader case (and ET_EXEC is still far away at 0x400000). Anything that ran before should still work (i.e. the ultimately-launched binary already had the brk very far from its text, so this should be no different from a COMPAT_BRK standpoint). The only risk I see here is that if someone started to suddenly depend on the entire memory space lower than the mmap region being available when launching binaries via a direct loader execs which seems highly unlikely, I'd hope: this would mean a binary would _not_ work when exec()ed normally. (Note that this is only done under CONFIG_ARCH_HAS_ELF_RANDOMIZATION when randomization is turned on.) Link: http://lkml.kernel.org/r/20190422225727.GA21011@beast Link: https://lkml.kernel.org/r/CAGXu5jJ5sj3emOT2QPxQkNQk0qbU6zEfu9=Omfhx_p0nCKPSjA@mail.gmail.com Fixes: eab09532 ("binfmt_elf: use ELF_ET_DYN_BASE only for PIE") Signed-off-by:
Ali Saidi <alisaidi@amazon.com> Cc: Ali Saidi <alisaidi@amazon.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jann Horn <jannh@google.com> Signed-off-by:
-
Hans de Goede authored
commit fd25ea29 upstream. Revert commit 6276e53f (ACPI / video: Add force_native quirk for HP Pavilion dv6). In the commit message for the quirk this revert removes I wrote: "Note that there are quite a few HP Pavilion dv6 variants, some woth ATI and some with NVIDIA hybrid gfx, both seem to need this quirk to have working backlight control. There are also some versions with only Intel integrated gfx, these may not need this quirk, but it should not hurt there." Unfortunately that seems wrong, I've already received 2 reports of this commit causing regressions on some dv6 variants (at least one of which actually has a nvidia GPU). So it seems that HP has made a mess here by using the same model-name both in marketing and in the DMI data for many different variants. Some of which need acpi_backlight=native for functional backlight control (as the quirk this commit reverts was doing), where as others are broken by it. So lets get back to the old sitation so as to avoid regressing on models which used to work without any kernel cmdline arguments before. Fixes: 6276e53f (ACPI / video: Add force_native quirk for HP Pavilion dv6) Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Michael Chan authored
[ Upstream commit bae361c5 ] Improve the slot reset sequence by disabling the device to prevent bad DMAs if slot reset fails. Return the proper result instead of always PCI_ERS_RESULT_RECOVERED to the caller. Fixes: 6316ea6d ("bnxt_en: Enable AER support.") Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Moshe Shemesh authored
[ Upstream commit cece6f43 ] Processing commands by cmd_work_handler() while already in Internal Error State will result in entry leak, since the handler process force completion without doorbell. Forced completion doesn't release the entry and event completion will never arrive, so entry should be released. Fixes: 73dd3a48 ("net/mlx5: Avoid using pending command interface slots") Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Moshe Shemesh authored
[ Upstream commit f3cb3ceb ] mlx5_cmd_flush() will trigger forced completions to all valid command entries. Triggered by an asynch event such as fast teardown it can happen at any stage of the command, including command initialization. It will trigger forced completion and that can lead to completion on an uninitialized command entry. Setting MLX5_CMD_ENT_STATE_PENDING_COMP only after command entry is initialized will ensure force completion is treated only if command entry is initialized. Fixes: 73dd3a48 ("net/mlx5: Avoid using pending command interface slots") Signed-off-by:
-
Michael Chan authored
[ Upstream commit c72cb303 ] The current logic in bnxt_fix_features() will inadvertently turn on both CTAG and STAG VLAN offload if the user tries to disable both. Fix it by checking that the user is trying to enable CTAG or STAG before enabling both. The logic is supposed to enable or disable both CTAG and STAG together. Fixes: 5a9f6b23 ("bnxt_en: Enable and disable RX CTAG and RX STAG VLAN acceleration together.") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit df4953e4 ] syzbot managed to set up sfq so that q->scaled_quantum was zero, triggering an infinite loop in sfq_dequeue() More generally, we must only accept quantum between 1 and 2^18 - 7, meaning scaled_quantum must be in [1, 0x7FFF] range. Otherwise, we also could have a loop in sfq_dequeue() if scaled_quantum happens to be 0x8000, since slot->allot could indefinitely switch between 0 and 0x8000. Fixes: eeaeb068 ("sch_sfq: allow big packets and be fair") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by: syzbot+0251e883fe39e7a0cb0a@syzkaller.appspotmail.com Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 8738c85c ] If choke_init() could not allocate q->tab, we would crash later in choke_reset(). BUG: KASAN: null-ptr-deref in memset include/linux/string.h:366 [inline] BUG: KASAN: null-ptr-deref in choke_reset+0x208/0x340 net/sched/sch_choke.c:326 Write of size 8 at addr 0000000000000000 by task syz-executor822/7022 CPU: 1 PID: 7022 Comm: syz-executor822 Not tainted 5.7.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 __kasan_report.cold+0x5/0x4d mm/kasan/report.c:515 kasan_report+0x33/0x50 mm/kasan/common.c:625 check_memory_region_inline mm/kasan/generic.c:187 [inline] check_memory_region+0x141/0x190 mm/kasan/generic.c:193 memset+0x20/0x40 mm/kasan/common.c:85 memset include/linux/string.h:366 [inline] choke_reset+0x208/0x340 net/sched/sch_choke.c:326 qdisc_reset+0x6b/0x520 net/sched/sch_generic.c:910 dev_deactivate_queue.constprop.0+0x13c/0x240 net/sched/sch_generic.c:1138 netdev_for_each_tx_queue include/linux/netdevice.h:2197 [inline] dev_deactivate_many+0xe2/0xba0 net/sched/sch_generic.c:1195 dev_deactivate+0xf8/0x1c0 net/sched/sch_generic.c:1233 qdisc_graft+0xd25/0x1120 net/sched/sch_api.c:1051 tc_modify_qdisc+0xbab/0x1a00 net/sched/sch_api.c:1670 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5454 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2469 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6bf/0x7e0 net/socket.c:2362 ___sys_sendmsg+0x100/0x170 net/socket.c:2416 __sys_sendmsg+0xec/0x1b0 net/socket.c:2449 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 Fixes: 77e62da6 ("sch_choke: drop all packets in queue during reset") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Matt Jolly authored
[ Upstream commit 57c7f2bd ] Add support for Dell Wireless 5816e to drivers/net/usb/qmi_wwan.c Signed-off-by:
Matt Jolly <Kangie@footclan.ninja> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Tariq Toukan authored
[ Upstream commit 40e47307 ] When ENOSPC is set the idx is still valid and gets set to the global MLX4_SINK_COUNTER_INDEX. However gcc's static analysis cannot tell that ENOSPC is impossible from mlx4_cmd_imm() and gives this warning: drivers/net/ethernet/mellanox/mlx4/main.c:2552:28: warning: 'idx' may be used uninitialized in this function [-Wmaybe-uninitialized] 2552 | priv->def_counter[port] = idx; Also, when ENOSPC is returned mlx4_allocate_default_counters should not fail. Fixes: 6de5f7f6 ("net/mlx4_core: Allocate default counter per port") Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Scott Dial authored
[ Upstream commit ab046a5d ] MACsec decryption always occurs in a softirq context. Since the FPU may not be usable in the softirq context, the call to decrypt may be scheduled on the cryptd work queue. The cryptd work queue does not provide ordering guarantees. Therefore, preserving order requires masking out ASYNC implementations of gcm(aes). For instance, an Intel CPU with AES-NI makes available the generic-gcm-aesni driver from the aesni_intel module to implement gcm(aes). However, this implementation requires the FPU, so it is not always available to use from a softirq context, and will fallback to the cryptd work queue, which does not preserve frame ordering. With this change, such a system would select gcm_base(ctr(aes-aesni),ghash-generic). While the aes-aesni implementation prefers to use the FPU, it will fallback to the aes-asm implementation if unavailable. By using a synchronous version of gcm(aes), the decryption will complete before returning from crypto_aead_decrypt(). Therefore, the macsec_decrypt_done() callback will be called before returning from macsec_decrypt(). Thus, the order of calls to macsec_post_decrypt() for the frames is preserved. While it's presumable that the pure AES-NI version of gcm(aes) is more performant, the hybrid solution is capable of gigabit speeds on modest hardware. Regardless, preserving the order of frames is paramount for many network protocols (e.g., triggering TCP retries). Within the MACsec driver itself, the replay protection is tripped by the out-of-order frames, and can cause frames to be dropped. This bug has been present in this code since it was added in v4.6, however it may not have been noticed since not all CPUs have FPU offload available. Additionally, the bug manifests as occasional out-of-order packets that are easily misattributed to other network phenomena. When this code was added in v4.6, the crypto/gcm.c code did not restrict selection of the ghash function based on the ASYNC flag. For instance, x86 CPUs with PCLMULQDQ would select the ghash-clmulni driver instead of ghash-generic, which submits to the cryptd work queue if the FPU is busy. However, this bug was was corrected in v4.8 by commit b30bdfa8, and was backported all the way back to the v3.14 stable branch, so this patch should be applicable back to the v4.6 stable branch. Signed-off-by:
Scott Dial <scott@scottdial.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 14695212 ] My intent was to not let users set a zero drop_batch_size, it seems I once again messed with min()/max(). Fixes: 9d18562a ("fq_codel: add batch ability to fq_codel_drop()") Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
-
Julia Lawall authored
[ Upstream commit 86530837 ] In this code, it appears that phyter_clocks is a list head, based on the previous list_for_each, and that clock->list is intended to be a list element, given that it has just been initialized in dp83640_clock_init. Accordingly, switch the arguments to list_add_tail, which takes the list head as the second argument. Fixes: cb646e2b ("ptp: Added a clock driver for the National Semiconductor PHYTER.") Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by:
-
Matt Jolly authored
commit 78d6de3c upstream. Add support for Dell Wireless 5816e to drivers/usb/serial/qcserial.c Signed-off-by:
-
- 10 May, 2020 13 commits
-
-
Greg Kroah-Hartman authored
-
Thomas Pedersen authored
commit 30b2f0be upstream. commit 08a5bdde ("mac80211: consider QoS Null frames for STA_NULLFUNC_ACKED") Fixed a bug where we failed to take into account a nullfunc frame can be either non-QoS or QoS. It turns out there is at least one more bug in ieee80211_sta_tx_notify(), introduced in commit 7b6ddeaf ("mac80211: use QoS NDP for AP probing"), where we forgot to check for the QoS variant and so assumed the QoS nullfunc frame never went out Fix this by adding a helper ieee80211_is_any_nullfunc() which consolidates the check for non-QoS and QoS nullfunc frames. Replace existing compound conditionals and add a couple more missing checks for QoS variant. Signed-off-by:
Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200114055940.18502-3-thomas@adapt-ip.comSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Takashi Iwai authored
commit 977dfef4 upstream. The commit 3c6fd1f0 ("ALSA: hda: Add driver blacklist") added a new blacklist for the devices that are known to have empty codecs, and one of the entries was ASUS ROG Zenith II (PCI SSID 1043:874f). However, it turned out that the very same PCI SSID is used for the previous model that does have the valid HD-audio codecs and the change broke the sound on it. Since the empty codec problem appear on the certain AMD platform (PCI ID 1022:1487), this patch changes the blacklist matching to both PCI ID and SSID using pci_match_id(). Also, the entry that was removed by the previous fix for ASUS ROG Zenigh II is re-added. Link: https://lore.kernel.org/r/20200424061222.19792-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jere Leppänen authored
commit 12dfd78e upstream. When starting shutdown in sctp_sf_do_dupcook_a(), get the value for SHUTDOWN Cumulative TSN Ack from the new association, which is reconstructed from the cookie, instead of the old association, which the peer doesn't have anymore. Otherwise the SHUTDOWN is either ignored or replied to with an ABORT by the peer because CTSN Ack doesn't match the peer's Initial TSN. Fixes: bdf6fa52 ("sctp: handle association restarts when the socket is closed.") Signed-off-by:
Jere Leppänen <jere.leppanen@nokia.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Marcin Nowakowski authored
commit f7a31b5e upstream. All performance counters on I6400 (odd and even) are capable of counting any of the available events, so drop current logic of using the extra bit to determine which counter to use. Signed-off-by:
Marcin Nowakowski <marcin.nowakowski@imgtec.com> Fixes: 4e88a862 ("MIPS: Add cases for CPU_I6400") Fixes: fd716fca ("MIPS: perf: Fix I6400 event numbers") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15991/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Chuck Lever authored
commit d698c4a0 upstream. The backchannel code uses rpcrdma_recv_buffer_put to add new reps to the free rep list. This also decrements rb_recv_count, which spoofs the receive overrun logic in rpcrdma_buffer_get_rep. Commit 9b06688b ("xprtrdma: Fix additional uses of spin_lock_irqsave(rb_lock)") replaced the original open-coded list_add with a call to rpcrdma_recv_buffer_put(), but then a year later, commit 05c97466 ("xprtrdma: Fix receive buffer accounting") added rep accounting to rpcrdma_recv_buffer_put. It was an oversight to let the backchannel continue to use this function. The fix this, let's combine the "add to free list" logic with rpcrdma_create_rep. Also, do not allocate RPCRDMA_MAX_BC_REQUESTS rpcrdma_reps in rpcrdma_buffer_create and then allocate additional rpcrdma_reps in rpcrdma_bc_setup_reps. Allocating the extra reps during backchannel set-up is sufficient. Fixes: 05c97466 ("xprtrdma: Fix receive buffer accounting") Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Doug Berger authored
[ Upstream commit 3554e54a ] The driver is designed to drop Rx packets and reclaim the buffers when an allocation fails, and the network interface needs to safely handle this packet loss. Therefore, an allocation failure of Rx SKBs is relatively benign. However, the output of the warning message occurs with a high scheduling priority that can cause excessive jitter/latency for other high priority processing. This commit suppresses the warning messages to prevent scheduling problems while retaining the failure count in the statistics of the network interface. Signed-off-by:
Doug Berger <opendmb@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Doug Berger authored
[ Upstream commit ecaeceb8 ] The driver is designed to drop Rx packets and reclaim the buffers when an allocation fails, and the network interface needs to safely handle this packet loss. Therefore, an allocation failure of Rx SKBs is relatively benign. However, the output of the warning message occurs with a high scheduling priority that can cause excessive jitter/latency for other high priority processing. This commit suppresses the warning messages to prevent scheduling problems while retaining the failure count in the statistics of the network interface. Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 5990cdee ] 0day reports over and over on an powerpc randconfig with clang: lib/mpi/generic_mpih-mul1.c:37:13: error: invalid use of a cast in a inline asm context requiring an l-value: remove the cast or build with -fheinous-gnu-extensions Remove the superfluous casts, which have been done previously for x86 and arm32 in commit dea632ca ("lib/mpi: fix build with clang") and commit 7b7c1df2 ("lib/mpi/longlong.h: fix building with 32-bit x86"). Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://github.com/ClangBuiltLinux/linux/issues/991 Link: https://lore.kernel.org/r/20200413195041.24064-1-natechancellor@gmail.comSigned-off-by:
-
Florian Fainelli authored
[ Upstream commit 6344dbde ] When asking the ARL to read a MAC address, we will get a number of bins returned in a single read. Out of those bins, there can essentially be 3 states: - all bins are full, we have no space left, and we can either replace an existing address or return that full condition - the MAC address was found, then we need to return its bin index and modify that one, and only that one - the MAC address was not found and we have a least one bin free, we use that bin index location then The code would unfortunately fail on all counts. Fixes: 1da6df85 ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by:
-
Jeremie Francois (on alpha) authored
[ Upstream commit e461bc9f ] Sed broke on some strings as it used colon as a separator. I made it more robust by using \001, which is legit POSIX AFAIK. E.g. ./config --set-str CONFIG_USBNET_DEVADDR "de:ad:be:ef:00:01" failed with: sed: -e expression #1, char 55: unknown option to `s' Signed-off-by:
Jeremie Francois (on alpha) <jeremie.francois@gmail.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
Ronnie Sahlberg authored
[ Upstream commit fada37f6 ] We use a spinlock while we are reading and accessing the destination address for a server. We need to also use this spinlock to protect when we are modifying this address from reconn_set_ipaddr(). Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Julien Beraud authored
[ Upstream commit 91a2559c ] In fine adjustement mode, which is the current default, the sub-second increment register is the number of nanoseconds that will be added to the clock when the accumulator overflows. At each clock cycle, the value of the addend register is added to the accumulator. Currently, we use 20ns = 1e09ns / 50MHz as this value whatever the frequency of the ptp clock actually is. The adjustment is then done on the addend register, only incrementing every X clock cycles X being the ratio between 50MHz and ptp_clock_rate (addend = 2^32 * 50MHz/ptp_clock_rate). This causes the following issues : - In case the frequency of the ptp clock is inferior or equal to 50MHz, the addend value calculation will overflow and the default addend value will be set to 0, causing the clock to not work at all. (For instance, for ptp_clock_rate = 50MHz, addend = 2^32). - The resolution of the timestamping clock is limited to 20ns while it is not needed, thus limiting the accuracy of the timestamping to 20ns. Fix this by setting sub-second increment to 2e09ns / ptp_clock_rate. It will allow to reach the minimum possible frequency for ptp_clk_ref, which is 5MHz for GMII 1000Mps Full-Duplex by setting the sub-second-increment to a higher value. For instance, for 25MHz, it gives ssinc = 80ns and default_addend = 2^31. It will also allow to use a lower value for sub-second-increment, thus improving the timestamping accuracy with frequencies higher than 100MHz, for instance, for 200MHz, ssinc = 10ns and default_addend = 2^31. v1->v2: - Remove modifications to the calculation of default addend, which broke compatibility with clock frequencies for which 2000000000 / ptp_clk_freq is not an integer. - Modify description according to discussions. Signed-off-by:
Julien Beraud <julien.beraud@orolia.com> Signed-off-by:
-
