- 11 Jan, 2016 40 commits
-
-
Mauro Carvalho Chehab authored
Drivers should check if interfaces and interface links were created. Add a must_check for them. Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
If media controller is enabled and mdev is filled, it should ensure that the media graph will be properly initialized. Enforce that. Acked-by:
-
Mauro Carvalho Chehab authored
Interface links are normally enabled, meaning that the interfaces are bound to the entities. So, any ioctl send to the interface are reflected at the entities managed by the interface. However, when a device is used, other interfaces for the same hardware could be decoupled from the entities linked to them, because the hardware may have some parts busy. That's for example, what happens when an hybrid TV device is in use. If it is streaming analog TV or capturing signals from S-Video/Composite connectors, typically the digital part of the hardware can't be used and vice-versa. This is generally due to some internal hardware or firmware limitation, that it is not easily mapped via data pipelines. What the Kernel drivers do internally is that they decouple the hardware from the interface. So, all changes, if allowed, are done only at some interface cache, but not physically changed at the hardware. The usage is similar to the usage of the MEDIA_LNK_FL_ENABLED on data links. So, let's use the same flag to indicate if either the interface to entity link is bound/enabled or not. Acked-by:
-
Mauro Carvalho Chehab authored
Due to the graph traversal algorithm currently in usage, we need a copy of all data links. Those backlinks should not be send to userspace, as otherwise, all links there will be duplicated. Acked-by:
-
Mauro Carvalho Chehab authored
Now that connectors are entities, we need to represent the connector links. Signed-off-by: -
Mauro Carvalho Chehab authored
Depending on the input, an au0828 may have a different number of connectors. add entities to represent them. Signed-off-by: -
Mauro Carvalho Chehab authored
Add entities to represent the connectors that exists inside a hybrid TV device. Acked-by:
-
Mauro Carvalho Chehab authored
Only a few structs are documented on kernel-doc-nano format (the ones added by the MC next gen patches). Add a documentation for all structs, and ensure that they'll be producing the documentation at the Kernel's device driver DocBook. Acked-by:
-
Mauro Carvalho Chehab authored
V4L2 device (and subdevice) nodes should create an interface, if the Media Controller support is enabled. Please notice that radio devices should not create an entity, as radio input/output is either via wires or via ALSA. Acked-by:
-
Mauro Carvalho Chehab authored
Right now, if something gets wrong at dvb_create_media_entity() or at dvb_create_media_graph(), the device will still be registered. Change the logic to properly handle it and free all media graph objects if something goes wrong at dvb_register_device(). Also, change the logic at dvb_create_media_graph() to return an error code if something goes wrong. It is up to the caller to implement the right logic and to call dvb_unregister_device() to unregister the already-created objects. While here, add a missing logic to unregister the created interfaces. Acked-by:
-
Mauro Carvalho Chehab authored
The logic is testing if num_links==0 at the wrong place. Due to that, a backlink may be kept without removal, causing KASAN to complain about usage after free during either entity or link removal. Signed-off-by: -
Javier Martinez Canillas authored
The media_entity_cleanup() function only cleans up the entity links list but this operation is already made in media_device_unregister_entity(). In most cases this should be harmless (besides having duplicated code) since the links list would be empty so the iteration would not happen but the links list is initialized in media_device_register_entity() so if a driver fails to register an entity with a media device and clean up the entity in the error path, a NULL deference pointer error will happen. So don't try to empty the links list in media_entity_cleanup() since is either done already or haven't been initialized yet. Signed-off-by:Javier Martinez Canillas <javier@osg.samsung.com>
-
Mauro Carvalho Chehab authored
The DVB core needs to unregister the media device. So, we can't call au0828_unregister_media_device() before calling au0828_dvb_unregister(), otherwise the DVB MC free code (that will be implemented on the next patch) will fail. Signed-off-by: -
Mauro Carvalho Chehab authored
Interface links are normally enabled, meaning that the interfaces are bound to the entities. So, any ioctl sent to the interface are reflected at the entities managed by the interface. However, when a device is in use, other interfaces for the same hardware could be decoupled from the entities linked to them, because the hardware may have some parts busy. That's for example, what happens when an hybrid TV device is in use. If it is streaming analog TV or capturing signals from S-Video/Composite connectors, typically the digital part of the hardware can't be used and vice-versa. This is generally due to some internal hardware or firmware limitation, that it is not easily mapped via data pipelines. What the Kernel drivers do internally is that they decouple the hardware from the interface. So, all changes, if allowed, are done only at some interface cache, but not physically changed at the hardware. The usage is similar to the usage of the MEDIA_LNK_FL_ENABLED on data links. So, let's use the same flag to indicate if either the interface to entity link is bound/enabled or not. Acked-by:
-
Mauro Carvalho Chehab authored
Tuners actually have at least one connector on its input. Add a PAD to connect it. Acked-by:
-
Mauro Carvalho Chehab authored
Some parts of the media controller are using mutexes while others are using spin locks in order to protect creation and removal of elements in the graph. That's wrong! Also, the V4L2 core can remove graph elements on non-interactive context: BUG: sleeping function called from invalid context at include/linux/sched.h:2776 Fix it by always using spin locks for graph element addition/removal, just like entity creation/removal is protected at media-device.c Signed-off-by: -
Mauro Carvalho Chehab authored
Just like what's done with entities, when the media controller is unregistered, release any interface and interface links that might still be there. Signed-off-by: -
Mauro Carvalho Chehab authored
Interface links connected to an entity should be removed before the entity itself can be removed. Acked-by:
-
Mauro Carvalho Chehab authored
Add functions to explicitly unregister all entity links. This function is called automatically when an entity link is destroyed. Acked-by:
-
Mauro Carvalho Chehab authored
Add support for the new MEDIA_IOC_G_TOPOLOGY ioctl, according with the RFC for the MC next generation. Signed-off-by: -
Mauro Carvalho Chehab authored
Every time a graph object is added or removed, the version of the topology changes. That's a requirement for the new MEDIA_IOC_G_TOPOLOGY, in order to allow userspace to know that the topology has changed after a previous call to it. Acked-by:
-
Mauro Carvalho Chehab authored
The MC next gen API sends objects to userspace grouped by their types. In the case of pads and links, in order to improve performance and have a simpler code, the best is to store them also on separate linked lists at MC. If we don't do that, we would need this kind of interaction to send data to userspace (code is in structured english): for each entity: for each pad: store pads for each entity: for each link: store link for each interface: for each link: store link With would require one nested loop for pads and two nested loops for links. By using separate linked lists for them, just one loop would be enough. Acked-by:
-
Mauro Carvalho Chehab authored
Let's control the topology changes inside the graph_object. So, move the addition and removal of interfaces/entities from the mdev lists to media_gobj_init() and media_gobj_remove(). The main reason is that mdev should have lists for all object types, as the new MC api will require to store objects in separate places. Acked-by:
-
Mauro Carvalho Chehab authored
Just like we do with entities, use a similar macro for the interfaces loop. Acked-by:
-
Mauro Carvalho Chehab authored
Add a new ioctl that will report the entire topology on one go. Acked-by:
-
Mauro Carvalho Chehab authored
Sometimes, it is important to see if the created pad is sink or source. Add info to track that. Acked-by:
-
Mauro Carvalho Chehab authored
The Media Controller New Generation redefines the types for both interfaces and entities to be used on DVB. Make the needed changes at the DVB core for all interfaces, entities and data and interface links to appear in the graph. Acked-by:
-
Mauro Carvalho Chehab authored
Cleanup the media controller entities description: - remove MEDIA_ENT_T_DEVNODE and MEDIA_ENT_T_V4L2_SUBDEV entity types, as they don't mean anything; - add MEDIA_ENT_T_UNKNOWN with a proper description; - remove ALSA and FB entity types. Those should not be used, as the types are deprecated. We'll soon be adidng ALSA, but with a different entity namespace; - improve the description of some entities. Signed-off-by: -
Mauro Carvalho Chehab authored
Put the legacy MEDIA_ENT_* macros under a #ifndef __KERNEL__, in order to be sure that none of those old symbols are used inside the Kernel. Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
-
Mauro Carvalho Chehab authored
Don't use anymore the type/subtype entity data/macros inside the Kernel. Acked-by:
-
Mauro Carvalho Chehab authored
Instead of abusing MEDIA_ENT_T_V4L2_SUBDEV, initialize new subdev entities as MEDIA_ENT_T_UNKNOWN. Acked-by:
-
Mauro Carvalho Chehab authored
As we're getting rid of an specific number range for the V4L2 subdev, we need to replace the check for MEDIA_ENT_T_V4L2_SUBDEV by a macro. Signed-off-by: -
Mauro Carvalho Chehab authored
This driver is abusing MEDIA_ENT_T_V4L2_SUBDEV: - it uses a hack to check if the remote entity is a subdev; - it still uses the legacy entity subtype check macro, that will be removed soon. Signed-off-by: -
Mauro Carvalho Chehab authored
The driver creates two subdevs, one for the image sensor pixel array (and the related readout logic) and one for an ISP. The first subdev already uses the MEDIA_ENT_T_V4L2_SUBDEV_SENSOR type, but the second subdev isn't a sensor pixel array. So, rename the second subdev as MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN. Signed-off-by: -
Mauro Carvalho Chehab authored
This sensor driver is abusing MEDIA_ENT_T_V4L2_SUBDEV, creating some subdevs with a non-existing type. As this is a sensor driver, one of the entries is MEDIA_ENT_T_CAM_SENSOR. The other one will be using MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN, because the subdev is not any of the already existing types. Signed-off-by: -
Mauro Carvalho Chehab authored
On omap3/omap4/davinci drivers, MEDIA_ENT_T_V4L2_SUBDEV macro is abused in order to "simplify" the pad checks. Basically, it does a logical or of this macro, in order to check for a local index and if the entity is either a subdev or not. As we'll get rid of MEDIA_ENT_T_V4L2_SUBDEV macro, replace it by 2 << 16 where it occurs, and add a note saying that the code there is actually a hack. Signed-off-by: -
Mauro Carvalho Chehab authored
Instead of relying on media subtype, use the new macros to detect if an entity is a subdev or an A/V DMA entity. Please note that most drivers assume that there's just AV_DMA or V4L2 subdevs. This is not true anymore, as we've added MC support for DVB, and there are plans to add support for ALSA and FB/DRM too. Ok, on the current pipelines supported by those drivers, just V4L stuff are there, but, assuming that some day a pipeline that also works with other subsystems will ever added, it is better to add explicit checks for the AV_DMA stuff. Acked-by:
-
Mauro Carvalho Chehab authored
As we'll be removing entity subtypes from the Kernel, we need to provide a way for drivers and core to check if a given entity is represented by a V4L2 subdev or if it is an V4L2 I/O entity (typically with DMA). Drivers that create entities that don't belong to any defined subdev category should use MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN. Acked-by:
-
Mauro Carvalho Chehab authored
Now that interfaces and entities are distinct, it makes no sense of keeping something named as MEDIA_ENT_T_DEVNODE_DVB_foo. Made via this script: for i in $(git grep -l MEDIA_ENT_T|grep -v uapi/linux/media.h); do sed s,MEDIA_ENT_T_DEVNODE_DVB_,MEDIA_ENT_T_DVB_, <$i >a && mv a $i; done for i in $(git grep -l MEDIA_ENT_T|grep -v uapi/linux/media.h); do sed s,MEDIA_ENT_T_DVB_DVR,MEDIA_ENT_T_DVB_TSOUT, <$i >a && mv a $i; done for i in $(git grep -l MEDIA_ENT_T|grep -v uapi/linux/media.h); do sed s,MEDIA_ENT_T_DVB_FE,MEDIA_ENT_T_DVB_DEMOD, <$i >a && mv a $i; done for i in $(git grep -l MEDIA_ENT_T|grep -v uapi/linux/media.h); do sed s,MEDIA_ENT_T_DVB_NET,MEDIA_ENT_T_DVB_DEMOD_NET_DECAP, <$i >a && mv a $i; done Acked-by:
-
Mauro Carvalho Chehab authored
Now that interfaces and entities are distinct, it makes no sense of keeping something named as MEDIA_ENT_T_DEVNODE. This change was done with this script: for i in $(git grep -l MEDIA_ENT_T|grep -v uapi/linux/media.h); do sed s,MEDIA_ENT_T_DEVNODE_V4L,MEDIA_ENT_T_V4L2_VIDEO, <$i >a && mv a $i; done Acked-by:
-
