- 10 Sep, 2012 14 commits
-
-
Toshiaki Yamane authored
fixed below checkpatch warnings. -WARNING: braces {} are not necessary for single statement blocks -WARNING: braces {} are not necessary for any arm of this statement Signed-off-by:Toshiaki Yamane <yamanetoshi@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Toshiaki Yamane authored
fixed below checkpatch warnings. -WARNING: braces {} are not necessary for single statement blocks Signed-off-by: -
Toshiaki Yamane authored
fixed below checkpatch warnings. -WARNING: braces {} are not necessary for single statement blocks Signed-off-by: -
Toshiaki Yamane authored
fixed below checkpatch warnings. -WARNING: braces {} are not necessary for any arm of this statement Signed-off-by: -
Toshiaki Yamane authored
fixed below checkpatch warnings. -WARNING: braces {} are not necessary for any arm of this statement Signed-off-by: -
Toshiaki Yamane authored
fixed below checkpatch warnings. -WARNING: braces {} are not necessary for single statement blocks -WARNING: braces {} are not necessary for any arm of this statement Signed-off-by: -
Toshiaki Yamane authored
fixed below checkpatch warnings. -WARNING: braces {} are not necessary for single statement blocks -WARNING: braces {} are not necessary for any arm of this statement Signed-off-by: -
Toshiaki Yamane authored
fixed below checkpatch warnings. -WARNING: braces {} are not necessary for single statement blocks Signed-off-by: -
Toshiaki Yamane authored
fixed below checkpatch warnings. -WARNING: braces {} are not necessary for single statement blocks Signed-off-by: -
Toshiaki Yamane authored
fixed below checkpatch warnings. -WARNING: braces {} are not necessary for single statement blocks -WARNING: braces {} are not necessary for any arm of this statement Signed-off-by: -
Fengguang Wu authored
Use spin_lock_irq() to quiet warning: [ 8.232324] BUG: spinlock trylock failure on UP on CPU#0, reboot/85 [ 8.234138] lock: c161c760, .magic: dead4ead, .owner: reboot/85, .owner_cpu: 0 [ 8.236132] Pid: 85, comm: reboot Not tainted 3.4.0-rc7-00656-g82163edc #5 [ 8.237965] Call Trace: [ 8.238648] [<c13dfd20>] ? printk+0x18/0x1a [ 8.239827] [<c122a5e0>] spin_dump+0x80/0xd0 [ 8.241016] [<c122a652>] spin_bug+0x22/0x30 [ 8.242181] [<c122a93b>] do_raw_spin_trylock+0x5b/0x70 [ 8.243611] [<c13e8bae>] _raw_spin_trylock+0xe/0x60 [ 8.244975] [<c1392230>] ? keypad_send_key.constprop.9+0xe0/0xe0 ==> [ 8.246638] [<c13922ea>] panel_scan_timer+0xba/0x570 [ 8.248019] [<c1392230>] ? keypad_send_key.constprop.9+0xe0/0xe0 [ 8.249689] [<c102f6f5>] run_timer_softirq+0x1e5/0x370 [ 8.251191] [<c102f645>] ? run_timer_softirq+0x135/0x370 [ 8.252718] [<c1392230>] ? keypad_send_key.constprop.9+0xe0/0xe0 [ 8.254462] [<c102a592>] __do_softirq+0xc2/0x1c0 [ 8.255758] [<c102a4d0>] ? local_bh_enable_ip+0x130/0x130 [ 8.257228] <IRQ> [<c102a855>] ? irq_exit+0x65/0x70 [ 8.258647] [<c1013ff9>] ? smp_apic_timer_interrupt+0x49/0x80 [ 8.260226] [<c13e96c1>] ? apic_timer_interrupt+0x31/0x38 [ 8.261737] [<c12700e0>] ? drm_vm_open_locked+0x70/0xb0 [ 8.263166] [<c122489a>] ? delay_tsc+0x1a/0x30 [ 8.264452] [<c12248c9>] ? __delay+0x9/0x10 [ 8.265621] [<c12248ec>] ? __const_udelay+0x1c/0x20 ==> [ 8.266967] [<c139136c>] ? lcd_clear_fast_p8+0x9c/0xe0 [ 8.268386] [<c1391a66>] ? lcd_write+0x226/0x810 [ 8.269653] [<c1367900>] ? md_set_readonly+0xc0/0xc0 [ 8.271013] [<c122a9ed>] ? do_raw_spin_unlock+0x9d/0xe0 [ 8.272470] [<c1392a98>] ? panel_lcd_print+0x38/0x40 [ 8.273837] [<c1392ace>] ? panel_notify_sys+0x2e/0x60 [ 8.275224] [<c1046634>] ? notifier_call_chain+0x84/0xb0 [ 8.276754] [<c10469ce>] ? __blocking_notifier_call_chain+0x3e/0x60 [ 8.278576] [<c1046a0a>] ? blocking_notifier_call_chain+0x1a/0x20 [ 8.280267] [<c1036a14>] ? kernel_restart_prepare+0x14/0x40 [ 8.281901] [<c1036a8e>] ? kernel_restart+0xe/0x50 [ 8.283216] [<c1036ce9>] ? sys_reboot+0x149/0x1e0 [ 8.284532] [<c10b3fb3>] ? handle_pte_fault+0x93/0xd70 [ 8.285956] [<c1019e35>] ? do_page_fault+0x215/0x5e0 [ 8.287330] [<c101a113>] ? do_page_fault+0x4f3/0x5e0 [ 8.288704] [<c1045ac6>] ? up_read+0x16/0x30 [ 8.289890] [<c101a113>] ? do_page_fault+0x4f3/0x5e0 [ 8.291252] [<c10d4486>] ? iterate_supers+0x86/0xd0 [ 8.292615] [<c122a9ed>] ? do_raw_spin_unlock+0x9d/0xe0 [ 8.294049] [<c13e8dcd>] ? _raw_spin_unlock+0x1d/0x20 [ 8.295449] [<c10d44ab>] ? iterate_supers+0xab/0xd0 [ 8.296795] [<c10fb620>] ? __sync_filesystem+0xa0/0xa0 [ 8.298199] [<c13e9b03>] ? sysenter_do_call+0x12/0x37 [ 8.306899] Restarting system. [ 8.307747] machine restart Signed-off-by:Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Randy Dunlap authored
Fix build errors in ccg when CONFIG_NET is not enabled by adding "depends on NET": ERROR: "netif_carrier_on" [drivers/staging/ccg/g_ccg.ko] undefined! ERROR: "netif_carrier_off" [drivers/staging/ccg/g_ccg.ko] undefined! ERROR: "skb_realloc_headroom" [drivers/staging/ccg/g_ccg.ko] undefined! ERROR: "skb_trim" [drivers/staging/ccg/g_ccg.ko] undefined! ERROR: "netif_rx" [drivers/staging/ccg/g_ccg.ko] undefined! ERROR: "ethtool_op_get_link" [drivers/staging/ccg/g_ccg.ko] undefined! ERROR: "free_netdev" [drivers/staging/ccg/g_ccg.ko] undefined! ERROR: "register_netdev" [drivers/staging/ccg/g_ccg.ko] undefined! ERROR: "skb_push" [drivers/staging/ccg/g_ccg.ko] undefined! ERROR: "skb_pull" [drivers/staging/ccg/g_ccg.ko] undefined! ERROR: "dev_kfree_skb_any" [drivers/staging/ccg/g_ccg.ko] undefined! ERROR: "skb_queue_tail" [drivers/staging/ccg/g_ccg.ko] undefined! ERROR: "__alloc_skb" [drivers/staging/ccg/g_ccg.ko] undefined! ERROR: "eth_type_trans" [drivers/staging/ccg/g_ccg.ko] undefined! ERROR: "eth_validate_addr" [drivers/staging/ccg/g_ccg.ko] undefined! ERROR: "skb_dequeue" [drivers/staging/ccg/g_ccg.ko] undefined! ERROR: "unregister_netdev" [drivers/staging/ccg/g_ccg.ko] undefined! ERROR: "__netif_schedule" [drivers/staging/ccg/g_ccg.ko] undefined! ERROR: "skb_put" [drivers/staging/ccg/g_ccg.ko] undefined! ERROR: "eth_mac_addr" [drivers/staging/ccg/g_ccg.ko] undefined! ERROR: "dev_get_stats" [drivers/staging/ccg/g_ccg.ko] undefined! ERROR: "alloc_etherdev_mqs" [drivers/staging/ccg/g_ccg.ko] undefined! Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: Mike Lockwood <lockwood@android.com> Signed-off-by:
-
DanielC authored
Staging: silicom: Force depend on module until monolithic build fixed Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Daniel Cotey <puff65537@bansheeslibrary.com> Signed-off-by:
-
Stephen Hemminger authored
Make some variables const: 1. bus oerations table 2. driver name 3. tpci control register table Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
- 08 Sep, 2012 26 commits
-
-
DanielC authored
Signed-off-by:
-
DanielC authored
Signed-off-by:
-
DanielC authored
Signed-off-by:
-
DanielC authored
The Silicom Bypass Network Interface Cards (NICs) are network cards with paired ports (2 or 4). The pairs either act as a "wire" allowing the network packets to pass or insert the device in between the two ports. When paired with the on-board hardware watchdog or other failsafe, they provide high availability for the network in the face of software outages or maintenance. Signed-off-by:
-
Devendra Naga authored
this is because it doesn't fail anywhere and returning a value from it will be completely unnecesary. Signed-off-by:
Devendra Naga <devendra.aaru@gmail.com> Signed-off-by:
-
Devendra Naga authored
when alloc_etherdev fails we should be returning ENOMEM, not ENODEV Signed-off-by:
-
Devendra Naga authored
we are using spaces at the beginning of the line, we should use tabs instead Signed-off-by:
-
Devendra Naga authored
a) put the device_get_options functions' opening brace below b) replace spaces with tabs Signed-off-by:
Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by:
-
Devendra Naga authored
a) replace spaces with tabs b) put the opening brace of get_chip_name below it Signed-off-by:
-
Dan Magenheimer authored
Fix build warnings resulting from in-progress work that was not entirely ifdef'd out. Signed-off-by:
Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by:
-
Stephen Hemminger authored
PCI probe routines have to be named _probe to avoid section mismatch warning. Found when doing 'make allmodconfig' Signed-off-by:
-
Wei Yongjun authored
The dereference should be moved below the NULL test. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
H Hartley Sweeten authored
A lot of the messages produced by this driver are just noise and need to be removed. For now just convert them all to dev_printk's. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
H Hartley Sweeten authored
Move the remaining defines in this header to the c file. Nothing in the header is needed by any other file. While moving the defines, reorder them so that the bit defines are associated with the register they go with. Also, convert the bit defines to bit shifts to make them a bit clearer. Signed-off-by:
-
H Hartley Sweeten authored
Move the struct me4000_info definition from the header to the c file. This struct is not used by any other file. Signed-off-by:
-
H Hartley Sweeten authored
Since this driver is using the 8253.h helpers, these defines are no longer needed. Signed-off-by:
-
H Hartley Sweeten authored
Absorb the cnt_reset and cnt_config helper functions. They are now both just single line routines. Remove the printk noise about "Invalid instruction length". Fix the return value, the value should be the number of data values used to perform the instruction. The GPCT_RESET instruction only has one parameter. Signed-off-by:
-
H Hartley Sweeten authored
The counter subdevice of this board is a standard 8254 compatible counter/timer. Instead of open-coding the 8254 timer io, use the helper functions provided by 8253.h. Signed-off-by:
-
H Hartley Sweeten authored
Rename reset_board() to me4000_reset() so it has namespace associated with this driver. Change it's return type to void, it always succeeds. Signed-off-by:
-
H Hartley Sweeten authored
Only set the dev->irq when the request_irq is successful. Use the dev->board_name for the name passed to request_irq. Change the printk messages into dev_warn(). Make sure free_irq is called in the detach. Signed-off-by:
-
H Hartley Sweeten authored
Combine the sanity checks for valid io addresses into one if(). Signed-off-by:
-
H Hartley Sweeten authored
The program_regbase variable in the private data is only used when the board is first attached. This variable holds the pci base address used to read/write the xilinx part to upload the firmware. Use a local variable in the xilinx_download() function to hold this address and remove program_regbase from the private data. Signed-off-by:
-
H Hartley Sweeten authored
Convert this PCI driver to use the comedi PCI auto config attach mechanism by adding an 'attach_pci' callback function. Since the driver does not require any external configuration options, and the legacy 'attach' callback is now optional, remove it. Signed-off-by:
-
H Hartley Sweeten authored
Move the non pci probe related code out of the me4000_probe function and back into the me4000_attach function in preparation of converting this driver to the 'attach_pci' callback. Signed-off-by:
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by:
-
H Hartley Sweeten authored
Move some of the functions to avoid the need for the forward declarations. Signed-off-by:
-
