Pull device mapper fixes from Mike Snitzer:
 "Two additional fixes for changes introduced via DM during the 4.1
  merge window.

  The first reverts a dm-crypt change that wasn't correct.  The second
  fixes a device format regression that impacted userspace"

* tag 'dm-4.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  init: fix regression by supporting devices with major:minor:offset format
  Revert "dm crypt: fix deadlock when async crypto algorithm returns -EBUSY"

Pull block fixes from Jens Axboe:
 "A collection of fixes since the merge window;

   - fix for a double elevator module release, from Chao Yu.  Ancient bug.

   - the splice() MORE flag fix from Christophe Leroy.

   - a fix for NVMe, fixing a patch that went in in the merge window.
     From Keith.

   - two fixes for blk-mq CPU hotplug handling, from Ming Lei.

   - bdi vs blockdev lifetime fix from Neil Brown, fixing and oops in md.

   - two blk-mq fixes from Shaohua, fixing a race on queue stop and a
     bad merge issue with FUA writes.

   - division-by-zero fix for writeback from Tejun.

   - a block bounce page accounting fix, making sure we inc/dec after
     bouncing so that pre/post IO pages match up.  From Wang YanQing"

* 'for-linus' of git://git.kernel.dk/linux-block:
  splice: sendfile() at once fails for big files
  blk-mq: don't lose requests if a stopped queue restarts
  blk-mq: fix FUA request hang
  block: destroy bdi before blockdev is unregistered.
  block:bounce: fix call inc_|dec_zone_page_state on different pages confuse value of NR_BOUNCE
  elevator: fix double release of elevator module
  writeback: use |1 instead of +1 to protect against div by zero
  blk-mq: fix CPU hotplug handling
  blk-mq: fix race between timeout and CPU hotplug
  NVMe: Fix VPD B0 max sectors translation

Pull GPIO fixes from Linus Walleij:
 "Here is a bunch of GPIO fixes that I collected since -rc1, nothing
  controversial, nothing special:

   - fix a memory leak for GPIO hotplug.

   - fix a signedness bug in the ACPI GPIO pin validation.

   - driver fixes: Qualcomm SPMI and OMAP MPUIO IRQ issues"

* tag 'gpio-v4.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: omap: Fix regression for MPUIO interrupts
  gpio: sysfs: fix memory leaks and device hotplug
  pinctrl: qcom-spmi-gpio: Fix input value report
  pinctrl: qcom-spmi-gpio: Fix output type configuration
  gpiolib: change gpio pin from unsigned to signed in acpi callback

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Don't access RPMB partitions for normal read/write
   - Fix hibernation restore sequence

  MMC host:
   - dw_mmc: Fix card detection for non removable cards
   - dw_mmc: Fix sglist issue in 32-bit mode
   - sh_mmcif: Fix timeout value for command request"

* tag 'mmc-4.1-rc2' of git://git.linaro.org/people/ulf.hansson/mmc:
  mmc: dw_mmc: dw_mci_get_cd check MMC_CAP_NONREMOVABLE
  mmc: dw_mmc: init desc in dw_mci_idmac_init
  mmc: card: Don't access RPMB partitions for normal read/write
  mmc: sh_mmcif: Fix timeout value for command request
  mmc: core: add missing pm event in mmc_pm_notify to fix hib restore

Merge tag 'trace-fixes-v4.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fix from Steven Rostedt:
 "The newly added ftrace_print_array_seq() function had a bug in it.
  Luckily, the only user of it didn't make the 4.1 merge window.

  But the helper function should be fixed before 4.2 when the users
  start coming in"

* tag 'trace-fixes-v4.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Make ftrace_print_array_seq compute buf_len

When non-removable is used for emmc,  MMC_CAP_NONREMOVABLE should
also be checked, otherwise detection fail since present=0
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Set 0 to des1 in 32bit case.
Otherwise the random value of des1 will be used in
dw_mci_translate_sglist: IDMAC_SET_BUFFER1_SIZE(desc, length)
Signed-off-by: Fei Wang <w.f@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Pull power management and ACPI fixes from Rafael Wysocki:
 "These include three regression fixes (PCI resources management,
  ACPI/PNP device enumeration, ACPI SBS on MacBook) and two ACPI
  documentation fixes related to GPIO.

  Specifics:

   - Fix for a PCI resources management regression introduced during the
     4.0 cycle and related to the handling of ACPI resources'
     Producer/Consumer flags that turn out to be useless (Jiang Liu)

   - Fix for a MacBook regression related to the Smart Battery Subsystem
     (SBS) driver causing various problems (stalls on boot, failure to
     detect or report battery) to happen and introduced during the 3.18
     cycle (Chris Bainbridge)

   - Fix for an ACPI/PNP device enumeration regression introduced during
     the 3.16 cycle caused by failing to include two PNP device IDs into
     the list of IDs that PNP device objects need to be created for
     (Witold Szczeponik)

   - Fixes for two minor mistakes in the ACPI GPIO properties
     documentation (Antonio Ospite, Rafael J Wysocki)"

* tag 'pm+acpi-4.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PNP: add two IDs to list for PNPACPI device enumeration
  ACPI / documentation: Fix ambiguity in the GPIO properties document
  ACPI / documentation: fix a sentence about GPIO resources
  ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook
  x86/PCI/ACPI: Make all resources except [io 0xcf8-0xcff] available on PCI bus

* acpi-resources:
  x86/PCI/ACPI: Make all resources except [io 0xcf8-0xcff] available on PCI bus

* acpi-battery:
  ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook

* acpi-doc:
  ACPI / documentation: Fix ambiguity in the GPIO properties document
  ACPI / documentation: fix a sentence about GPIO resources

* acpi-pnp:
  ACPI / PNP: add two IDs to list for PNPACPI device enumeration

Pull f2fs fixes from Jaegeuk Kim:
 "Fix a performance regression and a bug"

* tag 'for-f2fs-4.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
  f2fs: fix wrong error hanlder in f2fs_follow_link
  Revert "f2fs: enhance multi-threads performance"

Pull pin control fixes from Linus Walleij:
 "Here is a smallish set of pin control fixes for the v4.1 cycle,
  collected the last two weeks:

   - fix a real nasty legacy bug that has screwed up the protection of
     adding pinctrl maps dynamically.  Normally this didn't happen so
     much but Dough Anderson ran into it and fixed it, kudos!

  - minor driver fixes for Qualcomm spmi, mediatek and Marvell drivers"

* tag 'pinctrl-v4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: Don't just pretend to protect pinctrl_maps, do it for real
  pinctrl: mediatek: mtk-common: initialize unmask
  pinctrl: qcom-spmi-mpp: Fix input value report
  pinctrl: qcom-spmi: Fix pin direction configuration
  pinctrl: mvebu: Fix mapping of pin 63 (gpo -> gpio)

Pull vfio fixes from Alex Williamson:
 "Fix some undesirable behavior with the vfio device request interface:

   - increase verbosity of device request channel (Alex Williamson)

   - fix runaway interruptible timeout (Alex Williamson)"

* tag 'vfio-v4.1-rc3' of git://github.com/awilliam/linux-vfio:
  vfio: Fix runaway interruptible timeout
  vfio-pci: Log device requests more verbosely

Pull infiniband updates from Doug Ledford:
 "Minor updates for 4.1-rc

  Most of the changes are fairly small and well confined.  The iWARP
  address reporting changes are the only ones that are a medium size.  I
  had these queued up prior to rc1, but due to the shuffle in
  maintainers, they did not get submitted when I expected.  My apologies
  for that.  I feel comfortable with them however due to the testing
  they've received, so I left them in this submission"

* tag 'for-linus' of git://github.com/dledford/linux:
  MAINTAINERS: Update InfiniBand subsystem maintainer
  MAINTAINERS: add include/rdma/ to InfiniBand subsystem
  IPoIB/CM: Fix indentation level
  iw_cxgb4: Remove negative advice dmesg warnings
  IB/core: Fix unaligned accesses
  IB/core: change rdma_gid2ip into void function as it always return zero
  IB/qib: use arch_phys_wc_add()
  IB/qib: add acounting for MTRR
  IB/core: dma unmap optimizations
  IB/core: dma map/unmap locking optimizations
  RDMA/cxgb4: Report the actual address of the remote connecting peer
  RDMA/nes: Report the actual address of the remote connecting peer
  RDMA/core: Enable the iWarp Port Mapper to provide the actual address of the connecting peer to its clients
  iw_cxgb4: enforce qp/cq id requirements
  iw_cxgb4: use BAR2 GTS register for T5 kernel mode CQs
  iw_cxgb4: 32b platform fixes
  iw_cxgb4: Cleanup register defines/MACROS
  RDMA/CMA: Canonize IPv4 on IPV6 sockets properly

The only caller to this function (__print_array) was getting it wrong by
passing the array length instead of buffer length. As the element size
was already being passed for other reasons it seems reasonable to push
the calculation of buffer length into the function.

Link: http://lkml.kernel.org/r/1430320727-14582-1-git-send-email-alex.bennee@linaro.orgSigned-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Pull xen bug fixes from David Vrabel:

 - fix blkback regression if using persistent grants

 - fix various event channel related suspend/resume bugs

 - fix AMD x86 regression with X86_BUG_SYSRET_SS_ATTRS

 - SWIOTLB on ARM now uses frames <4 GiB (if available) so device only
   capable of 32-bit DMA work.

* tag 'for-linus-4.1b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: Add __GFP_DMA flag when xen_swiotlb_init gets free pages on ARM
  hypervisor/x86/xen: Unset X86_BUG_SYSRET_SS_ATTRS on Xen PV guests
  xen/events: Set irq_info->evtchn before binding the channel to CPU in __startup_pirq()
  xen/console: Update console event channel on resume
  xen/xenbus: Update xenbus event channel on resume
  xen/events: Clear cpu_evtchn_mask before resuming
  xen-pciback: Add name prefix to global 'permissive' variable
  xen: Suspend ticks on all CPUs during suspend
  xen/grant: introduce func gnttab_unmap_refs_sync()
  xen/blkback: safely unmap purge persistent grants

Pull x86 fixes from Ingo Molnar:
 "EFI fixes, and FPU fix, a ticket spinlock boundary condition fix and
  two build fixes"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Always restore_xinit_state() when use_eager_cpu()
  x86: Make cpu_tss available to external modules
  efi: Fix error handling in add_sysfs_runtime_map_entry()
  x86/spinlocks: Fix regression in spinlock contention detection
  x86/mm: Clean up types in xlate_dev_mem_ptr()
  x86/efi: Store upper bits of command line buffer address in ext_cmd_line_ptr
  efivarfs: Ensure VariableName is NUL-terminated

Pull perf fixes from Ingo Molnar:
 "Mostly tooling fixes, but also an uncore PMU driver fix and an uncore
  PMU driver hardware-enablement addition"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf probe: Fix segfault if passed with ''.
  perf report: Fix -T/--threads option to work again
  perf bench numa: Fix immediate meeting of convergence condition
  perf bench numa: Fixes of --quiet argument
  perf bench futex: Fix hung wakeup tasks after requeueing
  perf probe: Fix bug with global variables handling
  perf top: Fix a segfault when kernel map is restricted.
  tools lib traceevent: Fix build failure on 32-bit arch
  perf kmem: Fix compiles on RHEL6/OL6
  tools lib api: Undefine _FORTIFY_SOURCE before setting it
  perf kmem: Consistently use PRIu64 for printing u64 values
  perf trace: Disable events and drain events when forked workload ends
  perf trace: Enable events when doing system wide tracing and starting a workload
  perf/x86/intel/uncore: Move PCI IDs for IMC to uncore driver
  perf/x86/intel/uncore: Add support for Intel Haswell ULT (lower power Mobile Processor) IMC uncore PMUs
  perf/x86/intel: Add cpu_(prepare|starting|dying) for core_pmu

Pull RCU fix from Ingo Molnar:
 "An RCU Kconfig fix that eliminates an annoying interactive kconfig
  question for CONFIG_RCU_TORTURE_TEST_SLOW_INIT"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rcu: Control grace-period delays directly from value

Using sendfile with below small program to get MD5 sums of some files,
it appear that big files (over 64kbytes with 4k pages system) get a
wrong MD5 sum while small files get the correct sum.
This program uses sendfile() to send a file to an AF_ALG socket
for hashing.

/* md5sum2.c */
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <fcntl.h>
#include <sys/socket.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <linux/if_alg.h>

int main(int argc, char **argv)
{
	int sk = socket(AF_ALG, SOCK_SEQPACKET, 0);
	struct stat st;
	struct sockaddr_alg sa = {
		.salg_family = AF_ALG,
		.salg_type = "hash",
		.salg_name = "md5",
	};
	int n;

	bind(sk, (struct sockaddr*)&sa, sizeof(sa));

	for (n = 1; n < argc; n++) {
		int size;
		int offset = 0;
		char buf[4096];
		int fd;
		int sko;
		int i;

		fd = open(argv[n], O_RDONLY);
		sko = accept(sk, NULL, 0);
		fstat(fd, &st);
		size = st.st_size;
		sendfile(sko, fd, &offset, size);
		size = read(sko, buf, sizeof(buf));
		for (i = 0; i < size; i++)
			printf("%2.2x", buf[i]);
		printf("  %s\n", argv[n]);
		close(fd);
		close(sko);
	}
	exit(0);
}

Test below is done using official linux patch files. First result is
with a software based md5sum. Second result is with the program above.

root@vgoip:~# ls -l patch-3.6.*
-rw-r--r--    1 root     root         64011 Aug 24 12:01 patch-3.6.2.gz
-rw-r--r--    1 root     root         94131 Aug 24 12:01 patch-3.6.3.gz

root@vgoip:~# md5sum patch-3.6.*
b3ffb9848196846f31b2ff133d2d6443  patch-3.6.2.gz
c5e8f687878457db77cb7158c38a7e43  patch-3.6.3.gz

root@vgoip:~# ./md5sum2 patch-3.6.*
b3ffb9848196846f31b2ff133d2d6443  patch-3.6.2.gz
5fd77b24e68bb24dcc72d6e57c64790e  patch-3.6.3.gz

After investivation, it appears that sendfile() sends the files by blocks
of 64kbytes (16 times PAGE_SIZE). The problem is that at the end of each
block, the SPLICE_F_MORE flag is missing, therefore the hashing operation
is reset as if it was the end of the file.

This patch adds SPLICE_F_MORE to the flags when more data is pending.

With the patch applied, we get the correct sums:

root@vgoip:~# md5sum patch-3.6.*
b3ffb9848196846f31b2ff133d2d6443  patch-3.6.2.gz
c5e8f687878457db77cb7158c38a7e43  patch-3.6.3.gz

root@vgoip:~# ./md5sum2 patch-3.6.*
b3ffb9848196846f31b2ff133d2d6443  patch-3.6.2.gz
c5e8f687878457db77cb7158c38a7e43  patch-3.6.3.gz
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Jens Axboe <axboe@fb.com>

Way back, when the world was a simpler place and there was no war, no
evil, and no kernel bugs, there was just a single pinctrl lock.  That
was how the world was when (57291ce2 pinctrl: core device tree mapping
table parsing support) was written.  In that case, there were
instances where the pinctrl mutex was already held when
pinctrl_register_map() was called, hence a "locked" parameter was
passed to the function to indicate that the mutex was already locked
(so we shouldn't lock it again).

A few years ago in (42fed7ba pinctrl: move subsystem mutex to
pinctrl_dev struct), we switched to a separate pinctrl_maps_mutex.
...but (oops) we forgot to re-think about the whole "locked" parameter
for pinctrl_register_map().  Basically the "locked" parameter appears
to still refer to whether the bigger pinctrl_dev mutex is locked, but
we're using it to skip locks of our (now separate) pinctrl_maps_mutex.

That's kind of a bad thing(TM).  Probably nobody noticed because most
of the calls to pinctrl_register_map happen at boot time and we've got
synchronous device probing.  ...and even cases where we're
asynchronous don't end up actually hitting the race too often.  ...but
after banging my head against the wall for a bug that reproduced 1 out
of 1000 reboots and lots of looking through kgdb, I finally noticed
this.

Anyway, we can now safely remove the "locked" parameter and go back to
a war-free, evil-free, and kernel-bug-free world.

Fixes: 42fed7ba ("pinctrl: move subsystem mutex to pinctrl_dev struct")
Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Make sure that xen_swiotlb_init allocates buffers that are DMA capable
when at least one memblock is available below 4G. Otherwise we assume
that all devices on the SoC can cope with >4G addresses. We do this on
ARM and ARM64, where dom0 is mapped 1:1, so pfn == mfn in this case.

No functional changes on x86.

From: Chen Baozi <baozich@gmail.com>
Signed-off-by: Chen Baozi <baozich@gmail.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Tested-by: Chen Baozi <baozich@gmail.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

At some point with all the GPIO clean-up we've broken the
MPUIO interrupts. Those are just a little bit different from
the GPIO interrupts, so we can fix it up just by setting
different irqchip functions for it. And then we can just
remove all old code trying to do the same.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@linaro.org>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

During kernel boot, it will try to read some logical sectors
of each block device node for the possible partition table.

But since RPMB partition is special and can not be accessed
by normal eMMC read / write CMDs, it will cause below error
messages during kernel boot:
...
 mmc0: Got data interrupt 0x00000002 even though no data operation was in progress.
 mmcblk0rpmb: error -110 transferring data, sector 0, nr 32, cmd response 0x900, card status 0xb00
 mmcblk0rpmb: retrying using single block read
 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
 end_request: I/O error, dev mmcblk0rpmb, sector 0
 Buffer I/O error on device mmcblk0rpmb, logical block 0
 end_request: I/O error, dev mmcblk0rpmb, sector 8
 Buffer I/O error on device mmcblk0rpmb, logical block 1
 end_request: I/O error, dev mmcblk0rpmb, sector 16
 Buffer I/O error on device mmcblk0rpmb, logical block 2
 end_request: I/O error, dev mmcblk0rpmb, sector 24
 Buffer I/O error on device mmcblk0rpmb, logical block 3
...

This patch will discard the access request in eMMC queue if
it is RPMB partition access request. By this way, it avoids
trigger above error messages.

Fixes: 090d25fe ("mmc: core: Expose access to RPMB partition")
Signed-off-by: Yunpeng Gao <yunpeng.gao@intel.com>
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Tested-by: Michael Shigorin <mike@altlinux.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

f9fd54f2 ("mmc: sh_mmcif: Use msecs_to_jiffies() for host->timeout")
changed the timeout value from 1000 jiffies to 1s. In the case where
HZ is 1000 the values are the same. However, for smaller HZ values the
timeout is now smaller, 1s instead of 10s in the case of HZ=100.

Since the timeout occurs in spite of a normal data transfer a timeout of
10s seems more appropriate. This restores the previous timeout in the
case where HZ=100 and results in an increase over the previous timeout
for larger values of HZ.

Fixes: f9fd54f2 ("mmc: sh_mmcif: Use msecs_to_jiffies() for host->timeout")
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[horms: rewrote changelog to refer to HZ]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The following commit:

  f893959b ("x86/fpu: Don't abuse drop_init_fpu() in flush_thread()")

removed drop_init_fpu() usage from flush_thread(). This seems to break
things for me - the Go 1.4 test suite fails all over the place with
floating point comparision errors (offending commit found through
bisection).

The functional change was that flush_thread() after this commit
only calls restore_init_xstate() when both use_eager_fpu() and
!used_math() are true. drop_init_fpu() (now fpu_reset_state()) calls
restore_init_xstate() regardless of whether current used_math() - apply
the same logic here.

Switch used_math() -> tsk_used_math(tsk) to consistently use the grabbed
tsk instead of current, like in the rest of flush_thread().
Tested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pekka Riikonen <priikone@iki.fi>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: f893959b ("x86/fpu: Don't abuse drop_init_fpu() in flush_thread()")
Link: http://lkml.kernel.org/r/1430147441-9820-1-git-send-email-bobbypowers@gmail.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent

Pull EFI fixes from Matt Fleming:

 * Avoid garbage names in efivarfs due to buggy firmware by zeroing
   EFI variable name. (Ross Lagerwall)

 * Stop erroneously dropping upper 32 bits of boot command line pointer
   in EFI boot stub and stash them in ext_cmd_line_ptr. (Roy Franz)

 * Fix double-free bug in error handling code path of EFI runtime map
   code. (Dan Carpenter)
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

  - Fix 'perf probe -a' segfault if passed with '' (Wang Nan)

  - Fix report -T/--threads option (Namhyung Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull IPMI fixes from Corey Minyard:
 "Lots of minor IPMI fixes, especially ones that have have come up since
  the SSIF driver has been in the main kernel for a while"

* tag 'for-linus-4.1-1' of git://git.code.sf.net/p/openipmi/linux-ipmi:
  ipmi: Fix multi-part message handling
  ipmi: Add alert handling to SSIF
  ipmi: Fix a problem that messages are not issued in run_to_completion mode
  ipmi: Report an error if ACPI _IFT doesn't exist
  ipmi: Remove unused including <linux/version.h>
  ipmi: Don't report err in the SI driver for SSIF devices
  ipmi: Remove incorrect use of seq_has_overflowed
  ipmi:ssif: Ignore spaces when comparing I2C adapter names
  ipmi_ssif: Fix the logic on user-supplied addresses

Merge misc fixes from Andrew Morton:
 "16 patches

  This includes a new rtc driver for the Abracon AB x80x and isn't very
  appropriate for -rc2.  It was still being fiddled with a bit during
  the merge window and I fell asleep during -rc1"

[ So I took the new driver, it seems small and won't regress anything.
  I'm a softy.   - Linus ]

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  rtc: armada38x: fix concurrency access in armada38x_rtc_set_time
  ocfs2: dlm: fix race between purge and get lock resource
  nilfs2: fix sanity check of btree level in nilfs_btree_root_broken()
  util_macros.h: have array pointer point to array of constants
  configfs: init configfs module earlier at boot time
  mm/hwpoison-inject: check PageLRU of hpage
  mm/hwpoison-inject: fix refcounting in no-injection case
  mm: soft-offline: fix num_poisoned_pages counting on concurrent events
  rtc: add rtc-abx80x, a driver for the Abracon AB x80x i2c rtc
  Documentation: bindings: add abracon,abx80x
  kasan: show gcc version requirements in Kconfig and Documentation
  mm/memory-failure: call shake_page() when error hits thp tail page
  lib: delete lib/find_last_bit.c
  MAINTAINERS: add co-maintainer for LED subsystem
  zram: add Designated Reviewer for zram in MAINTAINERS
  revert "zram: move compact_store() to sysfs functions area"

Merge tag 'platform-drivers-x86-v4.1-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver fixes from Darren Hart:
 "This includes a trivial warning and adding a Lenovo laptop to an
  existing quirk.

  I've held off on things like the latter in the past, but I didn't feel
  it was risky enough to push out to 4.2.

   - thinkpad_acpi:
        Fix warning for static not at beginning

   - ideapad_laptop:
        Add Lenovo G40-30 to devices without radio switch"

* tag 'platform-drivers-x86-v4.1-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  thinkpad_acpi: Fix warning for static not at beginning
  ideapad_laptop: Add Lenovo G40-30 to devices without radio switch

Lots of little fixes for multi-part messages:

The values was not being re-initialized, if something went wrong
handling a multi-part message and it got left in a bad state, it
might be an issue.

The commands were not correct when issuing multi-part reads, the
code was not passing in the proper value for commands.  Also clean
up some minor formatting issues.

Get the block number from the right location, limit the maximum send
message size to 63 bytes and explain why, and fix some minor sylistic
issues.
Signed-off-by: Corey Minyard <cminyard@mvista.com>

The SSIF interface can optionally have an SMBus alert come in when
data is ready.  Unfortunately, the IPMI spec gives wiggle room to
the implementer to allow them to always have the alert enabled,
even if the driver doesn't enable it.  So implement alerts.
If you don't in this situation, the SMBus alert handling will
constantly complain.
Signed-off-by: Corey Minyard <cminyard@mvista.com>

start_next_msg() issues a message placed in smi_info->waiting_msg
if it is non-NULL.  However, sender() sets a message to
smi_info->curr_msg and NULL to smi_info->waiting_msg in the context
of run_to_completion mode.  As the result, it leads an infinite
loop by waiting the completion of unissued message when leaving
dying message after kernel panic.

sender() should set the message to smi_info->waiting_msg not
curr_msg.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>

When probing an ACPI table, report a specific error, instead of just
returning an error, if _IFT doesn't exist.
Signed-off-by: Corey Minyard <cminyard@mvista.com>

Remove including <linux/version.h> that don't need it.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Corey Minyard <cminyard@mvista.com>

While setting the time, the RTC TIME register should not be accessed.
However due to hardware constraints, setting the RTC time involves
sleeping during 100ms.  This sleep was done outside the critical section
protected by the spinlock, so it was possible to read the RTC TIME
register and get an incorrect value.  This patch introduces a mutex for
protecting the RTC TIME access, unlike the spinlock it is allowed to
sleep in a critical section protected by a mutex.

The RTC STATUS register can still be used from the interrupt handler but
it has no effect on setting the time.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: <stable@vger.kernel.org>	[4.0]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There is a race window in dlm_get_lock_resource(), which may return a
lock resource which has been purged.  This will cause the process to
hang forever in dlmlock() as the ast msg can't be handled due to its
lock resource not existing.

    dlm_get_lock_resource {
        ...
        spin_lock(&dlm->spinlock);
        tmpres = __dlm_lookup_lockres_full(dlm, lockid, namelen, hash);
        if (tmpres) {
             spin_unlock(&dlm->spinlock);
             >>>>>>>> race window, dlm_run_purge_list() may run and purge
                              the lock resource
             spin_lock(&tmpres->spinlock);
             ...
             spin_unlock(&tmpres->spinlock);
        }
    }
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The range check for b-tree level parameter in nilfs_btree_root_broken()
is wrong; it accepts the case of "level == NILFS_BTREE_LEVEL_MAX" even
though the level is limited to values in the range of 0 to
(NILFS_BTREE_LEVEL_MAX - 1).

Since the level parameter is read from storage device and used to index
nilfs_btree_path array whose element count is NILFS_BTREE_LEVEL_MAX, it
can cause memory overrun during btree operations if the boundary value
is set to the level parameter on device.

This fixes the broken sanity check and adds a comment to clarify that
the upper bound NILFS_BTREE_LEVEL_MAX is exclusive.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Using the new find_closest() macro can result in the following sparse
warnings.

  drivers/hwmon/lm85.c:194:16: warning:
  		incorrect type in initializer (different modifiers)
  drivers/hwmon/lm85.c:194:16:    expected int *__fc_a
  drivers/hwmon/lm85.c:194:16:    got int static const [toplevel] *<noident>
  drivers/hwmon/lm85.c:210:16: warning:
  		incorrect type in initializer (different modifiers)
  drivers/hwmon/lm85.c:210:16:    expected int *__fc_a
  drivers/hwmon/lm85.c:210:16:    got int const *map

This is because the array passed to find_closest() will typically be
declared as array of constants, but the macro declares a non-constant
pointer to it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We need this earlier in the boot process to allow various subsystems to
use configfs (e.g Industrial IIO).

Also, debugfs is at core_initcall level and configfs should be on the same
level from infrastructure point of view.
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Suggested-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>