into maxwell.earthlink.net:/tmp/linus-2.5

into maxwell.earthlink.net:/tmp/linus-2.5

So the fix for our problems is:

 a) in fs/namei.c replace d_unhash() with a safe version.
 b) in fs/nfs/dir.c replace d_drop(dentry) in beginning of nfs_unlink()
 with list_del_init(&dentry->d_hash);

Ugh.  nfs_unlink() is actually racy as hell - look what happens if
we enter it with ->d_count == 1, see that nfs_sillyrename() doesn't
need to do anything and call nfs_safe_remove().  In the meanwhile
somebody does dcache lookup (without going into NFS code - plain
and simple cache hit) and increments ->d_count.  nfs_safe_remove()
decides that something is very rotten and fails.

AFAICS we should take the test for ->d_count + d_drop if it's 1
under dcache_lock (and in one place).  Comments?

Proposed fix follows:
	* dget/dput killed in vfs_unlink() (safely)
	* nfs_unlink() starts with check for ->d_count (under dcache_lock)
	* if it's > 1 - sillyrename
	* if it is 1 - immediately unhash, then drop dcache_lock.
		after that we do as in old variant, except that
		rehashing is done in nfs_unlink() and only if there
		was an error - if there was none we simply leave
		d_delete() to vfs_unlink().

confused the NFS client code wrt the exclusiveness of
a dentry getting removed.

One more doc correction while we are at it...

i've done a minor comment update in softirq.c, plus i've written a
cli-sti-removal.txt guide to help driver writers do the transition.

The serial layer is restructured to allow less code duplication (and
hence bug duplication) across various serial drivers.  Since ARM adds
six extra serial drivers, maintaining six copies of serial.c was not
my idea of fun.

Therefore, we've ended up with a core serial driver, which knows about
the interactions with the tty layer, and low-level hardware drivers,
which know all about the hardware.  The interface between the two is
described in "Documentation/serial/driver".

This patch completely removes the old serial.c driver and its associated
configuration options, as you requested at KS2002.  We keep a certain
amount of configuration compatibility with the per-architecture serial.h
file for the moment; this *will* be killed in the next round of patches.
The biggest user of this is x86, and since I don't have an x86 box to
test this stuff on, I think the changes are best kept separate.

This is a massive cleanup of the IRQ subsystem.  It's losely based on
Linus' original idea and DaveM's original implementation, to fold our
various irq, softirq and bh counters into the preemption counter.

with this approach it was possible:

 - to remove the 'big IRQ lock' on SMP - on which sti() and cli() relied.

 - to streamline/simplify arch/i386/kernel/irq.c significantly.

 - to simplify the softirq code.

 - to remove the preemption count increase/decrease code from the lowlevel
   IRQ assembly code.

 - to speed up schedule() a bit.

Global sti() and cli() is gone forever on SMP, there is no more globally
synchronizing irq-disabling capability.  All code that relied on sti()
and cli() and restore_flags() must use other locking mechanisms from now
on (spinlocks and __cli()/__sti()).

obviously this patch breaks massive amounts of code, so only limited
.configs are working at the moment (UP is expected to be unaffected, but
SMP will require various driver updates).

The patch was developed and tested on SMP systems, and while the code is
still a bit rough in places, the base IRQ code appears to be pretty
robust and clean.

while it boots already so the worst is over, there is lots of work left:
eg. to fix the serial layer to not use cli()/sti() and bhs ...

In the /proc/fs/jffs/* code we switch to passing number of mtd device
(as an integer) instead of messing with kdev_t (which would always be
mk_kdev(MTD_BLOCK_MAJOR, device_number) anyway).

Removed prototypes of several functions that do not exist...

->bios_param() switched from kdev_t to struct block_device *.

Caller and all instances updated.

somewhat related to the above - drivers/block/paride/* switched to
module_init()/module_exit(), pd.c taught to use LBA if disks support
it (needed for paride disks >8Gb; change is fairly trivial and I've
got 40Gb one ;-)

blk_ioctl() not exported anymore; calls moved from drivers to block_dev.c.

Horrors with open/reread_partition exclusion are starting to get fixed.

It's not the final variant, but at least we are getting the logics into
one place; switch to final variant will happen once we get per-disk
analog of gendisks.  New fields - ->bd_part_sem and ->bd_part_count.

The latter counts the amount of opened partitions.  The former protects
said count _and_ is held while we are rereading partition tables.
Helpers - dev_part_lock()/dev_part_unlock() (currently taking kdev_t; that
will change pretty soon).  No more ->open() and ->release() for partitions,
all that logics went to generic code.  Lock hierachy is currently messy:

  ->bd_sem for partitions -> ->bd_part_sem -> ->bd_sem for entire disks

Ugly, but that'll go away and to get the final variant of locking right
now would take _really_ big patch - with a lot of steps glued together.
The damn thing is large as it is...

for partitioned devices we use ->nr_sect to find the size; blk_size[] is
still used for things like floppy.c, etc.; that will go away later.

There was only one place (do_open()) that needed it - the rest uses
->bd_inode->i_size now.  So blkdev_size_in_bytes() is gone - it's
expanded in its only caller.  Same place (do_open()) finds the partition
offset and stores it in new field ->bd_offset.  As the result, call of
get_gendisk() is gone from the IO path - in blk_partition_remap() we
just add ->bd_offset.

Additionally, we take driver probing (get_blkfops()) outside of ->bd_sem
(again, do_open()) - that will allow to kill ad-hackery in check_partitions()
(opening bdev by hand).

struct gendisk and partition parsers divorced; all these parsers (IBM style,
disklabel, etc.) just fill the structure they get from check_partitions().

Actual setting the things up (filling hd_struct arrays, telling RAID that
we had found partitions worth a look, etc.) is taken into check_partitions()
and done only when we are done with parsing.  Parsers don't know (or care)
what majors/minors they are dealing with; that knowledge also went to
check_partitions().

a bunch of places doing invalidate_device() either didn't need it at all
or actually wanted wipe_partitions().  Switched.

unrelated to the rest, replaces home-grown (racy) semaphores in fs/hfs
with the real thing.

We should _not_ update the current LDT if it's not the current
MM that we are tearing down.

it unconditional for now.

into home.transmeta.com:/home/torvalds/v2.5/linux

This can be overridden by editing the .config file if you really want it.

into home.transmeta.com:/home/torvalds/v2.5/linux

This includes the security_* functions, and the default and capability
modules.

This is needed due to the next header file changes.

This patch changes cont_prepare_write(), in order to support a 4G-1
file for FAT32.

 int cont_prepare_write(struct page *page, unsigned offset,
-		unsigned to, get_block_t *get_block, unsigned long *bytes)
+		unsigned to, get_block_t *get_block, loff_t *bytes)

And it fixes broken adfs/affs/fat/hfs/hpfs/qnx4 by this
cont_prepare_write() change.

into home.transmeta.com:/home/torvalds/v2.5/linux

Been looking at a workload which involves several processes which seek
around and read from a large file.  There are a few problems:
generic_file_lseek is bouncing i_sem around like mad, and readahead is
doing lots of pointless pagecache probing.

This patch addresses readahead.

Presumably the change will be larger on machines which have higher
bandwidth memory than my test box, of which there are many.

This patch teaches readahead to detect the situation where no IO is
actually being performed as a result of its actions.  Now, we don't
want to sacrifice IO efficiency to save a bit of CPU, so the code is
very cautious.  But eventually, after some tens of consecutive
readahead attempts were found to perform no I/O at all, readahead will
turn itself off.

readahead will be turned on again when either generic_file_read() or
filemap_nopage() get a pagecache miss.  The function
handle_ra_thrashing() has been renamed to handle_ra_miss() to reflect
its widened role.

A performance bug in page_cache_readround() was fixed - if
ra->next_size is zero, that function needs to leave it well alone,
because next_size==0 is a magic value meaning that the file has just
been opened and that readahead needs to get aggressive.  This change
makes a `make dep' run at the same speed as in the 2.4 kernel.  It used
to take 4x as long...

`make dep' is an interesting test because it uses mmap to read the files.

The kernel has a number of problems wrt heavy write traffic to multiple
spindles.  What keeps on happening is that all processes which are
responsible for writeback get blocked on one of the queues and all the
others fall idle.

This happens in the balance_dirty_pages() path (balance_dirty() in 2.4)
and in the page reclaim code, when a dirty page is found on the LRU.

The latter is particularly bad because it causes "innocent" processes
to be suspended for long periods due to the activity of heavy writers.

The general idea is: the primary resource for writeback should be the
process which is dirtying memory.  The secondary resource is the
pdflush pool (although this is mainly for providing async writeback in
the presence of light-moderate loads).  Add the final
oh-gee-we-screwed-up resource for writeback is a caller to
shrink_cache().

This patch addresses the balance_dirty_pages() path.  This code was
initially modelled on the 2.4 writeback scheme: throttled processes
writeback all data regardless of its queue.  Instead, the patch changes
it so that the balance_dirty_pages() caller only writes back pages
which are dirty against the queue which that caller just dirtied.

So the effect is a better allocation of writeback resources across the
queues and increased parallelism.

The per-queue writeback is implemented by using
mapping->backing_dev_info as a search key during the walk across the
superblocks and inodes.

The patch also fixes an initialisation problem in
block_dev.c:do_open(): it was setting up the blockdev's
mapping->backing_dev_info too early, before the queue has been
identified.

Generally, this patch doesn't help much, because of the stalls in the
page allocator.  I have a patch which mostly fixes that up, and taken
together the kernel is achieving almost platter speed against six
spindles, but only when the system has a small amount of memory.  More
work is needed there.

A tasty patch from Hugh Dickens.  radix_tree_insert() fails if something
was already present at the target index, so that error can be
propagated back through add_to_page_cache().  Hence
add_to_page_cache_unique() is obsolete.

Hugh's patch removes add_to_page_cache_unique() and cleans up a bunch of
stuff.

Some cleanup from the surprise direct-to-bio for O_DIRECT merge.

- Remove bits and pieces from the kiobuf implementation

- Replace the waitqueue in struct dio with just a task_struct pointer
  and use wake_up_process.  (Ben).

- Only take mmap_sem around the individual calls to get_user_pages().
   (It pins the vmas, yes?)

- Remove some debug code.

- Fix JFS.

Cleanup patch from Martin Bligh: convert some loops which want to be
`for' loops into that, and add some commentary.

generic_writepages() is just a wrapper around mpage_writepages(), so
inline it.