Pull gpio updates from Bartosz Golaszewski:

 - new driver for the Realtek Otto GPIO controller

 - ACPI support for gpio-mpc8xxx

 - edge event support for gpio-sch (+ Kconfig fixes)

 - Kconfig improvements in gpio-ich

 - fixes to older issues in gpio-mockup

 - ACPI quirk for ignoring EC wakeups on Dell Venue 10 Pro 5055

 - improve the GPIO aggregator code by using more generic interfaces
   instead of reimplementing them in the driver

 - convert the DT bindings for gpio-74x164 to yaml

 - documentation improvements

 - a slew of other minor fixes and improvements to GPIO drivers

* tag 'gpio-updates-for-v5.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (34 commits)
  dt-bindings: gpio: add YAML description for rockchip,gpio-bank
  gpio: mxs: remove useless function
  dt-bindings: gpio: fairchild,74hc595: Convert to json-schema
  gpio: it87: remove unused code
  gpio: 104-dio-48e: Fix coding style issues
  gpio: mpc8xxx: Add ACPI support
  gpio: ich: Switch to be dependent on LPC_ICH
  gpio: sch: Drop MFD_CORE selection
  gpio: sch: depends on LPC_SCH
  gpiolib: acpi: Add quirk to ignore EC wakeups on Dell Venue 10 Pro 5055
  gpio: sch: Hook into ACPI GPE handler to catch GPIO edge events
  gpio: sch: Add edge event support
  gpio: aggregator: Replace custom get_arg() with a generic next_arg()
  lib/cmdline: Export next_arg() for being used in modules
  gpio: omap: Use device_get_match_data() helper
  gpio: Add Realtek Otto GPIO support
  dt-bindings: gpio: Binding for Realtek Otto GPIO
  docs: kernel-parameters: Add gpio_mockup_named_lines
  docs: kernel-parameters: Move gpio-mockup for alphabetic order
  lib: bitmap: provide devm_bitmap_alloc() and devm_bitmap_zalloc()
  ...

Merge tag 'char-misc-5.13-rc1-round2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are two char/misc fixes for 5.13-rc1 to resolve reported issues.

  The first is a bugfix for the nitro_enclaves driver that fixed some
  important problems. The second was a dyndbg bugfix that resolved some
  reported problems in dynamic debugging control.

  Both have been in linux-next for a while with no reported issues"

* tag 'char-misc-5.13-rc1-round2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  dyndbg: fix parsing file query without a line-range suffix
  nitro_enclaves: Fix stale file descriptors on failed usercopy

Pull turbostat updates from Len Brown:
 "Bug fixes and a smattering of features"

* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (21 commits)
  tools/power turbostat: version 2021.05.04
  tools/power turbostat: Support "turbostat --hide idle"
  tools/power turbostat: elevate priority of interval mode
  tools/power turbostat: formatting
  tools/power turbostat: rename tcc variables
  tools/power turbostat: add TCC Offset support
  tools/power turbostat: save original CPU model
  tools/power turbostat: Fix Core C6 residency on Atom CPUs
  tools/power turbostat: Print the C-state Pre-wake settings
  tools/power turbostat: Enable tsc_tweak for Elkhart Lake and Jasper Lake
  tools/power turbostat: unmark non-kernel-doc comment
  tools/power/turbostat: Remove Package C6 Retention on Ice Lake Server
  tools/power turbostat: Fix offset overflow issue in index converting
  tools/power/turbostat: Fix turbostat for AMD Zen CPUs
  tools/power turbostat: update version number
  tools/power turbostat: Fix DRAM Energy Unit on SKX
  Revert "tools/power turbostat: adjust for temperature offset"
  tools/power turbostat: Support Ice Lake D
  tools/power turbostat: Support Alder Lake Mobile
  tools/power turbostat: print microcode patch level
  ...

Pull ktest updates from Steven Rostedt:

 - Added a KTEST section in the MAINTAINERS file

 - Included John Hawley as a co-maintainer

 - Add an example config that would work with VMware workstation guests

 - Cleanups to the code

* tag 'ktest-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Add KTEST section to MAINTAINERS file
  ktest: Re-arrange the code blocks for better discoverability
  ktest: Further consistency cleanups
  ktest: Fixing indentation to match expected pattern
  ktest: Adding editor hints to improve consistency
  ktest: Add example config for using VMware VMs
  ktest: Minor cleanup with uninitialized variable $build_options

Pull SafeSetID update from Micah Morton:
 "Simple code cleanup

  This just has a single three-line code cleanup to eliminate some
  unnecessary 'break' statements"

* tag 'safesetid-5.13' of git://github.com/micah-morton/linux:
  LSM: SafeSetID: Fix code specification by scripts/checkpatch.pl

Current dts files with "rockchip,gpio-bank" subnodes
are manually verified. In order to automate this process
the text that describes the compatible in rockchip,pinctrl.txt
is removed and converted to YAML in rockchip,gpio-bank.yaml.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Fix the following gcc warning:

drivers/gpio/gpio-mxs.c:63:19: warning: kernel/sys_ni.cunused function
'is_imx28_gpio'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Convert the Generic 8-bit shift register Device Tree binding
documentation to json-schema.

Rename from gpio-74x164 to fairchild,74hc595, as the former refers to
the Linux driver, and not to a hardware name.
Add the missing hog description.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Fix the following clang warning:

drivers/gpio/gpio-it87.c:128:20: warning: unused function 'superio_outw'
[-Wunused-function].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Fixed multiple bare uses of 'unsigned' without 'int'.
Fixed space around "*" operator.
Fixed function parameter alignment to opening parenthesis.
Reported by checkpatch.
Signed-off-by: Barney Goette <barneygoette@gmail.com>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Current implementation only supports DT, now add ACPI support.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Driver is neither dependent to PCI nor using MFD_CORE.
Replace those dependency and selection by dependency on LPC_ICH.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Since we are depended on LPC_SCH, which selects MFD_CORE,
we don't need to do it ourselves.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Since LPC_SCH provides GPIO functionality, GPIO_SCH should depend on
LPC_SCH to prevent kconfig warning and build errors:

WARNING: unmet direct dependencies detected for LPC_SCH
  Depends on [n]: HAS_IOMEM [=y] && PCI [=n]
  Selected by [y]:
  - GPIO_SCH [=y] && GPIOLIB [=y] && X86 [=y] && (X86 [=y] || COMPILE_TEST [=n]) && ACPI [=y]

and

../drivers/mfd/lpc_sch.c:204:1: warning: data definition has no type or storage class
 module_pci_driver(lpc_sch_driver);
 ^~~~~~~~~~~~~~~~~
../drivers/mfd/lpc_sch.c:204:1: error: type defaults to ‘int’ in declaration of ‘module_pci_driver’ [-Werror=implicit-int]
../drivers/mfd/lpc_sch.c:204:1: warning: parameter names (without types) in function declaration
../drivers/mfd/lpc_sch.c:197:26: warning: ‘lpc_sch_driver’ defined but not used [-Wunused-variable]
 static struct pci_driver lpc_sch_driver = {
                          ^~~~~~~~~~~~~~

Fixes: 6c46215d6b62 ("gpio: sch: Hook into ACPI GPE handler to catch GPIO edge events")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Denis Turischev <denis@compulab.co.il>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Like some other Bay and Cherry Trail SoC based devices the Dell Venue
10 Pro 5055 has an embedded-controller which uses ACPI GPIO events to
report events instead of using the standard ACPI EC interface for this.

The EC interrupt is only used to report battery-level changes and
it keeps doing this while the system is suspended, causing the system
to not stay suspended.

Add an ignore-wake quirk for the GPIO pin used by the EC to fix the
spurious wakeups from suspend.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Neither the ACPI description on Intel Minnowboard (v1) platform provides
the required information to establish a generic handling nor the hardware
capable of doing it. According to the data sheet the hardware can generate
SCI events. Therefore, we need to hook from the driver into GPE handler of
the ACPI subsystem in order to catch and report GPIO-related events.

Validated on the Inlel Minnowboard (v1) platform and Intel Galileo Gen 2.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Add the required infrastructure to enable and report edge events
of the pins to the GPIO core. The actual hook-up of the event interrupt
will happen separately.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

cmdline library provides next_arg() helper to traverse over parameters
and their values given in command line. Replace custom approach in the driver
by it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

At least one module will benefit from using next_arg() helper.
Let's export it for that module and others if they consider it
helpful.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Use the device_get_match_data() helper instead of open coding.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Realtek MIPS SoCs (platform name Otto) have GPIO controllers with up to
64 GPIOs, divided over two banks. Each bank has a set of registers for
32 GPIOs, with support for edge-triggered interrupts.

Each GPIO bank consists of four 8-bit GPIO ports (ABCD and EFGH). Most
registers pack one bit per GPIO, except for the IMR register, which
packs two bits per GPIO (AB-CD).

Although the byte order is currently assumed to have port A..D at offset
0x0..0x3, this has been observed to be reversed on other, Lexra-based,
SoCs (e.g. RTL8196E/97D/97F).

Interrupt support is disabled for the fallback devicetree-compatible
'realtek,otto-gpio'. This allows for quick support of GPIO banks in
which the byte order would be unknown. In this case, the port ordering
in the IMR registers may not match the reversed order in the other
registers (DCBA, and BA-DC or DC-BA).
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Add a binding description for Realtek's GPIO controller found on several
of their MIPS-based SoCs (codenamed Otto), such as the RTL838x and
RTL839x series of switch SoCs.

A fallback binding 'realtek,otto-gpio' is provided for cases where the
actual port ordering is not known yet, and enabling the interrupt
controller may result in uncaught interrupts.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Missing since introduced in the driver.

Fixes: 8a68ea00 ("gpio: mockup: implement naming the lines")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

All other sections are ordered alphabetically so do the same for
gpio-mockup.

Fixes: 0f98dd1b ("gpio/mockup: add virtual gpio device")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Provide managed variants of bitmap_alloc() and bitmap_zalloc().
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

For better readability and maintenance: order the includes in bitmap
source files alphabetically.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The 'extern' keyword doesn't have any benefits for functions in header
files. Remove it.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Pull UML updates from Richard Weinberger:

 - Disable CONFIG_GCOV when built with modules

 - Many fixes for W=1 related warnings

 - Code cleanup

* tag 'for-linus-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Fix W=1 missing-include-dirs warnings
  um: elf.h: Fix W=1 warning for empty body in 'do' statement
  um: pgtable.h: Fix W=1 warning for empty body in 'do' statement
  um: Remove unused including <linux/version.h>
  um: Add 2 missing libs to fix various build errors
  um: Replace if (cond) BUG() with BUG_ON()
  um: Disable CONFIG_GCOV with MODULES
  um: Remove unneeded variable 'ret'
  um: Mark all kernel symbols as local
  um: Fix tag order in stub_32.h

Pull JFFS2, UBI and UBIFS updates from Richard Weinberger:
 "JFFS2:
   - Use splice_write()
   - Fix for a slab-out-of-bounds bug

  UBI:
   - Fix for clang related warnings
   - Code cleanup

  UBIFS:
   - Fix for inode rebirth at replay
   - Set s_uuid
   - Use zstd for default filesystem"

* tag 'for-linus-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubi: Remove unnecessary struct declaration
  jffs2: Hook up splice_write callback
  jffs2: avoid Wempty-body warnings
  jffs2: Fix kasan slab-out-of-bounds problem
  ubi: Fix fall-through warnings for Clang
  ubifs: Report max LEB count at mount time
  ubifs: Set s_uuid in super block to support ima/evm uuid options
  ubifs: Default to zstd compression
  ubifs: Only check replay with inode type to judge if inode linked

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we added a new mount option, "checkpoint_merge", which
  introduces a kernel thread dealing with the f2fs checkpoints. Once we
  start to manage the IO priority along with blk-cgroup, the checkpoint
  operation can be processed in a lower priority under the process
  context. Since the checkpoint holds all the filesystem operations, we
  give a higher priority to the checkpoint thread all the time.

  Enhancements:
   - introduce gc_merge mount option to introduce a checkpoint thread
   - improve to run discard thread efficiently
   - allow modular compression algorithms
   - expose # of overprivision segments to sysfs
   - expose runtime compression stat to sysfs

  Bug fixes:
   - fix OOB memory access by the node id lookup
   - avoid touching checkpointed data in the checkpoint-disabled mode
   - fix the resizing flow to avoid kernel panic and race conditions
   - fix block allocation issues on pinned files
   - address some swapfile issues
   - fix hugtask problem and kernel panic during atomic write operations
   - don't start checkpoint thread in RO

  And, we've cleaned up some kernel coding style and build warnings. In
  addition, we fixed some minor race conditions and error handling
  routines"

* tag 'f2fs-for-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (48 commits)
  f2fs: drop inplace IO if fs status is abnormal
  f2fs: compress: remove unneed check condition
  f2fs: clean up left deprecated IO trace codes
  f2fs: avoid using native allocate_segment_by_default()
  f2fs: remove unnecessary struct declaration
  f2fs: fix to avoid NULL pointer dereference
  f2fs: avoid duplicated codes for cleanup
  f2fs: document: add description about compressed space handling
  f2fs: clean up build warnings
  f2fs: fix the periodic wakeups of discard thread
  f2fs: fix to avoid accessing invalid fio in f2fs_allocate_data_block()
  f2fs: fix to avoid GC/mmap race with f2fs_truncate()
  f2fs: set checkpoint_merge by default
  f2fs: Fix a hungtask problem in atomic write
  f2fs: fix to restrict mount condition on readonly block device
  f2fs: introduce gc_merge mount option
  f2fs: fix to cover __allocate_new_section() with curseg_lock
  f2fs: fix wrong alloc_type in f2fs_do_replace_block
  f2fs: delete empty compress.h
  f2fs: fix a typo in inode.c
  ...

Signed-off-by: Len Brown <len.brown@intel.com>

As idle, in particular, can have many columns on some machines...
Make it easy to ignore them all at once.
Signed-off-by: Len Brown <len.brown@intel.com>

This makes interval mode less likely to see delayed
results on a heavily loaded system.
Signed-off-by: Len Brown <len.brown@intel.com>

Spring is here...
run a long overdue Lendent on turbostat.c

no functional change
Signed-off-by: Len Brown <len.brown@intel.com>

There are two TCC activation temeprature.
One is the default TCC activation temperature, also known as TJ_MAX.
Another one is the effective TCC activation temperature, which is the
subtraction of default TCC activation temperature and TCC offset.

The name of variable tcc_activation_temp might be misleading here.
Thus rename tcc_activation_temp to tj_max, and use tcc_default and
tcc_offset to calculate the effective TCC activation temperature.

No functional change in this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

The length of TCC Offset bits varies on different platforms.
Decode TCC Offset bits only for the platforms that we have verified.
For the others, only show default TCC activation temperature.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

CPU model may get changed in intel_model_duplicates() for code reuse.
But there are still some cases we need the original CPU model to handle
minor differences between generations.

Thus save the original CPU model.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

For Atom CPUs that have core cstate deeper than C6,
MSR_CORE_C6_RESIDENCY actually returns the residency for both CC6 and
deeper Core cstates.
Thus, the real Core C6 residency should be the subtraction of
MSR_CORE_C6_RESIDENCY return value and MSR_CORE_C6_RESIDENCY return value.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

C-state pre-wake setting[1] is an optimization for some Intel CPUs to
be woken up from deep C-states in order to reduce latency. According to
the spec, the BIT30 is the C-state Pre-wake Disable. Expose this setting
accordingly.
Sample output from turbostat:
...
cpu51: MSR_IA32_POWER_CTL: 0x1a00a40059 (C1E auto-promotion: DISabled)
C-state Pre-wake: ENabled
cpu51: MSR_TURBO_RATIO_LIMIT: 0x2021212121212224
...

[1] https://intel.github.io/wult/#c-state-pre-wakeSigned-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

It was found that on Elkhart Lake the TSC frequency is driven by
a separate crystal-clock domain, which is different from the
BCLK domain which includes mperf. This has result in small different
speed thus inconsistence between TSC and the mperf, which caused the
Busy% to be higher than 100%. On this platform it seems that the mperf
runs faster than tsc when the CPU is 100% utilized:
delta tsc(18815473183) < delta mperf(18958403680) for 10 seconds.

To align TSC with mperf, leverage the tsc_tweak mechanism introduced for
cores newer than Skylake, so that TSC and mperf would be calculated in
the same domain.
Reported-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>