- 06 Jan, 2009 40 commits
-
-
Haavard Skinnemoen authored
This solves several issues: * It fixes the wrong idle clock polarity issue in a cleaner and less expensive way. * It handles the AT32AP7000 errata "SPI Chip Select 0 BITS field overrides other Chip Selects". Other chips, e.g. AT91SAM9261, have similar issues. Currently, the AT91RM9200 code path is left alone. But it might be interesting to try the same technique on RM9200 using a different CSR register. [dbrownell@users.sourceforge.net: restore debug message for activation] Signed-off-by:Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Haavard Skinnemoen authored
Currently, we have a flag called "new_1" which is basically equivalent to cpu_is_at91rm9200(). The latter is also called directly a few places. Clean up this mess by introducing a atmel_spi_v2() function for determining the controller version, and move all version dependent code over to use it. This allows us to remove the new_1 flag. Signed-off-by:
-
David Brownell authored
Generalize the old at91rm9200 "bootstrap" bitbanging SPI master driver as "spi_gpio", so it works with arbitrary GPIOs and can be configured through platform_data. Such SPI masters support: - any number of bus instances (bus_num is the platform_device.id) - any number of chipselects (one GPIO per spi_device) - all four SPI_MODE values, and SPI_CS_HIGH - i/o word sizes from 1 to 32 bits; - devices configured as with any other spi_master controller When configured using platform_data, this provides relatively low clock rates. On platforms that support inlined GPIO calls, significantly improved transfer speeds are also possible with a semi-custom driver. (It's still painful when accessing flash memory, but less so.) Sanity checked by using this version to replace both native controllers on a board with six different SPI slaves, relying on three different SPI_MODE_* values and both SPI_CS_HIGH settings for correct operation. [akpm@linux-foundation.org: cleanups] Signed-off-by:
Magnus Damm <damm@igel.co.jp> Tested-by:
-
Randy Dunlap authored
Add missing kernel-doc notation: drivers/firmware/dmi_scan.c:475: No description found for parameter 'str' drivers/firmware/dmi_scan.c:592: No description found for parameter 'f' drivers/firmware/dmi_scan.c:592: No description found for parameter 'str' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Qinghuang Feng authored
There are no argument named @flag in ncp_getopt(), remove it. Signed-off-by:
Qinghuang Feng <qhfeng.kernel@gmail.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Petr Vandrovec <VANDROVE@vc.cvut.cz> Signed-off-by:
-
Qinghuang Feng authored
The following is what it looks like before patching. It is not much readable. user@ubuntu:/proc/sys/fs/binfmt_misc$ cat status enableduser@ubuntu:/proc/sys/fs/binfmt_misc$ Signed-off-by:
-
Hiroshi Shimamoto authored
linux_binfmt uses list_head, so list.h is needed. [akpm@linux-foundation.org: fix `make headerscheck'] Signed-off-by:
Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Cc: "Darrick J. Wong" <djwong@us.ibm.com> Signed-off-by:
-
Henrik Rydberg authored
Add temperature sensor support for MacBook Air 2. Signed-off-by:
Henrik Rydberg <rydberg@euromail.se> Cc: Nicolas Boichat <nicolas@boichat.ch> Signed-off-by:
-
Nicolas Palix authored
of_node_put is needed before discarding a value received from of_find_node_by_name, eg in error handling code or when the device node is no longer used. The semantic match that catches the bug is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression struct device_node *n; position p1, p2; struct device_node *n1; statement S; identifier f; expression E; expression *ptr != NULL; @@ n@p1 = of_find_node_by_name(...) ... if (!n) S ... when != of_node_put(n) when != n1 = f(n,...) when != E = n when any when strict ( return \(0\|<+...n...+>\|ptr\); | return@p2 ...; | of_node_put(n); | n1 = f(n,...) | E = n ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s of_find_node_by_name %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by:
Nicolas Palix <npalix@diku.dk> Signed-off-by:
Julia Lawall <julia@diku.dk> Acked-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Darrick J. Wong authored
It turns out that the adt7470's automatic fan control algorithm only works when the temperature sensors get updated. This in turn happens only when someone tells the chip to read its temperature sensors. Regrettably, this means that we have to drive the chip periodically. Signed-off-by:
Darrick J. Wong <djwong@us.ibm.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Darrick J. Wong authored
The adt7470 driver currently assumes that 1s is the proper time to wait to read all temperature sensors. However, the correct time is 200ms * number_of_sensors. This patch sets the default time to provide for 10 sensors and then lowers it based on the number of sensor inputs that have nozero values. Signed-off-by:
-
Darrick J. Wong authored
In the small window that it takes to read the temperature sensors, the pwm outputs momentarily drop to 0. This causes a noticeable hiccup in fan speed, which is slightly annoying. The solution is to manually program the pwm output with whatever the automatic value is and then shift the fans to manual control while reading temperatures. Once that is done, put the fans back to whatever mode of control was there before. Signed-off-by:
-
Darrick J. Wong authored
Modify some hwmon drivers to use DIV_ROUND_CLOSEST instead of bloating source with (naughty) macros. Signed-off-by:
-
Andy Whitcroft authored
Signed-off-by:
Andy Whitcroft <apw@canonical.com> Signed-off-by:
-
Andy Whitcroft authored
Clean up checkpatch using perlcritic. Signed-off-by:
-
Andy Whitcroft authored
In the general use case struct file_operations should be a const object. Check for and warn where it is not. As suggested by Steven and Ingo. Acked-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Andy Whitcroft authored
When checking for assignments within if conditionals we check the whole of the condition, but the match is performed using a line constrained regular expression. This means we can miss split conditionals or those on the second line. Allow the check to span lines. Signed-off-by:
-
Andy Whitcroft authored
Ensure we do not report identifiers containing the word static as static declarations. For example this should not be reported as an unecessary assignement of 0: long nr_static = 0; Signed-off-by:
-
Andy Whitcroft authored
When picking up a complete statement or block for analysis we cannot simply track open/close/etc parenthesis we must take into account preprocessor section boundaries. Signed-off-by:
-
Andy Whitcroft authored
We are miscategorising a continuation fragment following an operator which may lead to us thinking that there is a space after it when there is not. Fix this up. Signed-off-by:
-
Andy Whitcroft authored
Loosen spacing checks to correctly detect this valid use of a typedef: typedef struct rcu_data *(*get_data_func)(int); Signed-off-by:
-
Mike Frysinger authored
Seems like every other release we have someone who updates vmlinux.lds.h and adds C-visible symbols without VMLINUX_SYMBOL() around them. So start checking the file and reject assignments which have plain symbols on either side. [apw@canonical.com: soften the check, add tests] Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
-
Andy Whitcroft authored
It seems to be a common idiom to include braces on conditionals in all contexts including return. Allow this exception to the return is not a function checks. Reported by Kay Sievers. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by:
-
Wolfram Sang authored
Some people work internally with -p0-patches which has the danger that one forgets to convert them to -p1 before mainlining. Bitten myself and seen p0-patches in mailing lists occasionally, this patch adds a warning to checkpatch.pl in case a patch is -p0. If you really want, you can fool this check to generate false positives, this is why it just spits a warning. Making the check 100% proof is trickier than it looks, so let's start with a version which catches the cases of real use. [apw@canonical.com: update message language, handle null prefix, add tests] Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Signed-off-by:
-
Andy Whitcroft authored
Signed-off-by:
-
Andy Whitcroft authored
Update my email address to my new work address. Also, as per our recent email conversation remove Randy and Joel from the maintainers list. Finally add LKML so that emails are recorded somewhere. Signed-off-by:
Andy Whitcroft <apw@shadowen.org> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Joel Schopp <jschopp@austin.ibm.com> Signed-off-by:
-
Andy Whitcroft authored
Signed-off-by:
-
Andy Whitcroft authored
Disallow spaces within multiple pointer stars (*) in both casts and definitions. Both of these would now be reported: (char * *) char * *foo; Also now consistently detects and reports the attributes within these structures making the error report itself clearer. Signed-off-by:
-
Andy Whitcroft authored
When we are detecting whether a comment is open when we start a hunk we check for the first comment edge in the hunk and assume its inverse. However if the hunk contains something like below, then we will assume that a comment was open. Update this heuristic to see if the comment edge is obviously within double quotes and ignore it if so: foo(" */); Signed-off-by: -
Andy Whitcroft authored
Detect the colons (:) which make up secondary bitfield declarations and apply binary colon checks. For example the following is common idiom: int foo:1, bar:1; Signed-off-by:
-
Andy Whitcroft authored
Add __weak as an official attribute. This tends to be used in a location where the automated attribute detector misses it. Signed-off-by:
-
Andy Whitcroft authored
Ensure we do not trigger the complex macros checks on structure member assignment, for example: #define foo .bar = 10 Signed-off-by:
-
Andy Whitcroft authored
Some people use double star '**' as a comment continuation, and start comments with complete lines of stars. Widen the implied comment detection to pick these up. Signed-off-by:
-
Andy Whitcroft authored
When detecting implied comments from leading stars we may incorrectly think we have detected an edge one way or the other when we have not if we drop off the end of the last hunk. Fix this up. Signed-off-by:
-
Andy Whitcroft authored
in_atomic() is not for driver use so report any such use as an ERROR. Also in_atomic() is often used to determine if we may sleep, but it is not reliable in this use model therefore strongly discourage its use. Signed-off-by:
-
Randy Dunlap authored
Fix function parameter name in kernel-doc: Warning(linux-2.6.28-git5//fs/block_dev.c:1272): No description found for parameter 'pathname' Warning(linux-2.6.28-git5//fs/block_dev.c:1272): Excess function parameter 'path' description in 'lookup_bdev' Signed-off-by:
-
Jesper Juhl authored
Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
-
Randy Dunlap authored
Eliminate sysrq terse help mode; make sysrq help messages more meaningful (more explicit/verbose). Make the sysrq action letter clearer by listing it explicitly in more sysrq help messages (when it is not simple/clear). The SysRq help message now looks like this: SysRq : HELP : loglevel(0-9) reBoot terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) Addresses http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=330403. Signed-off-by:
-
Randy Dunlap authored
Fix kernel-doc notation: Warning(linux-2.6.28-git3//fs/inode.c:120): No description found for parameter 'sb' Warning(linux-2.6.28-git3//fs/inode.c:120): No description found for parameter 'inode' Warning(linux-2.6.28-git3//fs/inode.c:588): No description found for parameter 'sb' Warning(linux-2.6.28-git3//fs/inode.c:588): No description found for parameter 'inode' Signed-off-by:
-
