The remote processor messaging (rpmsg) subsystem provides an interface
to communicate with other remote processors. On many Qualcomm SoCs this
is used to communicate with an integrated modem DSP that implements most
of the modem functionality and provides high-level protocols like
QMI or AT to allow controlling the modem.

For QMI, most older Qualcomm SoCs (e.g. MSM8916/MSM8974) have
a standalone "DATA5_CNTL" channel that allows exchanging QMI messages.
Note that newer SoCs (e.g. SDM845) only allow exchanging QMI messages
via a shared QRTR channel that is available via a socket API on Linux.

For AT, the "DATA4" channel accepts at least a limited set of AT
commands, on many older and newer Qualcomm SoCs, although QMI is
typically the preferred control protocol.

Often there are additional QMI/AT channels (usually named DATA*_CNTL
for QMI and DATA* for AT), but it is not clear if those are really
functional on all devices. Also, at the moment there is no use case
for having multiple QMI/AT ports. If needed more channels could be
added later after more testing.

Note that the data path (network interface) is entirely separate
from the control path and varies between Qualcomm SoCs, e.g. "IPA"
on newer Qualcomm SoCs or "BAM-DMUX" on some older ones.

The RPMSG WWAN CTRL driver exposes the QMI/AT control ports via the
WWAN subsystem, and therefore allows userspace like ModemManager to
set up the modem. Until now, ModemManager had to use the RPMSG-specific
rpmsg-char where the channels must be explicitly exposed as a char
device first and don't show up directly in sysfs.

The driver is a fairly simple glue layer between WWAN and RPMSG
and is mostly based on the existing mhi_wwan_ctrl.c and rpmsg_char.c.

Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Most device_id structs provide a driver_data field that can be used
by drivers to associate data more easily for a particular device ID.
Add the same for the rpmsg_device_id.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jesse Brandeburg says:

====================
100GbE Intel Wired LAN Driver Updates 2021-06-18

Update three of the Intel Ethernet drivers with similar (but not the
same) improvements to simplify the packet type table init, while removing
an unused structure entry. For the ice driver, the table is extended
to 10 bits, which is the hardware limit, and for now is initialized
to zero.

The end result is slightly reduced memory usage, removal of a bunch
of code, and more specific initialization.
====================
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>

This reverts commit 1f3c98ea.

Does not build...
Signed-off-by: David S. Miller <davem@davemloft.net>

Modify the pr_info content from int to char *, this looks more readable.
Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Stefano Garzarella says:

====================
vsock: small fixes for seqpacket support

This series contains few patches to clean up a bit the code
of seqpacket recently merged in the net-next tree.

No functionality changes.
====================
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>

When memcpy_to_msg() fails in virtio_transport_seqpacket_do_dequeue(),
we already set `dequeued_len` with the negative error value returned
by memcpy_to_msg().

So we can directly check `dequeued_len` value instead of using a
dedicated flag variable to skip the copy path for the rest of
fragments.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vsock_wait_data() is used only by STREAM and SEQPACKET sockets,
so let's rename it to vsock_connectible_wait_data(), using the same
nomenclature (connectible) used in other functions after the
introduction of SEQPACKET.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vsock_has_data() is used only by STREAM and SEQPACKET sockets,
so let's rename it to vsock_connectible_has_data(), using the same
nomenclature (connectible) used in other functions after the
introduction of SEQPACKET.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove unnecessary label chunk_exit and return directly.
Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If reloading the static config fails for whatever reason, for example if
sja1105_static_config_check_valid() fails, then we "goto out_unlock_ptp"
but we print anyway that "Reset switch and programmed static config.",
which is confusing because we didn't. We also do a bunch of other stuff
like reprogram the XPCS and reload the credit-based shapers, as if a
switch reset took place, which didn't.

So just unlock the PTP lock and goto out, skipping all of that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently sja1105_static_config_check_valid() is coded up to detect
whether TTEthernet is supported based on device ID, and this check was
not updated to cover SJA1110.

However, it is desirable to have as few checks for the device ID as
possible, so the driver core is more generic. So what we can do is look
at the static config table operations implemented by that specific
switch family (populated by sja1105_static_config_init) whether the
schedule table has a non-zero maximum entry count (meaning that it is
supported) or not.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the current rx page reuse handling process, the rx page buffer may
have conflict between driver and stack in high-pressure scenario.

To fix this problem, we need to check whether the page is only owned
by driver at the begin and at the end of a page to make sure there is
no reuse conflict between driver and stack when desc_cb->page_offset
is rollbacked to zero or increased.

Fixes: fa7711b8 ("net: hns3: optimize the rx page reuse handling process")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It turns out that powering down the BASE_TIMER_CLK does not turn off the
microcontroller, just its timers, including the one for the watchdog.
So the embedded microcontroller is still running, and potentially still
doing things.

To prevent unwanted interference, we should power down the BASE_MCSS_CLK
as well (MCSS = microcontroller subsystem).

The trouble is that currently we turn off the BASE_TIMER_CLK for SJA1110
from the .clocking_setup() method, mostly because this is a Clock
Generation Unit (CGU) setting which was traditionally configured in that
method for SJA1105. But in SJA1105, the CGU was used for bringing up the
port clocks at the proper speeds, and in SJA1110 it's not (but rather
for initial configuration), so it's best that we rebrand the
sja1110_clocking_setup() method into what it really is - an implementation
of the .disable_microcontroller() method.

Since disabling the microcontroller only needs to be done once, at probe
time, we can choose the best place to do that as being in sja1105_setup(),
before we upload the static config to the device. This guarantees that
the static config being used by the switch afterwards is really ours.

Note that the procedure to upload a static config necessarily resets the
switch. This already did not reset the microcontroller, only the switch
core, so since the .disable_microcontroller() method is guaranteed to be
called by that point, if it's disabled, it remains disabled. Add a
comment to make that clear.

With the code movement for SJA1110 from .clocking_setup() to
.disable_microcontroller(), both methods are optional and are guarded by
"if" conditions.

Tested by enabling in the device tree the rev-mii switch port 0 that
goes towards the microcontroller, and flashing a firmware that would
have networking. Without this patch, the microcontroller can be pinged,
with this patch it cannot.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The continue statement at the end of a for-loop has no effect,
it is redundant and can be removed.

Addresses-Coverity: ("Continue has no effect")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The continue statement at the end of a for-loop has no effect,
invert the if expression and remove the continue.

Addresses-Coverity: ("Continue has no effect")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The continue statement in the for-loop has no effect, remove it.

Addresses-Coverity: ("Continue has no effect")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 0571a753 cancelled delayed work too late, keeping small
race. Cancel work sooner to close it completely.
Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>
Fixes: 0571a753 ("net: pxa168_eth: Fix a potential data race in pxa168_eth_remove")
Signed-off-by: David S. Miller <davem@davemloft.net>

Simplify the code by removing unnecessary labels and returning directly.
Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simplify the return expression in the rvu_npc_fs.c
Signed-off-by: dingsenjie <dingsenjie@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Modify the label out_err to out to avoid the meanless kfree.
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently UDP tunnel devices on top of VLANs lose the ability
to offload UDP GSO. Widen the pass thru features from TSO
to all GSO_SOFTWARE.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the dwmac bindings for the Loongson-2K SoC and the LS7A
bridge chip.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

The GMAC module is now supported, enable it.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

The GMAC module is now supported, enable it.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

This GMAC module is integrated into the Loongson-2K SoC and the LS7A
bridge chip.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Peng Li says:

====================
net: hostess_sv11: clean up some code style issues

This patchset clean up some code style issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Alignment should match open parenthesis.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Networking block comments don't use an empty /* line,
use /* Comment...

Block comments use * on subsequent lines.
Block comments use a trailing */ on a separate line.

This patch fixes the comments style issues.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch removes the dead code.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to the chackpatch.pl,
switch and case should be at the same indent.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch removes trailing whitespace.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Should not use assignment in if condition.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the checkpatch error as "foo* bar" should be "foo *bar".
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mat Martineau says:

====================
mptcp: DSS checksum support

RFC 8684 defines a DSS checksum feature that allows MPTCP to detect
middlebox interference with the MPTCP DSS header and the portion of the
data stream associated with that header. So far, the MPTCP
implementation in the Linux kernel has not supported this feature.

This patch series adds DSS checksum support. By default, the kernel will
not request checksums when sending SYN or SYN/ACK packets for MPTCP
connections. Outgoing checksum requests can be enabled with a
per-namespace net.mptcp.checksum_enabled sysctl. MPTCP connections will
now proceed with DSS checksums when the peer requests them, whether the
sysctl is enabled or not.

Patches 1-5 add checksum bits to the outgoing SYN, SYN/ACK, and data
packet headers. This includes calculating the checksum using a range of
data and the MPTCP DSS mapping for that data.

Patches 6-10 handle the checksum request in the SYN or SYN/ACK, and
receiving and verifying the DSS checksum on data packets.

Patch 11 adjusts the MPTCP-level retransmission process for checksum
compatibility.

Patches 12-14 add checksum-related MIBs, the net.mptcp.checksum_enabled
sysctl, and a checksum field to debug trace output.

Patches 15 & 16 add selftests.

The series is slightly longer than the preferred 15-patch limit that
patchwork warns about. I do try to stay below that whenever possible -
this series does implement one feature and is, I think, cohesive enough
to justify keeping it together. If it's at all problematic please let me
know!

A trivial merge conflict with net/master is introduced in patch 15: a
commit in net/master removes a couple of nearby lines of code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch added a new argument "-C" for the mptcp_join.sh script to set
the sysctl checksum_enabled to 1 in ns1 and ns2 to enable the data
checksum.

In chk_join_nr, check the counter of the mib for the data checksum.

Also added a new argument "-S" for the mptcp_join.sh script to start the
test cases that verify the checksum handshake:

  * Sender and listener both have checksums off
  * Sender and listener both have checksums on
  * Sender checksums off, listener checksums on
  * Sender checksums on, listener checksums off

The output looks like this:

 01 checksum test 0 0                  sum[ ok ] - csum  [ ok ]
 02 checksum test 1 1                  sum[ ok ] - csum  [ ok ]
 03 checksum test 0 1                  sum[ ok ] - csum  [ ok ]
 04 checksum test 1 0                  sum[ ok ] - csum  [ ok ]
 05 no JOIN                            syn[ ok ] - synack[ ok ] - ack[ ok ]
                                       sum[ ok ] - csum  [ ok ]
 06 single subflow, limited by client  syn[ ok ] - synack[ ok ] - ack[ ok ]
                                       sum[ ok ] - csum  [ ok ]
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch added a new argument "-C" for the mptcp_connect.sh script to
set the sysctl checksum_enabled to 1 in ns1, ns2, ns3 and ns4 to enable
the data checksum.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In mptcp_dump_mpext, dump the csum fields, csum and csum_reqd in struct
mptcp_dump_mpext too.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch added a new sysctl, named checksum_enabled, to control
whether DSS checksum can be enabled.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch added the mib for the data checksum, MPTCP_MIB_DATACSUMERR.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>