1. 28 Oct, 2015 36 commits
    • Filipe Manana's avatar
      Btrfs: update fix for read corruption of compressed and shared extents · 5e7dd6c7
      Filipe Manana authored
      commit 808f80b4 upstream.
      
      My previous fix in commit 005efedf ("Btrfs: fix read corruption of
      compressed and shared extents") was effective only if the compressed
      extents cover a file range with a length that is not a multiple of 16
      pages. That's because the detection of when we reached a different range
      of the file that shares the same compressed extent as the previously
      processed range was done at extent_io.c:__do_contiguous_readpages(),
      which covers subranges with a length up to 16 pages, because
      extent_readpages() groups the pages in clusters no larger than 16 pages.
      So fix this by tracking the start of the previously processed file
      range's extent map at extent_readpages().
      
      The following test case for fstests reproduces the issue:
      
        seq=`basename $0`
        seqres=$RESULT_DIR/$seq
        echo "QA output created by $seq"
        tmp=/tmp/$$
        status=1	# failure is the default!
        trap "_cleanup; exit \$status" 0 1 2 3 15
      
        _cleanup()
        {
            rm -f $tmp.*
        }
      
        # get standard environment, filters and checks
        . ./common/rc
        . ./common/filter
      
        # real QA test starts here
        _need_to_be_root
        _supported_fs btrfs
        _supported_os Linux
        _require_scratch
        _require_cloner
      
        rm -f $seqres.full
      
        test_clone_and_read_compressed_extent()
        {
            local mount_opts=$1
      
            _scratch_mkfs >>$seqres.full 2>&1
            _scratch_mount $mount_opts
      
            # Create our test file with a single extent of 64Kb that is going to
            # be compressed no matter which compression algo is used (zlib/lzo).
            $XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 64K" \
                $SCRATCH_MNT/foo | _filter_xfs_io
      
            # Now clone the compressed extent into an adjacent file offset.
            $CLONER_PROG -s 0 -d $((64 * 1024)) -l $((64 * 1024)) \
                $SCRATCH_MNT/foo $SCRATCH_MNT/foo
      
            echo "File digest before unmount:"
            md5sum $SCRATCH_MNT/foo | _filter_scratch
      
            # Remount the fs or clear the page cache to trigger the bug in
            # btrfs. Because the extent has an uncompressed length that is a
            # multiple of 16 pages, all the pages belonging to the second range
            # of the file (64K to 128K), which points to the same extent as the
            # first range (0K to 64K), had their contents full of zeroes instead
            # of the byte 0xaa. This was a bug exclusively in the read path of
            # compressed extents, the correct data was stored on disk, btrfs
            # just failed to fill in the pages correctly.
            _scratch_remount
      
            echo "File digest after remount:"
            # Must match the digest we got before.
            md5sum $SCRATCH_MNT/foo | _filter_scratch
        }
      
        echo -e "\nTesting with zlib compression..."
        test_clone_and_read_compressed_extent "-o compress=zlib"
      
        _scratch_unmount
      
        echo -e "\nTesting with lzo compression..."
        test_clone_and_read_compressed_extent "-o compress=lzo"
      
        status=0
        exit
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      Tested-by: default avatarTimofey Titovets <nefelim4ag@gmail.com>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      5e7dd6c7
    • David Howells's avatar
      KEYS: Don't permit request_key() to construct a new keyring · ca564ff2
      David Howells authored
      commit 911b79cd upstream.
      
      If request_key() is used to find a keyring, only do the search part - don't
      do the construction part if the keyring was not found by the search.  We
      don't really want keyrings in the negative instantiated state since the
      rejected/negative instantiation error value in the payload is unioned with
      keyring metadata.
      
      Now the kernel gives an error:
      
      	request_key("keyring", "#selinux,bdekeyring", "keyring", KEY_SPEC_USER_SESSION_KEYRING) = -1 EPERM (Operation not permitted)
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      Cc: Kamal Mostafa <kamal@canonical.com>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      ca564ff2
    • David Howells's avatar
      KEYS: Fix crash when attempt to garbage collect an uninstantiated keyring · 4944cea7
      David Howells authored
      commit f05819df upstream.
      
      The following sequence of commands:
      
          i=`keyctl add user a a @s`
          keyctl request2 keyring foo bar @t
          keyctl unlink $i @s
      
      tries to invoke an upcall to instantiate a keyring if one doesn't already
      exist by that name within the user's keyring set.  However, if the upcall
      fails, the code sets keyring->type_data.reject_error to -ENOKEY or some
      other error code.  When the key is garbage collected, the key destroy
      function is called unconditionally and keyring_destroy() uses list_empty()
      on keyring->type_data.link - which is in a union with reject_error.
      Subsequently, the kernel tries to unlink the keyring from the keyring names
      list - which oopses like this:
      
      	BUG: unable to handle kernel paging request at 00000000ffffff8a
      	IP: [<ffffffff8126e051>] keyring_destroy+0x3d/0x88
      	...
      	Workqueue: events key_garbage_collector
      	...
      	RIP: 0010:[<ffffffff8126e051>] keyring_destroy+0x3d/0x88
      	RSP: 0018:ffff88003e2f3d30  EFLAGS: 00010203
      	RAX: 00000000ffffff82 RBX: ffff88003bf1a900 RCX: 0000000000000000
      	RDX: 0000000000000000 RSI: 000000003bfc6901 RDI: ffffffff81a73a40
      	RBP: ffff88003e2f3d38 R08: 0000000000000152 R09: 0000000000000000
      	R10: ffff88003e2f3c18 R11: 000000000000865b R12: ffff88003bf1a900
      	R13: 0000000000000000 R14: ffff88003bf1a908 R15: ffff88003e2f4000
      	...
      	CR2: 00000000ffffff8a CR3: 000000003e3ec000 CR4: 00000000000006f0
      	...
      	Call Trace:
      	 [<ffffffff8126c756>] key_gc_unused_keys.constprop.1+0x5d/0x10f
      	 [<ffffffff8126ca71>] key_garbage_collector+0x1fa/0x351
      	 [<ffffffff8105ec9b>] process_one_work+0x28e/0x547
      	 [<ffffffff8105fd17>] worker_thread+0x26e/0x361
      	 [<ffffffff8105faa9>] ? rescuer_thread+0x2a8/0x2a8
      	 [<ffffffff810648ad>] kthread+0xf3/0xfb
      	 [<ffffffff810647ba>] ? kthread_create_on_node+0x1c2/0x1c2
      	 [<ffffffff815f2ccf>] ret_from_fork+0x3f/0x70
      	 [<ffffffff810647ba>] ? kthread_create_on_node+0x1c2/0x1c2
      
      Note the value in RAX.  This is a 32-bit representation of -ENOKEY.
      
      The solution is to only call ->destroy() if the key was successfully
      instantiated.
      Reported-by: default avatarDmitry Vyukov <dvyukov@google.com>
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      Tested-by: default avatarDmitry Vyukov <dvyukov@google.com>
      Cc: Kamal Mostafa <kamal@canonical.com>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      4944cea7
    • David Howells's avatar
      KEYS: Fix race between key destruction and finding a keyring by name · 35694b04
      David Howells authored
      commit 94c4554b upstream.
      
      There appears to be a race between:
      
       (1) key_gc_unused_keys() which frees key->security and then calls
           keyring_destroy() to unlink the name from the name list
      
       (2) find_keyring_by_name() which calls key_permission(), thus accessing
           key->security, on a key before checking to see whether the key usage is 0
           (ie. the key is dead and might be cleaned up).
      
      Fix this by calling ->destroy() before cleaning up the core key data -
      including key->security.
      Reported-by: default avatarPetr Matousek <pmatouse@redhat.com>
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      Cc: Kamal Mostafa <kamal@canonical.com>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      35694b04
    • Sabrina Dubroca's avatar
      [stable-only] net: add length argument to skb_copy_and_csum_datagram_iovec · fa89ae55
      Sabrina Dubroca authored
      Without this length argument, we can read past the end of the iovec in
      memcpy_toiovec because we have no way of knowing the total length of the
      iovec's buffers.
      
      This is needed for stable kernels where 89c22d8c ("net: Fix skb
      csum races when peeking") has been backported but that don't have the
      ioviter conversion, which is almost all the stable trees <= 3.18.
      
      This also fixes a kernel crash for NFS servers when the client uses
       -onfsvers=3,proto=udp to mount the export.
      Signed-off-by: default avatarSabrina Dubroca <sd@queasysnail.net>
      Reviewed-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
      [ luis: backported to 3.16:
        - dropped changes to net/rxrpc/ar-recvmsg.c ]
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      fa89ae55
    • Arad, Ronen's avatar
      netlink: Trim skb to alloc size to avoid MSG_TRUNC · 9a11693d
      Arad, Ronen authored
      commit db65a3aa upstream.
      
      netlink_dump() allocates skb based on the calculated min_dump_alloc or
      a per socket max_recvmsg_len.
      min_alloc_size is maximum space required for any single netdev
      attributes as calculated by rtnl_calcit().
      max_recvmsg_len tracks the user provided buffer to netlink_recvmsg.
      It is capped at 16KiB.
      The intention is to avoid small allocations and to minimize the number
      of calls required to obtain dump information for all net devices.
      
      netlink_dump packs as many small messages as could fit within an skb
      that was sized for the largest single netdev information. The actual
      space available within an skb is larger than what is requested. It could
      be much larger and up to near 2x with align to next power of 2 approach.
      
      Allowing netlink_dump to use all the space available within the
      allocated skb increases the buffer size a user has to provide to avoid
      truncaion (i.e. MSG_TRUNG flag set).
      
      It was observed that with many VLANs configured on at least one netdev,
      a larger buffer of near 64KiB was necessary to avoid "Message truncated"
      error in "ip link" or "bridge [-c[ompressvlans]] vlan show" when
      min_alloc_size was only little over 32KiB.
      
      This patch trims skb to allocated size in order to allow the user to
      avoid truncation with more reasonable buffer size.
      Signed-off-by: default avatarRonen Arad <ronen.arad@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      9a11693d
    • Konstantin Khlebnikov's avatar
      ovs: do not allocate memory from offline numa node · 67f4c396
      Konstantin Khlebnikov authored
      commit 598c12d0 upstream.
      
      When openvswitch tries allocate memory from offline numa node 0:
      stats = kmem_cache_alloc_node(flow_stats_cache, GFP_KERNEL | __GFP_ZERO, 0)
      It catches VM_BUG_ON(nid < 0 || nid >= MAX_NUMNODES || !node_online(nid))
      [ replaced with VM_WARN_ON(!node_online(nid)) recently ] in linux/gfp.h
      This patch disables numa affinity in this case.
      Signed-off-by: default avatarKonstantin Khlebnikov <khlebnikov@yandex-team.ru>
      Acked-by: default avatarPravin B Shelar <pshelar@nicira.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      67f4c396
    • Joe Perches's avatar
      ethtool: Use kcalloc instead of kmalloc for ethtool_get_strings · d1a84d87
      Joe Perches authored
      commit 077cb37f upstream.
      
      It seems that kernel memory can leak into userspace by a
      kmalloc, ethtool_get_strings, then copy_to_user sequence.
      
      Avoid this by using kcalloc to zero fill the copied buffer.
      Signed-off-by: default avatarJoe Perches <joe@perches.com>
      Acked-by: default avatarBen Hutchings <ben@decadent.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      d1a84d87
    • Guillaume Nault's avatar
      ppp: don't override sk->sk_state in pppoe_flush_dev() · 48af18da
      Guillaume Nault authored
      commit e6740165 upstream.
      
      Since commit 2b018d57 ("pppoe: drop PPPOX_ZOMBIEs in pppoe_release"),
      pppoe_release() calls dev_put(po->pppoe_dev) if sk is in the
      PPPOX_ZOMBIE state. But pppoe_flush_dev() can set sk->sk_state to
      PPPOX_ZOMBIE _and_ reset po->pppoe_dev to NULL. This leads to the
      following oops:
      
      [  570.140800] BUG: unable to handle kernel NULL pointer dereference at 00000000000004e0
      [  570.142931] IP: [<ffffffffa018c701>] pppoe_release+0x50/0x101 [pppoe]
      [  570.144601] PGD 3d119067 PUD 3dbc1067 PMD 0
      [  570.144601] Oops: 0000 [#1] SMP
      [  570.144601] Modules linked in: l2tp_ppp l2tp_netlink l2tp_core ip6_udp_tunnel udp_tunnel pppoe pppox ppp_generic slhc loop crc32c_intel ghash_clmulni_intel jitterentropy_rng sha256_generic hmac drbg ansi_cprng aesni_intel aes_x86_64 ablk_helper cryptd lrw gf128mul glue_helper acpi_cpufreq evdev serio_raw processor button ext4 crc16 mbcache jbd2 virtio_net virtio_blk virtio_pci virtio_ring virtio
      [  570.144601] CPU: 1 PID: 15738 Comm: ppp-apitest Not tainted 4.2.0 #1
      [  570.144601] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
      [  570.144601] task: ffff88003d30d600 ti: ffff880036b60000 task.ti: ffff880036b60000
      [  570.144601] RIP: 0010:[<ffffffffa018c701>]  [<ffffffffa018c701>] pppoe_release+0x50/0x101 [pppoe]
      [  570.144601] RSP: 0018:ffff880036b63e08  EFLAGS: 00010202
      [  570.144601] RAX: 0000000000000000 RBX: ffff880034340000 RCX: 0000000000000206
      [  570.144601] RDX: 0000000000000006 RSI: ffff88003d30dd20 RDI: ffff88003d30dd20
      [  570.144601] RBP: ffff880036b63e28 R08: 0000000000000001 R09: 0000000000000000
      [  570.144601] R10: 00007ffee9b50420 R11: ffff880034340078 R12: ffff8800387ec780
      [  570.144601] R13: ffff8800387ec7b0 R14: ffff88003e222aa0 R15: ffff8800387ec7b0
      [  570.144601] FS:  00007f5672f48700(0000) GS:ffff88003fc80000(0000) knlGS:0000000000000000
      [  570.144601] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [  570.144601] CR2: 00000000000004e0 CR3: 0000000037f7e000 CR4: 00000000000406a0
      [  570.144601] Stack:
      [  570.144601]  ffffffffa018f240 ffff8800387ec780 ffffffffa018f240 ffff8800387ec7b0
      [  570.144601]  ffff880036b63e48 ffffffff812caabe ffff880039e4e000 0000000000000008
      [  570.144601]  ffff880036b63e58 ffffffff812cabad ffff880036b63ea8 ffffffff811347f5
      [  570.144601] Call Trace:
      [  570.144601]  [<ffffffff812caabe>] sock_release+0x1a/0x75
      [  570.144601]  [<ffffffff812cabad>] sock_close+0xd/0x11
      [  570.144601]  [<ffffffff811347f5>] __fput+0xff/0x1a5
      [  570.144601]  [<ffffffff811348cb>] ____fput+0x9/0xb
      [  570.144601]  [<ffffffff81056682>] task_work_run+0x66/0x90
      [  570.144601]  [<ffffffff8100189e>] prepare_exit_to_usermode+0x8c/0xa7
      [  570.144601]  [<ffffffff81001a26>] syscall_return_slowpath+0x16d/0x19b
      [  570.144601]  [<ffffffff813babb1>] int_ret_from_sys_call+0x25/0x9f
      [  570.144601] Code: 48 8b 83 c8 01 00 00 a8 01 74 12 48 89 df e8 8b 27 14 e1 b8 f7 ff ff ff e9 b7 00 00 00 8a 43 12 a8 0b 74 1c 48 8b 83 a8 04 00 00 <48> 8b 80 e0 04 00 00 65 ff 08 48 c7 83 a8 04 00 00 00 00 00 00
      [  570.144601] RIP  [<ffffffffa018c701>] pppoe_release+0x50/0x101 [pppoe]
      [  570.144601]  RSP <ffff880036b63e08>
      [  570.144601] CR2: 00000000000004e0
      [  570.200518] ---[ end trace 46956baf17349563 ]---
      
      pppoe_flush_dev() has no reason to override sk->sk_state with
      PPPOX_ZOMBIE. pppox_unbind_sock() already sets sk->sk_state to
      PPPOX_DEAD, which is the correct state given that sk is unbound and
      po->pppoe_dev is NULL.
      
      Fixes: 2b018d57 ("pppoe: drop PPPOX_ZOMBIEs in pppoe_release")
      Tested-by: default avatarOleksii Berezhniak <core@irc.lg.ua>
      Signed-off-by: default avatarGuillaume Nault <g.nault@alphalink.fr>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      48af18da
    • Eric Dumazet's avatar
      net: add pfmemalloc check in sk_add_backlog() · 9913ff9c
      Eric Dumazet authored
      commit c7c49b8f upstream.
      
      Greg reported crashes hitting the following check in __sk_backlog_rcv()
      
      	BUG_ON(!sock_flag(sk, SOCK_MEMALLOC));
      
      The pfmemalloc bit is currently checked in sk_filter().
      
      This works correctly for TCP, because sk_filter() is ran in
      tcp_v[46]_rcv() before hitting the prequeue or backlog checks.
      
      For UDP or other protocols, this does not work, because the sk_filter()
      is ran from sock_queue_rcv_skb(), which might be called _after_ backlog
      queuing if socket is owned by user by the time packet is processed by
      softirq handler.
      
      Fixes: b4b9e355 ("netvm: set PF_MEMALLOC as appropriate during SKB processing")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarGreg Thelen <gthelen@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      9913ff9c
    • Pravin B Shelar's avatar
      skbuff: Fix skb checksum partial check. · fc3befaa
      Pravin B Shelar authored
      commit 31b33dfb upstream.
      
      Earlier patch 6ae459bd tried to detect void ckecksum partial
      skb by comparing pull length to checksum offset. But it does
      not work for all cases since checksum-offset depends on
      updates to skb->data.
      
      Following patch fixes it by validating checksum start offset
      after skb-data pointer is updated. Negative value of checksum
      offset start means there is no need to checksum.
      
      Fixes: 6ae459bd ("skbuff: Fix skb checksum flag on skb pull")
      Reported-by: default avatarAndrew Vagin <avagin@odin.com>
      Signed-off-by: default avatarPravin B Shelar <pshelar@nicira.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      fc3befaa
    • Pravin B Shelar's avatar
      skbuff: Fix skb checksum flag on skb pull · a5162a04
      Pravin B Shelar authored
      commit 6ae459bd upstream.
      
      VXLAN device can receive skb with checksum partial. But the checksum
      offset could be in outer header which is pulled on receive. This results
      in negative checksum offset for the skb. Such skb can cause the assert
      failure in skb_checksum_help(). Following patch fixes the bug by setting
      checksum-none while pulling outer header.
      
      Following is the kernel panic msg from old kernel hitting the bug.
      
      ------------[ cut here ]------------
      kernel BUG at net/core/dev.c:1906!
      RIP: 0010:[<ffffffff81518034>] skb_checksum_help+0x144/0x150
      Call Trace:
      <IRQ>
      [<ffffffffa0164c28>] queue_userspace_packet+0x408/0x470 [openvswitch]
      [<ffffffffa016614d>] ovs_dp_upcall+0x5d/0x60 [openvswitch]
      [<ffffffffa0166236>] ovs_dp_process_packet_with_key+0xe6/0x100 [openvswitch]
      [<ffffffffa016629b>] ovs_dp_process_received_packet+0x4b/0x80 [openvswitch]
      [<ffffffffa016c51a>] ovs_vport_receive+0x2a/0x30 [openvswitch]
      [<ffffffffa0171383>] vxlan_rcv+0x53/0x60 [openvswitch]
      [<ffffffffa01734cb>] vxlan_udp_encap_recv+0x8b/0xf0 [openvswitch]
      [<ffffffff8157addc>] udp_queue_rcv_skb+0x2dc/0x3b0
      [<ffffffff8157b56f>] __udp4_lib_rcv+0x1cf/0x6c0
      [<ffffffff8157ba7a>] udp_rcv+0x1a/0x20
      [<ffffffff8154fdbd>] ip_local_deliver_finish+0xdd/0x280
      [<ffffffff81550128>] ip_local_deliver+0x88/0x90
      [<ffffffff8154fa7d>] ip_rcv_finish+0x10d/0x370
      [<ffffffff81550365>] ip_rcv+0x235/0x300
      [<ffffffff8151ba1d>] __netif_receive_skb+0x55d/0x620
      [<ffffffff8151c360>] netif_receive_skb+0x80/0x90
      [<ffffffff81459935>] virtnet_poll+0x555/0x6f0
      [<ffffffff8151cd04>] net_rx_action+0x134/0x290
      [<ffffffff810683d8>] __do_softirq+0xa8/0x210
      [<ffffffff8162fe6c>] call_softirq+0x1c/0x30
      [<ffffffff810161a5>] do_softirq+0x65/0xa0
      [<ffffffff810687be>] irq_exit+0x8e/0xb0
      [<ffffffff81630733>] do_IRQ+0x63/0xe0
      [<ffffffff81625f2e>] common_interrupt+0x6e/0x6e
      Reported-by: default avatarAnupam Chanda <achanda@vmware.com>
      Signed-off-by: default avatarPravin B Shelar <pshelar@nicira.com>
      Acked-by: default avatarTom Herbert <tom@herbertland.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      a5162a04
    • Andrey Vagin's avatar
      net/unix: fix logic about sk_peek_offset · f465fb24
      Andrey Vagin authored
      commit e9193d60 upstream.
      
      Now send with MSG_PEEK can return data from multiple SKBs.
      
      Unfortunately we take into account the peek offset for each skb,
      that is wrong. We need to apply the peek offset only once.
      
      In addition, the peek offset should be used only if MSG_PEEK is set.
      
      Cc: "David S. Miller" <davem@davemloft.net> (maintainer:NETWORKING
      Cc: Eric Dumazet <edumazet@google.com> (commit_signer:1/14=7%)
      Cc: Aaron Conole <aconole@bytheb.org>
      Fixes: 9f389e35 ("af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag")
      Signed-off-by: default avatarAndrey Vagin <avagin@openvz.org>
      Tested-by: default avatarAaron Conole <aconole@bytheb.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      f465fb24
    • Aaron Conole's avatar
      af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag · f50e5d9f
      Aaron Conole authored
      commit 9f389e35 upstream.
      
      AF_UNIX sockets now return multiple skbs from recv() when MSG_PEEK flag
      is set.
      
      This is referenced in kernel bugzilla #12323 @
      https://bugzilla.kernel.org/show_bug.cgi?id=12323
      
      As described both in the BZ and lkml thread @
      http://lkml.org/lkml/2008/1/8/444 calling recv() with MSG_PEEK on an
      AF_UNIX socket only reads a single skb, where the desired effect is
      to return as much skb data has been queued, until hitting the recv
      buffer size (whichever comes first).
      
      The modified MSG_PEEK path will now move to the next skb in the tree
      and jump to the again: label, rather than following the natural loop
      structure. This requires duplicating some of the loop head actions.
      
      This was tested using the python socketpair python code attached to
      the bugzilla issue.
      Signed-off-by: default avatarAaron Conole <aconole@bytheb.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      [ luis: backported to 3.16: used davem's backport to 3.14 ]
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      f50e5d9f
    • Aaron Conole's avatar
      af_unix: Convert the unix_sk macro to an inline function for type safety · 0c87afc8
      Aaron Conole authored
      commit 4613012d upstream.
      
      As suggested by Eric Dumazet this change replaces the
      complaints by the compiler when misusing the API.
      Signed-off-by: default avatarAaron Conole <aconole@bytheb.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      0c87afc8
    • Alexander Couzens's avatar
      l2tp: protect tunnel->del_work by ref_count · 915d86a8
      Alexander Couzens authored
      commit 06a15f51 upstream.
      
      There is a small chance that tunnel_free() is called before tunnel->del_work scheduled
      resulting in a zero pointer dereference.
      Signed-off-by: default avatarAlexander Couzens <lynxis@fe80.eu>
      Acked-by: default avatarJames Chapman <jchapman@katalix.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      915d86a8
    • Nikhil Badola's avatar
      drivers: usb: fsl: Workaround for USB erratum-A005275 · f6c179b5
      Nikhil Badola authored
      commit f8786a91 upstream.
      
      Incoming packets in high speed are randomly corrupted by h/w
      resulting in multiple errors. This workaround makes FS as
      default mode in all affected socs by disabling HS chirp
      signalling.This errata does not affect FS and LS mode.
      
      Forces all HS devices to connect in FS mode for all socs
      affected by this erratum:
      P3041 and P2041 rev 1.0 and 1.1
      P5020 and P5010 rev 1.0 and 2.0
      P5040, P1010 and T4240 rev 1.0
      Signed-off-by: default avatarRamneek Mehresh <ramneek.mehresh@freescale.com>
      Signed-off-by: default avatarNikhil Badola <nikhil.badola@freescale.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      f6c179b5
    • Nikhil Badola's avatar
      drivers: usb :fsl: Implement Workaround for USB Erratum A007792 · 7ec9b7fb
      Nikhil Badola authored
      commit 523f1dec upstream.
      
      USB controller version-2.5 requires to enable internal UTMI
      phy and program PTS field in PORTSC register before asserting
      controller reset. This is must for successful resetting of the
      controller and subsequent enumeration of usb devices
      Signed-off-by: default avatarNikhil Badola <nikhil.badola@freescale.com>
      Signed-off-by: default avatarSuresh Gupta <suresh.gupta@freescale.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      7ec9b7fb
    • Manfred Spraul's avatar
      ipc/sem.c: fully initialize sem_array before making it visible · 35cfc2b3
      Manfred Spraul authored
      commit e8577d1f upstream.
      
      ipc_addid() makes a new ipc identifier visible to everyone.  New objects
      start as locked, so that the caller can complete the initialization
      after the call.  Within struct sem_array, at least sma->sem_base and
      sma->sem_nsems are accessed without any locks, therefore this approach
      doesn't work.
      
      Thus: Move the ipc_addid() to the end of the initialization.
      Signed-off-by: default avatarManfred Spraul <manfred@colorfullife.com>
      Reported-by: default avatarRik van Riel <riel@redhat.com>
      Acked-by: default avatarRik van Riel <riel@redhat.com>
      Acked-by: default avatarDavidlohr Bueso <dave@stgolabs.net>
      Acked-by: default avatarRafael Aquini <aquini@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      35cfc2b3
    • lucien's avatar
      sctp: donot reset the overall_error_count in SHUTDOWN_RECEIVE state · 4e501862
      lucien authored
      commit f648f807 upstream.
      
      Commit f8d96052 ("sctp: Enforce retransmission limit during shutdown")
      fixed a problem with excessive retransmissions in the SHUTDOWN_PENDING by not
      resetting the association overall_error_count.  This allowed the association
      to better enforce assoc.max_retrans limit.
      
      However, the same issue still exists when the association is in SHUTDOWN_RECEIVED
      state.  In this state, HB-ACKs will continue to reset the overall_error_count
      for the association would extend the lifetime of association unnecessarily.
      
      This patch solves this by resetting the overall_error_count whenever the current
      state is small then SCTP_STATE_SHUTDOWN_PENDING.  As a small side-effect, we
      end up also handling SCTP_STATE_SHUTDOWN_ACK_SENT and SCTP_STATE_SHUTDOWN_SENT
      states, but they are not really impacted because we disable Heartbeats in those
      states.
      
      Fixes: Commit f8d96052 ("sctp: Enforce retransmission limit during shutdown")
      Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
      Acked-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
      Acked-by: default avatarVlad Yasevich <vyasevich@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      4e501862
    • Jann Horn's avatar
      fs: if a coredump already exists, unlink and recreate with O_EXCL · 57170087
      Jann Horn authored
      commit fbb18169 upstream.
      
      It was possible for an attacking user to trick root (or another user) into
      writing his coredumps into an attacker-readable, pre-existing file using
      rename() or link(), causing the disclosure of secret data from the victim
      process' virtual memory.  Depending on the configuration, it was also
      possible to trick root into overwriting system files with coredumps.  Fix
      that issue by never writing coredumps into existing files.
      
      Requirements for the attack:
       - The attack only applies if the victim's process has a nonzero
         RLIMIT_CORE and is dumpable.
       - The attacker can trick the victim into coredumping into an
         attacker-writable directory D, either because the core_pattern is
         relative and the victim's cwd is attacker-writable or because an
         absolute core_pattern pointing to a world-writable directory is used.
       - The attacker has one of these:
        A: on a system with protected_hardlinks=0:
           execute access to a folder containing a victim-owned,
           attacker-readable file on the same partition as D, and the
           victim-owned file will be deleted before the main part of the attack
           takes place. (In practice, there are lots of files that fulfill
           this condition, e.g. entries in Debian's /var/lib/dpkg/info/.)
           This does not apply to most Linux systems because most distros set
           protected_hardlinks=1.
        B: on a system with protected_hardlinks=1:
           execute access to a folder containing a victim-owned,
           attacker-readable and attacker-writable file on the same partition
           as D, and the victim-owned file will be deleted before the main part
           of the attack takes place.
           (This seems to be uncommon.)
        C: on any system, independent of protected_hardlinks:
           write access to a non-sticky folder containing a victim-owned,
           attacker-readable file on the same partition as D
           (This seems to be uncommon.)
      
      The basic idea is that the attacker moves the victim-owned file to where
      he expects the victim process to dump its core.  The victim process dumps
      its core into the existing file, and the attacker reads the coredump from
      it.
      
      If the attacker can't move the file because he does not have write access
      to the containing directory, he can instead link the file to a directory
      he controls, then wait for the original link to the file to be deleted
      (because the kernel checks that the link count of the corefile is 1).
      
      A less reliable variant that requires D to be non-sticky works with link()
      and does not require deletion of the original link: link() the file into
      D, but then unlink() it directly before the kernel performs the link count
      check.
      
      On systems with protected_hardlinks=0, this variant allows an attacker to
      not only gain information from coredumps, but also clobber existing,
      victim-writable files with coredumps.  (This could theoretically lead to a
      privilege escalation.)
      Signed-off-by: default avatarJann Horn <jann@thejh.net>
      Cc: Kees Cook <keescook@chromium.org>
      Cc: Al Viro <viro@zeniv.linux.org.uk>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      57170087
    • Thomas Hellstrom's avatar
      drm/vmwgfx: Fix kernel NULL pointer dereference on older hardware · fd3a964b
      Thomas Hellstrom authored
      commit ed7d78b2 upstream.
      
      The commit "drm/vmwgfx: Fix up user_dmabuf refcounting", while fixing a
      kernel crash introduced a NULL pointer dereference on older hardware.
      Fix this.
      Signed-off-by: default avatarThomas Hellstrom <thellstrom@vmware.com>
      Reviewed-by: default avatarSinclair Yeh <syeh@vmware.com>
      Reviewed-by: default avatarBrian Paul <brianp@vmware.com>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      fd3a964b
    • Joonsoo Kim's avatar
      mm/slab: fix unexpected index mapping result of kmalloc_size(INDEX_NODE+1) · 2efdc7e5
      Joonsoo Kim authored
      commit 03a2d2a3 upstream.
      
      Commit description is copied from the original post of this bug:
      
        http://comments.gmane.org/gmane.linux.kernel.mm/135349
      
      Kernels after v3.9 use kmalloc_size(INDEX_NODE + 1) to get the next
      larger cache size than the size index INDEX_NODE mapping.  In kernels
      3.9 and earlier we used malloc_sizes[INDEX_L3 + 1].cs_size.
      
      However, sometimes we can't get the right output we expected via
      kmalloc_size(INDEX_NODE + 1), causing a BUG().
      
      The mapping table in the latest kernel is like:
          index = {0,   1,  2 ,  3,  4,   5,   6,   n}
           size = {0,   96, 192, 8, 16,  32,  64,   2^n}
      The mapping table before 3.10 is like this:
          index = {0 , 1 , 2,   3,  4 ,  5 ,  6,   n}
          size  = {32, 64, 96, 128, 192, 256, 512, 2^(n+3)}
      
      The problem on my mips64 machine is as follows:
      
      (1) When configured DEBUG_SLAB && DEBUG_PAGEALLOC && DEBUG_LOCK_ALLOC
          && DEBUG_SPINLOCK, the sizeof(struct kmem_cache_node) will be "150",
          and the macro INDEX_NODE turns out to be "2": #define INDEX_NODE
          kmalloc_index(sizeof(struct kmem_cache_node))
      
      (2) Then the result of kmalloc_size(INDEX_NODE + 1) is 8.
      
      (3) Then "if(size >= kmalloc_size(INDEX_NODE + 1)" will lead to "size
          = PAGE_SIZE".
      
      (4) Then "if ((size >= (PAGE_SIZE >> 3))" test will be satisfied and
          "flags |= CFLGS_OFF_SLAB" will be covered.
      
      (5) if (flags & CFLGS_OFF_SLAB)" test will be satisfied and will go to
          "cachep->slabp_cache = kmalloc_slab(slab_size, 0u)", and the result
          here may be NULL while kernel bootup.
      
      (6) Finally,"BUG_ON(ZERO_OR_NULL_PTR(cachep->slabp_cache));" causes the
          BUG info as the following shows (may be only mips64 has this problem):
      
      This patch fixes the problem of kmalloc_size(INDEX_NODE + 1) and removes
      the BUG by adding 'size >= 256' check to guarantee that all necessary
      small sized slabs are initialized regardless sequence of slab size in
      mapping table.
      
      Fixes: e3366016 ("slab: Use common kmalloc_index/kmalloc_size...")
      Signed-off-by: default avatarJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Reported-by: default avatarLiuhailong <liu.hailong6@zte.com.cn>
      Acked-by: default avatarChristoph Lameter <cl@linux.com>
      Cc: Pekka Enberg <penberg@kernel.org>
      Cc: David Rientjes <rientjes@google.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      2efdc7e5
    • Andy Shevchenko's avatar
      dmaengine: dw: properly read DWC_PARAMS register · f92cf18e
      Andy Shevchenko authored
      commit 6bea0f6d upstream.
      
      In case we have less than maximum allowed channels (8) and autoconfiguration is
      enabled the DWC_PARAMS read is wrong because it uses different arithmetic to
      what is needed for channel priority setup.
      
      Re-do the caclulations properly. This now works on AVR32 board well.
      
      Fixes: fed2574b (dw_dmac: introduce software emulation of LLP transfers)
      Cc: yitian.bu@tangramtek.com
      Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
      Signed-off-by: default avatarVinod Koul <vinod.koul@intel.com>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      f92cf18e
    • John Stultz's avatar
      clocksource: Fix abs() usage w/ 64bit values · 9b0cf919
      John Stultz authored
      commit 67dfae0c upstream.
      
      This patch fixes one cases where abs() was being used with 64-bit
      nanosecond values, where the result may be capped at 32-bits.
      
      This potentially could cause watchdog false negatives on 32-bit
      systems, so this patch addresses the issue by using abs64().
      Signed-off-by: default avatarJohn Stultz <john.stultz@linaro.org>
      Cc: Prarit Bhargava <prarit@redhat.com>
      Cc: Richard Cochran <richardcochran@gmail.com>
      Cc: Ingo Molnar <mingo@kernel.org>
      Link: http://lkml.kernel.org/r/1442279124-7309-2-git-send-email-john.stultz@linaro.orgSigned-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      [ luis: backported to 3.16: adjusted context ]
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      9b0cf919
    • Stephen Smalley's avatar
      x86/mm: Set NX on gap between __ex_table and rodata · 45771796
      Stephen Smalley authored
      commit ab76f7b4 upstream.
      
      Unused space between the end of __ex_table and the start of
      rodata can be left W+x in the kernel page tables.  Extend the
      setting of the NX bit to cover this gap by starting from
      text_end rather than rodata_start.
      
        Before:
        ---[ High Kernel Mapping ]---
        0xffffffff80000000-0xffffffff81000000          16M                               pmd
        0xffffffff81000000-0xffffffff81600000           6M     ro         PSE     GLB x  pmd
        0xffffffff81600000-0xffffffff81754000        1360K     ro                 GLB x  pte
        0xffffffff81754000-0xffffffff81800000         688K     RW                 GLB x  pte
        0xffffffff81800000-0xffffffff81a00000           2M     ro         PSE     GLB NX pmd
        0xffffffff81a00000-0xffffffff81b3b000        1260K     ro                 GLB NX pte
        0xffffffff81b3b000-0xffffffff82000000        4884K     RW                 GLB NX pte
        0xffffffff82000000-0xffffffff82200000           2M     RW         PSE     GLB NX pmd
        0xffffffff82200000-0xffffffffa0000000         478M                               pmd
      
        After:
        ---[ High Kernel Mapping ]---
        0xffffffff80000000-0xffffffff81000000          16M                               pmd
        0xffffffff81000000-0xffffffff81600000           6M     ro         PSE     GLB x  pmd
        0xffffffff81600000-0xffffffff81754000        1360K     ro                 GLB x  pte
        0xffffffff81754000-0xffffffff81800000         688K     RW                 GLB NX pte
        0xffffffff81800000-0xffffffff81a00000           2M     ro         PSE     GLB NX pmd
        0xffffffff81a00000-0xffffffff81b3b000        1260K     ro                 GLB NX pte
        0xffffffff81b3b000-0xffffffff82000000        4884K     RW                 GLB NX pte
        0xffffffff82000000-0xffffffff82200000           2M     RW         PSE     GLB NX pmd
        0xffffffff82200000-0xffffffffa0000000         478M                               pmd
      Signed-off-by: default avatarStephen Smalley <sds@tycho.nsa.gov>
      Acked-by: default avatarKees Cook <keescook@chromium.org>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: linux-kernel@vger.kernel.org
      Link: http://lkml.kernel.org/r/1443704662-3138-1-git-send-email-sds@tycho.nsa.govSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      45771796
    • Mel Gorman's avatar
      mm: hugetlbfs: skip shared VMAs when unmapping private pages to satisfy a fault · f8d164d4
      Mel Gorman authored
      commit 2f84a899 upstream.
      
      SunDong reported the following on
      
        https://bugzilla.kernel.org/show_bug.cgi?id=103841
      
      	I think I find a linux bug, I have the test cases is constructed. I
      	can stable recurring problems in fedora22(4.0.4) kernel version,
      	arch for x86_64.  I construct transparent huge page, when the parent
      	and child process with MAP_SHARE, MAP_PRIVATE way to access the same
      	huge page area, it has the opportunity to lead to huge page copy on
      	write failure, and then it will munmap the child corresponding mmap
      	area, but then the child mmap area with VM_MAYSHARE attributes, child
      	process munmap this area can trigger VM_BUG_ON in set_vma_resv_flags
      	functions (vma - > vm_flags & VM_MAYSHARE).
      
      There were a number of problems with the report (e.g.  it's hugetlbfs that
      triggers this, not transparent huge pages) but it was fundamentally
      correct in that a VM_BUG_ON in set_vma_resv_flags() can be triggered that
      looks like this
      
      	 vma ffff8804651fd0d0 start 00007fc474e00000 end 00007fc475e00000
      	 next ffff8804651fd018 prev ffff8804651fd188 mm ffff88046b1b1800
      	 prot 8000000000000027 anon_vma           (null) vm_ops ffffffff8182a7a0
      	 pgoff 0 file ffff88106bdb9800 private_data           (null)
      	 flags: 0x84400fb(read|write|shared|mayread|maywrite|mayexec|mayshare|dontexpand|hugetlb)
      	 ------------
      	 kernel BUG at mm/hugetlb.c:462!
      	 SMP
      	 Modules linked in: xt_pkttype xt_LOG xt_limit [..]
      	 CPU: 38 PID: 26839 Comm: map Not tainted 4.0.4-default #1
      	 Hardware name: Dell Inc. PowerEdge R810/0TT6JF, BIOS 2.7.4 04/26/2012
      	 set_vma_resv_flags+0x2d/0x30
      
      The VM_BUG_ON is correct because private and shared mappings have
      different reservation accounting but the warning clearly shows that the
      VMA is shared.
      
      When a private COW fails to allocate a new page then only the process
      that created the VMA gets the page -- all the children unmap the page.
      If the children access that data in the future then they get killed.
      
      The problem is that the same file is mapped shared and private.  During
      the COW, the allocation fails, the VMAs are traversed to unmap the other
      private pages but a shared VMA is found and the bug is triggered.  This
      patch identifies such VMAs and skips them.
      Signed-off-by: default avatarMel Gorman <mgorman@techsingularity.net>
      Reported-by: default avatarSunDong <sund_sky@126.com>
      Reviewed-by: default avatarMichal Hocko <mhocko@suse.com>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: Hugh Dickins <hughd@google.com>
      Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: David Rientjes <rientjes@google.com>
      Reviewed-by: default avatarNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      f8d164d4
    • Dirk Müller's avatar
      Use WARN_ON_ONCE for missing X86_FEATURE_NRIPS · 0436b7e1
      Dirk Müller authored
      commit d2922422 upstream.
      
      The cpu feature flags are not ever going to change, so warning
      everytime can cause a lot of kernel log spam
      (in our case more than 10GB/hour).
      
      The warning seems to only occur when nested virtualization is
      enabled, so it's probably triggered by a KVM bug.  This is a
      sensible and safe change anyway, and the KVM bug fix might not
      be suitable for stable releases anyway.
      Signed-off-by: default avatarDirk Mueller <dmueller@suse.com>
      Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      0436b7e1
    • Matt Fleming's avatar
      x86/efi: Fix boot crash by mapping EFI memmap entries bottom-up at runtime, instead of top-down · 6d149d78
      Matt Fleming authored
      commit a5caa209 upstream.
      
      Beginning with UEFI v2.5 EFI_PROPERTIES_TABLE was introduced
      that signals that the firmware PE/COFF loader supports splitting
      code and data sections of PE/COFF images into separate EFI
      memory map entries. This allows the kernel to map those regions
      with strict memory protections, e.g. EFI_MEMORY_RO for code,
      EFI_MEMORY_XP for data, etc.
      
      Unfortunately, an unwritten requirement of this new feature is
      that the regions need to be mapped with the same offsets
      relative to each other as observed in the EFI memory map. If
      this is not done crashes like this may occur,
      
        BUG: unable to handle kernel paging request at fffffffefe6086dd
        IP: [<fffffffefe6086dd>] 0xfffffffefe6086dd
        Call Trace:
         [<ffffffff8104c90e>] efi_call+0x7e/0x100
         [<ffffffff81602091>] ? virt_efi_set_variable+0x61/0x90
         [<ffffffff8104c583>] efi_delete_dummy_variable+0x63/0x70
         [<ffffffff81f4e4aa>] efi_enter_virtual_mode+0x383/0x392
         [<ffffffff81f37e1b>] start_kernel+0x38a/0x417
         [<ffffffff81f37495>] x86_64_start_reservations+0x2a/0x2c
         [<ffffffff81f37582>] x86_64_start_kernel+0xeb/0xef
      
      Here 0xfffffffefe6086dd refers to an address the firmware
      expects to be mapped but which the OS never claimed was mapped.
      The issue is that included in these regions are relative
      addresses to other regions which were emitted by the firmware
      toolchain before the "splitting" of sections occurred at
      runtime.
      
      Needless to say, we don't satisfy this unwritten requirement on
      x86_64 and instead map the EFI memory map entries in reverse
      order. The above crash is almost certainly triggerable with any
      kernel newer than v3.13 because that's when we rewrote the EFI
      runtime region mapping code, in commit d2f7cbe7 ("x86/efi:
      Runtime services virtual mapping"). For kernel versions before
      v3.13 things may work by pure luck depending on the
      fragmentation of the kernel virtual address space at the time we
      map the EFI regions.
      
      Instead of mapping the EFI memory map entries in reverse order,
      where entry N has a higher virtual address than entry N+1, map
      them in the same order as they appear in the EFI memory map to
      preserve this relative offset between regions.
      
      This patch has been kept as small as possible with the intention
      that it should be applied aggressively to stable and
      distribution kernels. It is very much a bugfix rather than
      support for a new feature, since when EFI_PROPERTIES_TABLE is
      enabled we must map things as outlined above to even boot - we
      have no way of asking the firmware not to split the code/data
      regions.
      
      In fact, this patch doesn't even make use of the more strict
      memory protections available in UEFI v2.5. That will come later.
      Suggested-by: default avatarArd Biesheuvel <ard.biesheuvel@linaro.org>
      Reported-by: default avatarArd Biesheuvel <ard.biesheuvel@linaro.org>
      Signed-off-by: default avatarMatt Fleming <matt.fleming@intel.com>
      Cc: Borislav Petkov <bp@suse.de>
      Cc: Chun-Yi <jlee@suse.com>
      Cc: Dave Young <dyoung@redhat.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: James Bottomley <JBottomley@Odin.com>
      Cc: Lee, Chun-Yi <jlee@suse.com>
      Cc: Leif Lindholm <leif.lindholm@linaro.org>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Matthew Garrett <mjg59@srcf.ucam.org>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Jones <pjones@redhat.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: linux-kernel@vger.kernel.org
      Link: http://lkml.kernel.org/r/1443218539-7610-2-git-send-email-matt@codeblueprint.co.ukSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      6d149d78
    • Ben Hutchings's avatar
      genirq: Fix race in register_irq_proc() · 0eb16874
      Ben Hutchings authored
      commit 95c2b175 upstream.
      
      Per-IRQ directories in procfs are created only when a handler is first
      added to the irqdesc, not when the irqdesc is created.  In the case of
      a shared IRQ, multiple tasks can race to create a directory.  This
      race condition seems to have been present forever, but is easier to
      hit with async probing.
      Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      Link: http://lkml.kernel.org/r/1443266636.2004.2.camel@decadent.org.ukSigned-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      0eb16874
    • Fabiano Fidêncio's avatar
      drm/qxl: recreate the primary surface when the bo is not primary · 489abfce
      Fabiano Fidêncio authored
      commit 8d0d9401 upstream.
      
      When disabling/enabling a crtc the primary area must be updated
      independently of which crtc has been disabled/enabled.
      
      Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1264735Signed-off-by: default avatarFabiano Fidêncio <fidencio@redhat.com>
      Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      489abfce
    • Linus Torvalds's avatar
      Initialize msg/shm IPC objects before doing ipc_addid() · 792d3057
      Linus Torvalds authored
      commit b9a53227 upstream.
      
      As reported by Dmitry Vyukov, we really shouldn't do ipc_addid() before
      having initialized the IPC object state.  Yes, we initialize the IPC
      object in a locked state, but with all the lockless RCU lookup work,
      that IPC object lock no longer means that the state cannot be seen.
      
      We already did this for the IPC semaphore code (see commit e8577d1f:
      "ipc/sem.c: fully initialize sem_array before making it visible") but we
      clearly forgot about msg and shm.
      Reported-by: default avatarDmitry Vyukov <dvyukov@google.com>
      Cc: Manfred Spraul <manfred@colorfullife.com>
      Cc: Davidlohr Bueso <dbueso@suse.de>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      [ luis: backported to 3.16: adjusted context ]
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      792d3057
    • Paul Burton's avatar
      MIPS: CPS: #ifdef on CONFIG_MIPS_MT_SMP rather than CONFIG_MIPS_MT · 1e65ce65
      Paul Burton authored
      commit 7a63076d upstream.
      
      The CONFIG_MIPS_MT symbol can be selected by CONFIG_MIPS_VPE_LOADER in
      addition to CONFIG_MIPS_MT_SMP. We only want MT code in the CPS SMP boot
      vector if we're using MT for SMP. Thus switch the config symbol we ifdef
      against to CONFIG_MIPS_MT_SMP.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: linux-kernel@vger.kernel.org
      Patchwork: https://patchwork.linux-mips.org/patch/10867/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      [ luis: backported to 3.16: adjusted context ]
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      1e65ce65
    • Paul Burton's avatar
      MIPS: CPS: Don't include MT code in non-MT kernels. · fe76180c
      Paul Burton authored
      commit a5b0f6db upstream.
      
      The MT-specific code in mips_cps_boot_vpes can safely be omitted from
      kernels which don't support MT, with the default VPE==0 case being used
      as it would be after the has_mt (Config3.MT) check failed at runtime.
      Discarding the code entirely will save us a few bytes & allow cleaner
      handling of MT ASE instructions by later patches.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: linux-kernel@vger.kernel.org
      Patchwork: https://patchwork.linux-mips.org/patch/10866/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      [ luis: backported to 3.16: adjusted context ]
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      fe76180c
    • Paul Burton's avatar
      MIPS: CPS: Stop dangling delay slot from has_mt. · dde7288f
      Paul Burton authored
      commit 1e5fb282 upstream.
      
      The has_mt macro ended with a branch, leaving its callers with a delay
      slot that would be executed if Config3.MT is not set. However it would
      not be executed if Config3 (or earlier Config registers) don't exist
      which makes it somewhat inconsistent at best. Fill the delay slot in the
      macro & fix the mips_cps_boot_vpes caller appropriately.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: linux-kernel@vger.kernel.org
      Patchwork: https://patchwork.linux-mips.org/patch/10865/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      [ luis: backported to 3.16: adjusted context ]
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      dde7288f
    • James Hogan's avatar
      MIPS: dma-default: Fix 32-bit fall back to GFP_DMA · 99c6cedf
      James Hogan authored
      commit 53960059 upstream.
      
      If there is a DMA zone (usually 24bit = 16MB I believe), but no DMA32
      zone, as is the case for some 32-bit kernels, then massage_gfp_flags()
      will cause DMA memory allocated for devices with a 32..63-bit
      coherent_dma_mask to fall back to using __GFP_DMA, even though there may
      only be 32-bits of physical address available anyway.
      
      Correct that case to compare against a mask the size of phys_addr_t
      instead of always using a 64-bit mask.
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Fixes: a2e715a8 ("MIPS: DMA: Fix computation of DMA flags from device's coherent_dma_mask.")
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/9610/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      99c6cedf
  2. 19 Oct, 2015 4 commits