- 15 Jan, 2022 40 commits
-
-
Baolin Wang authored
Correct the migration stats for hugetlb with using compound_nr() instead of thp_nr_pages(), meanwhile change 'nr_failed_pages' to record the number of normal pages failed to migrate, including THP and hugetlb, and 'nr_succeeded' will record the number of normal pages migrated successfully. [baolin.wang@linux.alibaba.com: fix docs, per Mike] Link: https://lkml.kernel.org/r/141bdfc6-f898-3cc3-f692-726c5f6cb74d@linux.alibaba.com Link: https://lkml.kernel.org/r/71a4b6c22f208728fe8c78ad26375436c4ff9704.1636275127.git.baolin.wang@linux.alibaba.comSigned-off-by:
Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by:
Zi Yan <ziy@nvidia.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Baolin Wang authored
Patch series "Improve the migration stats". According to talk with Zi Yan [1], this patch set changes the return value of migrate_pages() to avoid returning a number which is larger than the number of pages the users tried to migrate by move_pages() syscall. Also fix the hugetlb migration stats and migration stats in trace_mm_compaction_migratepages(). [1] https://lore.kernel.org/linux-mm/7E44019D-2A5D-4BA7-B4D5-00D4712F1687@nvidia.com/ This patch (of 3): As Zi Yan pointed out, the syscall move_pages() can return a non-migrated number larger than the number of pages the users tried to migrate, when a THP page is failed to migrate. This is confusing for users. Since other migration scenarios do not care about the actual non-migrated number of pages except the memory compaction migration which will fix in following patch. Thus we can change the return value to return the number of {normal page, THP, hugetlb} instead to avoid this issue, and the number of THP splits will be considered as the number of non-migrated THP, no matter how many subpages of the THP are migrated successfully. Meanwhile we should still keep the migration counters using the number of normal pages. Link: https://lkml.kernel.org/r/cover.1636275127.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/6486fabc3e8c66ff613e150af25e89b3147977a6.1636275127.git.baolin.wang@linux.alibaba.comSigned-off-by:
-
Sean Christopherson authored
Pass "end - 1" instead of "end" when walking the interval tree in hugetlb_vmdelete_list() to fix an inclusive vs. exclusive bug. The two callers that pass a non-zero "end" treat it as exclusive, whereas the interval tree iterator expects an inclusive "last". E.g. punching a hole in a file that precisely matches the size of a single hugepage, with a vma starting right on the boundary, will result in unmap_hugepage_range() being called twice, with the second call having start==end. The off-by-one error doesn't cause functional problems as __unmap_hugepage_range() turns into a massive nop due to short-circuiting its for-loop on "address < end". But, the mmu_notifier invocations to invalid_range_{start,end}() are passed a bogus zero-sized range, which may be unexpected behavior for secondary MMUs. The bug was exposed by commit ed922739 ("KVM: Use interval tree to do fast hva lookup in memslots"), currently queued in the KVM tree for 5.17, which added a WARN to detect ranges with start==end. Link: https://lkml.kernel.org/r/20211228234257.1926057-1-seanjc@google.com Fixes: 1bfad99a ("hugetlbfs: hugetlb_vmtruncate_list() needs to take a range to delete") Signed-off-by:Sean Christopherson <seanjc@google.com> Reported-by: syzbot+4e697fe80a31aa7efe21@syzkaller.appspotmail.com Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Jann Horn authored
The OOM kill sysrq (alt+sysrq+F) should allow the user to kill the process with the highest OOM badness with a single execution. However, at the moment, the OOM kill can bail out if an OOM notifier (e.g. the i915 one) says that it reclaimed a tiny amount of memory from somewhere. That's probably not what the user wants, so skip the bailout if the OOM was triggered via sysrq. Link: https://lkml.kernel.org/r/20220106102605.635656-1-jannh@google.comSigned-off-by:
Jann Horn <jannh@google.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
Randy Dunlap authored
Fix kernel-doc warnings in mempolicy.c: mempolicy.c:139: warning: No description found for return value of 'numa_map_to_online_node' mempolicy.c:2165: warning: Excess function parameter 'node' description in 'alloc_pages_vma' mempolicy.c:2973: warning: No description found for return value of 'mpol_parse_str' Link: https://lkml.kernel.org/r/20211213233216.5477-1-rdunlap@infradead.orgSigned-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Aneesh Kumar K.V authored
Link: https://lkml.kernel.org/r/20211202123810.267175-4-aneesh.kumar@linux.ibm.comSigned-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Ben Widawsky <ben.widawsky@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: <linux-api@vger.kernel.org> Signed-off-by:
-
Aneesh Kumar K.V authored
This syscall can be used to set a home node for the MPOL_BIND and MPOL_PREFERRED_MANY memory policy. Users should use this syscall after setting up a memory policy for the specified range as shown below. mbind(p, nr_pages * page_size, MPOL_BIND, new_nodes->maskp, new_nodes->size + 1, 0); sys_set_mempolicy_home_node((unsigned long)p, nr_pages * page_size, home_node, 0); The syscall allows specifying a home node/preferred node from which kernel will fulfill memory allocation requests first. For address range with MPOL_BIND memory policy, if nodemask specifies more than one node, page allocations will come from the node in the nodemask with sufficient free memory that is closest to the home node/preferred node. For MPOL_PREFERRED_MANY if the nodemask specifies more than one node, page allocation will come from the node in the nodemask with sufficient free memory that is closest to the home node/preferred node. If there is not enough memory in all the nodes specified in the nodemask, the allocation will be attempted from the closest numa node to the home node in the system. This helps applications to hint at a memory allocation preference node and fallback to _only_ a set of nodes if the memory is not available on the preferred node. Fallback allocation is attempted from the node which is nearest to the preferred node. This helps applications to have control on memory allocation numa nodes and avoids default fallback to slow memory NUMA nodes. For example a system with NUMA nodes 1,2 and 3 with DRAM memory and 10, 11 and 12 of slow memory new_nodes = numa_bitmask_alloc(nr_nodes); numa_bitmask_setbit(new_nodes, 1); numa_bitmask_setbit(new_nodes, 2); numa_bitmask_setbit(new_nodes, 3); p = mmap(NULL, nr_pages * page_size, protflag, mapflag, -1, 0); mbind(p, nr_pages * page_size, MPOL_BIND, new_nodes->maskp, new_nodes->size + 1, 0); sys_set_mempolicy_home_node(p, nr_pages * page_size, 2, 0); This will allocate from nodes closer to node 2 and will make sure the kernel will only allocate from nodes 1, 2, and 3. Memory will not be allocated from slow memory nodes 10, 11, and 12. This differs from default MPOL_BIND behavior in that with default MPOL_BIND the allocation will be attempted from node closer to the local node. One of the reasons to specify a home node is to allow allocations from cpu less NUMA node and its nearby NUMA nodes. With MPOL_PREFERRED_MANY on the other hand will first try to allocate from the closest node to node 2 from the node list 1, 2 and 3. If those nodes don't have enough memory, kernel will allocate from slow memory node 10, 11 and 12 which ever is closer to node 2. Link: https://lkml.kernel.org/r/20211202123810.267175-3-aneesh.kumar@linux.ibm.comSigned-off-by: -
Aneesh Kumar K.V authored
Patch series "mm: add new syscall set_mempolicy_home_node", v6. This patch (of 3): A followup patch will enable setting a home node with MPOL_PREFERRED_MANY memory policy. To facilitate that switch to using policy_node helper. There is no functional change in this patch. Link: https://lkml.kernel.org/r/20211202123810.267175-1-aneesh.kumar@linux.ibm.com Link: https://lkml.kernel.org/r/20211202123810.267175-2-aneesh.kumar@linux.ibm.comSigned-off-by:
-
Chen Wandun authored
In unset_migratetype_isolate(), we can bypass the call to move_freepages_block() for non-buddy pages. It will save a few cpu cycles for some situations such as cma and hugetlb when allocating continue pages, in these situation function alloc_contig_pages will be called. alloc_contig_pages __alloc_contig_migrate_range isolate_freepages_range ==> pages has been remove from buddy undo_isolate_page_range unset_migratetype_isolate ==> can directly set migratetype [osalvador@suse.de: changelog tweak] Link: https://lkml.kernel.org/r/20211229033649.2760586-1-chenwandun@huawei.com Fixes: 3c605096 ("mm/page_alloc: restrict max order of merging on isolated pageblock") Signed-off-by:
Chen Wandun <chenwandun@huawei.com> Reviewed-by:
Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Wang Kefeng <wangkefeng.wang@huawei.com> Signed-off-by:
-
Gang Li authored
drop_slab_node is only used in drop_slab. So remove it's declaration from header file and add keyword static for it's definition. Link: https://lkml.kernel.org/r/20211111062445.5236-1-ligang.bdlg@bytedance.comSigned-off-by:
Gang Li <ligang.bdlg@bytedance.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Muchun Song <songmuchun@bytedance.com> Signed-off-by:
-
Mike Kravetz authored
The message for commit f5c73297 ("userfaultfd/selftests: fix hugetlb area allocations") says there is no need to create a hugetlb file in the non-shared testing case. However, the commit did not actually change the code to prevent creation of the file. While it is technically true that there is no need to create and use a hugetlb file in the case of non-shared-testing, it is useful. This is because 'hole punching' of a hugetlb file has the potentially incorrect side effect of also removing pages from private mappings. The userfaultfd test relies on this side effect for removing pages from the destination buffer during rounds of stress testing. Remove the incomplete code that was added to deal with no hugetlb file. Just keep the code that prevents reserves from being created for the destination area. Link: https://lkml.kernel.org/r/20220104021729.111006-1-mike.kravetz@oracle.comSigned-off-by:
Axel Rasmussen <axelrasmussen@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by:
-
Peter Xu authored
This allow test to continue with interruptions like gdb. Link: https://lkml.kernel.org/r/20211115135219.85881-1-peterx@redhat.comSigned-off-by:
Peter Xu <peterx@redhat.com> Reviewed-by:
-
Waiman Long authored
The hugetlb cgroup reservation test charge_reserved_hugetlb.sh assume that no cgroup filesystems are mounted before running the test. That is not true in many cases. As a result, the test fails to run. Fix that by querying the current cgroup mount setting and using the existing cgroup setup instead before attempting to freshly mount a cgroup filesystem. Similar change is also made for hugetlb_reparenting_test.sh as well, though it still has problem if cgroup v2 isn't used. The patched test scripts were run on a centos 8 based system to verify that they ran properly. Link: https://lkml.kernel.org/r/20220106201359.1646575-1-longman@redhat.com Fixes: 29750f71 ("hugetlb_cgroup: add hugetlb_cgroup reservation tests") Signed-off-by:
Waiman Long <longman@redhat.com> Acked-by:
Mina Almasry <almasrymina@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by:
-
Yang Yang authored
There are interfaces to adjust max_ptes_none, max_ptes_swap, max_ptes_shared values, see /sys/kernel/mm/transparent_hugepage/khugepaged/. But system administrator may not know which value is the best. So Add those events to support adjusting max_ptes_* to suitable values. For example, if default max_ptes_swap value causes too much failures, and system uses zram whose IO is fast, administrator could increase max_ptes_swap until THP_SCAN_EXCEED_SWAP_PTE not increase anymore. Link: https://lkml.kernel.org/r/20211225094036.574157-1-yang.yang29@zte.com.cnSigned-off-by:
Yang Yang <yang.yang29@zte.com.cn> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Saravanan D <saravanand@fb.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by:
-
Yosry Ahmed authored
The hugetlb vma mremap() test currently maps 1GB of memory to trigger pmd sharing and make sure that 'unshare' path in mremap code works. The test originally only mapped 10MB of memory (as specified by the header comment) but was later modified to 1GB to tackle this case. However, not all machines will have 1GB of memory to spare for this test. Adding a mapping size arg will allow run_vmtest.sh to pass an adequate mapping size, while allowing users to run the test independently with arbitrary size mappings. Link: https://lkml.kernel.org/r/20211124203805.3700355-1-yosryahmed@google.comSigned-off-by:
Yosry Ahmed <yosryahmed@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by:
-
Mina Almasry authored
For hugetlb backed jobs/VMs it's critical to understand the numa information for the memory backing these jobs to deliver optimal performance. Currently this technically can be queried from /proc/self/numa_maps, but there are significant issues with that. Namely: 1. Memory can be mapped or unmapped. 2. numa_maps are per process and need to be aggregated across all processes in the cgroup. For shared memory this is more involved as the userspace needs to make sure it doesn't double count shared mappings. 3. I believe querying numa_maps needs to hold the mmap_lock which adds to the contention on this lock. For these reasons I propose simply adding hugetlb.*.numa_stat file, which shows the numa information of the cgroup similarly to memory.numa_stat. On cgroup-v2: cat /sys/fs/cgroup/unified/test/hugetlb.2MB.numa_stat total=2097152 N0=2097152 N1=0 On cgroup-v1: cat /sys/fs/cgroup/hugetlb/test/hugetlb.2MB.numa_stat total=2097152 N0=2097152 N1=0 hierarichal_total=2097152 N0=2097152 N1=0 This patch was tested manually by allocating hugetlb memory and querying the hugetlb.*.numa_stat file of the cgroup and its parents. [colin.i.king@googlemail.com: fix spelling mistake "hierarichal" -> "hierarchical"] Link: https://lkml.kernel.org/r/20211125090635.23508-1-colin.i.king@gmail.com [keescook@chromium.org: fix copy/paste array assignment] Link: https://lkml.kernel.org/r/20211203065647.2819707-1-keescook@chromium.org Link: https://lkml.kernel.org/r/20211123001020.4083653-1-almasrymina@google.comSigned-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Shakeel Butt <shakeelb@google.com> Reviewed-by:
-
Baoquan He authored
In kdump kernel of x86_64, page allocation failure is observed: kworker/u2:2: page allocation failure: order:0, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0 CPU: 0 PID: 55 Comm: kworker/u2:2 Not tainted 5.16.0-rc4+ #5 Hardware name: AMD Dinar/Dinar, BIOS RDN1505B 06/05/2013 Workqueue: events_unbound async_run_entry_fn Call Trace: <TASK> dump_stack_lvl+0x48/0x5e warn_alloc.cold+0x72/0xd6 __alloc_pages_slowpath.constprop.0+0xc69/0xcd0 __alloc_pages+0x1df/0x210 new_slab+0x389/0x4d0 ___slab_alloc+0x58f/0x770 __slab_alloc.constprop.0+0x4a/0x80 kmem_cache_alloc_trace+0x24b/0x2c0 sr_probe+0x1db/0x620 ...... device_add+0x405/0x920 ...... __scsi_add_device+0xe5/0x100 ata_scsi_scan_host+0x97/0x1d0 async_run_entry_fn+0x30/0x130 process_one_work+0x1e8/0x3c0 worker_thread+0x50/0x3b0 ? rescuer_thread+0x350/0x350 kthread+0x16b/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 </TASK> Mem-Info: ...... The above failure happened when calling kmalloc() to allocate buffer with GFP_DMA. It requests to allocate slab page from DMA zone while no managed pages at all in there. sr_probe() --> get_capabilities() --> buffer = kmalloc(512, GFP_KERNEL | GFP_DMA); Because in the current kernel, dma-kmalloc will be created as long as CONFIG_ZONE_DMA is enabled. However, kdump kernel of x86_64 doesn't have managed pages on DMA zone since commit 6f599d84 ("x86/kdump: Always reserve the low 1M when the crashkernel option is specified"). The failure can be always reproduced. For now, let's mute the warning of allocation failure if requesting pages from DMA zone while no managed pages. [akpm@linux-foundation.org: fix warning] Link: https://lkml.kernel.org/r/20211223094435.248523-4-bhe@redhat.com Fixes: 6f599d84 ("x86/kdump: Always reserve the low 1M when the crashkernel option is specified") Signed-off-by:Baoquan He <bhe@redhat.com> Acked-by:
John Donnelly <john.p.donnelly@oracle.com> Reviewed-by:
Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Borislav Petkov <bp@alien8.de> Cc: Christoph Hellwig <hch@lst.de> Cc: David Hildenbrand <david@redhat.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Baoquan He authored
Currently three dma atomic pools are initialized as long as the relevant kernel codes are built in. While in kdump kernel of x86_64, this is not right when trying to create atomic_pool_dma, because there's no managed pages in DMA zone. In the case, DMA zone only has low 1M memory presented and locked down by memblock allocator. So no pages are added into buddy of DMA zone. Please check commit f1d4d47c ("x86/setup: Always reserve the first 1M of RAM"). Then in kdump kernel of x86_64, it always prints below failure message: DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations swapper/0: page allocation failure: order:5, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-0.rc5.20210611git929d931f.42.fc35.x86_64 #1 Hardware name: Dell Inc. PowerEdge R910/0P658H, BIOS 2.12.0 06/04/2018 Call Trace: dump_stack+0x7f/0xa1 warn_alloc.cold+0x72/0xd6 __alloc_pages_slowpath.constprop.0+0xf29/0xf50 __alloc_pages+0x24d/0x2c0 alloc_page_interleave+0x13/0xb0 atomic_pool_expand+0x118/0x210 __dma_atomic_pool_init+0x45/0x93 dma_atomic_pool_init+0xdb/0x176 do_one_initcall+0x67/0x320 kernel_init_freeable+0x290/0x2dc kernel_init+0xa/0x111 ret_from_fork+0x22/0x30 Mem-Info: ...... DMA: failed to allocate 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocation DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations Here, let's check if DMA zone has managed pages, then create atomic_pool_dma if yes. Otherwise just skip it. Link: https://lkml.kernel.org/r/20211223094435.248523-3-bhe@redhat.com Fixes: 6f599d84 ("x86/kdump: Always reserve the low 1M when the crashkernel option is specified") Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
-
Baoquan He authored
Patch series "Handle warning of allocation failure on DMA zone w/o managed pages", v4. **Problem observed: On x86_64, when crash is triggered and entering into kdump kernel, page allocation failure can always be seen. --------------------------------- DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations swapper/0: page allocation failure: order:5, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0 CPU: 0 PID: 1 Comm: swapper/0 Call Trace: dump_stack+0x7f/0xa1 warn_alloc.cold+0x72/0xd6 ...... __alloc_pages+0x24d/0x2c0 ...... dma_atomic_pool_init+0xdb/0x176 do_one_initcall+0x67/0x320 ? rcu_read_lock_sched_held+0x3f/0x80 kernel_init_freeable+0x290/0x2dc ? rest_init+0x24f/0x24f kernel_init+0xa/0x111 ret_from_fork+0x22/0x30 Mem-Info: ------------------------------------ ***Root cause: In the current kernel, it assumes that DMA zone must have managed pages and try to request pages if CONFIG_ZONE_DMA is enabled. While this is not always true. E.g in kdump kernel of x86_64, only low 1M is presented and locked down at very early stage of boot, so that this low 1M won't be added into buddy allocator to become managed pages of DMA zone. This exception will always cause page allocation failure if page is requested from DMA zone. ***Investigation: This failure happens since below commit merged into linus's tree. 1a6a9044 x86/setup: Remove CONFIG_X86_RESERVE_LOW and reservelow= options 23721c8e x86/crash: Remove crash_reserve_low_1M() f1d4d47c x86/setup: Always reserve the first 1M of RAM 7c321eb2 x86/kdump: Remove the backup region handling 6f599d84 x86/kdump: Always reserve the low 1M when the crashkernel option is specified Before them, on x86_64, the low 640K area will be reused by kdump kernel. So in kdump kernel, the content of low 640K area is copied into a backup region for dumping before jumping into kdump. Then except of those firmware reserved region in [0, 640K], the left area will be added into buddy allocator to become available managed pages of DMA zone. However, after above commits applied, in kdump kernel of x86_64, the low 1M is reserved by memblock, but not released to buddy allocator. So any later page allocation requested from DMA zone will fail. At the beginning, if crashkernel is reserved, the low 1M need be locked down because AMD SME encrypts memory making the old backup region mechanims impossible when switching into kdump kernel. Later, it was also observed that there are BIOSes corrupting memory under 1M. To solve this, in commit f1d4d47c, the entire region of low 1M is always reserved after the real mode trampoline is allocated. Besides, recently, Intel engineer mentioned their TDX (Trusted domain extensions) which is under development in kernel also needs to lock down the low 1M. So we can't simply revert above commits to fix the page allocation failure from DMA zone as someone suggested. ***Solution: Currently, only DMA atomic pool and dma-kmalloc will initialize and request page allocation with GFP_DMA during bootup. So only initializ DMA atomic pool when DMA zone has available managed pages, otherwise just skip the initialization. For dma-kmalloc(), for the time being, let's mute the warning of allocation failure if requesting pages from DMA zone while no manged pages. Meanwhile, change code to use dma_alloc_xx/dma_map_xx API to replace kmalloc(GFP_DMA), or do not use GFP_DMA when calling kmalloc() if not necessary. Christoph is posting patches to fix those under drivers/scsi/. Finally, we can remove the need of dma-kmalloc() as people suggested. This patch (of 3): In some places of the current kernel, it assumes that dma zone must have managed pages if CONFIG_ZONE_DMA is enabled. While this is not always true. E.g in kdump kernel of x86_64, only low 1M is presented and locked down at very early stage of boot, so that there's no managed pages at all in DMA zone. This exception will always cause page allocation failure if page is requested from DMA zone. Here add function has_managed_dma() and the relevant helper functions to check if there's DMA zone with managed pages. It will be used in later patches. Link: https://lkml.kernel.org/r/20211223094435.248523-1-bhe@redhat.com Link: https://lkml.kernel.org/r/20211223094435.248523-2-bhe@redhat.com Fixes: 6f599d84 ("x86/kdump: Always reserve the low 1M when the crashkernel option is specified") Signed-off-by:
-
Anshuman Khandual authored
Clarify that the alloc_contig_pages() allocated range will always be aligned to the requested nr_pages. Link: https://lkml.kernel.org/r/1639545478-12160-1-git-send-email-anshuman.khandual@arm.comSigned-off-by:
Anshuman Khandual <anshuman.khandual@arm.com> Cc: David Hildenbrand <david@redhat.com> Signed-off-by:
-
Miles Chen authored
kmalloc(..., GFP_DMA32) does not return DMA32 memory because the DMA32 kmalloc cache array is not implemented. (Reason: there is no such user in kernel). Put a short comment about this so people can understand this by reading the comment. [1] https://lists.linuxfoundation.org/pipermail/iommu/2018-December/031696.html Link: https://lkml.kernel.org/r/20211207093610.6406-1-miles.chen@mediatek.comSigned-off-by:
Miles Chen <miles.chen@mediatek.com> Signed-off-by:
-
Michal Hocko authored
alloc_pages_vma is meant to allocate a page with a vma specific memory policy. The initial node parameter is always a local node so it is pointless to waste a function argument for this. Drop the parameter. Link: https://lkml.kernel.org/r/YaSnlv4QpryEpesG@dhcp22.suse.czSigned-off-by:
-
Xiongwei Song authored
Arthur Marsh reported we would hit the error below when building kernel with gcc-12: CC mm/page_alloc.o mm/page_alloc.c: In function `mem_init_print_info': mm/page_alloc.c:8173:27: error: comparison between two arrays [-Werror=array-compare] 8173 | if (start <= pos && pos < end && size > adj) \ | In C++20, the comparision between arrays should be warned. Link: https://lkml.kernel.org/r/20211125130928.32465-1-sxwjean@me.comSigned-off-by:Xiongwei Song <sxwjean@gmail.com> Reported-by:
Arthur Marsh <arthur.marsh@internode.on.net> Signed-off-by:
-
Changcheng Deng authored
Return statements in functions returning bool should use true/false instead of 1/0. Link: https://lkml.kernel.org/r/20211126073327.74815-1-deng.changcheng@zte.com.cnSigned-off-by:
Changcheng Deng <deng.changcheng@zte.com.cn> Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
-
Suren Baghdasaryan authored
For embedded systems with low total memory, having to run applications with relatively large memory requirements, 10% max limitation for watermark_scale_factor poses an issue of triggering direct reclaim every time such application is started. This results in slow application startup times and bad end-user experience. By increasing watermark_scale_factor max limit we allow vendors more flexibility to choose the right level of kswapd aggressiveness for their device and workload requirements. Link: https://lkml.kernel.org/r/20211124193604.2758863-1-surenb@google.comSigned-off-by:
Suren Baghdasaryan <surenb@google.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Antti Palosaari <crope@iki.fi> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Zhang Yi <yi.zhang@huawei.com> Cc: Fengfei Xi <xi.fengfei@h3c.com> Cc: Mike Rapoport <rppt@kernel.org> Signed-off-by:
-
NeilBrown authored
Various places in the kernel - largely in filesystems - respond to a memory allocation failure by looping around and re-trying. Some of these cannot conveniently use __GFP_NOFAIL, for reasons such as: - a GFP_ATOMIC allocation, which __GFP_NOFAIL doesn't work on - a need to check for the process being signalled between failures - the possibility that other recovery actions could be performed - the allocation is quite deep in support code, and passing down an extra flag to say if __GFP_NOFAIL is wanted would be clumsy. Many of these currently use congestion_wait() which (in almost all cases) simply waits the given timeout - congestion isn't tracked for most devices. It isn't clear what the best delay is for loops, but it is clear that the various filesystems shouldn't be responsible for choosing a timeout. This patch introduces memalloc_retry_wait() with takes on that responsibility. Code that wants to retry a memory allocation can call this function passing the GFP flags that were used. It will wait however is appropriate. For now, it only considers __GFP_NORETRY and whatever gfpflags_allow_blocking() tests. If blocking is allowed without __GFP_NORETRY, then alloc_page either made some reclaim progress, or waited for a while, before failing. So there is no need for much further waiting. memalloc_retry_wait() will wait until the current jiffie ends. If this condition is not met, then alloc_page() won't have waited much if at all. In that case memalloc_retry_wait() waits about 200ms. This is the delay that most current loops uses. linux/sched/mm.h needs to be included in some files now, but linux/backing-dev.h does not. Link: https://lkml.kernel.org/r/163754371968.13692.1277530886009912421@noble.neil.brown.nameSigned-off-by:
NeilBrown <neilb@suse.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Michal Hocko <mhocko@suse.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Chao Yu <chao@kernel.org> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Michal Hocko authored
sl?b and vmalloc allocators reduce the given gfp mask for their internal needs. For that they use GFP_RECLAIM_MASK to preserve the reclaim behavior and constrains. __GFP_NOLOCKDEP is not a part of that mask because it doesn't really control the reclaim behavior strictly speaking. On the other hand it tells the underlying page allocator to disable reclaim recursion detection so arguably it should be part of the mask. Having __GFP_NOLOCKDEP in the mask will not alter the behavior in any form so this change is safe pretty much by definition. It also adds a support for this flag to SL?B and vmalloc allocators which will in turn allow its use to kvmalloc as well. A lack of the support has been noticed recently in http://lkml.kernel.org/r/20211119225435.GZ449541@dread.disaster.area Link: https://lkml.kernel.org/r/YZ9XtLY4AEjVuiEI@dhcp22.suse.czSigned-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by:
Dave Chinner <dchinner@redhat.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Neil Brown <neilb@suse.de> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Signed-off-by:
-
Michal Hocko authored
Support for GFP_NO{FS,IO} and __GFP_NOFAIL has been implemented by previous patches so we can allow the support for kvmalloc. This will allow some external users to simplify or completely remove their helpers. GFP_NOWAIT semantic hasn't been supported so far but it hasn't been explicitly documented so let's add a note about that. ceph_kvmalloc is the first helper to be dropped and changed to kvmalloc. Link: https://lkml.kernel.org/r/20211122153233.9924-5-mhocko@kernel.orgSigned-off-by:Uladzislau Rezki (Sony) <urezki@gmail.com> Acked-by:
-
Michal Hocko authored
Commit b7d90e7a ("mm/vmalloc: be more explicit about supported gfp flags") has been merged prematurely without the rest of the series and without addressed review feedback from Neil. Fix that up now. Only wording is changed slightly. Link: https://lkml.kernel.org/r/20211122153233.9924-4-mhocko@kernel.orgSigned-off-by:
-
Michal Hocko authored
Dave Chinner has mentioned that some of the xfs code would benefit from kvmalloc support for __GFP_NOFAIL because they have allocations that cannot fail and they do not fit into a single page. The large part of the vmalloc implementation already complies with the given gfp flags so there is no work for those to be done. The area and page table allocations are an exception to that. Implement a retry loop for those. Add a short sleep before retrying. 1 jiffy is a completely random timeout. Ideally the retry would wait for an explicit event - e.g. a change to the vmalloc space change if the failure was caused by the space fragmentation or depletion. But there are multiple different reasons to retry and this could become much more complex. Keep the retry simple for now and just sleep to prevent from hogging CPUs. Link: https://lkml.kernel.org/r/20211122153233.9924-3-mhocko@kernel.orgSigned-off-by:
-
Michal Hocko authored
Patch series "extend vmalloc support for constrained allocations", v2. Based on a recent discussion with Dave and Neil [1] I have tried to implement NOFS, NOIO, NOFAIL support for the vmalloc to make life of kvmalloc users easier. A requirement for NOFAIL support for kvmalloc was new to me but this seems to be really needed by the xfs code. NOFS/NOIO was a known and a long term problem which was hoped to be handled by the scope API. Those scope should have been used at the reclaim recursion boundaries both to document them and also to remove the necessity of NOFS/NOIO constrains for all allocations within that scope. Instead workarounds were developed to wrap a single allocation instead (like ceph_kvmalloc). First patch implements NOFS/NOIO support for vmalloc. The second one adds NOFAIL support and the third one bundles all together into kvmalloc and drops ceph_kvmalloc which can use kvmalloc directly now. [1] http://lkml.kernel.org/r/163184741778.29351.16920832234899124642.stgit@noble.brown This patch (of 4): vmalloc historically hasn't supported GFP_NO{FS,IO} requests because page table allocations do not support externally provided gfp mask and performed GFP_KERNEL like allocations. Since few years we have scope (memalloc_no{fs,io}_{save,restore}) APIs to enforce NOFS and NOIO constrains implicitly to all allocators within the scope. There was a hope that those scopes would be defined on a higher level when the reclaim recursion boundary starts/stops (e.g. when a lock required during the memory reclaim is required etc.). It seems that not all NOFS/NOIO users have adopted this approach and instead they have taken a workaround approach to wrap a single [k]vmalloc allocation by a scope API. These workarounds do not serve the purpose of a better reclaim recursion documentation and reduction of explicit GFP_NO{FS,IO} usege so let's just provide them with the semantic they are asking for without a need for workarounds. Add support for GFP_NOFS and GFP_NOIO to vmalloc directly. All internal allocations already comply with the given gfp_mask. The only current exception is vmap_pages_range which maps kernel page tables. Infer the proper scope API based on the given gfp mask. [sfr@canb.auug.org.au: mm/vmalloc.c needs linux/sched/mm.h] Link: https://lkml.kernel.org/r/20211217232641.0148710c@canb.auug.org.au Link: https://lkml.kernel.org/r/20211122153233.9924-1-mhocko@kernel.org Link: https://lkml.kernel.org/r/20211122153233.9924-2-mhocko@kernel.orgSigned-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by:
-
Christian König authored
This reverts commit 2618c60b ("dma: make dma pool to use kmalloc_node"). While working myself into the dmapool code I've found this little odd kmalloc_node(). What basically happens here is that we allocate the housekeeping structure on the numa node where the device is attached to. Since the device is never doing DMA to or from that memory this doesn't seem to make sense at all. So while this doesn't seem to cause much harm it's probably cleaner to revert the change for consistency. Link: https://lkml.kernel.org/r/20211221110724.97664-1-christian.koenig@amd.comSigned-off-by:
Christian König <christian.koenig@amd.com> Cc: Yinghai Lu <yinghai.lu@sun.com> Cc: Andi Kleen <ak@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Cc: David Rientjes <rientjes@google.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Matthew Wilcox (Oracle) authored
All callers pass NULL, so we can stop calculating the value we would store in it. Link: https://lkml.kernel.org/r/20211220205943.456187-3-willy@infradead.orgSigned-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by:
William Kucharski <william.kucharski@oracle.com> Acked-by:
-
Matthew Wilcox (Oracle) authored
Now that we don't report it to the caller of reuse_swap_page(), we don't need to request it from page_trans_huge_map_swapcount(). Link: https://lkml.kernel.org/r/20211220205943.456187-2-willy@infradead.orgSigned-off-by:
-
Matthew Wilcox (Oracle) authored
None of the callers care about the total_map_swapcount() any more. Link: https://lkml.kernel.org/r/20211220205943.456187-1-willy@infradead.orgSigned-off-by:
-
Pasha Tatashin authored
Add page table check hooks into routines that modify user page tables. Link: https://lkml.kernel.org/r/20211221154650.1047963-5-pasha.tatashin@soleen.comSigned-off-by:
Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Greg Thelen <gthelen@google.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kees Cook <keescook@chromium.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Xu <weixugc@google.com> Cc: Will Deacon <will@kernel.org> Signed-off-by:
-
Pasha Tatashin authored
Check user page table entries at the time they are added and removed. Allows to synchronously catch memory corruption issues related to double mapping. When a pte for an anonymous page is added into page table, we verify that this pte does not already point to a file backed page, and vice versa if this is a file backed page that is being added we verify that this page does not have an anonymous mapping We also enforce that read-only sharing for anonymous pages is allowed (i.e. cow after fork). All other sharing must be for file pages. Page table check allows to protect and debug cases where "struct page" metadata became corrupted for some reason. For example, when refcnt or mapcount become invalid. Link: https://lkml.kernel.org/r/20211221154650.1047963-4-pasha.tatashin@soleen.comSigned-off-by:
-
Pasha Tatashin authored
We have ptep_get_and_clear() and ptep_get_and_clear_full() helpers to clear PTE from user page tables, but there is no variant for simple clear of a present PTE from user page tables without using a low level pte_clear() which can be either native or para-virtualised. Add a new ptep_clear() that can be used in common code to clear PTEs from page table. We will need this call later in order to add a hook for page table check. Link: https://lkml.kernel.org/r/20211221154650.1047963-3-pasha.tatashin@soleen.comSigned-off-by:
-
Pasha Tatashin authored
Patch series "page table check", v3. Ensure that some memory corruptions are prevented by checking at the time of insertion of entries into user page tables that there is no illegal sharing. We have recently found a problem [1] that existed in kernel since 4.14. The problem was caused by broken page ref count and led to memory leaking from one process into another. The problem was accidentally detected by studying a dump of one process and noticing that one page contains memory that should not belong to this process. There are some other page->_refcount related problems that were recently fixed: [2], [3] which potentially could also lead to illegal sharing. In addition to hardening refcount [4] itself, this work is an attempt to prevent this class of memory corruption issues. It uses a simple state machine that is independent from regular MM logic to check for illegal sharing at time pages are inserted and removed from page tables. [1] https://lore.kernel.org/all/xr9335nxwc5y.fsf@gthelen2.svl.corp.google.com [2] https://lore.kernel.org/all/1582661774-30925-2-git-send-email-akaher@vmware.com [3] https://lore.kernel.org/all/20210622021423.154662-3-mike.kravetz@oracle.com [4] https://lore.kernel.org/all/20211221150140.988298-1-pasha.tatashin@soleen.com This patch (of 4): There are a few places where we first update the entry in the user page table, and later change the struct page to indicate that this is anonymous or file page. In most places, however, we first configure the page metadata and then insert entries into the page table. Page table check, will use the information from struct page to verify the type of entry is inserted. Change the order in all places to first update struct page, and later to update page table. This means that we first do calls that may change the type of page (anon or file): page_move_anon_rmap page_add_anon_rmap do_page_add_anon_rmap page_add_new_anon_rmap page_add_file_rmap hugepage_add_anon_rmap hugepage_add_new_anon_rmap And after that do calls that add entries to the page table: set_huge_pte_at set_pte_at Link: https://lkml.kernel.org/r/20211221154650.1047963-1-pasha.tatashin@soleen.com Link: https://lkml.kernel.org/r/20211221154650.1047963-2-pasha.tatashin@soleen.comSigned-off-by:
-
Shuah Khan authored
Add a new document to explain Virtually Mapped Kernel Stack Support. This is a compilation of information from the code and original patch series that introduced the Virtually Mapped Kernel Stacks feature. This document summarizes the feature and provides details on allocation, free, and stack overflow handling. Provides reference to available tests. Link: https://lkml.kernel.org/r/20211215002004.47981-1-skhan@linuxfoundation.orgSigned-off-by:
Shuah Khan <skhan@linuxfoundation.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
