- 16 Jan, 2019 11 commits
-
-
Kangjie Lu authored
do_command() may fail. The fix adds the missed return value of do_command(). If it fails, returns its error code. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Ondrej Jirman authored
When cedrus_hw_probe is called, v4l2_dev is not yet initialized. Use dev_err instead. Signed-off-by: Ondrej Jirman <megous@megous.com> Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
Control events can leak kernel memory since they do not fully zero the event. The same code is present in both v4l2-ctrls.c and uvc_ctrl.c, so fix both. It appears that all other event code is properly zeroing the structure, it's these two places. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: syzbot+4f021cf3697781dbd9fb@syzkaller.appspotmail.com Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Dafna Hirschfeld authored
In the fwht_encode_frame, 'encoding = encode_plane' should be replaced with 'encoding |= encode_plane' so existing flags won't be overwrriten. Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Andrzej Pietrasiewicz authored
My @samsung.com address is going to cease existing soon, so change it to an address which can actually be used to contact me. Adding Sylwester Nawrocki, who still has access to a wide spectrum of Exynos-based hardware. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Andrzej Pietrasiewicz authored
My @samsung.com address is going to cease existing soon, so change it to an address which can actually be used to contact me. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Jacopo Mondi authored
The PHTW selection algorithm implemented in rcsi2_phtw_write_mbps() checks for lower bound of the interval used to match the desired bandwidth. Use that in place of the currently used upper bound. Fixes: 10c08812 ("media: rcar: rcar-csi2: Update V3M/E3 PHTW tables") Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Kieran Bingham authored
In the partition sizing the term 'prevents' is inappropriately pluralized. Simplify to 'prevent'. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
Added include/trace/events/pwc.h to the list of files. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Matwey V. Kornilov authored
DMA cocherency slows the transfer down on systems without hardware coherent DMA. Instead we use noncocherent DMA memory and explicit sync at data receive handler. Based on previous commit the following performance benchmarks have been carried out. Average memcpy() data transfer rate (rate) and handler completion time (time) have been measured when running video stream at 640x480 resolution at 10fps. x86_64 based system (Intel Core i5-3470). This platform has hardware coherent DMA support and proposed change doesn't make big difference here. * kmalloc: rate = (2.0 +- 0.4) GBps time = (5.0 +- 3.0) usec * usb_alloc_coherent: rate = (3.4 +- 1.2) GBps time = (3.5 +- 3.0) usec We see that the measurements agree within error ranges in this case. So theoretically predicted performance downgrade cannot be reliably measured here. armv7l based system (TI AM335x BeagleBone Black @ 300MHz). This platform has no hardware coherent DMA support. DMA coherence is implemented via disabled page caching that slows down memcpy() due to memory controller behaviour. * kmalloc: rate = ( 94 +- 4) MBps time = (101 +- 4) usec * usb_alloc_coherent: rate = (28.1 +- 0.1) MBps time = (341 +- 2) usec Note, that quantative difference leads (this commit leads to 3.3 times acceleration) to qualitative behavior change in this case. As it was stated before, the video stream cannot be successfully received at AM335x platforms with MUSB based USB host controller due to performance issues [1]. [1] https://www.spinics.net/lists/linux-usb/msg165735.htmlSigned-off-by: Matwey V. Kornilov <matwey@sai.msu.ru> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Matwey V. Kornilov authored
There were reports that PWC-based webcams don't work at some embedded ARM platforms. [1] Isochronous transfer handler seems to work too long leading to the issues in MUSB USB host subsystem. Also note, that urb->giveback() handlers are still called with disabled interrupts. In order to be able to measure performance of PWC driver, traces are introduced in URB handler section. [1] https://www.spinics.net/lists/linux-usb/msg165735.htmlSigned-off-by: Matwey V. Kornilov <matwey@sai.msu.ru> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
- 07 Jan, 2019 17 commits
-
-
Marek Szyprowski authored
Virtual MFC codec's child devices must not be assigned to platform bus, because they are allocated as raw 'struct device' and don't have the corresponding 'platform' part. This fixes NULL pointer access revealed recently by commit a66d9724 ("devres: Align data[] to ARCH_KMALLOC_MINALIGN"). Fixes: c79667dd ("media: s5p-mfc: replace custom reserved memory handling code with generic one") Reported-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Wei Yongjun authored
The driver allocates the spinlock but not initialize it. Use spin_lock_init() on it to initialize it correctly. This is detected by Coccinelle semantic patch. Fixes: d2b4387f ("media: platform: Add Aspeed Video Engine driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Sakari Ailus authored
The driver documentation is under GPL v2 and the uAPI documentation under GNU FDL 1.1+ (without invariant sections) or GPL v2. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Sakari Ailus authored
The intel-ipu3.h intended-to-be-uAPI header is currently under drivers/staging/media/ipu3/include/, not include/uapi/linux. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
French, Nicholas A authored
A typo in code cleanup commit db9c1007 ("media: lgdt330x: do some cleanups at status logic") broke the FE_HAS_LOCK reporting for 3303 chips by inadvertently modifying the register mask. The broken lock status is critial as it prevents video capture cards from reporting signal strength, scanning for channels, and capturing video. Fix regression by reverting mask change. Cc: stable@vger.kernel.org # Kernel 4.17+ Fixes: db9c1007 ("media: lgdt330x: do some cleanups at status logic") Signed-off-by: Nick French <naf@ou.edu> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Adam Stylinski <kungfujesus06@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
The layout of the compound controls has changed to fix 32/64 bit alignment issues and the use of timestamps instead of buffer indices to refer to buffers. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
Use the new v4l2_m2m_buf_copy_data helper function and use timestamps to refer to reference frames instead of using buffer indices. Also remove the padding fields in the structs, that's a bad idea. Just use the right types to keep everything aligned. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
Use v4l2_timeval_to_ns instead of timeval_to_ns to ensure that both kernelspace and userspace will use the same conversion function. Next add a new vb2_find_timestamp() function to find buffers with a specific timestamp. This function will only look at DEQUEUED and DONE buffers, i.e. buffers that are already processed. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
We want to be able to uniquely identify buffers for stateless codecs. The internal timestamp (a u64) as stored internally in the kernel is a suitable candidate for that, but in struct v4l2_buffer it is represented as a struct timeval. Add a v4l2_timeval_to_ns() function that converts the struct timeval into a u64 in the same way that the kernel does. This makes it possible to use this u64 elsewhere as a unique identifier of the buffer. Since timestamps are also copied from the output buffer to the corresponding capture buffer(s) by M2M devices, the u64 can be used to refer to both output and capture buffers. The plan is that in the future we redesign struct v4l2_buffer and use u64 for the timestamp instead of a struct timeval (which has lots of problems with 32 vs 64 bit and y2038 layout changes), and then there is no more need to use this function. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
V4L2_BUF_FLAG_TIMECODE is not video capture specific, so drop that part. The 'Timecodes' section was a bit messy, so that's cleaned up. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
Use the new v4l2_m2m_buf_copy_data() function in vicodec. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
Use the new v4l2_m2m_buf_copy_data() function in vim2m. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
Memory-to-memory devices should copy various parts of struct v4l2_buffer from the output buffer to the capture buffer. Add a helper function that does that to simplify the driver code. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Mauro Carvalho Chehab authored
Lots of warning due to non-static functions are generated because the headers with define them were not included. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - improve boolinit.cocci and use_after_iter.cocci semantic patches - fix alignment for kallsyms - move 'asm goto' compiler test to Kconfig and clean up jump_label CONFIG option - generate asm-generic wrappers automatically if arch does not implement mandatory UAPI headers - remove redundant generic-y defines - misc cleanups * tag 'kbuild-v4.21-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: rename generated .*conf-cfg to *conf-cfg kbuild: remove unnecessary stubs for archheader and archscripts kbuild: use assignment instead of define ... endef for filechk_* rules arch: remove redundant UAPI generic-y defines kbuild: generate asm-generic wrappers if mandatory headers are missing arch: remove stale comments "UAPI Header export list" riscv: remove redundant kernel-space generic-y kbuild: change filechk to surround the given command with { } kbuild: remove redundant target cleaning on failure kbuild: clean up rule_dtc_dt_yaml kbuild: remove UIMAGE_IN and UIMAGE_OUT jump_label: move 'asm goto' support test to Kconfig kallsyms: lower alignment on ARM scripts: coccinelle: boolinit: drop warnings on named constants scripts: coccinelle: check for redeclaration kconfig: remove unused "file" field of yylval union nds32: remove redundant kernel-space generic-y nios2: remove unneeded HAS_DMA define
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf tooling updates form Ingo Molnar: "A final batch of perf tooling changes: mostly fixes and small improvements" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits) perf session: Add comment for perf_session__register_idle_thread() perf thread-stack: Fix thread stack processing for the idle task perf thread-stack: Allocate an array of thread stacks perf thread-stack: Factor out thread_stack__init() perf thread-stack: Allow for a thread stack array perf thread-stack: Avoid direct reference to the thread's stack perf thread-stack: Tidy thread_stack__bottom() usage perf thread-stack: Simplify some code in thread_stack__process() tools gpio: Allow overriding CFLAGS tools power turbostat: Override CFLAGS assignments and add LDFLAGS to build command tools thermal tmon: Allow overriding CFLAGS assignments tools power x86_energy_perf_policy: Override CFLAGS assignments and add LDFLAGS to build command perf c2c: Increase the HITM ratio limit for displayed cachelines perf c2c: Change the default coalesce setup perf trace beauty ioctl: Beautify USBDEVFS_ commands perf trace beauty: Export function to get the files for a thread perf trace: Wire up ioctl's USBDEBFS_ cmd table generator perf beauty ioctl: Add generator for USBDEVFS_ ioctl commands tools headers uapi: Grab a copy of usbdevice_fs.h perf trace: Store the major number for a file when storing its pathname ...
-
- 06 Jan, 2019 12 commits
-
-
Linus Torvalds authored
The semantics of what "in core" means for the mincore() system call are somewhat unclear, but Linux has always (since 2.3.52, which is when mincore() was initially done) treated it as "page is available in page cache" rather than "page is mapped in the mapping". The problem with that traditional semantic is that it exposes a lot of system cache state that it really probably shouldn't, and that users shouldn't really even care about. So let's try to avoid that information leak by simply changing the semantics to be that mincore() counts actual mapped pages, not pages that might be cheaply mapped if they were faulted (note the "might be" part of the old semantics: being in the cache doesn't actually guarantee that you can access them without IO anyway, since things like network filesystems may have to revalidate the cache before use). In many ways the old semantics were somewhat insane even aside from the information leak issue. From the very beginning (and that beginning is a long time ago: 2.3.52 was released in March 2000, I think), the code had a comment saying Later we can get more picky about what "in core" means precisely. and this is that "later". Admittedly it is much later than is really comfortable. NOTE! This is a real semantic change, and it is for example known to change the output of "fincore", since that program literally does a mmmap without populating it, and then doing "mincore()" on that mapping that doesn't actually have any pages in it. I'm hoping that nobody actually has any workflow that cares, and the info leak is real. We may have to do something different if it turns out that people have valid reasons to want the old semantics, and if we can limit the information leak sanely. Cc: Kevin Easton <kevin@guarana.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Masatake YAMATO <yamato@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Commit 594cc251 ("make 'user_access_begin()' do 'access_ok()'") broke both alpha and SH booting in qemu, as noticed by Guenter Roeck. It turns out that the bug wasn't actually in that commit itself (which would have been surprising: it was mostly a no-op), but in how the addition of access_ok() to the strncpy_from_user() and strnlen_user() functions now triggered the case where those functions would test the access of the very last byte of the user address space. The string functions actually did that user range test before too, but they did it manually by just comparing against user_addr_max(). But with user_access_begin() doing the check (using "access_ok()"), it now exposed problems in the architecture implementations of that function. For example, on alpha, the access_ok() helper macro looked like this: #define __access_ok(addr, size) \ ((get_fs().seg & (addr | size | (addr+size))) == 0) and what it basically tests is of any of the high bits get set (the USER_DS masking value is 0xfffffc0000000000). And that's completely wrong for the "addr+size" check. Because it's off-by-one for the case where we check to the very end of the user address space, which is exactly what the strn*_user() functions do. Why? Because "addr+size" will be exactly the size of the address space, so trying to access the last byte of the user address space will fail the __access_ok() check, even though it shouldn't. As a result, the user string accessor functions failed consistently - because they literally don't know how long the string is going to be, and the max access is going to be that last byte of the user address space. Side note: that alpha macro is buggy for another reason too - it re-uses the arguments twice. And SH has another version of almost the exact same bug: #define __addr_ok(addr) \ ((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg) so far so good: yes, a user address must be below the limit. But then: #define __access_ok(addr, size) \ (__addr_ok((addr) + (size))) is wrong with the exact same off-by-one case: the case when "addr+size" is exactly _equal_ to the limit is actually perfectly fine (think "one byte access at the last address of the user address space") The SH version is actually seriously buggy in another way: it doesn't actually check for overflow, even though it did copy the _comment_ that talks about overflow. So it turns out that both SH and alpha actually have completely buggy implementations of access_ok(), but they happened to work in practice (although the SH overflow one is a serious serious security bug, not that anybody likely cares about SH security). This fixes the problems by using a similar macro on both alpha and SH. It isn't trying to be clever, the end address is based on this logic: unsigned long __ao_end = __ao_a + __ao_b - !!__ao_b; which basically says "add start and length, and then subtract one unless the length was zero". We can't subtract one for a zero length, or we'd just hit an underflow instead. For a lot of access_ok() users the length is a constant, so this isn't actually as expensive as it initially looks. Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscryptLinus Torvalds authored
Pull fscrypt updates from Ted Ts'o: "Add Adiantum support for fscrypt" * tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt: fscrypt: add Adiantum support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 bug fixes from Ted Ts'o: "Fix a number of ext4 bugs" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix special inode number checks in __ext4_iget() ext4: track writeback errors using the generic tracking infrastructure ext4: use ext4_write_inode() when fsyncing w/o a journal ext4: avoid kernel warning when writing the superblock to a dead device ext4: fix a potential fiemap/page fault deadlock w/ inline_data ext4: make sure enough credits are reserved for dioread_nolock writes
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fixes from Christoph Hellwig: "Fix various regressions introduced in this cycles: - fix dma-debug tracking for the map_page / map_single consolidatation - properly stub out DMA mapping symbols for !HAS_DMA builds to avoid link failures - fix AMD Gart direct mappings - setup the dma address for no kernel mappings using the remap allocator" * tag 'dma-mapping-4.21-1' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: fix DMA_ATTR_NO_KERNEL_MAPPING for remapped allocations x86/amd_gart: fix unmapping of non-GART mappings dma-mapping: remove a few unused exports dma-mapping: properly stub out the DMA API for !CONFIG_HAS_DMA dma-mapping: remove dmam_{declare,release}_coherent_memory dma-mapping: implement dmam_alloc_coherent using dmam_alloc_attrs dma-mapping: implement dma_map_single_attrs using dma_map_page_attrs
-
Linus Torvalds authored
Merge tag 'tag-chrome-platform-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform Pull chrome platform updates from Benson Leung: - Changes for EC_MKBP_EVENT_SENSOR_FIFO handling. - Also, maintainership changes. Olofj out, Enric balletbo in. * tag 'tag-chrome-platform-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: MAINTAINERS: add maintainers for ChromeOS EC sub-drivers MAINTAINERS: platform/chrome: Add Enric as a maintainer MAINTAINERS: platform/chrome: remove myself as maintainer platform/chrome: don't report EC_MKBP_EVENT_SENSOR_FIFO as wakeup platform/chrome: straighten out cros_ec_get_{next,host}_event() error codes
-
git://github.com/andersson/remoteprocLinus Torvalds authored
Pull hwspinlock updates from Bjorn Andersson: "This adds support for the hardware semaphores found in STM32MP1" * tag 'hwlock-v4.21' of git://github.com/andersson/remoteproc: hwspinlock: fix return value check in stm32_hwspinlock_probe() hwspinlock: add STM32 hwspinlock device dt-bindings: hwlock: Document STM32 hwspinlock bindings
-
Eric Biggers authored
Add support for the Adiantum encryption mode to fscrypt. Adiantum is a tweakable, length-preserving encryption mode with security provably reducible to that of XChaCha12 and AES-256, subject to a security bound. It's also a true wide-block mode, unlike XTS. See the paper "Adiantum: length-preserving encryption for entry-level processors" (https://eprint.iacr.org/2018/720.pdf) for more details. Also see commit 059c2a4d ("crypto: adiantum - add Adiantum support"). On sufficiently long messages, Adiantum's bottlenecks are XChaCha12 and the NH hash function. These algorithms are fast even on processors without dedicated crypto instructions. Adiantum makes it feasible to enable storage encryption on low-end mobile devices that lack AES instructions; currently such devices are unencrypted. On ARM Cortex-A7, on 4096-byte messages Adiantum encryption is about 4 times faster than AES-256-XTS encryption; decryption is about 5 times faster. In fscrypt, Adiantum is suitable for encrypting both file contents and names. With filenames, it fixes a known weakness: when two filenames in a directory share a common prefix of >= 16 bytes, with CTS-CBC their encrypted filenames share a common prefix too, leaking information. Adiantum does not have this problem. Since Adiantum also accepts long tweaks (IVs), it's also safe to use the master key directly for Adiantum encryption rather than deriving per-file keys, provided that the per-file nonce is included in the IVs and the master key isn't used for any other encryption mode. This configuration saves memory and improves performance. A new fscrypt policy flag is added to allow users to opt-in to this configuration. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-
git://git.lwn.net/linuxLinus Torvalds authored
Pull documentation fixes from Jonathan Corbet: "A handful of late-arriving documentation fixes" * tag 'docs-5.0-fixes' of git://git.lwn.net/linux: doc: filesystems: fix bad references to nonexistent ext4.rst file Documentation/admin-guide: update URL of LKML information link Docs/kernel-api.rst: Remove blk-tag.c reference
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394Linus Torvalds authored
Pull firewire fixlet from Stefan Richter: "Remove an explicit dependency in Kconfig which is implied by another dependency" * tag 'firewire-update' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: Remove depends on HAS_DMA in case of platform dependency
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block updates and fixes from Jens Axboe: - Pulled in MD changes that Shaohua had queued up for 4.21. Unfortunately we lost Shaohua late 2018, I'm sending these in on his behalf. - In conjunction with the above, I added a CREDITS entry for Shaoua. - sunvdc queue restart fix (Ming) * tag 'for-linus-20190104' of git://git.kernel.dk/linux-block: Add CREDITS entry for Shaohua Li block: sunvdc: don't run hw queue synchronously from irq context md: fix raid10 hang issue caused by barrier raid10: refactor common wait code from regular read/write request md: remvoe redundant condition check lib/raid6: add option to skip algo benchmarking lib/raid6: sort algos in rough performance order lib/raid6: check for assembler SSSE3 support lib/raid6: avoid __attribute_const__ redefinition lib/raid6: add missing include for raid6test md: remove set but not used variable 'bi_rdev'
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Happy New Year, just decloaking from leave to get some stuff from the last week in before rc1: core: - two regression fixes for damage blob and atomic i915 gvt: - Some missed GVT fixes from the original pull amdgpu: - new PCI IDs - SR-IOV fixes - DC fixes - Vega20 fixes" * tag 'drm-next-2019-01-05' of git://anongit.freedesktop.org/drm/drm: (53 commits) drm: Put damage blob when destroy plane state drm: fix null pointer dereference on null state pointer drm/amdgpu: Add new VegaM pci id drm/ttm: Use drm_debug_printer for all ttm_bo_mem_space_debug output drm/amdgpu: add Vega20 PSP ASD firmware loading drm/amd/display: Fix MST dp_blank REG_WAIT timeout drm/amd/display: validate extended dongle caps drm/amd/display: Use div_u64 for flip timestamp ns to ms drm/amdgpu/uvd:Change uvd ring name convention drm/amd/powerplay: add Vega20 LCLK DPM level setting support drm/amdgpu: print process info when job timeout drm/amdgpu/nbio7.4: add hw bug workaround for vega20 drm/amdgpu/nbio6.1: add hw bug workaround for vega10/12 drm/amd/display: Optimize passive update planes. drm/amd/display: verify lane status before exiting verify link cap drm/amd/display: Fix bug with not updating VSP infoframe drm/amd/display: Add retry to read ddc_clock pin drm/amd/display: Don't skip link training for empty dongle drm/amd/display: Wait edp HPD to high in detect_sink drm/amd/display: fix surface update sequence ...
-