- 23 Aug, 2022 40 commits
-
-
Vladimir Oltean authored
More logic will be added to dsa_tree_setup_master() and dsa_tree_teardown_master() in upcoming changes. Reduce the indentation by one level in these functions by introducing and using a dedicated iterator for CPU ports of a tree. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Vladimir Oltean authored
The fact that the tagging protocol is set and queried from the /sys/class/net/<dsa-master>/dsa/tagging file is a bit of a quirk from the single CPU port days which isn't aging very well now that DSA can have more than a single CPU port. This is because the tagging protocol is a switch property, yet in the presence of multiple CPU ports it can be queried and set from multiple sysfs files, all of which are handled by the same implementation. The current logic ensures that the net device whose sysfs file we're changing the tagging protocol through must be down. That net device is the DSA master, and this is fine for single DSA master / CPU port setups. But exactly because the tagging protocol is per switch [ tree, in fact ] and not per DSA master, this isn't fine any longer with multiple CPU ports, and we must iterate through the tree and find all DSA masters, and make sure that all of them are down. Signed-off-by:
-
Vladimir Oltean authored
This is an adaptation of commit c0a8a9c2 ("net: dsa: automatically bring user ports down when master goes down") for multiple DSA masters. When a DSA master goes down, only the user ports under its control should go down too, the others can still send/receive traffic. Signed-off-by:
-
Vladimir Oltean authored
All the traffic to/from a DSA master is supposed to be distributed among its DSA switch upper interfaces, so we should not allow other upper device kinds. An exception to this is DSA_TAG_PROTO_NONE (switches with no DSA tags), and in that case it is actually expected to create e.g. VLAN interfaces on the master. But for those, netdev_uses_dsa(master) returns false, so the restriction doesn't apply. The motivation for this change is to allow LAG interfaces of DSA masters to be DSA masters themselves. We want to restrict the user's degrees of freedom by 1: the LAG should already have all DSA masters as lowers, and while lower ports of the LAG can be removed, none can be added after the fact. Signed-off-by:
-
Vladimir Oltean authored
When DSA gains support for multiple CPU ports in a LAG, it will become mandatory to monitor the changeupper events for the DSA master. In fact, there are already some restrictions to be imposed in that area, namely that a DSA master cannot be a bridge port except in some special circumstances. Centralize the restrictions at the level of the DSA layer as a preliminary step. Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
-
Vladimir Oltean authored
dsa_slave_prechangeupper_sanity_check() is supposed to enforce some adjacency restrictions, and calls ds->ops->port_prechangeupper if the driver implements it. We convert the error code from the port_prechangeupper() call to a notifier code, and 0 is converted to NOTIFY_OK, but the caller of dsa_slave_prechangeupper_sanity_check() stops at any notifier code different from NOTIFY_DONE. Avoid this by converting back the notifier code to an error code, so that both NOTIFY_OK and NOTIFY_DONE will be seen as 0. This allows more parallel sanity check functions to be added. Signed-off-by:
-
Vladimir Oltean authored
Traditionally, DSA has had a single netdev notifier handling function for each device type. For the sake of code cleanliness, we would like to introduce more handling functions which do one thing, but the conditions for entering these functions start to overlap. Example: a handling function which tracks whether any bridges contain both DSA and non-DSA interfaces. Either this is placed before dsa_slave_changeupper(), case in which it will prevent that function from executing, or we place it after dsa_slave_changeupper(), case in which we will prevent it from executing. The other alternative is to ignore errors from the new handling function (not ideal). To support this usage, we need to change the pattern. In the new model, we enter all notifier handling sub-functions, and exit with NOTIFY_DONE if there is nothing to do. This allows the sub-functions to be relatively free-form and independent from each other. Signed-off-by:
-
Paolo Abeni authored
Arseniy Krasnov says: ==================== vsock: updates for SO_RCVLOWAT handling This patchset includes some updates for SO_RCVLOWAT: 1) af_vsock: During my experiments with zerocopy receive, i found, that in some cases, poll() implementation violates POSIX: when socket has non- default SO_RCVLOWAT(e.g. not 1), poll() will always set POLLIN and POLLRDNORM bits in 'revents' even number of bytes available to read on socket is smaller than SO_RCVLOWAT value. In this case,user sees POLLIN flag and then tries to read data(for example using 'read()' call), but read call will be blocked, because SO_RCVLOWAT logic is supported in dequeue loop in af_vsock.c. But the same time, POSIX requires that: "POLLIN Data other than high-priority data may be read without blocking. POLLRDNORM Normal data may be read without blocking." See https://www.open-std.org/jtc1/sc22/open/n4217.pdf, page 293. So, we have, that poll() syscall returns POLLIN, but read call will be blocked. Also in man page socket(7) i found that: "Since Linux 2.6.28, select(2), poll(2), and epoll(7) indicate a socket as readable only if at least SO_RCVLOWAT bytes are available." I checked TCP callback for poll()(net/ipv4/tcp.c, tcp_poll()), it uses SO_RCVLOWAT value to set POLLIN bit, also i've tested TCP with this case for TCP socket, it works as POSIX required. I've added some fixes to af_vsock.c and virtio_transport_common.c, test is also implemented. 2) virtio/vsock: It adds some optimization to wake ups, when new data arrived. Now, SO_RCVLOWAT is considered before wake up sleepers who wait new data. There is no sense, to kick waiter, when number of available bytes in socket's queue < SO_RCVLOWAT, because if we wake up reader in this case, it will wait for SO_RCVLOWAT data anyway during dequeue, or in poll() case, POLLIN/POLLRDNORM bits won't be set, so such exit from poll() will be "spurious". This logic is also used in TCP sockets. 3) vmci/vsock: Same as 2), but i'm not sure about this changes. Will be very good, to get comments from someone who knows this code. 4) Hyper-V: As Dexuan Cui mentioned, for Hyper-V transport it is difficult to support SO_RCVLOWAT, so he suggested to disable this feature for Hyper-V. ==================== Link: https://lore.kernel.org/r/de41de4c-0345-34d7-7c36-4345258b7ba8@sberdevices.ruSigned-off-by: -
Arseniy Krasnov authored
This adds test to check, that when poll() returns POLLIN, POLLRDNORM bits, next read call won't block. Signed-off-by:
Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
-
Arseniy Krasnov authored
This adds extra condition to wake up data reader: do it only when number of readable bytes >= SO_RCVLOWAT. Otherwise, there is no sense to kick user, because it will wait until SO_RCVLOWAT bytes will be dequeued. This check is performed in vsock_data_ready(). Signed-off-by:
Vishnu Dasa <vdasa@vmware.com> Signed-off-by:
-
Arseniy Krasnov authored
This adds extra condition to wake up data reader: do it only when number of readable bytes >= SO_RCVLOWAT. Otherwise, there is no sense to kick user,because it will wait until SO_RCVLOWAT bytes will be dequeued. This check is performed in vsock_data_ready(). Signed-off-by:
-
Arseniy Krasnov authored
This adds 'vsock_data_ready()' which must be called by transport to kick sleeping data readers. It checks for SO_RCVLOWAT value before waking user, thus preventing spurious wake ups. Based on 'tcp_data_ready()' logic. Signed-off-by:
-
Arseniy Krasnov authored
Passing 1 as the target to notify_poll_in(), we don't honor what the user has set via SO_RCVLOWAT, going to set POLLIN and POLLRDNORM, even if we don't have the amount of bytes expected by the user. Let's use sock_rcvlowat() to get the right target to pass to notify_poll_in(); Signed-off-by:
-
Arseniy Krasnov authored
This callback controls setting of POLLIN, POLLRDNORM output bits of poll() syscall, but in some cases, it is incorrectly to set it, when socket has at least 1 bytes of available data. Use 'target' which is already exists. Signed-off-by:
-
Arseniy Krasnov authored
This callback controls setting of POLLIN, POLLRDNORM output bits of poll() syscall, but in some cases, it is incorrectly to set it, when socket has at least 1 bytes of available data. Use 'target' which is already exists. Signed-off-by:
-
Arseniy Krasnov authored
For Hyper-V it is quiet difficult to support this socket option,due to transport internals, so disable it. Signed-off-by:
Dexuan Cui <decui@microsoft.com> Reviewed-by:
-
Arseniy Krasnov authored
This adds transport specific callback for SO_RCVLOWAT, because in some transports it may be difficult to know current available number of bytes ready to read. Thus, when SO_RCVLOWAT is set, transport may reject it. Signed-off-by:
-
Zhengchao Shao authored
In rtnetlink_rcv_msg function, the permission for all user operations is checked except the GET operation, which is the same as the checking in qdisc. Therefore, remove the user rights check in qdisc. Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Message-Id: <20220819041854.83372-1-shaozhengchao@huawei.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-08-18 (ixgbe) This series contains updates to ixgbe driver only. Fabio M. De Francesco replaces kmap() call to page_address() for rx_buffer->page(). Jeff Daly adds a manual AN-37 restart to help resolve issues with some link partners. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ixgbe: Manual AN-37 for troublesome link partners for X550 SFI ixgbe: Don't call kmap() on page allocated with GFP_ATOMIC ==================== Link: https://lore.kernel.org/r/20220818223402.1294091-1-anthony.l.nguyen@intel.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-08-18 (ice) This series contains updates to ice driver only. Jesse and Anatolii add support for controlling FCS/CRC stripping via ethtool. Anirudh allows for 100M speeds on devices which support it. Sylwester removes ucast_shared field and the associated dead code related to it. Mikael removes non-inclusive language from the driver. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: remove non-inclusive language ice: Remove ucast_shared ice: Allow 100M speeds for some devices ice: Implement FCS/CRC and VLAN stripping co-existence policy ice: Implement control of FCS/CRC stripping ==================== Link: https://lore.kernel.org/r/20220818155207.996297-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Vladimir Oltean authored
Since commit 129bd7ca ("net: dsa: Prevent usage of NET_DSA_TAG_8021Q as tagging protocol"), dsa_8021q_netdev_ops no longer exists, so remove the comment that talks about it. Signed-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220818210228.8635-1-wsa+renesas@sang-engineering.comSigned-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220818210216.8419-1-wsa+renesas@sang-engineering.comSigned-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Validate OF nodes for DSA shared ports This is the first set of measures taken so that more drivers can be transitioned towards phylink on shared (CPU and DSA) ports some time in the future. It consists of: - expanding the DT schema for DSA and related drivers to clarify the new requirements. - introducing warnings for drivers that currently skip phylink due to incomplete DT descriptions. - introducing warning for drivers that currently skip phylink due to using platform data (search for struct dsa_chip_data). - closing the possibility for new(ish) drivers to skip phylink, by validating their DT descriptions. - making the code paths used by shared ports more evident. - preparing the code paths used by shared ports for further work to fake a link description where that is possible. More details in patch 10/10. DT binding (patches 1-6) and kernel (7-10) are in principle separable, but are submitted together since they're part of the same story. Patches 8 and 9 are DSA cleanups, and patch 7 is a dependency for patch 10. v1 at https://patchwork.kernel.org/project/netdevbpf/patch/20220723164635.1621911-1-vladimir.oltean@nxp.com/ v2 at https://patchwork.kernel.org/project/netdevbpf/patch/20220729132119.1191227-5-vladimir.oltean@nxp.com/ v3 at https://patchwork.kernel.org/project/netdevbpf/cover/20220806141059.2498226-1-vladimir.oltean@nxp.com/ ==================== Link: https://lore.kernel.org/r/20220818115500.2592578-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
Early DSA drivers were kind of simplistic in that they assumed a fairly narrow hardware layout. User ports would have integrated PHYs at an internal MDIO address that is derivable from the port number, and shared (DSA and CPU) ports would have an MII-style (serial or parallel) connection to another MAC. Phylib and then phylink were used to drive the internal PHYs, and this needed little to no description through the platform data structures. Bringing up the shared ports at the maximum supported link speed was the responsibility of the drivers. As a result of this, when these early drivers were converted from platform data to the new DSA OF bindings, there was no link information translated into the first DT bindings. https://lore.kernel.org/all/YtXFtTsf++AeDm1l@lunn.ch/ Later, phylink was adopted for shared ports as well, and today we have a workaround in place, introduced by commit a20f9970 ("net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed"). There, DSA checks for the presence of phy-handle/fixed-link/managed OF properties, and if missing, phylink registration would be skipped. This is because phylink is optional for some drivers (the shared ports already work without it), but the process of starting to register a port with phylink is irreversible: if phylink_create() fails to find the fwnode properties it needs, it bails out and it leaves the ports inoperational (because phylink expects ports to be initially down, so DSA necessarily takes them down, and doesn't know how to put them back up again). DSA being a common framework, new drivers opt into this workaround willy-nilly, but the ideal behavior from the DSA core's side would have been to not interfere with phylink's process of failing at all. This isn't possible because of regression concerns with pre-phylink DT blobs, but at least DSA should put a stop to the proliferation of more of such cases that rely on the workaround to skip phylink registration, and sanitize the environment that new drivers work in. To that end, create a list of compatible strings for which the workaround is preserved, and don't apply the workaround for any drivers outside that list (this includes new drivers). In some cases, we make the assumption that even existing drivers don't rely on DSA's workaround, and we do this by looking at the device trees in which they appear. We can't fully know what is the situation with downstream DT blobs, but we can guess the overall trend by studying the DT blobs that were submitted upstream. If there are upstream blobs that have lacking descriptions, we take it as very likely that there are many more downstream blobs that do so too. If all upstream blobs have complete descriptions, we take that as a hint that the driver is a candidate for enforcing strict DT bindings (considering that most bindings are copy-pasted). If there are no upstream DT blobs, we take the conservative route of allowing the workaround, unless the driver maintainer instructs us otherwise. The driver situation is as follows: ar9331 ~~~~~~ compatible strings: - qca,ar9331-switch 1 occurrence in mainline device trees, part of SoC dtsi (arch/mips/boot/dts/qca/ar9331.dtsi), description is not problematic. Verdict: opt into strict DT bindings and out of workarounds. b53 ~~~ compatible strings: - brcm,bcm5325 - brcm,bcm53115 - brcm,bcm53125 - brcm,bcm53128 - brcm,bcm5365 - brcm,bcm5389 - brcm,bcm5395 - brcm,bcm5397 - brcm,bcm5398 - brcm,bcm53010-srab - brcm,bcm53011-srab - brcm,bcm53012-srab - brcm,bcm53018-srab - brcm,bcm53019-srab - brcm,bcm5301x-srab - brcm,bcm11360-srab - brcm,bcm58522-srab - brcm,bcm58525-srab - brcm,bcm58535-srab - brcm,bcm58622-srab - brcm,bcm58623-srab - brcm,bcm58625-srab - brcm,bcm88312-srab - brcm,cygnus-srab - brcm,nsp-srab - brcm,omega-srab - brcm,bcm3384-switch - brcm,bcm6328-switch - brcm,bcm6368-switch - brcm,bcm63xx-switch I've found at least these mainline DT blobs with problems: arch/arm/boot/dts/bcm47094-linksys-panamera.dts - lacks phy-mode arch/arm/boot/dts/bcm47189-tenda-ac9.dts - lacks phy-mode and fixed-link arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts - lacks phy-mode and fixed-link arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts arch/arm/boot/dts/bcm953012er.dts arch/arm/boot/dts/bcm4708-netgear-r6250.dts arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts - lacks phy-mode and fixed-link arch/arm/boot/dts/bcm53016-meraki-mr32.dts - lacks phy-mode Verdict: opt into DSA workarounds. bcm_sf2 ~~~~~~~ compatible strings: - brcm,bcm4908-switch - brcm,bcm7445-switch-v4.0 - brcm,bcm7278-switch-v4.0 - brcm,bcm7278-switch-v4.8 A single occurrence in mainline (arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi), part of a SoC dtsi, valid description. Florian Fainelli explains that most of the bcm_sf2 device trees lack a full description for the internal IMP ports. Verdict: opt the BCM4908 into strict DT bindings, and opt the rest into the workarounds. Note that even though BCM4908 has strict DT bindings, it still does not register with phylink on the IMP port due to it implementing ->adjust_link(). hellcreek ~~~~~~~~~ compatible strings: - hirschmann,hellcreek-de1soc-r1 No occurrence in mainline device trees. Kurt Kanzenbach explains that the downstream device trees lacked phy-mode and fixed link, and needed work, but were fixed in the meantime. Verdict: opt into strict DT bindings and out of workarounds. lan9303 ~~~~~~~ compatible strings: - smsc,lan9303-mdio - smsc,lan9303-i2c 1 occurrence in mainline device trees: arch/arm/boot/dts/imx53-kp-hsc.dts - no phy-mode, no fixed-link Verdict: opt out of strict DT bindings and into workarounds. lantiq_gswip ~~~~~~~~~~~~ compatible strings: - lantiq,xrx200-gswip - lantiq,xrx300-gswip - lantiq,xrx330-gswip No occurrences in mainline device trees. Martin Blumenstingl confirms that the downstream OpenWrt device trees lack a proper fixed-link and need work, and that the incomplete description can even be seen in the example from Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt. Verdict: opt out of strict DT bindings and into workarounds. microchip ksz ~~~~~~~~~~~~~ compatible strings: - microchip,ksz8765 - microchip,ksz8794 - microchip,ksz8795 - microchip,ksz8863 - microchip,ksz8873 - microchip,ksz9477 - microchip,ksz9897 - microchip,ksz9893 - microchip,ksz9563 - microchip,ksz8563 - microchip,ksz9567 - microchip,lan9370 - microchip,lan9371 - microchip,lan9372 - microchip,lan9373 - microchip,lan9374 5 occurrences in mainline device trees, all descriptions are valid. But we had a snafu for the ksz8795 and ksz9477 drivers where the phy-mode property would be expected to be located directly under the 'switch' node rather than under a port OF node. It was fixed by commit edecfa98 ("net: dsa: microchip: look for phy-mode in port nodes"). The driver still has compatibility with the old DT blobs. The lan937x support was added later than the above snafu was fixed, and even though it has support for the broken DT blobs by virtue of sharing a common probing function, I'll take it that its DT blobs are correct. Verdict: opt lan937x into strict DT bindings, and the others out. mt7530 ~~~~~~ compatible strings - mediatek,mt7621 - mediatek,mt7530 - mediatek,mt7531 Multiple occurrences in mainline device trees, one is part of an SoC dtsi (arch/mips/boot/dts/ralink/mt7621.dtsi), all descriptions are fine. Verdict: opt into strict DT bindings and out of workarounds. mv88e6060 ~~~~~~~~~ compatible string: - marvell,mv88e6060 no occurrences in mainline, nobody knows anybody who uses it. Verdict: opt out of strict DT bindings and into workarounds. mv88e6xxx ~~~~~~~~~ compatible strings: - marvell,mv88e6085 - marvell,mv88e6190 - marvell,mv88e6250 Device trees that have incomplete descriptions of CPU or DSA ports: arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi - lacks phy-mode arch/arm64/boot/dts/marvell/cn9130-crb.dtsi - lacks phy-mode and fixed-link arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts - lacks phy-mode arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts - lacks phy-mode arch/arm/boot/dts/vf610-zii-spb4.dts - lacks phy-mode arch/arm/boot/dts/vf610-zii-cfu1.dts - lacks phy-mode arch/arm/boot/dts/vf610-zii-dev-rev-c.dts - lacks phy-mode on CPU port, fixed-link on DSA ports arch/arm/boot/dts/vf610-zii-dev-rev-b.dts - lacks phy-mode on CPU port arch/arm/boot/dts/armada-381-netgear-gs110emx.dts - lacks phy-mode arch/arm/boot/dts/vf610-zii-scu4-aib.dts - lacks fixed-link on xgmii DSA ports and/or in-band-status on 2500base-x DSA ports, and phy-mode on CPU port arch/arm/boot/dts/imx6qdl-gw5904.dtsi - lacks phy-mode and fixed-link arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts - lacks phy-mode and fixed-link arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts - lacks phy-mode arch/arm/boot/dts/kirkwood-dir665.dts - lacks phy-mode arch/arm/boot/dts/kirkwood-rd88f6281.dtsi - lacks phy-mode arch/arm/boot/dts/orion5x-netgear-wnr854t.dts - lacks phy-mode and fixed-link arch/arm/boot/dts/armada-388-clearfog.dts - lacks phy-mode arch/arm/boot/dts/armada-xp-linksys-mamba.dts - lacks phy-mode arch/arm/boot/dts/armada-385-linksys.dtsi - lacks phy-mode arch/arm/boot/dts/imx6q-b450v3.dts arch/arm/boot/dts/imx6q-b850v3.dts - has a phy-handle but not a phy-mode? arch/arm/boot/dts/armada-370-rd.dts - lacks phy-mode arch/arm/boot/dts/kirkwood-linksys-viper.dts - lacks phy-mode arch/arm/boot/dts/imx51-zii-rdu1.dts - lacks phy-mode arch/arm/boot/dts/imx51-zii-scu2-mezz.dts - lacks phy-mode arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi - lacks phy-mode arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts - lacks phy-mode and fixed-link Verdict: opt out of strict DT bindings and into workarounds. ocelot ~~~~~~ compatible strings: - mscc,vsc9953-switch - felix (arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi) is a PCI device, has no compatible string 2 occurrences in mainline, both are part of SoC dtsi and complete. Verdict: opt into strict DT bindings and out of workarounds. qca8k ~~~~~ compatible strings: - qca,qca8327 - qca,qca8328 - qca,qca8334 - qca,qca8337 5 occurrences in mainline device trees, none of the descriptions are problematic. Verdict: opt into strict DT bindings and out of workarounds. realtek ~~~~~~~ compatible strings: - realtek,rtl8366rb - realtek,rtl8365mb 2 occurrences in mainline, both descriptions are fine, additionally rtl8365mb.c has a comment "The device tree firmware should also specify the link partner of the extension port - either via a fixed-link or other phy-handle." Verdict: opt into strict DT bindings and out of workarounds. rzn1_a5psw ~~~~~~~~~~ compatible strings: - renesas,rzn1-a5psw One single occurrence, part of SoC dtsi (arch/arm/boot/dts/r9a06g032.dtsi), description is fine. Verdict: opt into strict DT bindings and out of workarounds. sja1105 ~~~~~~~ Driver already validates its port OF nodes in sja1105_parse_ports_node(). Verdict: opt into strict DT bindings and out of workarounds. vsc73xx ~~~~~~~ compatible strings: - vitesse,vsc7385 - vitesse,vsc7388 - vitesse,vsc7395 - vitesse,vsc7398 2 occurrences in mainline device trees, both descriptions are fine. Verdict: opt into strict DT bindings and out of workarounds. xrs700x ~~~~~~~ compatible strings: - arrow,xrs7003e - arrow,xrs7003f - arrow,xrs7004e - arrow,xrs7004f no occurrences in mainline, we don't know. Verdict: opt out of strict DT bindings and into workarounds. Because there is a pattern where newly added switches reuse existing drivers more often than introducing new ones, I've opted for deciding who gets to opt into the workaround based on an OF compatible match table in the DSA core. The alternative would have been to add another boolean property to struct dsa_switch, like configure_vlan_while_not_filtering. But this avoids situations where sometimes driver maintainers obfuscate what goes on by sharing a common probing function, and therefore making new switches inherit old quirks. Side note, we also warn about missing properties for drivers that rely on the workaround. This isn't an indication that we'll break compatibility with those DT blobs any time soon, but is rather done to raise awareness about the change, for future DT blob authors. Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Acked-by: Alvin Šipraga <alsi@bang-olufsen.dk> # realtek Signed-off-by:
-
Vladimir Oltean authored
There is a subset of functions that applies only to shared (DSA and CPU) ports, yet this is difficult to comprehend by looking at their code alone. These are dsa_port_link_register_of(), dsa_port_link_unregister_of(), and the functions that only these 2 call. Rename this class of functions to dsa_shared_port_* to make this fact more evident, even if this goes against the apparent convention that function names in port.c must start with dsa_port_. Signed-off-by:
-
Vladimir Oltean authored
dsa_port_link_register_of() and dsa_port_link_unregister_of() are not written with the fact in mind that they can be called with a dp->dn that is NULL (as evidenced even by the _of suffix in their name), but this is exactly what happens. How this behaves will differ depending on whether the backing driver implements ->adjust_link() or not. If it doesn't, the "if (of_phy_is_fixed_link(dp->dn) || phy_np)" condition will return false, and dsa_port_link_register_of() will do nothing and return 0. If the driver does implement ->adjust_link(), the "if (of_phy_is_fixed_link(dp->dn))" condition will return false (dp->dn is NULL) and we will call dsa_port_setup_phy_of(). This will call dsa_port_get_phy_device(), which will also return NULL, and we will also do nothing and return 0. It is hard to maintain this code and make future changes to it in this state, so just suppress calls to these 2 functions if dp->dn is NULL. The only functional effect is that if the driver does implement ->adjust_link(), we'll stop printing this to the console: Using legacy PHYLIB callbacks. Please migrate to PHYLINK! but instead we'll always print: [ 8.539848] dsa-loop fixed-0:1f: skipping link registration for CPU port 5 This is for the better anyway, since "using legacy phylib callbacks" was misleading information - we weren't issuing _any_ callbacks due to dsa_port_get_phy_device() returning NULL. Signed-off-by:
-
Vladimir Oltean authored
Modules such as net/dsa/dsa_core.ko might want to iterate through an array of compatible strings for things such as validation (or rather, skipping it for some potentially broken drivers). of_device_is_compatible() is exported, by of_device_compatible_match() isn't. Export the latter as well, so we don't have to open-code the iteration. Cc: Frank Rowand <frowand.list@gmail.com> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
