- 07 Mar, 2024 13 commits
-
-
Anjelique Melendez authored
On PMICs such as PM8350C, the pattern lookup table (LUT) is stored in a separate SDAM from the one where the lpg per-channel data is stored. Add support for PPG with a dedicated LUT SDAM while maintaining backward compatibility for those targets that use only a single SDAM. Co-developed-by:
Guru Das Srinagesh <quic_gurus@quicinc.com> Signed-off-by:
Anjelique Melendez <quic_amelende@quicinc.com> Link: https://lore.kernel.org/r/20231221185838.28440-7-quic_amelende@quicinc.comSigned-off-by:
Lee Jones <lee@kernel.org>
-
Anjelique Melendez authored
Update the pmi632 lpg_data struct so that pmi632 devices use PPG for LUT pattern. Signed-off-by:
Luca Weiss <luca.weiss@fairphone.com> Link: https://lore.kernel.org/r/20231221185838.28440-6-quic_amelende@quicinc.comSigned-off-by:
-
Anjelique Melendez authored
In some PMICs like pmi632, the pattern look up table (LUT) and LPG configuration is stored in a single SDAM module instead of LUT peripheral. This feature is called PPG. PPG uses Qualcomm Programmable Boot Sequencer (PBS) inorder to trigger pattern sequences for PMICs. Signed-off-by:
-
Anjelique Melendez authored
Update leds-qcom-lpg binding to support LPG PPG. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231221185838.28440-3-quic_amelende@quicinc.comSigned-off-by:
-
Heiner Kallweit authored
The current codes uses the sw_control path in set_baseline_state() when called from netdev_trig_activate() even if we're hw-controlled. This may result in errors when led_set_brightness() is called because we may not have set_brightness led ops (if hw doesn't support setting a "LED" to ON). In addition this path may schedule trigger_data->work which doesn't make sense when being hw-controlled. Therefore set trigger_data->hw_control = true before calling set_device_name() from netdev_trig_activate(). In this call chain we have to prevent set_baseline_state() from being called, because this would call hw_control_set(). Use led_cdev->trigger_data == NULL as indicator for being called from netdev_trig_activate(). Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/d3f2859c-2673-401c-a4f7-fcaef2167991@gmail.comSigned-off-by:
-
Lee Jones authored
-
Andy Shevchenko authored
Update header inclusions to follow IWYU (Include What You Use) principle. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Duje Mihanović <duje.mihanovic@skole.hr> Link: https://lore.kernel.org/r/20240223203010.881065-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Arnd Bergmann authored
The expresswire module requires gpiolib, so anything selecting it also needs this dependency: WARNING: unmet direct dependencies detected for LEDS_EXPRESSWIRE Depends on [n]: NEW_LEDS [=y] && GPIOLIB [=n] Selected by [y]: - LEDS_KTD2692 [=y] && NEW_LEDS [=y] && LEDS_CLASS_FLASH [=y] && OF [=y] Fixes: e59a15af7aa6 ("leds: ktd2692: Convert to use ExpressWire library") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Daniel Thompson <daniel.thompson@linaro.org> Link: https://lore.kernel.org/r/20240213165602.2230970-1-arnd@kernel.orgSigned-off-by:
-
Duje Mihanović authored
The struct containing the KTD2801 timing can be made static as it's not referenced outside the KTD2801 driver. Do this to prevent sparse complaints. Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202402100625.M0RkJhMh-lkp@intel.com/Signed-off-by:
-
Duje Mihanović authored
KTD2801 is a LED backlight driver IC found in samsung,coreprimevelte. The brightness can be set using PWM or the ExpressWire protocol. Add support for the KTD2801. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
Duje Mihanović authored
KTD2801 is a LED backlight driver IC found in samsung,coreprimevelte. The brightness can be set using PWM or the ExpressWire protocol. Add a DT binding for the KTD2801. Reviewed-by:
-
Duje Mihanović authored
The KTD2692 uses the ExpressWire protocol implemented in the newly introduced ExpressWire library. Convert the driver to use the library. Suggested-by:
-
Duje Mihanović authored
The ExpressWire protocol is shared between at least KTD2692 and KTD2801 with slight differences such as timings and the former not having a defined set of pulses for enabling the protocol (possibly because it does not support PWM unlike KTD2801). Despite these differences the ExpressWire handling code can be shared between the two, so in preparation for adding KTD2801 support introduce a library implementing this protocol. Suggested-by:
-
- 01 Feb, 2024 2 commits
-
-
Anjelique Melendez authored
Add the Qualcomm PBS (Programmable Boot Sequencer) driver. The QCOM PBS driver supports configuring software PBS trigger events through PBS RAM on Qualcomm Technologies, Inc (QTI) PMICs. Signed-off-by:
Bjorn Andersson <andersson@kernel.org>
-
Anjelique Melendez authored
Add binding for the Qualcomm Programmable Boot Sequencer device. Signed-off-by:
-
- 21 Jan, 2024 25 commits
-
-
Linus Torvalds authored
-
https://evilpiepirate.org/git/bcachefsLinus Torvalds authored
Pull more bcachefs updates from Kent Overstreet: "Some fixes, Some refactoring, some minor features: - Assorted prep work for disk space accounting rewrite - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this makes our trigger context more explicit - A few fixes to avoid excessive transaction restarts on multithreaded workloads: fstests (in addition to ktest tests) are now checking slowpath counters, and that's shaking out a few bugs - Assorted tracepoint improvements - Starting to break up bcachefs_format.h and move on disk types so they're with the code they belong to; this will make room to start documenting the on disk format better. - A few minor fixes" * tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits) bcachefs: Improve inode_to_text() bcachefs: logged_ops_format.h bcachefs: reflink_format.h bcachefs; extents_format.h bcachefs: ec_format.h bcachefs: subvolume_format.h bcachefs: snapshot_format.h bcachefs: alloc_background_format.h bcachefs: xattr_format.h bcachefs: dirent_format.h bcachefs: inode_format.h bcachefs; quota_format.h bcachefs: sb-counters_format.h bcachefs: counters.c -> sb-counters.c bcachefs: comment bch_subvolume bcachefs: bch_snapshot::btime bcachefs: add missing __GFP_NOWARN bcachefs: opts->compression can now also be applied in the background bcachefs: Prep work for variable size btree node buffers bcachefs: grab s_umount only if snapshotting ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer updates from Thomas Gleixner: "Updates for time and clocksources: - A fix for the idle and iowait time accounting vs CPU hotplug. The time is reset on CPU hotplug which makes the accumulated systemwide time jump backwards. - Assorted fixes and improvements for clocksource/event drivers" * tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug clocksource/drivers/ep93xx: Fix error handling during probe clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings clocksource/timer-riscv: Add riscv_clock_shutdown callback dt-bindings: timer: Add StarFive JH8100 clint dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs -
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Aneesh Kumar: - Increase default stack size to 32KB for Book3S Thanks to Michael Ellerman. * tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Increase default stack size to 32KB
-
Kent Overstreet authored
Add line breaks - inode_to_text() is now much easier to read. Signed-off-by:Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
bcachefs_format.h has gotten too big; let's do some organizing. Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Add a field to bch_snapshot for creation time; this will be important when we start exposing the snapshot tree to userspace. Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
The "apply this compression method in the background" paths now use the compression option if background_compression is not set; this means that setting or changing the compression option will cause existing data to be compressed accordingly in the background. Signed-off-by: -
Kent Overstreet authored
bcachefs btree nodes are big - typically 256k - and btree roots are pinned in memory. As we're now up to 18 btrees, we now have significant memory overhead in mostly empty btree roots. And in the future we're going to start enforcing that certain btree node boundaries exist, to solve lock contention issues - analagous to XFS's AGIs. Thus, we need to start allocating smaller btree node buffers when we can. This patch changes code that refers to the filesystem constant c->opts.btree_node_size to refer to the btree node buffer size - btree_buf_bytes() - where appropriate. Signed-off-by: -
Su Yue authored
When I was testing mongodb over bcachefs with compression, there is a lockdep warning when snapshotting mongodb data volume. $ cat test.sh prog=bcachefs $prog subvolume create /mnt/data $prog subvolume create /mnt/data/snapshots while true;do $prog subvolume snapshot /mnt/data /mnt/data/snapshots/$(date +%s) sleep 1s done $ cat /etc/mongodb.conf systemLog: destination: file logAppend: true path: /mnt/data/mongod.log storage: dbPath: /mnt/data/ lockdep reports: [ 3437.452330] ====================================================== [ 3437.452750] WARNING: possible circular locking dependency detected [ 3437.453168] 6.7.0-rc7-custom+ #85 Tainted: G E [ 3437.453562] ------------------------------------------------------ [ 3437.453981] bcachefs/35533 is trying to acquire lock: [ 3437.454325] ffffa0a02b2b1418 (sb_writers#10){.+.+}-{0:0}, at: filename_create+0x62/0x190 [ 3437.454875] but task is already holding lock: [ 3437.455268] ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.456009] which lock already depends on the new lock. [ 3437.456553] the existing dependency chain (in reverse order) is: [ 3437.457054] -> #3 (&type->s_umount_key#48){.+.+}-{3:3}: [ 3437.457507] down_read+0x3e/0x170 [ 3437.457772] bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.458206] __x64_sys_ioctl+0x93/0xd0 [ 3437.458498] do_syscall_64+0x42/0xf0 [ 3437.458779] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.459155] -> #2 (&c->snapshot_create_lock){++++}-{3:3}: [ 3437.459615] down_read+0x3e/0x170 [ 3437.459878] bch2_truncate+0x82/0x110 [bcachefs] [ 3437.460276] bchfs_truncate+0x254/0x3c0 [bcachefs] [ 3437.460686] notify_change+0x1f1/0x4a0 [ 3437.461283] do_truncate+0x7f/0xd0 [ 3437.461555] path_openat+0xa57/0xce0 [ 3437.461836] do_filp_open+0xb4/0x160 [ 3437.462116] do_sys_openat2+0x91/0xc0 [ 3437.462402] __x64_sys_openat+0x53/0xa0 [ 3437.462701] do_syscall_64+0x42/0xf0 [ 3437.462982] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.463359] -> #1 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}: [ 3437.463843] down_write+0x3b/0xc0 [ 3437.464223] bch2_write_iter+0x5b/0xcc0 [bcachefs] [ 3437.464493] vfs_write+0x21b/0x4c0 [ 3437.464653] ksys_write+0x69/0xf0 [ 3437.464839] do_syscall_64+0x42/0xf0 [ 3437.465009] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.465231] -> #0 (sb_writers#10){.+.+}-{0:0}: [ 3437.465471] __lock_acquire+0x1455/0x21b0 [ 3437.465656] lock_acquire+0xc6/0x2b0 [ 3437.465822] mnt_want_write+0x46/0x1a0 [ 3437.465996] filename_create+0x62/0x190 [ 3437.466175] user_path_create+0x2d/0x50 [ 3437.466352] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs] [ 3437.466617] __x64_sys_ioctl+0x93/0xd0 [ 3437.466791] do_syscall_64+0x42/0xf0 [ 3437.466957] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.467180] other info that might help us debug this: [ 3437.469670] 2 locks held by bcachefs/35533: other info that might help us debug this: [ 3437.467507] Chain exists of: sb_writers#10 --> &c->snapshot_create_lock --> &type->s_umount_key#48 [ 3437.467979] Possible unsafe locking scenario: [ 3437.468223] CPU0 CPU1 [ 3437.468405] ---- ---- [ 3437.468585] rlock(&type->s_umount_key#48); [ 3437.468758] lock(&c->snapshot_create_lock); [ 3437.469030] lock(&type->s_umount_key#48); [ 3437.469291] rlock(sb_writers#10); [ 3437.469434] *** DEADLOCK *** [ 3437.469670] 2 locks held by bcachefs/35533: [ 3437.469838] #0: ffffa0a02ce00a88 (&c->snapshot_create_lock){++++}-{3:3}, at: bch2_fs_file_ioctl+0x1e3/0xc90 [bcachefs] [ 3437.470294] #1: ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.470744] stack backtrace: [ 3437.470922] CPU: 7 PID: 35533 Comm: bcachefs Kdump: loaded Tainted: G E 6.7.0-rc7-custom+ #85 [ 3437.471313] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 3437.471694] Call Trace: [ 3437.471795] <TASK> [ 3437.471884] dump_stack_lvl+0x57/0x90 [ 3437.472035] check_noncircular+0x132/0x150 [ 3437.472202] __lock_acquire+0x1455/0x21b0 [ 3437.472369] lock_acquire+0xc6/0x2b0 [ 3437.472518] ? filename_create+0x62/0x190 [ 3437.472683] ? lock_is_held_type+0x97/0x110 [ 3437.472856] mnt_want_write+0x46/0x1a0 [ 3437.473025] ? filename_create+0x62/0x190 [ 3437.473204] filename_create+0x62/0x190 [ 3437.473380] user_path_create+0x2d/0x50 [ 3437.473555] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs] [ 3437.473819] ? lock_acquire+0xc6/0x2b0 [ 3437.474002] ? __fget_files+0x2a/0x190 [ 3437.474195] ? __fget_files+0xbc/0x190 [ 3437.474380] ? lock_release+0xc5/0x270 [ 3437.474567] ? __x64_sys_ioctl+0x93/0xd0 [ 3437.474764] ? __pfx_bch2_fs_file_ioctl+0x10/0x10 [bcachefs] [ 3437.475090] __x64_sys_ioctl+0x93/0xd0 [ 3437.475277] do_syscall_64+0x42/0xf0 [ 3437.475454] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.475691] RIP: 0033:0x7f2743c313af ====================================================== In __bch2_ioctl_subvolume_create(), we grab s_umount unconditionally and unlock it at the end of the function. There is a comment "why do we need this lock?" about the lock coming from commit 42d23732 ("bcachefs: Snapshot creation, deletion") The reason is that __bch2_ioctl_subvolume_create() calls sync_inodes_sb() which enforce locked s_umount to writeback all dirty nodes before doing snapshot works. Fix it by read locking s_umount for snapshotting only and unlocking s_umount after sync_inodes_sb(). Signed-off-by:Su Yue <glass.su@suse.com> Signed-off-by:
-
Su Yue authored
bch_fs::snapshots is allocated by kvzalloc in __snapshot_t_mut. It should be freed by kvfree not kfree. Or umount will triger: [ 406.829178 ] BUG: unable to handle page fault for address: ffffe7b487148008 [ 406.830676 ] #PF: supervisor read access in kernel mode [ 406.831643 ] #PF: error_code(0x0000) - not-present page [ 406.832487 ] PGD 0 P4D 0 [ 406.832898 ] Oops: 0000 [#1] PREEMPT SMP PTI [ 406.833512 ] CPU: 2 PID: 1754 Comm: umount Kdump: loaded Tainted: G OE 6.7.0-rc7-custom+ #90 [ 406.834746 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 406.835796 ] RIP: 0010:kfree+0x62/0x140 [ 406.836197 ] Code: 80 48 01 d8 0f 82 e9 00 00 00 48 c7 c2 00 00 00 80 48 2b 15 78 9f 1f 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 56 9f 1f 01 <48> 8b 50 08 48 89 c7 f6 c2 01 0f 85 b0 00 00 00 66 90 48 8b 07 f6 [ 406.837810 ] RSP: 0018:ffffb9d641607e48 EFLAGS: 00010286 [ 406.838213 ] RAX: ffffe7b487148000 RBX: ffffb9d645200000 RCX: ffffb9d641607dc4 [ 406.838738 ] RDX: 000065bb00000000 RSI: ffffffffc0d88b84 RDI: ffffb9d645200000 [ 406.839217 ] RBP: ffff9a4625d00068 R08: 0000000000000001 R09: 0000000000000001 [ 406.839650 ] R10: 0000000000000001 R11: 000000000000001f R12: ffff9a4625d4da80 [ 406.840055 ] R13: ffff9a4625d00000 R14: ffffffffc0e2eb20 R15: 0000000000000000 [ 406.840451 ] FS: 00007f0a264ffb80(0000) GS:ffff9a4e2d500000(0000) knlGS:0000000000000000 [ 406.840851 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 406.841125 ] CR2: ffffe7b487148008 CR3: 000000018c4d2000 CR4: 00000000000006f0 [ 406.841464 ] Call Trace: [ 406.841583 ] <TASK> [ 406.841682 ] ? __die+0x1f/0x70 [ 406.841828 ] ? page_fault_oops+0x159/0x470 [ 406.842014 ] ? fixup_exception+0x22/0x310 [ 406.842198 ] ? exc_page_fault+0x1ed/0x200 [ 406.842382 ] ? asm_exc_page_fault+0x22/0x30 [ 406.842574 ] ? bch2_fs_release+0x54/0x280 [bcachefs] [ 406.842842 ] ? kfree+0x62/0x140 [ 406.842988 ] ? kfree+0x104/0x140 [ 406.843138 ] bch2_fs_release+0x54/0x280 [bcachefs] [ 406.843390 ] kobject_put+0xb7/0x170 [ 406.843552 ] deactivate_locked_super+0x2f/0xa0 [ 406.843756 ] cleanup_mnt+0xba/0x150 [ 406.843917 ] task_work_run+0x59/0xa0 [ 406.844083 ] exit_to_user_mode_prepare+0x197/0x1a0 [ 406.844302 ] syscall_exit_to_user_mode+0x16/0x40 [ 406.844510 ] do_syscall_64+0x4e/0xf0 [ 406.844675 ] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 406.844907 ] RIP: 0033:0x7f0a2664e4fb Signed-off-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
-
