- 04 Mar, 2010 40 commits
-
-
Simon Wunderlich authored
we have written "neighbors", "neighbours" and bad spelled versions of this word, this patch should make it consistent. Signed-off-by:
Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Simon Wunderlich authored
instead of dynamically registering hash iterators, calling functions are changed to register the iterator objects statically. The two advantages are: * no memory leaks when aborting from hash_iterate() * no calls to kmalloc/kfree, therefore a little faster/safer Tested with 9 QEMU instances, no obvious regression found. Signed-off-by:
-
Andrew Lunn authored
Ameya Palande requested we replace printk(KERN_DEBUG "") by pr_debug() I decided it was better to use our debug macro. Signed-off-by:
Marek Lindner <lindner_marek@yahoo.de> Signed-off-by:
-
Simon Wunderlich authored
state in the README that we also (compile) support 2.6.32 Signed-off-by:
-
Sven Eckelmann authored
It is safe to call kfree(NULL) which makes this extra check unneeded. It was found using checkpatch.pl from linux-2.6 Signed-off-by:
Sven Eckelmann <sven.eckelmann@gmx.de> Acked-by:
-
Roel Kluin authored
`i' reaches 101 after the loop, so if it was 100 then it succeeded in the last iteration. This is probably unlikely to cause problems. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Roel Kluin authored
not(!) has a higher precedence than bit and(&). Signed-off-by:
-
Jarod Wilson authored
This patch supersedes the earlier ones sent by Manu Abraham to add the Broadcom Crystal HD driver to the staging tree, per discussion with him about it. I've been working with Broadcom's Naren Sankar on this driver for a number of months, and had already talked Naren about submitting this on Broadcom's behalf, didn't expect anyone else to jump on submitting it as quickly as Manu did. ;) This version is a one-shot deal, incorporating the original driver, Manu's coding style clean-ups, udev device creation support from Edgar 'gimli' Hucek, and a number of other small tweaks from myself and Scott Davilla, the other individual who has been working closely on this code with Naren and I. I've tested this iteration of the code lightly on a mini pci-e board in a ThinkPad T61p running x86_64 Fedora 12, with the expected results, and will test further on other systems with other variants of the card (I have three varieties of this device currently in hand). Scott has also tested on assorted primarily i686 varieties of Ubuntu, and Naren has tested with both Fedora and Ubuntu, iirc. Note: only the 70012 is currently supported by this driver, 70015 support will follow later. Also note that Blu-Ray support isn't enabled (at the firmware level), due to misc fun related to the BD encryption scheme, DRM, etc. :\ I *do* have a git tree containing the driver, lib, gst plugin and firmware that I'm working from at the moment[*], as there are inter- dependencies between the driver and lib, and the driver can be used with kernels going a ways back (I've only tested back to 2.6.18 as it exists in Red Hat Enterprise Linux 5). I'm exporting from there, into a linux-next tree, then generating patches from there. The goal is to feed everything upstream as quickly as possible, but there are users who want this code for earlier kernels too... The firmware will be submitted for inclusion in dwmw2's linux-firmware tree once there is a suitable redistribution-no-modification type of license on it (I believe Naren is working with Broadcom legal to get that in place). Changelog from initial Broadcom release to here: commit d20475d444610c5683d09e63f707f5bb22359062 Author: Jarod Wilson <jarod@redhat.com> Date: Mon Jan 4 13:55:16 2010 -0500 include: lib doesn't build w/o the removed stdint include So add it back... Signed-off-by:Jarod Wilson <jarod@redhat.com> commit c181070a330530b792d2b80e3ec6ab12a5a57394 Author: Scott Davilla <davilla@4pi.com> Date: Mon Jan 4 13:38:37 2010 -0500 include: don't define VOID if its already defined Signed-off-by:
Scott Davilla <davilla@4pi.com> Signed-off-by:
Manu Abraham <abraham.manu@gmail.com> Signed-off-by:
Naren Sankar <nsankar@broadcom.com> Signed-off-by:
-
Greg Kroah-Hartman authored
No one seems to be able to maintain this, or merge it into mainline, so remove it. Acked-by:
Leon Woestenberg <leon@sidebranch.com> Signed-off-by:
-
Greg Kroah-Hartman authored
No one seems to be maintaining this anymore, and it is not on any track to be merged to mainline. Cc: Ashwin Ganti <ashwin.ganti@gmail.com> Signed-off-by: -
Greg Kroah-Hartman authored
It has no users, and no developers to maintain it to get it merged into mainline. So sad. Cc: Daniel Drake <ddrake@brontes3d.com> Cc: Justin Bronder <jsbronder@brontes3d.com> Cc: Duane Griffin <duaneg@dghda.com> Signed-off-by: -
Greg Kroah-Hartman authored
This cleans up some of the coding style issues in the .h files. More remains to be done. Cc: Scott Smedley <ss@aao.gov.au> Signed-off-by: -
Greg Kroah-Hartman authored
This fixes up the worst of the coding style errors for the allocator code. Cc: Scott Smedley <ss@aao.gov.au> Signed-off-by: -
Simon Horman authored
$ gcc --version gcc (Debian 4.4.2-5) 4.4.2 Copyright (C) 2009 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. $ make ... drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_dorequest’: drivers/staging/wlan-ng/p80211wext.c:139: warning: ‘mibitem.len’ is used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c:139: warning: ‘mibitem.status’ is used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwretry’: drivers/staging/wlan-ng/p80211wext.c:967: warning: ‘mibitem.len’ is used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c:967: warning: ‘mibitem.status’ is used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c:967: warning: ‘mibitem.data’ is used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwretry’: drivers/staging/wlan-ng/p80211wext.c:1057: warning: ‘mibitem.len’ may be used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c:1057: warning: ‘mibitem.status’ may be used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwtxpow’: drivers/staging/wlan-ng/p80211wext.c:1149: warning: ‘mibitem.len’ is used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c:1149: warning: ‘mibitem.status’ is used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c:1149: warning: ‘mibitem.data’ is used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwtxpow’: drivers/staging/wlan-ng/p80211wext.c:1123: warning: ‘mibitem.len’ may be used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c:1123: warning: ‘mibitem.status’ may be used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwfrag’: drivers/staging/wlan-ng/p80211wext.c:891: warning: ‘mibitem.len’ is used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c:891: warning: ‘mibitem.status’ is used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c:891: warning: ‘mibitem.data’ is used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwfrag’: drivers/staging/wlan-ng/p80211wext.c:933: warning: ‘mibitem.len’ may be used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c:933: warning: ‘mibitem.status’ may be used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwrts’: drivers/staging/wlan-ng/p80211wext.c:826: warning: ‘mibitem.len’ is used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c:826: warning: ‘mibitem.status’ is used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c:826: warning: ‘mibitem.data’ is used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwrts’: drivers/staging/wlan-ng/p80211wext.c:866: warning: ‘mibitem.len’ may be used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c:866: warning: ‘mibitem.status’ may be used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwrate’: drivers/staging/wlan-ng/p80211wext.c:775: warning: ‘mibitem.len’ is used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c:775: warning: ‘mibitem.status’ is used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c:775: warning: ‘mibitem.data’ is used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwfreq’: drivers/staging/wlan-ng/p80211wext.c:273: warning: ‘mibitem.len’ is used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c:273: warning: ‘mibitem.status’ is used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c:273: warning: ‘mibitem.data’ is used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwfreq’: drivers/staging/wlan-ng/p80211wext.c:320: warning: ‘mibitem.len’ may be used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwmode’: drivers/staging/wlan-ng/p80211wext.c:401: warning: ‘mibitem.len’ may be used uninitialized in this function drivers/staging/wlan-ng/p80211wext.c:401: warning: ‘mibitem.status’ may be used uninitialized in this function ... Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Simon Horman authored
The prevailing idiom is to select WIRELESS_EXT not depend on it. Depending leaves this driver in a situation where it can only be built if another driver that selects WIRELESS_EXT has been enabled. Signed-off-by:
-
Simon Horman authored
$ gcc --version gcc (Debian 4.4.2-5) 4.4.2 Copyright (C) 2009 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. $ make ... drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c: In function ‘ieee80211_rx_ADDBAReq’: drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c:342: warning: format ‘%ld’ expects type ‘long int’, but argument 3 has type ‘unsigned int’ drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c: In function ‘ieee80211_rx_ADDBARsp’: drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c:443: warning: format ‘%ld’ expects type ‘long int’, but argument 3 has type ‘unsigned int’ drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c: In function ‘ieee80211_rx_DELBA’: drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c:573: warning: format ‘%ld’ expects type ‘long int’, but argument 3 has type ‘unsigned int’ ... Also some style fixes for these lines: + Fix excessively long lines + Remove leading space before struct + Remove unnecessary parentheses Signed-off-by:
-
Simon Horman authored
The prevailing idiom is to select WIRELESS_EXT not depend on it. Depending leaves this driver in a situation where it can only be built if another driver that selects WIRELESS_EXT has been enabled. Signed-off-by:
-
Justin Madru authored
the code was looping, setting s_move[i] to the following calculations if (actual_step>= 0) s_move[i] = ((((i + 1) * gain + 0x200) - (i * gain + 0x200)) / 0x400); else s_move[i] = ((((i + 1) * gain - 0x200) - (i * gain - 0x200)) / 0x400); but, this code reduces to the expression s_move[i] = gain>> 10; The reason for the complexity was to generate a step function with integer division and rounding to land on specific values. But these calculations can be simplified to the following code: gain = ((actual_step<< 10) / 5)>> 10; for (i = 0; i<= 4; i++) s_move[i] = gain; Signed-off-by: Justin Madru<jdm64@gawab.com> Reviewed-by: Ray Lee<ray-lk@madrabbit.org> Signed-off-by: -
Pekka Enberg authored
Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Pekka Enberg authored
Acked-by:
-
Pekka Enberg authored
Acked-by:
-
Pekka Enberg authored
Acked-by:
-
Pekka Enberg authored
Acked-by:
-
Pekka Enberg authored
Acked-by:
-
Pekka Enberg authored
Acked-by:
-
Pekka Enberg authored
Acked-by:
-
Adam Buchbinder authored
A comment misspells "invocation"; this fixes it. No code changes. Signed-off-by:
Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by:
-
Adam Buchbinder authored
Some comments misspell "should" or "shouldn't"; this fixes them. No code changes. Signed-off-by:
-
Adam Buchbinder authored
Some comments and one message misspell "successful" or variants of the word; this fixes them. No change in functionality. Signed-off-by:
-
Bernie Thompson authored
Add dynamic modeset support udlfb uses EDID to find the monitor’s preferred mode udlfb no longer has fixed mode tables – it’s able to set any mode dynamically, from the standard VESA timing characteristics of the monitor. Draws from probe and setmode code of both displaylink-mod 0.3 branch of Roberto De Ioris, and Jaya Kumar's displaylinkfb. Lays foundation for defio support and making backbuffer optional. With additional changes to minimize diffs and clean for checkpatch.pl style. Does not yet include new ioctls or refcount/mutex code from displaylink-mod. Tested to work with existing xf-video-displaylink X server unmodified. Signed-off-by:
Bernie Thompson <bernie@plugable.com> Signed-off-by:
-
Greg Kroah-Hartman authored
Now it will build with the rest of the kernel Cc: Scott Smedley <ss@aao.gov.au> Signed-off-by: -
Greg Kroah-Hartman authored
Cc: Scott Smedley <ss@aao.gov.au> Signed-off-by: -
Greg Kroah-Hartman authored
This is needed so the code properly builds Cc: Scott Smedley <ss@aao.gov.au> Signed-off-by: -
Scott Smedley authored
This is a driver for the DT3155 Digitizer Signed-off-by:
Scott Smedley <ss@aao.gov.au> Signed-off-by:
-
Radu Voicilas authored
Signed-off-by:
Radu Voicilas <rvoicilas@gmail.com> Signed-off-by:
-
Radu Voicilas authored
Signed-off-by:
-
Radu Voicilas authored
Changed all the comments to conform to the standard, aligned register values. Signed-off-by:
-
Radu Voicilas authored
Fixes to the way code looks. Signed-off-by:
-
david woo authored
This patch should allow the driver to consume a lot less power. Signed-off-by:
david woo <xinhua_wu@realsil.com.cn> Signed-off-by:
-
Radu Voicilas authored
dot11d.h needed a good refactoring - I've dropped some of the // comments or transformed them to match the kernel documentation. r8180_93cx6.h - fixed a little bit the copyright section. Signed-off-by:
-
