- 08 Jun, 2022 27 commits
-
-
Mohammad Zafar Ziya authored
Add jpeg vmid update under IB submit Signed-off-by:
Mohammad Zafar Ziya <Mohammadzafar.ziya@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Yifan Zhang authored
invalid/prime icahce operation takes effect both pipes cuconrrently, therefore CP_MES_IC_BASE_LO/HI and CP_MES_MDBASE_LO/HI both have to be set before prime icache. Otherwise MES hardware gets garbage data in above regsters and causes page fault [ 470.873200] amdgpu 0000:33:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:217 vmid:0 pasid:0, for process pid 0 thread pid 0) [ 470.873222] amdgpu 0000:33:00.0: amdgpu: in page starting at address 0x000092cb89b00000 from client 10 [ 470.873234] amdgpu 0000:33:00.0: amdgpu: GCVM_L2_PROTECTION_FAULT_STATUS:0x00000BB3 [ 470.873242] amdgpu 0000:33:00.0: amdgpu: Faulty UTCL2 client ID: CPC (0x5) [ 470.873247] amdgpu 0000:33:00.0: amdgpu: MORE_FAULTS: 0x1 [ 470.873251] amdgpu 0000:33:00.0: amdgpu: WALKER_ERROR: 0x1 [ 470.873256] amdgpu 0000:33:00.0: amdgpu: PERMISSION_FAULTS: 0xb [ 470.873260] amdgpu 0000:33:00.0: amdgpu: MAPPING_ERROR: 0x1 [ 470.873264] amdgpu 0000:33:00.0: amdgpu: RW: 0x0 Signed-off-by:
Yifan Zhang <yifan1.zhang@amd.com> Acked-by:
Tim Huang <Tim.Huang@amd.com> Signed-off-by:
-
Evan Quan authored
PMFW will handle that properly. Driver involvement may cause some unexpected issues. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
-
Evan Quan authored
Drop those redundant declarations in smu_v13_0.h. Signed-off-by:
-
Evan Quan authored
Fulfill the interfaces for mode1 reset related. Signed-off-by:
-
Evan Quan authored
Make sure the clockgating feature is supported before action. Otherwise, the feature may be disabled unexpectedly on enablement request. Signed-off-by:
-
Evan Quan authored
Enable ASPM support for PCIE 7.4.0 and 7.6.0. Signed-off-by:
-
Evan Quan authored
Drop extra CMN2ASIC_MAPPING_FEATURE transform. Also some cosmetic fixes for better readability. Signed-off-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Evan Quan authored
As there is actually no direct dependence between them. Signed-off-by:
-
Evan Quan authored
The new 78.40.0 PMFW has this feature supported. Signed-off-by:
-
ZhenGuo Yin authored
The scratch register should be accessed through MMIO instead of RLCG in SRIOV, since it being used in RLCG register access function. Fixes: d54762cc ("drm/amdgpu: nuke dynamic gfx scratch reg allocation") Signed-off-by:
ZhenGuo Yin <zhenguo.yin@amd.com> Reviewed-by:
-
Xiaohui Zhang authored
Similar to the handling of amdgpu_sa_bo_next_hole in commit 6a15f3ff ("drm/amdgpu: Initialize fences array entries in amdgpu_sa_bo_next_hole"), we thought a patch might be needed here as well. The entries were only initialized once in radeon_sa_bo_new. If a fence wasn't signalled yet in the first radeon_sa_bo_next_hole call, but then got signalled before a later radeon_sa_bo_next_hole call, it could destroy the fence but leave its pointer in the array, resulting in use-after-free in radeon_sa_bo_new. Signed-off-by:
Xiaohui Zhang <xiaohuizhang@ruc.edu.cn> Signed-off-by:
-
Felix Kuehling authored
Removed an unused parameter from two functions and added kernel-doc comments. Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
Philip Yang <Philip.Yang@amd.com> Signed-off-by:
-
Rodrigo Siqueira authored
GCC throw warnings for the function dcn21_update_bw_bounding_box and dcn316_update_bw_bounding_box due to its frame size that looks like this: error: the frame size of 1936 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] For fixing this issue I dropped an intermadiate variable. Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Ramesh Errabolu authored
Extend KFD device topology to surface peer-to-peer links among GPU devices connected over PCIe or xGMI. Enabling HSA_AMD_P2P is REQUIRED to surface peer-to-peer links. Prior to this KFD did not expose to user mode any P2P links or indirect links that go over two or more direct hops. Old versions of the Thunk used to make up their own P2P and indirect links without the information about peer-accessibility and chipset support available to the kernel mode driver. In this patch we expose P2P links in a new sysfs directory to provide more reliable P2P link information to user mode. Old versions of the Thunk will continue to work as before and ignore the new directory. This avoids conflicts between P2P links exposed by KFD and P2P links created by the Thunk itself. New versions of the Thunk will use only the P2P links provided in the new p2p_links directory, if it exists, or fall back to the old code path on older KFDs that don't expose p2p_links. Signed-off-by:
Ramesh Errabolu <Ramesh.Errabolu@amd.com> Reviewed-by:
-
Xiaohui Zhang authored
Similar to the handling of amdgpu_mode_dumb_create in commit 54ef0b54 ("drm/amdgpu: integer overflow in amdgpu_mode_dumb_create()"), we thought a patch might be needed here as well. args->size is a u64. arg->pitch and args->height are u32. The multiplication will overflow instead of using the high 32 bits as intended. Signed-off-by:
-
Alex Deucher authored
This is the same as the default case, so drop the extra logic. Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Signed-off-by:
-
Rodrigo Siqueira authored
GCC throw warnings for the function dcn31_update_bw_bounding_box and dcn316_update_bw_bounding_box due to its frame size that looks like this: error: the frame size of 1936 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] For fixing this issue I dropped an intermadiate variable. Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by:
-
Rodrigo Siqueira authored
GCC throw warnings for the function dcn301_fpu_update_bw_bounding_box due to its frame size that looks like this: error: the frame size of 1936 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] For fixing this issue I dropped an intermadiate variable. Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by:
-
Aurabindo Pillai authored
[Why] 0 was passed in place of a pointer which triggered null pointer dereference. Causes a backtrace like: [ 41.159466] RIP: 0010:dccg31_set_audio_dtbclk_dto+0x10/0x120 [amdgpu] [ 41.159928] Code: c0 00 00 00 6a 01 8b 92 84 01 00 00 52 0f b6 40 61 e9 30 ff ff ff 0f 1f 40 00 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 53 <44> 8b 66 18 48 89 fb 48 8b 47 30 48 8b 3f 45 85 e4 74 09 4c 63 6e [ 41.159932] RSP: 0018:ffffaee54055afd0 EFLAGS: 00010246 [ 41.159936] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff917445901800 [ 41.159939] RDX: ffffffffc15e6ca0 RSI: 0000000000000000 RDI: ffff91744dbd8c60 [ 41.159941] RBP: ffffaee54055aff0 R08: 0000000000000100 R09: ffffaee54055afe8 [ 41.159944] R10: 0000000000000001 R11: 0000000000000009 R12: ffff91747ca201f0 [ 41.159946] R13: ffff91747ca20000 R14: ffff917448720438 R15: ffff91747ca20000 [ 41.159948] FS: 00007f5e13e5f740(0000) GS:ffff91775ca40000(0000) knlGS:0000000000000000 [ 41.159951] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 41.159954] CR2: 0000000000000018 CR3: 000000010fea0000 CR4: 00000000003506e0 [ 41.159956] Call Trace: [ 41.159959] <TASK> [ 41.159964] dce110_setup_audio_dto.isra.0+0xd8/0x1f0 [amdgpu] [ 41.160411] dce110_apply_ctx_to_hw+0x1aa/0x780 [amdgpu] [ 41.160842] ? __free_pages+0x88/0xb0 [ 41.160850] ? kfree+0x360/0x3e0 [ 41.160857] dc_commit_state+0x337/0xac0 [amdgpu] [ 41.161135] amdgpu_dm_atomic_commit_tail+0x5e3/0x2680 [amdgpu] [How] Pass in a pointer that contains nullified parameters instead of null pointer. Fixes: 405bb9ee ("drm/amd/display: Implement DTBCLK ref switching on dcn32") Signed-off-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by:
-
Ramesh Errabolu authored
Add support for peer-to-peer communication among AMD GPUs over PCIe bus. Support REQUIRES enablement of config HSA_AMD_P2P. Signed-off-by:
-
Ramesh Errabolu authored
Extend current kernel config requirements of amdgpu by adding config HSA_AMD_P2P. Enabling HSA_AMD_P2P is REQUIRED to support peer-to-peer communication between AMD GPU devices over PCIe bus Signed-off-by:
-
Rodrigo Siqueira authored
GCC throw warnings for the function dcn20_update_bounding_box due to its frame size that looks like this: error: the frame size of 1936 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] This commit fixes this issue by eliminating an intermediary variable that creates a large array. Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by:
-
Rodrigo Siqueira authored
Reviewed-by:
-
Joseph Greathouse authored
All other chips, from gfx6-gfx10, now include the MODE register at the end of the wave debug state. This appears to have been missed in gfx11, so this patch adds in MODE to the debug state for gfx11. Signed-off-by:
Joseph Greathouse <Joseph.Greathouse@amd.com> Reviewed-by:
-
Arunpravin Paneer Selvam authored
Fix alignment problems reported by zuul for the commit b07d1d73 ("drm/amd/amdgpu: Enable high priority gfx queue") Fixes: b07d1d73 ("drm/amd/amdgpu: Enable high priority gfx queue") Signed-off-by:
Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Reviewed-by:
-
Jesse Zhang authored
fix fw error when loading fw for 10.3.6 Signed-off-by:
Jesse Zhang <Jesse.Zhang@amd.com> Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Reviewed-by:
-
- 07 Jun, 2022 13 commits
-
-
Robin Chen authored
[Why] To wrap the decision logic of sending dirty rect dmub command for both frame update and cursor update path. Signed-off-by:
Robin Chen <po-tchen@amd.com> Acked-by:
Leo Li <sunpeng.li@amd.com> Reviewed-by:
-
David Zhang authored
[Why] In cases where there are multiple eDP instances, DMUB needs to know which instance the command is for. Today, the field for specifying the panel_inst exists in both dmub_cmd_update_dirty_rect_data and dmub_cmd_update_cursor_info_data. For cursor updates, we already specify the panel_inst, but that's not the case for dirty_rect updates. Today, a value of '0' is used (due to initial memsetting of the cmd struct to 0) [how] In dc_dmub_update_dirty_rect(), Call dc_get_edp_link_panel_inst() to get the panel_inst, and fill it in the DMUB cmd struct. v2: Update commit message for clarity. Signed-off-by:
Mikita Lipski <mikita.lipski@amd.com> Signed-off-by:
David Zhang <dingchen.zhang@amd.com> Acked-by:
-
David Zhang authored
[Why] PSR-SU Rate Control - or PSR-SU-RC - enables PSR-SU panels to work with variable refresh rate to allow for more power savings. Lowering the refresh rate can increase PSR residency by expanding the eDP main link shut down duration. It can also lower panel power consumption. There is a complication with PSR, since the eDP main link can be shut down. Therefore, the timing controller (TCON) on the eDP sink nees to be able to scan out its remote buffer independent of the main link. To allow the eDP source to specify the sink's refresh rate while the link is off, vendor-specific DPCD registers are used. This allows the eDP source to then "Rate Control" the panel during PSR active. [How] Add DC support to communicate with PSR-SU-RC supported eDP sinks. The sink will need to know the desired VTotal during PSR active. This change only adds support to DC, support in amdgpu_dm is still pending to enable this fully. Signed-off-by:
-
David Zhang authored
[why & how] Expose vendor specific DPCD registers for rate controlling the eDP sink TCON's refresh rate during PSR active. When used in combination with PSR-SU and Freesync, it is called PSR-SU Rate Contorol, or PSR-SU-RC for short. v2: Add all DPCD registers required Signed-off-by:
-
Aric Cyr authored
This version brings along the following: - DPP DTO fix - Transient encoder fix - Restrict the reading of LTTPR capabilities in LTTPR mode - Increase maximum stages for BB - Distinguish HDMI DTO from DP DTO Acked-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Chris Park authored
[Why] For Pixel Rate control, when on HDMI, HDMI DTO should be selected instead of DP DTO. [How] Add HDMI member to dtbclk_dto_params, so it can be used tell apart HDMI and DP DTO in the future. Reviewed-by:
Alvin Lee <Alvin.Lee2@amd.com> Acked-by:
Chris Park <chris.park@amd.com> Tested-by:
-
Lei, Jun authored
[why] Some parts are consuming dangerously close to maximum number of states supported when updating the BB (i.e. 8). [how] Change maximum stages from 9 to 20. Reviewed-by:
Jun Lei <jun.lei@amd.com> Tested-by:
-
Jimmy Kizito authored
[Why] In some scenarios it is possible for the encoder assignment module to be set to "transient" mode even though there are no new encoder assignments. This can lead to incorrect results when querying encoder assignment, which in turn can cause incorrect displays to be manipulated. [How] Only allow encoder assignment to be in transient mode of operation when there are valid new encoder assignments. Reviewed-by:
Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com> Reviewed-by:
Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by:
-
Duncan Ma authored
[Why] When switching from 1 pipe to 4to1 mpc combine, DppDtoClk aren't enabled for the disabled pipes pior to programming the pipes. Upon optimizing bandwidth, DppDto are enabled causing intermittent underflow. [How] Update dppclk dto whenever pipe are flagged to enable. Reviewed-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Reviewed-by:
Hansen Dsouza <Hansen.Dsouza@amd.com> Acked-by:
Duncan Ma <duncan.ma@amd.com> Tested-by:
-
Aric Cyr authored
This version brings along the following: - Optimized blank calculations - More robust DP MST hotplug support - eDP bug fix relating to ODM - Revert a patch that caused a regression with DP - min comp buffer size fix - Make DP easier to debug - Calculate the maximum OLED brightness correctly - 3 plane MPO. Acked-by:
-
Anthony Koo authored
Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Tested-by:
-
Hansen Dsouza authored
[why and how] 3 plane MPO is a new feature missing in a few resource files Enable 3 plane MPO by setting slave planes to 2 Reviewed-by:
Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by:
-
Roman Li authored
[Why] For OLED eDP the Display Manager uses max_cll value as a limit for brightness control. max_cll defines the content light luminance for individual pixel. Whereas max_fall defines frame-average level luminance. The user may not observe the difference in brightness in between max_fall and max_cll. That negatively impacts the user experience. [How] Use max_fall value instead of max_cll as a limit for brightness control. Reviewed-by:
Roman Li <roman.li@amd.com> Tested-by:
-
