- 19 Oct, 2021 23 commits
-
-
Hans de Goede authored
Use the new soc_intel_is_cht() helper to find out if we are running on a CHT device rather then checking the ACPI _HRV field. This is more reliable (some CHT devices have been found where the _HRV for the PMIC is 2 rather then 3) and leads to a nice cleanup. Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211018143324.296961-4-hdegoede@redhat.com
-
Hans de Goede authored
Use the new soc_intel_is_byt()/_cht() helpers to clean things up a bit. Reviewed-by:
-
Hans de Goede authored
The soc_intel_is_foo() helpers from sound/soc/intel/common/soc-intel-quirks.h are useful outside of the sound subsystem too. Move these to include/linux/platform_data/x86/soc.h, so that other code can use them too. Suggested-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Nathan Chancellor authored
A new warning in clang points out a use of bitwise OR with boolean expressions in this driver: drivers/platform/x86/thinkpad_acpi.c:9061:11: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical] else if ((strlencmp(cmd, "level disengaged") == 0) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ || drivers/platform/x86/thinkpad_acpi.c:9061:11: note: cast one or both operands to int to silence this warning 1 error generated. This should clearly be a logical OR so change it to fix the warning. Fixes: fe98a52c ("ACPI: thinkpad-acpi: add sysfs support to fan subdriver") Link: https://github.com/ClangBuiltLinux/linux/issues/1476Reported-by:Tor Vic <torvic9@mailbox.org> Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20211018182537.2316800-1-nathan@kernel.orgReviewed-by:
-
Ye Guojin authored
coccicheck complains about the use of snprintf() in sysfs show functions: WARNING use scnprintf or sprintf Use sysfs_emit instead of scnprintf or sprintf makes more sense. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Ye Guojin <ye.guojin@zte.com.cn> Link: https://lore.kernel.org/r/20211018091750.858826-1-ye.guojin@zte.com.cnReviewed-by:
-
Qing Wang authored
show() must not use snprintf() when formatting the value to be returned to user space. Fix the coccicheck warnings: WARNING: use scnprintf or sprintf. Use sysfs_emit instead of scnprintf or sprintf makes more sense. Signed-off-by:
Qing Wang <wangqing@vivo.com> Link: https://lore.kernel.org/r/1634280641-4862-1-git-send-email-wangqing@vivo.comReviewed-by:
-
Rafael J. Wysocki authored
The ACPI_HANDLE() macro is a wrapper arond the ACPI_COMPANION() macro and the ACPI handle produced by the former comes from the ACPI device object produced by the latter, so it is way more straightforward to evaluate the latter directly instead of passing the handle produced by the former to acpi_bus_get_device(). Modify ideapad_acpi_add() accordingly (no intentional functional impact). Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/8000884.T7Z3S40VBb@kreacherReviewed-by:
-
Rafael J. Wysocki authored
If the ACPI companion of a given device is not present, the result of the ACPI_HANDLE() evaluation for it will be NULL, so calling acpi_bus_get_device() on ACPI_HANDLE() result in order to validate it is redundant. Drop the redundant acpi_bus_get_device() call from mshw0011_notify() along with a local variable related to it. No intentional functional impact. Signed-off-by:
Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/3160001.aeNJFYEL58@kreacherReviewed-by:
-
Rafael J. Wysocki authored
The ACPI_HANDLE() macro is a wrapper arond the ACPI_COMPANION() macro and the ACPI handle produced by the former comes from the ACPI device object produced by the latter, so it is way more straightforward to evaluate the latter directly instead of passing the handle produced by the former to acpi_bus_get_device(). Modify s3_wmi_check_platform_device() accordingly (no intentional functional impact). Signed-off-by:
-
Tim Crawford authored
Create the attribute groups for kb_led_color and set the `groups` field in kb_led. While touching it, also change its show method to use sysfs_emit() instead of sprintf(). Signed-off-by:
Tim Crawford <tcrawford@system76.com> Link: https://lore.kernel.org/r/20211006202202.7479-5-tcrawford@system76.comReviewed-by:
-
Tim Crawford authored
System76 laptops running open source EC firmware support configuring charging thresholds through ACPI methods. Expose this functionality through the standard sysfs entries charge_control_{start,end}_threshold. Signed-off-by: -
Jeremy Soller authored
System76 laptops models with OLED displays do not support the default Fn+F2 behavior of turning the embedded display on and off. Some models instead introduce a new notify event that is used to lock the screen so the OS will put the display in a low power state. Signed-off-by:
Jeremy Soller <jeremy@system76.com> Signed-off-by:
-
Jeremy Soller authored
Add a hwmon interface to report CPU/GPU temperature and fan speed. sensors now reports an ACPI interface with the entries: system76_acpi-acpi-0 Adapter: ACPI interface CPU fan: 0 RPM GPU fan: 0 RPM CPU temp: +47.0°C GPU temp: +0.0°C Signed-off-by:
-
Vadim Pasternak authored
Add new registers to support systems with multiply cooling devices. Modular systems support up-to four cooling devices. This capability is detected according to the registers initial setting. Signed-off-by:
Vadim Pasternak <vadimp@nvidia.com> Reviewed-by:
Michael <michaelsh@nvidia.com> Link: https://lore.kernel.org/r/20211002093609.3771576-1-vadimp@nvidia.comSigned-off-by:
-
Vadim Pasternak authored
Add documentation for the new attributes for line cards: - CPLDs versioning. - Write protection control for 'nvram' devices. - Line card reset reasons. - Enabling burning of FPGA and CPLDs. - Enabling burning of FPGA and gearbox SPI flashes, - Enabling power of whole line card. - Enabling power of QSFP ports equipped on line card. - The maximum powered required for line card feeding. - Line card configuration Id. Signed-off-by:
-
Vadim Pasternak authored
Add documentation for the new attributes: - "bios_active_image"; "bios_auth_fail"; "bios_upgrade_fail"; "bios_safe_mode" to represent various BIOS statuses. - "lc{n}_enable" - for put/release the line card to/from enable state. - "lc{n}_pwr" - for power on/off the line card. - "lc{n}_rst_mask" - for line card reset state enforced by ASIC, when it sets it due to some abnormal ASIC behavior. - "psu3_on"; "psu4_on" - for connection/disconnection power supply unit to/from the power source. - "pm_mgmt_en" - for setting power management control ownership. When power management control is provided by hardware, it means that hardware will automatically power off one or more line cards in case system power budget is under power required for feeding all powered on line cards. It could be a case, when some of power units lost power good state. - "shutdown_unlock" - for unlocking system after hardware or firmware thermal shutdown, which causes locking of the all interfaces to ASIC. Signed-off-by: -
Vadim Pasternak authored
Provide support for the Nvidia MSN4800-XX line cards for MSN4800 Ethernet modular switch system, providing a high performance switching solution for Enterprise Data Centers (EDC) for building Ethernet based clusters, High-Performance Computing (HPC) and embedded environments. Initial version provides support for line card type MSN4800-C16. This type of line card is equipped with: - Lattice CPLD device, used for system and ports control. - four Nvidia gearbox devices, used for port splitting. - FPGA device, used for gearboxes management. - 16x100G QSFP28 ports. - hotpswap controllers, voltage regulators, analog-to-digital convertors, nvram devices. - status LED. During initialization driver creates: - line card's I2C tree through "i2c-mux-mlxcpd" driver. - line card's LED objects through "leds-mlxreg" driver. - line card's CPLD register space input / output "hwmon" attributes for line control and monitoring through "mlxreg-io" driver. These attributes provide CPLD and FPAG versioning, control for upgradable components burning, NVRAM devices write protection, line card revision, line card power consuming, line card reset cause indication, etcetera. Lattice CPLD device and nvram devices are feeding from auxiliary power domain and accessible, when line card is powered off. These devices are connected by line card driver probing routine, invoked after line card security verification is done by hardware and event lc#n_verified is received for line card located in slot #n. Gearboxes, FPGA, hotpswap controllers, voltage regulators, analog-to-digital convertors are feeding from main power domain. These devices are connected after power good event "lc#n_powered" is received for line card located in slot #n. The driver 'mlxreg-lc' is driven by 'mlxreg-hotplug' driver following relevant "hotplug" events. Signed-off-by:
-
Vadim Pasternak authored
Extend structure 'mlxreg_core_data' with the field "secured". The purpose of this field is to restrict access to some attributes, if kernel is configured with security options, like: LOCK_DOWN_KERNEL_FORCE_CONFIDENTIALITY. Access to some attributes, which for example, allow burning of some hardware components, like FPGA, CPLD, SPI, etcetera can break the system. In case user does not want to allow such access, it can disable it by setting security options. Signed-off-by:
-
Vadim Pasternak authored
Extend maximum number of the attributes, exposed to 'sysfs'. It is requires in order to support modular systems, which provide more attributes for system control, statuses and info. Signed-off-by:
-
Vadim Pasternak authored
Add event notifier callbacks for modular system line cards. These callbacks are to be passed to "mlxreg-hotplug" driver by line card driver during probing. Then, when any line card related hotplug event is received (insertion ,power, synch, ready), hotplug driver will invoke callback for the relevant line card. Signed-off-by:
-
Vadim Pasternak authored
Extend the structure 'mlxreg_hotplug_device" with platform device field to allow transition of the register map and system interrupt line number to underlying hotplug devices, sharing the same register map and same interrupt line with 'mlxreg-hotplug' driver. Extend logic for hotplug devices creation and removing according to the action associated with the hotplug device description. Previously hotplug driver was capable to attach / de-attach upon hotplug events only I2C devices handled by simple I2C drivers. Now it should be able to attach also devices handled by the platform drivers. The motivation is to allow transition of platform data like: - system interrupt line number, sharing with 'mlxreg-hotplug' to underlying hotplug devices. - shared register map of programmable devices on main board to underlying hotplug devices. Additioanlly the number of 'sysfs' attributes is increased, since modular system defines more 'sysfs' attributes. Signed-off-by:
-
Vadim Pasternak authored
Add initial chassis management support for Nvidia modular Ethernet switch systems MSN4800, providing a high performance switching solution for Enterprise Data Centers (EDC) for building Ethernet based clusters, High-Performance Computing (HPC) and embedded environments. This system could be equipped with the different types of replaceable line cards and management board. The first system flavor will support the line card type MSN4800-C16 equipped with Lattice CPLD devices aimed for system and ASIC control, one Nvidia FPGA for gearboxes (PHYs) management, and four Nvidia gearboxes for the port control and with 16x100GbE QSFP28 ports and also with various devices for electrical control. The system is equipped with eight slots for line cards, four slots for power supplies and six slots for fans. It could be configured as fully populated or with even only one line card. The line cards are hot-pluggable. In the future when more line card flavors are to be available (for example line cards with 8x200Gb Eth port, with 4x400 Eth ports, or with some kind of smart cards for offloading purpose), any type of line card could be inserted at any slot. The system is based on Nvidia Spectrum-3 ASIC. The switch height is 4U and it fits standard rack size. System could be configured as fully populated or with even only one line card. The line cards are hot-pluggable. Line cards are connected to the chassis through I2C interface for the chassis management operations and through PCIe for the networking operations. Future line cards could be connected to the chassis through InfiniBand fabric, instead of PCIe. The first type of line card supports 16x100GbE QSFP28 Ethernet ports. Those line cards equipped with the programmable devices aimed for system control of Nvidia Ethernet switch ASIC control, Nvidia FPGA, Nvidia gearboxes (PHYs). The next coming card generations are supposed to support: - Line cards with 8x200Gbe QSFP28 Ethernet ports. - Line cards with 4x400Gbe QSFP-DD Ethernet ports. - Smart cards equipped with Nvidia ARM CPU for offloading and for fast access to the storage (EBoF). - Fabric cards for inter-connection. The basic system initialization flow with input signals from the programmable device to kernel hotplug driver and with OS response to some of these signals is depicted below. lc#n_prsnt *-> Input: line card presence in/out events. Informational event. Required action - 'udev' event generation for logging. lc#n_verified *-> Input: line card verification status events coming after line card security signature validation by hardware. Required action - connect line card driver and initialized line card devices feeding from system auxiliary power domain. lc#n_pwr <-* Output: line card power on / off from OS. Action should be performed by platform power management driver. lc#n_powered *-> Input: line card power on/off events coming after line card "power good" on/off events, mean that line card power up sequence has been successfully completed or line card "power good" status has been dropped. Required action - connect line card devices feeding from system main power domain. lc#n_synced *-> Input: line card synchronization events, coming after hardware-firmware synchronization handshake. Required action - to enable line card, in case lc#n_ready has been received before. lc#n_ready *-> Input: line card ready events, indicating line card PHYs ready / unready states. Required action - enable line card, in case lc#n_synced has been received before. lc#n_enable <-* Output: line card enable from OS - release FPGA and PHYs line card devices from reset state. Action should be performed by platform power management driver. lc#n_active *-> Input: when line card "active event" is received for particular line card, its network, hardware monitoring and thermal interfaces should be configured according to the configuration obtained from the firmware. When opposite "inactive event" is received all the above interfaces should be teared down. Required action - connect / disconnect the above line card interfaces through ASIC I2C chassis management driver. For initial support: - Define new system type 'VMOD0011' to support new modular system. - Provide initial platform configuration for new system type. - Extend the registers definitions. - Add support for modular system registers related to line card specific events - insertion/removal, power on/off, verification and activation. - Add hotplug configuration for the above events. - Add configurations for hotplug actions for the modular system. Signed-off-by:
-
Vadim Pasternak authored
Add new types for the Nvidia modular systems MSN4800 which could be equipped with the different types of replaceable line cards. Add new type to specify the kind of hotplug events for the line cards. The line card events are generated by the programmable device located on the main board. This device implements interrupt controller logic. Line card interrupts are associated with different line cards states during its initialization: insertion, security signature validation, power good state, security validation, hardware-firmware synchronization state, line card PHYs readiness state, firmware availability for line card ports. Also under some circumstances hardware can generate thermal shutdown for particular line card. Add new type specifying the action, which should be performed when particular hotplug event is received. This action defines in which way hotplug event should be handled by hotplug driver. There are the next actions types: - Connect I2C device with empty 'platform_data' field according to the platform topology, if device is configured (for example, power unit micro-controller driver, when power unit is connected to power source (this is what is currently supported). - Connect device with 'platform_data' field set according to the platform topology. The purpose is to pass 'platform_data' through hotplug driver to underlying device (for example line card driver). - No device is associated with hotplug event - just send "udev" event (this is what is currently supported). Extend structure 'mlxreg_hotplug_device' with hotplug action field. Extend structure 'mlxreg_core_data' with: - Registers for line card power and enabling control. - Slot number field, to indicate at which physical slot replaceable line card device is located. Signed-off-by:
-
- 11 Oct, 2021 14 commits
-
-
Shravan S authored
SAR information from BIOS may come in non sequential pattern. To overcome the issue, a check is made to extract the right SAR information using the device mode which is currently being used. Remove .owner field if calls are used which set it automatically. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by:
Shravan S <s.shravan@intel.com> Link: https://lore.kernel.org/r/20211006073525.1332925-1-s.shravan@intel.comSigned-off-by:
-
Daniel Scally authored
The int3472-discrete driver can enter an error path after initialising int3472->clock.ena_gpio, but before it has registered the clock. This will cause a NULL pointer dereference, because clkdev_drop() is not null aware. Instead of guarding the call to skl_int3472_unregister_clock() by checking for .ena_gpio, check specifically for the presence of the clk_lookup, which will guarantee clkdev_create() has already been called. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214453 Fixes: 7540599a ("platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_clock()") Signed-off-by:
Daniel Scally <djrscally@gmail.com> Link: https://lore.kernel.org/r/20211008224608.415949-1-djrscally@gmail.comSigned-off-by:
-
Zephaniah E. Loss-Cutler-Hull authored
This works just fine on my system. Signed-off-by:
Zephaniah E. Loss-Cutler-Hull <zephaniah@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211005044855.1429724-1-zephaniah@gmail.comSigned-off-by:
-
Sachi King authored
The Surface Laptop 4 AMD has used the AMD0005 to identify this controller instead of using the appropriate ACPI ID AMDI0005. Include AMD0005 in the acpi id list. Link: https://github.com/linux-surface/acpidumps/tree/master/surface_laptop_4_amd Link: https://gist.github.com/nakato/2a1a7df1a45fe680d7a08c583e1bf863 Cc: <stable@vger.kernel.org> # 5.14+ Signed-off-by:
Sachi King <nakato@nakato.io> Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20211002041840.2058647-1-nakato@nakato.ioSigned-off-by:
-
Prashant Malani authored
The comment decribing the IPC timeout hadn't been updated when the actual timeout was changed from 3 to 5 seconds in commit a7d53dbb ("platform/x86: intel_scu_ipc: Increase virtual timeout from 3 to 5 seconds") . Since the value is anyway updated to 10s now, take this opportunity to update the value in the comment too. Signed-off-by:
Prashant Malani <pmalani@chromium.org> Cc: Benson Leung <bleung@chromium.org> Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20210928101932.2543937-4-pmalani@chromium.orgSigned-off-by:
-
Prashant Malani authored
Commit a7d53dbb ("platform/x86: intel_scu_ipc: Increase virtual timeout from 3 to 5 seconds") states that the recommended timeout range is 5-10 seconds. Adjust the timeout value to the higher of those i.e 10 seconds, to account for situations where the 5 seconds is insufficient for disconnect command success. Signed-off-by:
-
Prashant Malani authored
The macro IPC_TIMEOUT is already in jiffies (it is also used like that elsewhere in the file when calling wait_for_completion_timeout()). Don’t convert it using helper functions for the purposes of calculating the busy loop expiry time. Fixes: e7b7ab38 (“platform/x86: intel_scu_ipc: Sleeping is fine when polling”) Signed-off-by:
-
Hans de Goede authored
DELL_WMI_PRIVACY is a feature toggle for the main dell-wmi driver, so it must depend on the Kconfig option which enables the main dell-wmi driver. Fixes: 8af9fa37 ("platform/x86: dell-privacy: Add support for Dell hardware privacy") Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Daniel Dadap authored
Rename the wmaa-backlight-wmi driver and associated KConfig option to remove the remaining references to the "WMAA" ACPI handle which was used in the previous name. The driver has already been updated to remove internal references to "WMAA". As part of the renaming, the components in the name have been rearranged to reflect the standard vendor_wmi_feature pattern. Signed-off-by:
Daniel Dadap <ddadap@nvidia.com> Link: https://lore.kernel.org/r/20210927202359.13684-2-ddadap@nvidia.comSigned-off-by:
-
Daniel Dadap authored
The "wmaa" in the name of the wmaa-backlight-wmi driver was named after the ACPI method handle for EC-based backlight control on the systems this driver was tested on during development. However, this "WMAA" handle is generated by the WMI compilation process, and isn't actually a part of the backlight control mechanism which this driver supports. Since the "WMAA" handle isn't actually a part of the firmware backlight interface, the various identifiers in this driver using "WMAA" or "wmaa" aren't actually appropriate. As a common denominator across the systems supported by this driver is that they are hybrid graphics systems with NVIDIA GPUs, using "nvidia" in the driver name seems more appropriate than "wmaa". Update the driver to remove "wmaa" and "WMAA" in identifier names where they appear. The kerneldoc comments for the enum wmi_brightness_method values are replaced with the verbatim text from the decompiled BMF code for this WMI class. Signed-off-by:
-
Vadim Pasternak authored
Fix shift argument for function rol32(). It should be provided in bits, while was provided in bytes. Fixes: 86148190 ("platform/mellanox: mlxreg-io: Add support for complex attributes") Signed-off-by:
-
Vadim Pasternak authored
Change kstrtou32() argument 'base' to be zero instead of 'len'. It works by chance for setting one bit value, but it is not supposed to work in case value passed to mlxreg_io_attr_store() is greater than 1. It works for example, for: echo 1 > /sys/devices/platform/mlxplat/mlxreg-io/hwmon/.../jtag_enable But it will fail for: echo n > /sys/devices/platform/mlxplat/mlxreg-io/hwmon/.../jtag_enable, where n > 1. The flow for input buffer conversion is as below: _kstrtoull(const char *s, unsigned int base, unsigned long long *res) calls: rv = _parse_integer(s, base, &_res); For the second case, where n > 1: - _parse_integer() converts 's' to 'val'. For n=2, 'len' is set to 2 (string buffer is 0x32 0x0a), for n=3 'len' is set to 3 (string buffer 0x33 0x0a), etcetera. - 'base' is equal or greater then '2' (length of input buffer). As a result, _parse_integer() exits with result zero (rv): rv = 0; while (1) { ... if (val >= base)-> (2 >= 2) break; ... rv++; ... } And _kstrtoull() in their turn will fail: if (rv == 0) return -EINVAL; Fixes: 5ec4a8ac ("platform/mellanox: Introduce support for Mellanox register access driver") Signed-off-by: -
Mauro Carvalho Chehab authored
The ReST format requires blank lines before/after identation changes, for it to properly detect lists. Fixes: ee7abc10 ("platform/x86: intel_pmc_core: export platform global reset bits via etr3 sysfs file") Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/3673e1a255ad4100c933af215b60d68ba126f820.1632740376.git.mchehab+huawei@kernel.orgSigned-off-by:
-
Mauro Carvalho Chehab authored
As described at Documentation/ABI/README doesn't contain an Attribute: field. The way sysfs ABI is supposed to work is that each different attribute would have a separate file. So, the right way to map this would be like: /sys/.../dell_privacy_supported_type/mic_mute /sys/.../dell_privacy_supported_type/camera_shutter /sys/.../dell_privacy_current_state/mic_mute /sys/.../dell_privacy_current_state/camera_shutter However, it seems to late to fix that, as this was merged already on Kernel 5.13, and a change right now would be a regression. So, instead, let's at least fix the entry to match the expected format. While here, fix the format of the contact, which is not a valid e-mail URL. This should also fix the current warnings produced when building the docs: Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi:35: WARNING: Unexpected indentation. Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi:2: WARNING: Unexpected indentation. Fixes: 8af9fa37 ("platform/x86: dell-privacy: Add support for Dell hardware privacy") Signed-off-by:
-
- 28 Sep, 2021 3 commits
-
-
Len Baker authored
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, to avoid open-coded arithmetic in the kzalloc() call inside the create_attr_set() function the code must be refactored. Using the struct_size() helper is the fast solution but it is better to switch this code to common use of attributes. Then, remove all the custom code to manage hotkey attributes and use the attribute_group structure instead, refactoring the code accordingly. Also, to manage the optional hotkey attributes (hotkey_tablet_mode and hotkey_radio_sw) use the is_visible callback from the same structure. Moreover, now the hotkey_init_tablet_mode() function never returns a negative number. So, the check after the call can be safely removed. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-argumentsSuggested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Len Baker <len.baker@gmx.com> Link: https://lore.kernel.org/r/20210926111908.6950-1-len.baker@gmx.comReviewed-by:
-
Kelly Anderson authored
Adding support specifically for Ideapad 5 Pro 16ACH6-82L5 by adding a allow list that can validate notebooks for which dytc_version is less than 5, and seem to work fine at dytc_version 4. This code has been tested to work properly on the specified system. Signed-off-by:
Kelly Anderson <kelly@xilka.com> Link: https://lore.kernel.org/r/11840239.O9o76ZdvQC@comer.internalReviewed-by:
-
Mark Gross authored
Signed-off-by: Mark Gross<markgross@kernel.org> Link: https://lore.kernel.org/r/20210921135358.85143-1-markgross@kernel.orgSigned-off-by:
-
