- 01 Sep, 2017 29 commits
-
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2017-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.14 Few last patches for 4.14, nothing really major here. Major changes: wil6210 * support FW RSSI reporting (by mistake this was accidentally mentioned already in the previous pull request, but now it's really included) * make debugfs optional, adds new Kconfig option CONFIG_WIL6210_DEBUGFS qtnfmac * implement 64-bit DMA support ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
At the end of the do while loop the integer counter retries will always be zero and so the subsequent check to see if it is zero is always true and therefore redundant. Remove the redundant check and always return -EIO on this return path. Also unbreak the literal string in dev_err message to clean up a checkpatch warning. Detected by CoverityScan, CID#744279 ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Corentin Labbe says: ==================== net: mdio-mux: Misc fix This patch series fix minor problems found when working on the dwmac-sun8i syscon mdio-mux. Changes since v1: - Removed obsolete comment about of_mdio_find_bus/put_device - removed more DRV_VERSION ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Corentin Labbe authored
mdio_mux_uninit() call put_device (unconditionally) because of of_mdio_find_bus() in mdio_mux_init. But of_mdio_find_bus is only called if mux_bus is empty. If mux_bus is set, mdio_mux_uninit will print a "refcount_t: underflow" trace. This patch add a get_device in the other branch of "if (mux_bus)". Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Corentin Labbe authored
This patch fix an old information that mdio-mux-mmioreg can only handle 8bit registers. This is not true anymore. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Corentin Labbe authored
Remove the driver version information because this information is not useful in an upstream kernel driver. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Corentin Labbe authored
This patch fix checkpatch warning about unnecessary 'out of memory' message. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Corentin Labbe authored
This patch fix checkpatch warning about NULL Comparison style. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Antoine Tenart says: ==================== net: mvpp2: optional PHYs and GoP link irq This series aims at making the driver work when no PHY is connected between a port and the physical layer and not described as a fixed-phy. This is useful for some usecases such as when a switch is connected directly to the serdes lanes. It can also be used for SFP ports on the 7k-db and 8k-db while waiting for the phylink support to land in (which should be part of another series). This series makes the phy optional in the PPv2 driver, and then adds the support for the GoP port link interrupt to handle link status changes on such ports. This was tested using the SFP ports on the 7k-db and 8k-db boards. Since v1: - Now use phy_interface_mode_is_rgmii() in the GoP link patch. - Added one cosmetic patch to take advantage of phy_interface_mode_is_rgmii() in the whole PPv2 driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
A link interrupt can be described. Document this valid interrupt name. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
This patch adds the GoP link interrupt support for when a port isn't connected to a PHY. Because of this the phylib callback is never called and the link status management isn't done. This patch use the GoP link interrupt in such cases to still have a minimal link management. Without this patch ports not connected to a PHY cannot work. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
There is not necessarily a PHY between the GoP and the physical port. However, the driver currently makes the "phy" property mandatory, contrary to what is stated in the device tree bindings. This patch makes the PHY optional, and aligns the PPv2 driver on its device tree documentation. However if a PHY is provided, the GoP link interrupt won't be used. With this patch switches directly connected to the serdes lanes and SFP ports on the Armada 8040-db and Armada 7040-db can be used if the link interrupt is described in the device tree. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
Convert all RGMII checks to use the phy_interface_mode_is_rgmii() helper. This is a cosmetic patch. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: spectrum_router: Couple of fixes Ido Schimmel (2): mlxsw: spectrum_router: Trap packets hitting anycast routes mlxsw: spectrum_router: Set abort trap in all virtual routers ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
When the abort mechanism is invoked a default route directing packets to the CPU is programmed in all the virtual routers currently in use. This can result in packet loss in case a new VRF is configured. Upon abort, program the default route in all virtual routers, whether they are in use or not. The patch is directed at net-next since post-abort fixes aren't critical and packet loss due to a missing default route will be insignificant compared to packet loss caused by the CPU port policer. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
I relied on the fact that anycast routes use the loopback device as their nexthop device to trap packets hitting them to the CPU. After commit 4832c30d ("net: ipv6: put host and anycast routes on device with address") this is no longer the case and such routes are programmed with a forward action (note the 'offload' flag): anycast cafe:: dev enp3s0np7 proto kernel metric 0 offload pref medium This will prevent the router from locally receiving packets destined to the Subnet-Router anycast address. Fix this by specifically programming anycast routes with action trap, which results in the following output: anycast cafe:: dev enp3s0np7 proto kernel metric 0 pref medium Fixes: 4832c30d ("net: ipv6: put host and anycast routes on device with address") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Martin KaFai Lau says: ==================== bpf: Improve LRU map lookup performance This patchset improves the lookup performance of the LRU map. Please see individual patch for details. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
This patch writes 'node->ref = 1' only if node->ref is 0. The number of lookups/s for a ~1M entries LRU map increased by ~30% (260097 to 343313). Other writes on 'node->ref = 0' is not changed. In those cases, the same cache line has to be changed anyway. First column: Size of the LRU hash Second column: Number of lookups/s Before: > echo "$((2**20+1)): $(./map_perf_test 1024 1 $((2**20+1)) 10000000 | awk '{print $3}')" 1048577: 260097 After: > echo "$((2**20+1)): $(./map_perf_test 1024 1 $((2**20+1)) 10000000 | awk '{print $3}')" 1048577: 343313 Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
Inline the lru map lookup to save the cost in making calls to bpf_map_lookup_elem() and htab_lru_map_lookup_elem(). Different LRU hash size is tested. The benefit diminishes when the cache miss starts to dominate in the bigger LRU hash. Considering the change is simple, it is still worth to optimize. First column: Size of the LRU hash Second column: Number of lookups/s Before: > for i in $(seq 9 20); do echo "$((2**i+1)): $(./map_perf_test 1024 1 $((2**i+1)) 10000000 | awk '{print $3}')"; done 513: 1132020 1025: 1056826 2049: 1007024 4097: 853298 8193: 742723 16385: 712600 32769: 688142 65537: 677028 131073: 619437 262145: 498770 524289: 316695 1048577: 260038 After: > for i in $(seq 9 20); do echo "$((2**i+1)): $(./map_perf_test 1024 1 $((2**i+1)) 10000000 | awk '{print $3}')"; done 513: 1221851 1025: 1144695 2049: 1049902 4097: 884460 8193: 773731 16385: 729673 32769: 721989 65537: 715530 131073: 671665 262145: 516987 524289: 321125 1048577: 260048 Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
Create a new case to test the LRU lookup performance. At the beginning, the LRU map is fully loaded (i.e. the number of keys is equal to map->max_entries). The lookup is done through key 0 to num_map_entries and then repeats from 0 again. This patch also creates an anonymous struct to properly name the test params in stress_lru_hmap_alloc() in map_perf_test_kern.c. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-nextDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2017-09-01 This should be the last ipsec-next pull request for this release cycle: 1) Support netdevice ESP trailer removal when decryption is offloaded. From Yossi Kuperman. 2) Fix overwritten return value of copy_sec_ctx(). Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
David Ahern says: ==================== bpf: Add option to set mark and priority in cgroup sock programs Add option to set mark and priority in addition to bound device for newly created sockets. Also, allow the bpf programs to use the get_current_uid_gid helper meaning socket marks, priority and device can be set based on the uid/gid of the running process. Sample programs are updated to demonstrate the new options. v3 - no changes to Patches 1 and 2 which Alexei acked in previous versions - dropped change related to recursive programs in a cgroup - updated tests per dropped patch v2 - added flag to control recursive behavior as requested by Alexei - added comment to sock_filter_func_proto regarding use of get_current_uid_gid helper - updated test programs for recursive option ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Update cgrp2 bpf sock tests to check that device, mark and priority can all be set on a socket via bpf programs attached to a cgroup. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Add option to dump socket settings. Will be used in the next patch to verify bpf programs are correctly setting mark, priority and device based on the cgroup attachment for the program run. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Add option to detach programs from a cgroup. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Update sock test to set mark and priority on socket create. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Allow BPF programs run on sock create to use the get_current_uid_gid helper. IPv4 and IPv6 sockets are created in a process context so there is always a valid uid/gid Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Add socket mark and priority to fields that can be set by ebpf program when a socket is created. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 31 Aug, 2017 11 commits
-
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Add IPv6 host dpipe table This patchset adds IPv6 host dpipe table support. This will provide the ability to observe the hardware offloaded IPv6 neighbors. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
Add support for controlling IPv6 neighbor counters via dpipe. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
Add support for setting counters on IPv6 neighbors based on dpipe's host6 table counter status. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
Add support for IPv6 host table dump. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
Change the host entry filler helper to be applicable for both IPv4/6 addresses. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
Add helper for accessing destination IP in case of IPv6 neighbor. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
Add IPv6 host table initial support. The action behavior for both IPv4/6 tables is the same, thus the same action dump op is used. Neighbors with link local address are ignored. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
Neighbors with link local addresses are not offloaded to the host table, yet, the are maintained in the driver for adjacency table usage. When dumping the IPv6 host neighbors this link local neighbors should be ignored. This patch exports this helper for dpipe usage. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
This will be used by the IPv6 host table which will be introduced in the following patches. The fields in the header are added per-use. This header is global and can be reused by many drivers. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Saves 4 bytes replacing following instructions : lea rax, [rsi + rdx * 8 + offsetof(...)] mov rax, qword ptr [rax] cmp rax, 0 by : mov rax, [rsi + rdx * 8 + offsetof(...)] test rax, rax Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tariq Toukan authored
Fix compilation error below: $ make samples/bpf/ LLVM ERROR: 'xdp_redirect_dummy' label emitted multiple times to assembly file make[1]: *** [samples/bpf/xdp_redirect_kern.o] Error 1 make: *** [samples/bpf/] Error 2 Fixes: 306da4e6 ("samples/bpf: xdp_redirect load XDP dummy prog on TX device") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-