- Qualcomm SDM845 camera clock controller

* clk-qcom-sdm845-camcc:
  clk: qcom: Add camera clock controller driver for SDM845
  dt-bindings: clock: Introduce QCOM Camera clock bindings

* clk-mtk-unused:
  clk: mediatek: remove unused array audio_parents

* clk-renesas: (36 commits)
  clk: renesas: r7s9210: Add SPI clocks
  clk: renesas: r7s9210: Move table update to separate function
  clk: renesas: r7s9210: Convert some clocks to early
  clk: renesas: cpg-mssr: Add early clock support
  clk: renesas: r8a77970: Add TPU clock
  clk: renesas: r8a77990: Fix incorrect PLL0 divider in comment
  dt-bindings: clock: renesas: cpg-mssr: Document r8a774c0
  clk: renesas: cpg-mssr: Add r8a774c0 support
  clk: renesas: Add r8a774c0 CPG Core Clock Definitions
  clk: renesas: r8a7743: Add r8a7744 support
  clk: renesas: Add r8a7744 CPG Core Clock Definitions
  dt-bindings: clock: renesas: cpg-mssr: Document r8a7744 binding
  dt-bindings: clock: renesas: Convert to SPDX identifiers
  clk: renesas: cpg-mssr: Add R7S9210 support
  clk: renesas: r8a77970: Add TMU clocks
  clk: renesas: r8a77970: Add CMT clocks
  clk: renesas: r9a06g032: Fix UART34567 clock rate
  clk: renesas: r8a77970: Add SD0H/SD0 clocks for SDHI
  clk: renesas: r8a77980: Add CMT clocks
  clk: renesas: r8a77990: Add missing I2C7 clock
  ...

  - Use updated printk format for OF node names
  - Fix TI code to only search DT subnodes
  - Various static analysis finds

* clk-dt-name:
  clk: Convert to using %pOFn instead of device_node.name

* clk-ti-of-node:
  clk: ti: fix OF child-node lookup

* clk-sa:
  clk: mvebu: armada-37xx-tbg: Switch to clk_get and balance it in probe
  reset: hisilicon: fix potential NULL pointer dereference
  clk: cdce925: release child device nodes
  clk: qcom: clk-branch: Use true and false for boolean values

Merge branches 'clk-spdx', 'clk-qcom-dfs', 'clk-smp2s11-include', 'clk-qcom-8996-missing' and 'clk-qcom-qspi' into clk-next

  - Tag various drivers with SPDX license tags
  - Support dynamic frequency switching (DFS) on qcom SDM845 GCC
  - Only use s2mps11 dt-binding defines instead of redefining them in the driver
  - Add some more missing clks to qcom MSM8996 GCC
  - Quad SPI clks on qcom SDM845

* clk-spdx:
  clk: mvebu: use SPDX-License-Identifier
  clk: renesas: Convert to SPDX identifiers
  clk: renesas: use SPDX identifier for Renesas drivers
  clk: s2mps11,s3c64xx: Add SPDX license identifiers
  clk: max77686: Add SPDX license identifiers

* clk-qcom-dfs:
  clk: qcom: Allocate space for NULL terimation in DFS table
  clk: qcom: gcc: Register QUPv3 RCGs for DFS on SDM845
  clk: qcom: Add support for RCG to register for DFS

* clk-smp2s11-include:
  clk: s2mps11: Use existing defines from bindings for clock IDs

* clk-qcom-8996-missing:
  clk: qcom: Add some missing gcc clks for msm8996

* clk-qcom-qspi:
  clk: qcom: Add qspi (Quad SPI) clocks for sdm845
  clk: qcom: Add qspi (Quad SPI) clock defines for sdm845 to header

The parent clock is get only to have its name, and then the clock is no
more used, so we can safely free it using clk_put. Furthermore as between
the successful devm_clk_get() and the devm_clk_put() call we don't exit
the probe function in error so I can use non managed version of clk_get()
and clk_put().
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Convert the remaining files to SPDX license description.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Merge tag 'clk-renesas-for-v4.20-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull Renesas clk driver updates from Geert Uytterhoeven:

 - Add support for CMT timer clocks on R-Car V3H
 - Add support for SHDI and various timer clocks on R-Car V3M
 - Add support for the new RZ/A2 (R7S9210) SoC, including early clock
   support for the Renesas CPG/MSSR driver
 - Add support for the new RZ/G1N (R8A7744) and RZ/G2E (R8A774C0) SoCs
 - Convert DT binding includes to SPDX license identifiers

* tag 'clk-renesas-for-v4.20-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: r7s9210: Add SPI clocks
  clk: renesas: r7s9210: Move table update to separate function
  clk: renesas: r7s9210: Convert some clocks to early
  clk: renesas: cpg-mssr: Add early clock support
  clk: renesas: r8a77970: Add TPU clock
  clk: renesas: r8a77990: Fix incorrect PLL0 divider in comment
  dt-bindings: clock: renesas: cpg-mssr: Document r8a774c0
  clk: renesas: cpg-mssr: Add r8a774c0 support
  clk: renesas: Add r8a774c0 CPG Core Clock Definitions
  clk: renesas: r8a7743: Add r8a7744 support
  clk: renesas: Add r8a7744 CPG Core Clock Definitions
  dt-bindings: clock: renesas: cpg-mssr: Document r8a7744 binding
  dt-bindings: clock: renesas: Convert to SPDX identifiers
  clk: renesas: cpg-mssr: Add R7S9210 support
  clk: renesas: r8a77970: Add TMU clocks
  clk: renesas: r8a77970: Add CMT clocks
  clk: renesas: r9a06g032: Fix UART34567 clock rate
  clk: renesas: r8a77970: Add SD0H/SD0 clocks for SDHI
  clk: renesas: r8a77980: Add CMT clocks

This patch updates license to use SPDX-License-Identifier
instead of verbose license text.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[rebased against clk-spdx]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Add RSPI clocks for RZ/A2.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Same functionality, just easier to read.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

The OSTM timer driver for RZ/A2 uses TIMER_OF_DECLARE which requires the
ostm module clocks to be registers early in boot.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add support for SoCs that need to register core and module clocks early in
order to use OF drivers that exclusively use macros such as
TIMER_OF_DECLARE.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

The TPU0 clock wasn't present in the original R8A77970 patch by Daisuke
Matsushita, it was added in a later BSP version...

Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

PLL0 runs at 4.8 GHz, i.e. EXTAL x 100.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

This patch documents RZ/G2E (a.k.a. R8A774C0) bindings for the
Clock Pulse Generator driver.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add RZ/G2E (R8A774C0) Clock Pulse Generator / Module Standby and
Software Reset support.

Based on Table 8.2g of "RZ/G Series, 2nd Generation User's Manual:
Hardware (Rev. 0.61, June 12, 2018)".
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add all RZ/G2E (a.k.a. R8A774C0) Clock Pulse Generator Core
Clock Outputs, as listed in Table 8.2g ("List of Clocks
[RZ/G2E]") of the RZ/G2 Hardware User's Manual.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add RZ/G1N (R8A7744) Clock Pulse Generator / Module Standby and Software
Reset support.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add all RZ/G1N Clock Pulse Generator Core Clock Outputs, as listed in
Table 7.2b ("List of Clocks [RZ/G1M/N]") of the RZ/G1 Hardware User's
Manual.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add binding documentation for the RZ/G1N (R8A7744) Clock Pulse
Generator driver.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

This patch updates license to use SPDX-License-Identifier
instead of verbose license text on Renesas related headers.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add support for the R7S9210 (RZ/A2) Clock Pulse Generator and Module
Standby.

The Module Standby HW in the RZ/A series is very close to R-Car HW, except
for how the registers are laid out.
The MSTP registers are only 8-bits wide, there are no status registers
(MSTPSR), and the register offsets are a little different. Since the RZ/A
hardware manuals refer to these registers as the Standby Control Registers,
we'll use that name to distinguish the RZ/A type from the R-Car type.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Acked-by: Rob Herring <robh@kernel.org> # DT bits
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

The TMU clocks weren't present in the original R8A77970 patch by Daisuke
Matsushita, they were added in a later BSP version...

Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add the R8A77970 CMT module clocks.

Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

The clock for UARTs 0 through 2 is UART012, the clock for UARTs 3 through
7 is UART34567.
For UART012, we stop the clock driver from changing the clock rate. This
is because the Synopsys UART driver simply sets the reference clock to 16x
the baud rate, but doesn't check if the actual rate is within the required
tolerance. The RZ/N1 clock divider can't provide this (we have to rely on
the UART's internal divider to set the correct clock rate), so you end up
with a clock rate that is way off what you wanted.

In addition, since the clock is shared between multiple UARTs, you don't
want the driver trying to change the clock rate as it may affect the other
UARTs (which may not have been configured yet, so you don't know what baud
rate they will use). Normally, the clock rate is set early on before Linux
to some very high rate that supports all of the clock rates you want.

This change stops the UART34567 clock rate from changing for the same
reasons.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Fixes: 4c3d8852 ("clk: renesas: Renesas R9A06G032 clock driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

On R-Car V3M (AKA R8A77970), the SD0CKCR is laid out differently than on
the other R-Car gen3 SoCs. In fact, the layout is the same as on R-Car gen2
SoCs, so we'll need to copy the divisor tables from the R-Car gen2 driver.
We'll also need to support the SoC specific clock types, thus we're adding
CLK_TYPE_GEN3_SOC_BASE at the end of 'enum rcar_gen3_clk_types', declare
SD0H/SDH clocks in 'enum r8a77970_clk_types', and handle those clocks in
the overridden cpg_clk_register() method; then, finally, add the SD-IF
module clock (derived from the SD0 clock).
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Now that RCLK has been added by Geert, we can add the CMT module clocks.

Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

There is a potential execution path in which function
platform_get_resource() returns NULL. If this happens,
we will end up having a NULL pointer dereference.

Fix this by replacing devm_ioremap with devm_ioremap_resource,
which has the NULL check and the memory region request.

This code was detected with the help of Coccinelle.

Cc: stable@vger.kernel.org
Fixes: 97b7129c ("reset: hisilicon: change the definition of hisi_reset_init")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Merge tag 'clk-renesas-for-v4.20-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull Renesas clk driver updates from Geert Uytterhoeven:

  - Improve OSC and RCLK (watchdog) handling on R-Car Gen3 SoCs,
  - Add support for SATA and Fine Display Processor (FDP) clocks on
    R-Car M3-N,
  - Add support for the new RZ/G2M (r8a774a1) SoC,
  - Small fixes and clean ups.

* tag 'clk-renesas-for-v4.20-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: r8a77990: Add missing I2C7 clock
  clk: renesas: r8a77965: Add FDP clock
  clk: renesas: cpg-mssr: Add r8a774a1 support
  clk: renesas: Add r8a774a1 CPG Core Clock Definitions
  clk: renesas: r8a77965: Add SATA clock
  clk: renesas: r8a77980: Add RCLK for watchdog timer
  clk: renesas: rcar-gen3: Add support for mode pin clock selection
  clk: renesas: r8a77995: Correct RCLK handling
  clk: renesas: r8a77990: Correct RCLK handling
  clk: renesas: rcar-gen3: Add support for RCKSEL clock selection
  clk: renesas: cpg-mssr: Add support for fixed rate clocks
  clk: renesas: r8a77980: Add OSC predivider configuration and clock
  clk: renesas: r8a77965: Add OSC EXTAL predivider configuration
  clk: renesas: r8a7796: Add OSC EXTAL predivider configuration
  clk: renesas: r8a7795: Add OSC EXTAL predivider configuration
  clk: renesas: rcar-gen3: Add support for OSC EXTAL predivider
  clk: renesas: rcar-gen3: Rename rint to .r

When trying to use I2C7 on R-Car E3:

    renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 1003: -2
    i2c-rcar e6690000.i2c: failed to add to PM domain always-on: -2
    i2c-rcar: probe of e6690000.i2c failed with error -2

Unlike other R-Car Gen3 SoCs, R-Car E3 has more than 7 I2C bus
interfaces.  Add the forgotten module clock for the 8th instance to fix
this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>

Array audio_parents is declared but never used, hence it is redundant
and can be removed.

Cleans up clang warning:
warning: 'audio_parents' defined but not used [-Wunused-const-variable=]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Add support for the camera clock controller found on SDM845
based devices. This would allow camera drivers to probe and
control their clocks.
Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Add device tree bindings for camera clock controller for
Qualcomm Technology Inc's SDM845 SoCs.
Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

of_get_child_by_name() returns device node with refcount incremented,
but there is no decrement in cdce925_probe(). The patch adds one.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Return statements in functions returning bool should use true or false
instead of an integer value.

This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

The table allocated in clk_rcg2_dfs_populate_freq_table() is
eventually iterated over by qcom_find_freq() which assumes that the
table is NULL terminated.  Allocate one extra space in the array for
the NULL termination.  Initting of the NULL termination is implicit
due to kcalloc().

Fixes: cc4f6944 ("clk: qcom: Add support for RCG to register for DFS")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Fix child-node lookup which by using the wrong OF helper was searching
the whole tree depth-first, something which could end up matching an
unrelated node.

Also fix the related node-reference leaks.

Fixes: 5b385a45 ("clk: ti: add support for clkctrl aliases")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Add both the interface and core clock.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>