- 01 Oct, 2020 40 commits
-
-
Linus Lüssing authored
[ Upstream commit 74c09b72 ] Scenario: * Multicast frame send from mesh to a BLA backbone (multiple nodes with their bat0 bridged together, with BLA enabled) Issue: * BLA backbone nodes receive the frame multiple times on bat0, once from mesh->bat0 and once from each backbone_gw from LAN For unicast, a node will send only to the best backbone gateway according to the TQ. However for multicast we currently cannot determine if multiple destination nodes share the same backbone if they don't share the same backbone with us. So we need to keep sending the unicasts to all backbone gateways and let the backbone gateways decide which one will forward the frame. We can use the CLAIM mechanism to make this decision. One catch: The batman-adv gateway feature for DHCP packets potentially sends multicast packets in the same batman-adv unicast header as the multicast optimizations code. And we are not allowed to drop those even if we did not claim the source address of the sender, as for such packets there is only this one multicast-in-unicast packet. How can we distinguish the two cases? The gateway feature uses a batman-adv unicast 4 address header. While the multicast-to-unicasts feature uses a simple, 3 address batman-adv unicast header. So let's use this to distinguish. Fixes: fe2da6ff ("batman-adv: check incoming packet type for bla") Signed-off-by:
Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Sven Eckelmann authored
[ Upstream commit 4bba9dab ] The fix for receiving (internally generated) bla packets outside the interrupt context introduced the usage of in_interrupt(). But this functionality is only defined in linux/preempt.h which was not included with the same patch. Fixes: 279e89b2 ("batman-adv: bla: use netif_rx_ni when not in interrupt context") Signed-off-by:
-
Martin Cerveny authored
[ Upstream commit cab4c03b ] "Allwinner V3s" has secondary video layer (VI). Decoded video is displayed in wrong colors until secondary CSC registers are programmed correctly. Fixes: 88302939 ("drm/sun4i: Add DE2 CSC library") Signed-off-by:
Martin Cerveny <m.cerveny@computer.org> Reviewed-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200906162140.5584-2-m.cerveny@computer.orgSigned-off-by:
-
Dmitry Bogdanov authored
[ Upstream commit ce1cf9e5 ] Fix the assert during VF driver installation when the personality is iWARP Fixes: 1fe614d1 ("qed: Relax VF firmware requirements") Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit ec653df2 ] card->owner is a required property and since commit 81033c6b ("ALSA: core: Warn on empty module") a warning is issued if it is empty. Fix lack of it. This fixes following warning observed on RaspberryPi 3B board with ARM 32bit kernel and multi_v7_defconfig: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 210 at sound/core/init.c:207 snd_card_new+0x378/0x398 [snd] Modules linked in: vc4(+) snd_soc_core ac97_bus snd_pcm_dmaengine bluetooth snd_pcm snd_timer crc32_arm_ce raspberrypi_hwmon snd soundcore ecdh_generic ecc bcm2835_thermal phy_generic CPU: 1 PID: 210 Comm: systemd-udevd Not tainted 5.8.0-rc1-00027-g81033c6b #1087 Hardware name: BCM2835 [<c03113c0>] (unwind_backtrace) from [<c030bcb4>] (show_stack+0x10/0x14) [<c030bcb4>] (show_stack) from [<c071cef8>] (dump_stack+0xd4/0xe8) [<c071cef8>] (dump_stack) from [<c0345bfc>] (__warn+0xdc/0xf4) [<c0345bfc>] (__warn) from [<c0345cc4>] (warn_slowpath_fmt+0xb0/0xb8) [<c0345cc4>] (warn_slowpath_fmt) from [<bf02ff74>] (snd_card_new+0x378/0x398 [snd]) [<bf02ff74>] (snd_card_new [snd]) from [<bf11f0b4>] (snd_soc_bind_card+0x280/0x99c [snd_soc_core]) [<bf11f0b4>] (snd_soc_bind_card [snd_soc_core]) from [<bf12f000>] (devm_snd_soc_register_card+0x34/0x6c [snd_soc_core]) [<bf12f000>] (devm_snd_soc_register_card [snd_soc_core]) from [<bf165654>] (vc4_hdmi_bind+0x43c/0x5f4 [vc4]) [<bf165654>] (vc4_hdmi_bind [vc4]) from [<c09d660c>] (component_bind_all+0xec/0x24c) [<c09d660c>] (component_bind_all) from [<bf15c44c>] (vc4_drm_bind+0xd4/0x174 [vc4]) [<bf15c44c>] (vc4_drm_bind [vc4]) from [<c09d6ac0>] (try_to_bring_up_master+0x160/0x1b0) [<c09d6ac0>] (try_to_bring_up_master) from [<c09d6f38>] (component_master_add_with_match+0xd0/0x104) [<c09d6f38>] (component_master_add_with_match) from [<bf15c588>] (vc4_platform_drm_probe+0x9c/0xbc [vc4]) [<bf15c588>] (vc4_platform_drm_probe [vc4]) from [<c09df740>] (platform_drv_probe+0x6c/0xa4) [<c09df740>] (platform_drv_probe) from [<c09dd6f0>] (really_probe+0x210/0x350) [<c09dd6f0>] (really_probe) from [<c09dd940>] (driver_probe_device+0x5c/0xb4) [<c09dd940>] (driver_probe_device) from [<c09ddb38>] (device_driver_attach+0x58/0x60) [<c09ddb38>] (device_driver_attach) from [<c09ddbc0>] (__driver_attach+0x80/0xbc) [<c09ddbc0>] (__driver_attach) from [<c09db820>] (bus_for_each_dev+0x68/0xb4) [<c09db820>] (bus_for_each_dev) from [<c09dc9f8>] (bus_add_driver+0x130/0x1e8) [<c09dc9f8>] (bus_add_driver) from [<c09de648>] (driver_register+0x78/0x110) [<c09de648>] (driver_register) from [<c0302038>] (do_one_initcall+0x50/0x220) [<c0302038>] (do_one_initcall) from [<c03db544>] (do_init_module+0x60/0x210) [<c03db544>] (do_init_module) from [<c03da4f8>] (load_module+0x1e34/0x2338) [<c03da4f8>] (load_module) from [<c03dac00>] (sys_finit_module+0xac/0xbc) [<c03dac00>] (sys_finit_module) from [<c03000c0>] (ret_fast_syscall+0x0/0x54) Exception stack(0xeded9fa8 to 0xeded9ff0) ... ---[ end trace 6414689569c2bc08 ]--- Fixes: bb7d7856 ("drm/vc4: Add HDMI audio support") Suggested-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit e6a18d36 ] Bryce reported that he saw the following with: 0: r6 = r1 1: r1 = 12 2: r0 = *(u16 *)skb[r1] The xlated sequence was incorrectly clobbering r2 with pointer value of r6 ... 0: (bf) r6 = r1 1: (b7) r1 = 12 2: (bf) r1 = r6 3: (bf) r2 = r1 4: (85) call bpf_skb_load_helper_16_no_cache#7692160 ... and hence call to the load helper never succeeded given the offset was too high. Fix it by reordering the load of r6 to r1. Other than that the insn has similar calling convention than BPF helpers, that is, r0 - r5 are scratch regs, so nothing else affected after the insn. Fixes: e0cea7ce ("bpf: implement ld_abs/ld_ind in native bpf") Reported-by:
Bryce Kahle <bryce.kahle@datadoghq.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/cace836e4d07bb63b1a53e49c5dfb238a040c298.1599512096.git.daniel@iogearbox.netSigned-off-by:
-
Eric Dumazet authored
[ Upstream commit 0ff4628f ] syzbot reported a bug in ieee802154_tx() [1] A similar issue in ieee802154_xmit_worker() is also fixed in this patch. [1] BUG: KASAN: use-after-free in ieee802154_tx+0x3d2/0x480 net/mac802154/tx.c:88 Read of size 4 at addr ffff8880251a8c70 by task syz-executor.3/928 CPU: 0 PID: 928 Comm: syz-executor.3 Not tainted 5.9.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 ieee802154_tx+0x3d2/0x480 net/mac802154/tx.c:88 ieee802154_subif_start_xmit+0xbe/0xe4 net/mac802154/tx.c:130 __netdev_start_xmit include/linux/netdevice.h:4634 [inline] netdev_start_xmit include/linux/netdevice.h:4648 [inline] dev_direct_xmit+0x4e9/0x6e0 net/core/dev.c:4203 packet_snd net/packet/af_packet.c:2989 [inline] packet_sendmsg+0x2413/0x5290 net/packet/af_packet.c:3014 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:671 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2353 ___sys_sendmsg+0xf3/0x170 net/socket.c:2407 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2440 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45d5b9 Code: 5d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fc98e749c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000000000002ccc0 RCX: 000000000045d5b9 RDX: 0000000000000000 RSI: 0000000020007780 RDI: 000000000000000b RBP: 000000000118d020 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000118cfec R13: 00007fff690c720f R14: 00007fc98e74a9c0 R15: 000000000118cfec Allocated by task 928: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:461 slab_post_alloc_hook mm/slab.h:518 [inline] slab_alloc_node mm/slab.c:3254 [inline] kmem_cache_alloc_node+0x136/0x3e0 mm/slab.c:3574 __alloc_skb+0x71/0x550 net/core/skbuff.c:198 alloc_skb include/linux/skbuff.h:1094 [inline] alloc_skb_with_frags+0x92/0x570 net/core/skbuff.c:5771 sock_alloc_send_pskb+0x72a/0x880 net/core/sock.c:2348 packet_alloc_skb net/packet/af_packet.c:2837 [inline] packet_snd net/packet/af_packet.c:2932 [inline] packet_sendmsg+0x19fb/0x5290 net/packet/af_packet.c:3014 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:671 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2353 ___sys_sendmsg+0xf3/0x170 net/socket.c:2407 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2440 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 928: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track+0x1c/0x30 mm/kasan/common.c:56 kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0xd8/0x120 mm/kasan/common.c:422 __cache_free mm/slab.c:3418 [inline] kmem_cache_free.part.0+0x74/0x1e0 mm/slab.c:3693 kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:622 __kfree_skb net/core/skbuff.c:679 [inline] consume_skb net/core/skbuff.c:838 [inline] consume_skb+0xcf/0x160 net/core/skbuff.c:832 __dev_kfree_skb_any+0x9c/0xc0 net/core/dev.c:3107 fakelb_hw_xmit+0x20e/0x2a0 drivers/net/ieee802154/fakelb.c:81 drv_xmit_async net/mac802154/driver-ops.h:16 [inline] ieee802154_tx+0x282/0x480 net/mac802154/tx.c:81 ieee802154_subif_start_xmit+0xbe/0xe4 net/mac802154/tx.c:130 __netdev_start_xmit include/linux/netdevice.h:4634 [inline] netdev_start_xmit include/linux/netdevice.h:4648 [inline] dev_direct_xmit+0x4e9/0x6e0 net/core/dev.c:4203 packet_snd net/packet/af_packet.c:2989 [inline] packet_sendmsg+0x2413/0x5290 net/packet/af_packet.c:3014 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:671 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2353 ___sys_sendmsg+0xf3/0x170 net/socket.c:2407 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2440 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff8880251a8c00 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 112 bytes inside of 224-byte region [ffff8880251a8c00, ffff8880251a8ce0) The buggy address belongs to the page: page:0000000062b6a4f1 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x251a8 flags: 0xfffe0000000200(slab) raw: 00fffe0000000200 ffffea0000435c88 ffffea00028b6c08 ffff8880a9055d00 raw: 0000000000000000 ffff8880251a80c0 000000010000000c 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880251a8b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880251a8b80: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc >ffff8880251a8c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880251a8c80: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff8880251a8d00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb Fixes: 409c3b0c ("mac802154: tx: move stats tx increment") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Cc: Alexander Aring <alex.aring@gmail.com> Cc: Stefan Schmidt <stefan@datenfreihafen.org> Cc: linux-wpan@vger.kernel.org Link: https://lore.kernel.org/r/20200908104025.4009085-1-edumazet@google.comSigned-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
-
Linus Lüssing authored
[ Upstream commit 7dda5b33 ] The unicast packet rerouting code makes several assumptions. For instance it assumes that there is always exactly one destination in the TT. This breaks for multicast frames in a unicast packets in several ways: For one thing if there is actually no TT entry and the destination node was selected due to the multicast tvlv flags it announced. Then an intermediate node will wrongly drop the packet. For another thing if there is a TT entry but the TTVN of this entry is newer than the originally addressed destination node: Then the intermediate node will wrongly redirect the packet, leading to duplicated multicast packets at a multicast listener and missing packets at other multicast listeners or multicast routers. Fixing this by not applying the unicast packet rerouting to batman-adv unicast packets with a multicast payload. We are not able to detect a roaming multicast listener at the moment and will just continue to send the multicast frame to both the new and old destination for a while in case of such a roaming multicast listener. Fixes: a73105b8 ("batman-adv: improved client announcement mechanism") Signed-off-by:
-
Jing Xiangfeng authored
[ Upstream commit c2b94787 ] eni_init_one() misses to call pci_disable_device() in an error path. Jump to err_disable to fix it. Fixes: ede58ef2 ("atm: remove deprecated use of pci api") Signed-off-by:
Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Linus Lüssing authored
[ Upstream commit 097930e8 ] It seems that due to a copy & paste error the void pointer in batadv_choose_backbone_gw() is cast to the wrong type. Fixing this by using "struct batadv_bla_backbone_gw" instead of "struct batadv_bla_claim" which better matches the caller's side. For now it seems that we were lucky because the two structs both have their orig/vid and addr/vid in the beginning. However I stumbled over this issue when I was trying to add some debug variables in front of "orig" in batadv_backbone_gw, which caused hash lookups to fail. Fixes: 07568d03 ("batman-adv: don't rely on positions in struct for hashing") Signed-off-by:
Linus Lüssing <ll@simonwunderlich.de> Signed-off-by:
-
Maximilian Luz authored
[ Upstream commit 4afc850e ] Following commit e1869678 ("mwifiex: Prevent memory corruption handling keys") the mwifiex driver fails to authenticate with certain networks, specifically networks with 256 bit keys, and repeatedly asks for the password. The kernel log repeats the following lines (id and bssid redacted): mwifiex_pcie 0000:01:00.0: info: trying to associate to '<id>' bssid <bssid> mwifiex_pcie 0000:01:00.0: info: associated to bssid <bssid> successfully mwifiex_pcie 0000:01:00.0: crypto keys added mwifiex_pcie 0000:01:00.0: info: successfully disconnected from <bssid>: reason code 3 Tracking down this problem lead to the overflow check introduced by the aforementioned commit into mwifiex_ret_802_11_key_material_v2(). This check fails on networks with 256 bit keys due to the current storage size for AES keys in struct mwifiex_aes_param being only 128 bit. To fix this issue, increase the storage size for AES keys to 256 bit. Fixes: e1869678 ("mwifiex: Prevent memory corruption handling keys") Signed-off-by:
Maximilian Luz <luzmaximilian@gmail.com> Reported-by:
Kaloyan Nikolov <konik98@gmail.com> Tested-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Brian Norris <briannorris@chromium.org> Tested-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200825153829.38043-1-luzmaximilian@gmail.comSigned-off-by:
-
Tianjia Zhang authored
[ Upstream commit 400d033f ] In the init function, if the call to of_iomap() fails, the return value is ENXIO instead of -ENXIO. Change to the right negative errno. Fixes: 691f8f87 ("clocksource/drivers/h8300_timer8: Convert init function to return error") Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200802111541.5429-1-tianjia.zhang@linux.alibaba.comSigned-off-by:
-
Tom Rix authored
[ Upstream commit e3914ed6 ] Clang static analysis reports this error adf7242.c:887:6: warning: Assigned value is garbage or undefined len = len_u8; ^ ~~~~~~ len_u8 is set in adf7242_read_reg(lp, 0, &len_u8); When this call fails, len_u8 is not set. So check the return code. Fixes: 7302b9d9 ("ieee802154/adf7242: Driver for ADF7242 MAC IEEE802154") Signed-off-by:
Tom Rix <trix@redhat.com> Acked-by:
Michael Hennerich <michael.hennerich@analog.com> Link: https://lore.kernel.org/r/20200802142339.21091-1-trix@redhat.comSigned-off-by:
-
Liu Jian authored
[ Upstream commit 88f46b3f ] We should call destroy_workqueue to destroy mlme_workqueue in error branch. Fixes: ded845a7 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver") Signed-off-by:
Liu Jian <liujian56@huawei.com> Link: https://lore.kernel.org/r/20200720143315.40523-1-liujian56@huawei.comSigned-off-by:
-
Josh Poimboeuf authored
[ Upstream commit db6c6a0d ] When a function is annotated with STACK_FRAME_NON_STANDARD, objtool doesn't validate its code paths. It also skips sibling call detection within the function. But sibling call detection is actually needed for the case where the ignored function doesn't have any return instructions. Otherwise objtool naively marks the function as implicit static noreturn, which affects the reachability of its callers, resulting in "unreachable instruction" warnings. Fix it by just enabling sibling call detection for ignored functions. The 'insn->ignore' check in add_jump_destinations() is no longer needed after e6da9567 ("objtool: Don't use ignore flag for fake jumps"). Fixes the following warning: arch/x86/kvm/vmx/vmx.o: warning: objtool: vmx_handle_exit_irqoff()+0x142: unreachable instruction which triggers on an allmodconfig with CONFIG_GCOV_KERNEL unset. Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
-
Hans de Goede authored
[ Upstream commit 21653a41 ] Some ACPI i2c-devices _STA method (which is used to detect if the device is present) use autodetection code which probes which device is present over i2c. This requires the I2C ACPI OpRegion handler to be registered before we enumerate i2c-clients under the i2c-adapter. This fixes the i2c touchpad on the Lenovo ThinkBook 14-IIL and ThinkBook 15 IIL not getting an i2c-client instantiated and thus not working. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1842039Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
Dennis Li authored
[ Upstream commit 087d7641 ] In the resume stage of GPU recovery, start_cpsch will call pm_init which set pm->allocated as false, cause the next pm_release_ib has no chance to release ib memory. Add pm_release_ib in stop_cpsch which will be called in the suspend stage of GPU recovery. Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
Dennis Li <Dennis.Li@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Sven Schnelle authored
[ Upstream commit 73ac74c7 ] Switch order so that locking state is consistent even if the IRQ tracer calls into lockdep again. Acked-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Sven Schnelle <svens@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Ilya Leoshkevich authored
[ Upstream commit fcb2b70c ] Add __init to reserve_memory_end, reserve_oldmem and remove_oldmem. Sometimes these functions are not inlined, and then the build complains about section mismatch. Signed-off-by:
Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
-
Palmer Dabbelt authored
[ Upstream commit 66d18dbd ] Without this we get lockdep failures. They're spurious failures as SMP isn't up when ftrace_init_nop() is called. As far as I can tell the easiest fix is to just take the lock, which also seems like the safest fix. Signed-off-by:
Palmer Dabbelt <palmerdabbelt@google.com> Acked-by:
Guo Ren <guoren@kernel.org> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 6a013710 ] The MPMAN Converter9 2-in-1 almost fully works with out default settings. The only problem is that it has only 1 speaker so any sounds only playing on the right channel get lost. Add a quirk for this model using the default settings + MONO_SPEAKER. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200901080623.4987-1-hdegoede@redhat.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Sylwester Nawrocki authored
[ Upstream commit f5a2cda4 ] When the wm8958_mic_detect, wm8994_mic_detect functions get called from the machine driver, e.g. from the card's late_probe() callback, the CODEC device may be PM runtime suspended and any regmap writes have no effect. Add PM runtime calls to these functions to ensure the device registers are updated as expected. This suppresses an error during boot "wm8994-codec: ASoC: error at snd_soc_component_update_bits on wm8994-codec" caused by the regmap access error due to the cache_only flag being set. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by:
Krzysztof Kozlowski <krzk@kernel.org> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200827173357.31891-2-s.nawrocki@samsung.comSigned-off-by:
-
Sylwester Nawrocki authored
[ Upstream commit 811c5494 ] The WM8994_MICBIAS register is not available in the WM1811 CODEC so skip initialization of that register for that device. This suppresses an error during boot: "wm8994-codec: ASoC: error at snd_soc_component_update_bits on wm8994-codec" Signed-off-by:
-
Anthony Iliopoulos authored
[ Upstream commit 05b29021 ] Commit 3b4b1972 ("nvme: fix possible deadlock when I/O is blocked") reverted multipath head disk revalidation due to deadlocks caused by holding the bd_mutex during revalidate. Updating the multipath disk blockdev size is still required though for userspace to be able to observe any resizing while the device is mounted. Directly update the bdev inode size to avoid unnecessarily holding the bdev->bd_mutex. Fixes: 3b4b1972 ("nvme: fix possible deadlock when I/O is blocked") Signed-off-by:
Anthony Iliopoulos <ailiop@suse.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Tonghao Zhang authored
[ Upstream commit 659d4587 ] Compile the kernel for arm 32 platform, the build warning found. To fix that, should use div_u64() for divisions. | net/openvswitch/meter.c:396: undefined reference to `__udivdi3' [add more commit msg, change reported tag, and use div_u64 instead of do_div by Tonghao] Fixes: e5735887 ("net: openvswitch: use u64 for meter bucket") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Tonghao Zhang <xiangxia.m.yue@gmail.com> Tested-by:
-
Jin Yao authored
[ Upstream commit 8510895b ] A big uncore event group is split into multiple small groups which only include the uncore events from the same PMU. This has been supported in the commit 3cdc5c2c ("perf parse-events: Handle uncore event aliases in small groups properly"). If the event's PMU name starts to repeat, it must be a new event. That can be used to distinguish the leader from other members. But now it only compares the pointer of pmu_name (leader->pmu_name == evsel->pmu_name). If we use "perf stat -M LLC_MISSES.PCIE_WRITE -a" on cascadelakex, the event list is: evsel->name evsel->pmu_name --------------------------------------------------------------- unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_4 (as leader) unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_2 unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_0 unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_5 unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_3 unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_1 unc_iio_data_req_of_cpu.mem_write.part1 uncore_iio_4 ...... For the event "unc_iio_data_req_of_cpu.mem_write.part1" with "uncore_iio_4", it should be the event from PMU "uncore_iio_4". It's not a new leader for this PMU. But if we use "(leader->pmu_name == evsel->pmu_name)", the check would be failed and the event is stored to leaders[] as a new PMU leader. So this patch uses strcmp to compare the PMU name between events. Fixes: d4953f7e ("perf parse-events: Fix 3 use after frees found with clang ASAN") Signed-off-by:
Jin Yao <yao.jin@linux.intel.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200430003618.17002-1-yao.jin@linux.intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Hou Tao authored
[ Upstream commit c16f39d1 ] When CONFIG_MTD_UBI_FASTMAP is enabled, fm_anchor will be assigned a free PEB during ubi_wl_init() or ubi_update_fastmap(). However if fastmap is not used or disabled on the MTD device, ubi_wl_entry related with the PEB will not be freed during detach. So Fix it by freeing the unused fastmap anchor during detach. Fixes: f9c34bb5 ("ubi: Fix producing anchor PEBs") Reported-by: syzbot+f317896aae32eb281a58@syzkaller.appspotmail.com Reviewed-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Hou Tao <houtao1@huawei.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Qu Wenruo authored
[ Upstream commit fa91e4aa ] [BUG] When running tests like generic/013 on test device with btrfs quota enabled, it can normally lead to data leak, detected at unmount time: BTRFS warning (device dm-3): qgroup 0/5 has unreleased space, type 0 rsv 4096 ------------[ cut here ]------------ WARNING: CPU: 11 PID: 16386 at fs/btrfs/disk-io.c:4142 close_ctree+0x1dc/0x323 [btrfs] RIP: 0010:close_ctree+0x1dc/0x323 [btrfs] Call Trace: btrfs_put_super+0x15/0x17 [btrfs] generic_shutdown_super+0x72/0x110 kill_anon_super+0x18/0x30 btrfs_kill_super+0x17/0x30 [btrfs] deactivate_locked_super+0x3b/0xa0 deactivate_super+0x40/0x50 cleanup_mnt+0x135/0x190 __cleanup_mnt+0x12/0x20 task_work_run+0x64/0xb0 __prepare_exit_to_usermode+0x1bc/0x1c0 __syscall_return_slowpath+0x47/0x230 do_syscall_64+0x64/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ---[ end trace caf08beafeca2392 ]--- BTRFS error (device dm-3): qgroup reserved space leaked [CAUSE] In the offending case, the offending operations are: 2/6: writev f2X[269 1 0 0 0 0] [1006997,67,288] 0 2/7: truncate f2X[269 1 0 0 48 1026293] 18388 0 The following sequence of events could happen after the writev(): CPU1 (writeback) | CPU2 (truncate) ----------------------------------------------------------------- btrfs_writepages() | |- extent_write_cache_pages() | |- Got page for 1003520 | | 1003520 is Dirty, no writeback | | So (!clear_page_dirty_for_io()) | | gets called for it | |- Now page 1003520 is Clean. | | | btrfs_setattr() | | |- btrfs_setsize() | | |- truncate_setsize() | | New i_size is 18388 |- __extent_writepage() | | |- page_offset() > i_size | |- btrfs_invalidatepage() | |- Page is clean, so no qgroup | callback executed This means, the qgroup reserved data space is not properly released in btrfs_invalidatepage() as the page is Clean. [FIX] Instead of checking the dirty bit of a page, call btrfs_qgroup_free_data() unconditionally in btrfs_invalidatepage(). As qgroup rsv are completely bound to the QGROUP_RESERVED bit of io_tree, not bound to page status, thus we won't cause double freeing anyway. Fixes: 0b34c261 ("btrfs: qgroup: Prevent qgroup->reserved from going subzero") CC: stable@vger.kernel.org # 4.14+ Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Zeng Tao authored
[ Upstream commit b872d064 ] The vfio_pci_release call will free and clear the error and request eventfd ctx while these ctx could be in use at the same time in the function like vfio_pci_request, and it's expected to protect them under the vdev->igate mutex, which is missing in vfio_pci_release. This issue is introduced since commit 1518ac27 ("vfio/pci: fix memory leaks of eventfd ctx"),and since commit 5c5866c5 ("vfio/pci: Clear error and request eventfd ctx after releasing"), it's very easily to trigger the kernel panic like this: [ 9513.904346] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 [ 9513.913091] Mem abort info: [ 9513.915871] ESR = 0x96000006 [ 9513.918912] EC = 0x25: DABT (current EL), IL = 32 bits [ 9513.924198] SET = 0, FnV = 0 [ 9513.927238] EA = 0, S1PTW = 0 [ 9513.930364] Data abort info: [ 9513.933231] ISV = 0, ISS = 0x00000006 [ 9513.937048] CM = 0, WnR = 0 [ 9513.940003] user pgtable: 4k pages, 48-bit VAs, pgdp=0000007ec7d12000 [ 9513.946414] [0000000000000008] pgd=0000007ec7d13003, p4d=0000007ec7d13003, pud=0000007ec728c003, pmd=0000000000000000 [ 9513.956975] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 9513.962521] Modules linked in: vfio_pci vfio_virqfd vfio_iommu_type1 vfio hclge hns3 hnae3 [last unloaded: vfio_pci] [ 9513.972998] CPU: 4 PID: 1327 Comm: bash Tainted: G W 5.8.0-rc4+ #3 [ 9513.980443] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V3.B270.01 05/08/2020 [ 9513.989274] pstate: 80400089 (Nzcv daIf +PAN -UAO BTYPE=--) [ 9513.994827] pc : _raw_spin_lock_irqsave+0x48/0x88 [ 9513.999515] lr : eventfd_signal+0x6c/0x1b0 [ 9514.003591] sp : ffff800038a0b960 [ 9514.006889] x29: ffff800038a0b960 x28: ffff007ef7f4da10 [ 9514.012175] x27: ffff207eefbbfc80 x26: ffffbb7903457000 [ 9514.017462] x25: ffffbb7912191000 x24: ffff007ef7f4d400 [ 9514.022747] x23: ffff20be6e0e4c00 x22: 0000000000000008 [ 9514.028033] x21: 0000000000000000 x20: 0000000000000000 [ 9514.033321] x19: 0000000000000008 x18: 0000000000000000 [ 9514.038606] x17: 0000000000000000 x16: ffffbb7910029328 [ 9514.043893] x15: 0000000000000000 x14: 0000000000000001 [ 9514.049179] x13: 0000000000000000 x12: 0000000000000002 [ 9514.054466] x11: 0000000000000000 x10: 0000000000000a00 [ 9514.059752] x9 : ffff800038a0b840 x8 : ffff007ef7f4de60 [ 9514.065038] x7 : ffff007fffc96690 x6 : fffffe01faffb748 [ 9514.070324] x5 : 0000000000000000 x4 : 0000000000000000 [ 9514.075609] x3 : 0000000000000000 x2 : 0000000000000001 [ 9514.080895] x1 : ffff007ef7f4d400 x0 : 0000000000000000 [ 9514.086181] Call trace: [ 9514.088618] _raw_spin_lock_irqsave+0x48/0x88 [ 9514.092954] eventfd_signal+0x6c/0x1b0 [ 9514.096691] vfio_pci_request+0x84/0xd0 [vfio_pci] [ 9514.101464] vfio_del_group_dev+0x150/0x290 [vfio] [ 9514.106234] vfio_pci_remove+0x30/0x128 [vfio_pci] [ 9514.111007] pci_device_remove+0x48/0x108 [ 9514.115001] device_release_driver_internal+0x100/0x1b8 [ 9514.120200] device_release_driver+0x28/0x38 [ 9514.124452] pci_stop_bus_device+0x68/0xa8 [ 9514.128528] pci_stop_and_remove_bus_device+0x20/0x38 [ 9514.133557] pci_iov_remove_virtfn+0xb4/0x128 [ 9514.137893] sriov_disable+0x3c/0x108 [ 9514.141538] pci_disable_sriov+0x28/0x38 [ 9514.145445] hns3_pci_sriov_configure+0x48/0xb8 [hns3] [ 9514.150558] sriov_numvfs_store+0x110/0x198 [ 9514.154724] dev_attr_store+0x44/0x60 [ 9514.158373] sysfs_kf_write+0x5c/0x78 [ 9514.162018] kernfs_fop_write+0x104/0x210 [ 9514.166010] __vfs_write+0x48/0x90 [ 9514.169395] vfs_write+0xbc/0x1c0 [ 9514.172694] ksys_write+0x74/0x100 [ 9514.176079] __arm64_sys_write+0x24/0x30 [ 9514.179987] el0_svc_common.constprop.4+0x110/0x200 [ 9514.184842] do_el0_svc+0x34/0x98 [ 9514.188144] el0_svc+0x14/0x40 [ 9514.191185] el0_sync_handler+0xb0/0x2d0 [ 9514.195088] el0_sync+0x140/0x180 [ 9514.198389] Code: b9001020 d2800000 52800022 f9800271 (885ffe61) [ 9514.204455] ---[ end trace 648de00c8406465f ]--- [ 9514.212308] note: bash[1327] exited with preempt_count 1 Cc: Qian Cai <cai@lca.pw> Cc: Alex Williamson <alex.williamson@redhat.com> Fixes: 1518ac27 ("vfio/pci: fix memory leaks of eventfd ctx") Signed-off-by:
Zeng Tao <prime.zeng@hisilicon.com> Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Andy Lutomirski authored
[ Upstream commit a61fa279 ] Clear the weird flags before logging to improve strace output -- logging results while, say, TF is set does no one any favors. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/907bfa5a42d4475b8245e18b67a04b13ca51ffdb.1593191971.git.luto@kernel.orgSigned-off-by:
-
Javed Hasan authored
[ Upstream commit 823a6540 ] When an rport event (RPORT_EV_READY) is updated without work being queued, avoid taking an additional reference. This issue was leading to memory leak. Trace from KMEMLEAK tool: unreferenced object 0xffff8888259e8780 (size 512): comm "kworker/2:1", jiffies 4433237386 (age 113021.971s) hex dump (first 32 bytes): 58 0a ec cf 83 88 ff ff 00 00 00 00 00 00 00 00 01 00 00 00 08 00 00 00 13 7d f0 1e 0e 00 00 10 backtrace: [<000000006b25760f>] fc_rport_recv_req+0x3c6/0x18f0 [libfc] [<00000000f208d994>] fc_lport_recv_els_req+0x120/0x8a0 [libfc] [<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc] [<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc] [<00000000ad5be37b>] qedf_ll2_process_skb+0x73d/0xad0 [qedf] [<00000000e0eb6893>] process_one_work+0x382/0x6c0 [<000000002dfd9e21>] worker_thread+0x57/0x5c0 [<00000000b648204f>] kthread+0x1a0/0x1c0 [<0000000072f5ab20>] ret_from_fork+0x35/0x40 [<000000001d5c05d8>] 0xffffffffffffffff Below is the log sequence which leads to memory leak. Here we get the RPORT_EV_READY and RPORT_EV_STOP back to back, which lead to overwrite the event RPORT_EV_READY by event RPORT_EV_STOP. Because of this, kref_count gets incremented by 1. kernel: host0: rport fffce5: Received PLOGI request kernel: host0: rport fffce5: Received PLOGI in INIT state kernel: host0: rport fffce5: Port is Ready kernel: host0: rport fffce5: Received PRLI request while in state Ready kernel: host0: rport fffce5: PRLI rspp type 8 active 1 passive 0 kernel: host0: rport fffce5: Received LOGO request while in state Ready kernel: host0: rport fffce5: Delete port kernel: host0: rport fffce5: Received PLOGI request kernel: host0: rport fffce5: Received PLOGI in state Delete - send busy kernel: host0: rport fffce5: work event 3 kernel: host0: rport fffce5: lld callback ev 3 kernel: host0: rport fffce5: work delete Link: https://lore.kernel.org/r/20200626094959.32151-1-jhasan@marvell.comReviewed-by:
Girish Basrur <gbasrur@marvell.com> Reviewed-by:
Saurav Kashyap <skashyap@marvell.com> Reviewed-by:
Shyam Sundar <ssundar@marvell.com> Signed-off-by:
Javed Hasan <jhasan@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Javed Hasan authored
[ Upstream commit 71f2bf85 ] Handling of extra kref which is done by lookup table in case rdata is already present in list. This issue was leading to memory leak. Trace from KMEMLEAK tool: unreferenced object 0xffff8888259e8780 (size 512): comm "kworker/2:1", pid 182614, jiffies 4433237386 (age 113021.971s) hex dump (first 32 bytes): 58 0a ec cf 83 88 ff ff 00 00 00 00 00 00 00 00 01 00 00 00 08 00 00 00 13 7d f0 1e 0e 00 00 10 backtrace: [<000000006b25760f>] fc_rport_recv_req+0x3c6/0x18f0 [libfc] [<00000000f208d994>] fc_lport_recv_els_req+0x120/0x8a0 [libfc] [<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc] [<00000000ad5be37b>] qedf_ll2_process_skb+0x73d/0xad0 [qedf] [<00000000e0eb6893>] process_one_work+0x382/0x6c0 [<000000002dfd9e21>] worker_thread+0x57/0x5c0 [<00000000b648204f>] kthread+0x1a0/0x1c0 [<0000000072f5ab20>] ret_from_fork+0x35/0x40 [<000000001d5c05d8>] 0xffffffffffffffff Below is the log sequence which leads to memory leak. Here we get the nested "Received PLOGI request" for same port and this request leads to call the fc_rport_create() twice for the same rport. kernel: host1: rport fffce5: Received PLOGI request kernel: host1: rport fffce5: Received PLOGI in INIT state kernel: host1: rport fffce5: Port is Ready kernel: host1: rport fffce5: Received PRLI request while in state Ready kernel: host1: rport fffce5: PRLI rspp type 8 active 1 passive 0 kernel: host1: rport fffce5: Received LOGO request while in state Ready kernel: host1: rport fffce5: Delete port kernel: host1: rport fffce5: Received PLOGI request kernel: host1: rport fffce5: Received PLOGI in state Delete - send busy Link: https://lore.kernel.org/r/20200622101212.3922-2-jhasan@marvell.comReviewed-by:
-
Sagi Grimberg authored
[ Upstream commit 3b4b1972 ] Revert fab7772b ("nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns") When adding a new namespace to the head disk (via nvme_mpath_set_live) we will see partition scan which triggers I/O on the mpath device node. This process will usually be triggered from the scan_work which holds the scan_lock. If I/O blocks (if we got ana change currently have only available paths but none are accessible) this can deadlock on the head disk bd_mutex as both partition scan I/O takes it, and head disk revalidation takes it to check for resize (also triggered from scan_work on a different path). See trace [1]. The mpath disk revalidation was originally added to detect online disk size change, but this is no longer needed since commit cb224c3a ("nvme: Convert to use set_capacity_revalidate_and_notify") which already updates resize info without unnecessarily revalidating the disk (the mpath disk doesn't even implement .revalidate_disk fop). [1]: -- kernel: INFO: task kworker/u65:9:494 blocked for more than 241 seconds. kernel: Tainted: G OE 5.3.5-050305-generic #201910071830 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: kworker/u65:9 D 0 494 2 0x80004000 kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: schedule_preempt_disabled+0xe/0x10 kernel: __mutex_lock.isra.0+0x182/0x4f0 kernel: __mutex_lock_slowpath+0x13/0x20 kernel: mutex_lock+0x2e/0x40 kernel: revalidate_disk+0x63/0xa0 kernel: __nvme_revalidate_disk+0xfe/0x110 [nvme_core] kernel: nvme_revalidate_disk+0xa4/0x160 [nvme_core] kernel: ? evict+0x14c/0x1b0 kernel: revalidate_disk+0x2b/0xa0 kernel: nvme_validate_ns+0x49/0x940 [nvme_core] kernel: ? blk_mq_free_request+0xd2/0x100 kernel: ? __nvme_submit_sync_cmd+0xbe/0x1e0 [nvme_core] kernel: nvme_scan_work+0x24f/0x380 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x249/0x400 kernel: kthread+0x104/0x140 kernel: ? process_one_work+0x380/0x380 kernel: ? kthread_park+0x80/0x80 kernel: ret_from_fork+0x1f/0x40 ... kernel: INFO: task kworker/u65:1:2630 blocked for more than 241 seconds. kernel: Tainted: G OE 5.3.5-050305-generic #201910071830 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: kworker/u65:1 D 0 2630 2 0x80004000 kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: io_schedule+0x16/0x40 kernel: do_read_cache_page+0x438/0x830 kernel: ? __switch_to_asm+0x34/0x70 kernel: ? file_fdatawait_range+0x30/0x30 kernel: read_cache_page+0x12/0x20 kernel: read_dev_sector+0x27/0xc0 kernel: read_lba+0xc1/0x220 kernel: ? kmem_cache_alloc_trace+0x19c/0x230 kernel: efi_partition+0x1e6/0x708 kernel: ? vsnprintf+0x39e/0x4e0 kernel: ? snprintf+0x49/0x60 kernel: check_partition+0x154/0x244 kernel: rescan_partitions+0xae/0x280 kernel: __blkdev_get+0x40f/0x560 kernel: blkdev_get+0x3d/0x140 kernel: __device_add_disk+0x388/0x480 kernel: device_add_disk+0x13/0x20 kernel: nvme_mpath_set_live+0x119/0x140 [nvme_core] kernel: nvme_update_ns_ana_state+0x5c/0x60 [nvme_core] kernel: nvme_set_ns_ana_state+0x1e/0x30 [nvme_core] kernel: nvme_parse_ana_log+0xa1/0x180 [nvme_core] kernel: ? nvme_update_ns_ana_state+0x60/0x60 [nvme_core] kernel: nvme_mpath_add_disk+0x47/0x90 [nvme_core] kernel: nvme_validate_ns+0x396/0x940 [nvme_core] kernel: ? blk_mq_free_request+0xd2/0x100 kernel: nvme_scan_work+0x24f/0x380 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x249/0x400 kernel: kthread+0x104/0x140 kernel: ? process_one_work+0x380/0x380 kernel: ? kthread_park+0x80/0x80 kernel: ret_from_fork+0x1f/0x40 -- Fixes: fab7772b ("nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns") Signed-off-by:
Anton Eidelman <anton@lightbitslabs.com> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Zhang Xiaoxu authored
[ Upstream commit 95a3d8f3 ] When xfstests generic/451, there is an BUG at mm/memcontrol.c: page:ffffea000560f2c0 refcount:2 mapcount:0 mapping:000000008544e0ea index:0xf mapping->aops:cifs_addr_ops dentry name:"tst-aio-dio-cycle-write.451" flags: 0x2fffff80000001(locked) raw: 002fffff80000001 ffffc90002023c50 ffffea0005280088 ffff88815cda0210 raw: 000000000000000f 0000000000000000 00000002ffffffff ffff88817287d000 page dumped because: VM_BUG_ON_PAGE(page->mem_cgroup) page->mem_cgroup:ffff88817287d000 ------------[ cut here ]------------ kernel BUG at mm/memcontrol.c:2659! invalid opcode: 0000 [#1] SMP CPU: 2 PID: 2038 Comm: xfs_io Not tainted 5.8.0-rc1 #44 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_ 073836-buildvm-ppc64le-16.ppc.4 RIP: 0010:commit_charge+0x35/0x50 Code: 0d 48 83 05 54 b2 02 05 01 48 89 77 38 c3 48 c7 c6 78 4a ea ba 48 83 05 38 b2 02 05 01 e8 63 0d9 RSP: 0018:ffffc90002023a50 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff88817287d000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88817ac97ea0 RDI: ffff88817ac97ea0 RBP: ffffea000560f2c0 R08: 0000000000000203 R09: 0000000000000005 R10: 0000000000000030 R11: ffffc900020237a8 R12: 0000000000000000 R13: 0000000000000001 R14: 0000000000000001 R15: ffff88815a1272c0 FS: 00007f5071ab0800(0000) GS:ffff88817ac80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055efcd5ca000 CR3: 000000015d312000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mem_cgroup_charge+0x166/0x4f0 __add_to_page_cache_locked+0x4a9/0x710 add_to_page_cache_locked+0x15/0x20 cifs_readpages+0x217/0x1270 read_pages+0x29a/0x670 page_cache_readahead_unbounded+0x24f/0x390 __do_page_cache_readahead+0x3f/0x60 ondemand_readahead+0x1f1/0x470 page_cache_async_readahead+0x14c/0x170 generic_file_buffered_read+0x5df/0x1100 generic_file_read_iter+0x10c/0x1d0 cifs_strict_readv+0x139/0x170 new_sync_read+0x164/0x250 __vfs_read+0x39/0x60 vfs_read+0xb5/0x1e0 ksys_pread64+0x85/0xf0 __x64_sys_pread64+0x22/0x30 do_syscall_64+0x69/0x150 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f5071fcb1af Code: Bad RIP value. RSP: 002b:00007ffde2cdb8e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000011 RAX: ffffffffffffffda RBX: 00007ffde2cdb990 RCX: 00007f5071fcb1af RDX: 0000000000001000 RSI: 000055efcd5ca000 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000001000 R11: 0000000000000293 R12: 0000000000000001 R13: 000000000009f000 R14: 0000000000000000 R15: 0000000000001000 Modules linked in: ---[ end trace 725fa14a3e1af65c ]--- Since commit 3fea5a49 ("mm: memcontrol: convert page cache to a new mem_cgroup_charge() API") not cancel the page charge, the pages maybe double add to pagecache: thread1 | thread2 cifs_readpages readpages_get_pages add_to_page_cache_locked(head,index=n)=0 | readpages_get_pages | add_to_page_cache_locked(head,index=n+1)=0 add_to_page_cache_locked(head, index=n+1)=-EEXIST then, will next loop with list head page's index=n+1 and the page->mapping not NULL readpages_get_pages add_to_page_cache_locked(head, index=n+1) commit_charge VM_BUG_ON_PAGE So, we should not do the next loop when any page add to page cache failed. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Acked-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
-
Alex Williamson authored
[ Upstream commit 5c5866c5 ] The next use of the device will generate an underflow from the stale reference. Cc: Qian Cai <cai@lca.pw> Fixes: 1518ac27 ("vfio/pci: fix memory leaks of eventfd ctx") Reported-by:
Daniel Wagner <dwagner@suse.de> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Tested-by:
-
Thomas Gleixner authored
[ Upstream commit a7ef9ba9 ] Prevent the compiler from uninlining and creating traceable/probable functions as this is invoked _after_ context tracking switched to CONTEXT_USER and rcu idle. Signed-off-by:
Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by:
-
Boris Brezillon authored
[ Upstream commit eb13fa02 ] Looks like some drivers define MTD names with a colon in it, thus making mtdpart= parsing impossible. Let's fix the parser to gracefully handle that case: the last ':' in a partition definition sequence is considered instead of the first one. Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
Ron Minnich <rminnich@google.com> Tested-by:
-
Madhuparna Bhowmik authored
[ Upstream commit e1c3cdb2 ] Fields of md(mport_dev) are set after cdev_device_add(). However, the file operation callbacks can be called after cdev_device_add() and therefore accesses to fields of md in the callbacks can race with the rest of the mport_cdev_add() function. One such example is INIT_LIST_HEAD(&md->portwrites) in mport_cdev_add(), the list is initialised after cdev_device_add(). This can race with list_add_tail(&pw_filter->md_node,&md->portwrites) in rio_mport_add_pw_filter() which is called by unlocked_ioctl. To avoid such data races use cdev_device_add() after initializing md. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Alexandre Bounine <alex.bou9@gmail.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Mike Marshall <hubcap@omnibond.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Allison Randal <allison@lohutok.net> Cc: Pavel Andrianov <andrianov@ispras.ru> Link: http://lkml.kernel.org/r/20200426112950.1803-1-madhuparnabhowmik10@gmail.comSigned-off-by:
-
Qian Cai authored
[ Upstream commit d6c1f098 ] "prev_offset" is a static variable in swapin_nr_pages() that can be accessed concurrently with only mmap_sem held in read mode as noticed by KCSAN, BUG: KCSAN: data-race in swap_cluster_readahead / swap_cluster_readahead write to 0xffffffff92763830 of 8 bytes by task 14795 on cpu 17: swap_cluster_readahead+0x2a6/0x5e0 swapin_readahead+0x92/0x8dc do_swap_page+0x49b/0xf20 __handle_mm_fault+0xcfb/0xd70 handle_mm_fault+0xfc/0x2f0 do_page_fault+0x263/0x715 page_fault+0x34/0x40 1 lock held by (dnf)/14795: #0: ffff897bd2e98858 (&mm->mmap_sem#2){++++}-{3:3}, at: do_page_fault+0x143/0x715 do_user_addr_fault at arch/x86/mm/fault.c:1405 (inlined by) do_page_fault at arch/x86/mm/fault.c:1535 irq event stamp: 83493 count_memcg_event_mm+0x1a6/0x270 count_memcg_event_mm+0x119/0x270 __do_softirq+0x365/0x589 irq_exit+0xa2/0xc0 read to 0xffffffff92763830 of 8 bytes by task 1 on cpu 22: swap_cluster_readahead+0xfd/0x5e0 swapin_readahead+0x92/0x8dc do_swap_page+0x49b/0xf20 __handle_mm_fault+0xcfb/0xd70 handle_mm_fault+0xfc/0x2f0 do_page_fault+0x263/0x715 page_fault+0x34/0x40 1 lock held by systemd/1: #0: ffff897c38f14858 (&mm->mmap_sem#2){++++}-{3:3}, at: do_page_fault+0x143/0x715 irq event stamp: 43530289 count_memcg_event_mm+0x1a6/0x270 count_memcg_event_mm+0x119/0x270 __do_softirq+0x365/0x589 irq_exit+0xa2/0xc0 Signed-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
-
Jeff Layton authored
[ Upstream commit dc3da046 ] Nothing ensures that session will still be valid by the time we dereference the pointer. Take and put a reference. In principle, we should always be able to get a reference here, but throw a warning if that's ever not the case. Signed-off-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
