Using new helpers ip6t_unregister_table_pre_exit() and
ip6t_unregister_table_exit().

Fixes: b9e69e12 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The pre_exit will un-register the underlying hook and .exit will do
the table freeing. The netns core does an unconditional synchronize_rcu
after the pre_exit hooks insuring no packets are in flight that have
picked up the pointer before completing the un-register.

Fixes: b9e69e12 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Using new helpers ipt_unregister_table_pre_exit() and
ipt_unregister_table_exit().

Fixes: b9e69e12 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The pre_exit will un-register the underlying hook and .exit will do the
table freeing. The netns core does an unconditional synchronize_rcu after
the pre_exit hooks insuring no packets are in flight that have picked up
the pointer before completing the un-register.

Fixes: b9e69e12 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The user tool modinfo is used to get information on kernel modules, including a
description where it is available.

This patch adds a brief MODULE_DESCRIPTION to netfilter kernel modules
(descriptions taken from Kconfig file or code comments)
Signed-off-by: Rob Gill <rrobgill@protonmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

When using ip_set with counters and comment, traffic causes the kernel
to panic on 32-bit ARM:

Alignment trap: not handling instruction e1b82f9f at [<bf01b0dc>]
Unhandled fault: alignment exception (0x221) at 0xea08133c
PC is at ip_set_match_extensions+0xe0/0x224 [ip_set]

The problem occurs when we try to update the 64-bit counters - the
faulting address above is not 64-bit aligned.  The problem occurs
due to the way elements are allocated, for example:

	set->dsize = ip_set_elem_len(set, tb, 0, 0);
	map = ip_set_alloc(sizeof(*map) + elements * set->dsize);

If the element has a requirement for a member to be 64-bit aligned,
and set->dsize is not a multiple of 8, but is a multiple of four,
then every odd numbered elements will be misaligned - and hitting
an atomic64_add() on that element will cause the kernel to panic.

ip_set_elem_len() must return a size that is rounded to the maximum
alignment of any extension field stored in the element.  This change
ensures that is the case.

Fixes: 95ad1f4a ("netfilter: ipset: Fix extension alignment")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The user tool modinfo is used to get information on kernel modules, including a
description where it is available.

This patch adds a brief MODULE_DESCRIPTION to the following modules:

9p
drop_monitor
esp4_offload
esp6_offload
fou
fou6
ila
sch_fq
sch_fq_codel
sch_hhf
Signed-off-by: Rob Gill <rrobgill@protonmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When preallocated service calls are being discarded, they're passed to
->discard_new_call() to have the caller clean up any attached higher-layer
preallocated pieces before being marked completed.  However, the act of
marking them completed now invokes the call's notification function - which
causes a problem because that function might assume that the previously
freed pieces of memory are still there.

Fix this by setting a dummy notification function on the socket after
calling ->discard_new_call().

This results in the following kasan message when the kafs module is
removed.

==================================================================
BUG: KASAN: use-after-free in afs_wake_up_async_call+0x6aa/0x770 fs/afs/rxrpc.c:707
Write of size 1 at addr ffff8880946c39e4 by task kworker/u4:1/21

CPU: 0 PID: 21 Comm: kworker/u4:1 Not tainted 5.8.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x18f/0x20d lib/dump_stack.c:118
 print_address_description.constprop.0.cold+0xd3/0x413 mm/kasan/report.c:383
 __kasan_report mm/kasan/report.c:513 [inline]
 kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
 afs_wake_up_async_call+0x6aa/0x770 fs/afs/rxrpc.c:707
 rxrpc_notify_socket+0x1db/0x5d0 net/rxrpc/recvmsg.c:40
 __rxrpc_set_call_completion.part.0+0x172/0x410 net/rxrpc/recvmsg.c:76
 __rxrpc_call_completed net/rxrpc/recvmsg.c:112 [inline]
 rxrpc_call_completed+0xca/0xf0 net/rxrpc/recvmsg.c:111
 rxrpc_discard_prealloc+0x781/0xab0 net/rxrpc/call_accept.c:233
 rxrpc_listen+0x147/0x360 net/rxrpc/af_rxrpc.c:245
 afs_close_socket+0x95/0x320 fs/afs/rxrpc.c:110
 afs_net_exit+0x1bc/0x310 fs/afs/main.c:155
 ops_exit_list.isra.0+0xa8/0x150 net/core/net_namespace.c:186
 cleanup_net+0x511/0xa50 net/core/net_namespace.c:603
 process_one_work+0x965/0x1690 kernel/workqueue.c:2269
 worker_thread+0x96/0xe10 kernel/workqueue.c:2415
 kthread+0x3b5/0x4a0 kernel/kthread.c:291
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293

Allocated by task 6820:
 save_stack+0x1b/0x40 mm/kasan/common.c:48
 set_track mm/kasan/common.c:56 [inline]
 __kasan_kmalloc mm/kasan/common.c:494 [inline]
 __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:467
 kmem_cache_alloc_trace+0x153/0x7d0 mm/slab.c:3551
 kmalloc include/linux/slab.h:555 [inline]
 kzalloc include/linux/slab.h:669 [inline]
 afs_alloc_call+0x55/0x630 fs/afs/rxrpc.c:141
 afs_charge_preallocation+0xe9/0x2d0 fs/afs/rxrpc.c:757
 afs_open_socket+0x292/0x360 fs/afs/rxrpc.c:92
 afs_net_init+0xa6c/0xe30 fs/afs/main.c:125
 ops_init+0xaf/0x420 net/core/net_namespace.c:151
 setup_net+0x2de/0x860 net/core/net_namespace.c:341
 copy_net_ns+0x293/0x590 net/core/net_namespace.c:482
 create_new_namespaces+0x3fb/0xb30 kernel/nsproxy.c:110
 unshare_nsproxy_namespaces+0xbd/0x1f0 kernel/nsproxy.c:231
 ksys_unshare+0x43d/0x8e0 kernel/fork.c:2983
 __do_sys_unshare kernel/fork.c:3051 [inline]
 __se_sys_unshare kernel/fork.c:3049 [inline]
 __x64_sys_unshare+0x2d/0x40 kernel/fork.c:3049
 do_syscall_64+0x60/0xe0 arch/x86/entry/common.c:359
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Freed by task 21:
 save_stack+0x1b/0x40 mm/kasan/common.c:48
 set_track mm/kasan/common.c:56 [inline]
 kasan_set_free_info mm/kasan/common.c:316 [inline]
 __kasan_slab_free+0xf7/0x140 mm/kasan/common.c:455
 __cache_free mm/slab.c:3426 [inline]
 kfree+0x109/0x2b0 mm/slab.c:3757
 afs_put_call+0x585/0xa40 fs/afs/rxrpc.c:190
 rxrpc_discard_prealloc+0x764/0xab0 net/rxrpc/call_accept.c:230
 rxrpc_listen+0x147/0x360 net/rxrpc/af_rxrpc.c:245
 afs_close_socket+0x95/0x320 fs/afs/rxrpc.c:110
 afs_net_exit+0x1bc/0x310 fs/afs/main.c:155
 ops_exit_list.isra.0+0xa8/0x150 net/core/net_namespace.c:186
 cleanup_net+0x511/0xa50 net/core/net_namespace.c:603
 process_one_work+0x965/0x1690 kernel/workqueue.c:2269
 worker_thread+0x96/0xe10 kernel/workqueue.c:2415
 kthread+0x3b5/0x4a0 kernel/kthread.c:291
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293

The buggy address belongs to the object at ffff8880946c3800
 which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 484 bytes inside of
 1024-byte region [ffff8880946c3800, ffff8880946c3c00)
The buggy address belongs to the page:
page:ffffea000251b0c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0xfffe0000000200(slab)
raw: 00fffe0000000200 ffffea0002546508 ffffea00024fa248 ffff8880aa000c40
raw: 0000000000000000 ffff8880946c3000 0000000100000002 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8880946c3880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8880946c3900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8880946c3980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                       ^
 ffff8880946c3a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8880946c3a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Reported-by: syzbot+d3eccef36ddbd02713e9@syzkaller.appspotmail.com
Fixes: 5ac0d622 ("rxrpc: Fix missing notification")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'ieee802154-for-davem-2020-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan

Stefan Schmidt says:

====================
pull-request: ieee802154 for net 2020-06-19

An update from ieee802154 for your *net* tree.

Just two small maintenance fixes to update references to the new project
homepage.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Since iproute2 commit f72c3ad00f3b ("tc: m_tunnel_key: add options
support for vxlan"), the geneve opt output use key word "geneve_opts"
instead of "geneve_opt". To make compatibility for both old and new
iproute2, let's accept both "geneve_opt" and "geneve_opts".
Suggested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Typically the firmware takes care that tp->ocp_base is reset to its
default value. That's not the case (at least) for RTL8117.
As a result subsequent PHY access reads/writes the wrong page and
the link is broken. Fix this be resetting tp->ocp_base explicitly.

Fixes: 229c1e0d ("r8169: load firmware for RTL8168fp/RTL8117")
Reported-by: Aaron Ma <mapengyu@gmail.com>
Tested-by: Aaron Ma <mapengyu@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Continue the reset path when partner adapter is not ready or H_CLOSED is
returned from reset crq. This patch allows the CRQ init to proceed to
establish a valid CRQ for traffic to flow after reset.
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Even with moving netif_tx_disable() to an earlier point when
taking down the queues for a reconfiguration, we still end
up with the occasional netdev watchdog Tx Timeout complaint.
The old method of using netif_trans_update() works fine for
queue 0, but has no effect on the remaining queues.  Using
netif_device_detach() allows us to signal to the watchdog to
ignore us for the moment.

Fixes: beead698 ("ionic: Add the basic NDO callbacks for netdev support")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ETF qdisc can queue skbs that it could not pace on the errqueue.

Address a few issues in the selftest

- recv buffer size was too small, and incorrectly calculated
- compared errno to ee_code instead of ee_errno
- missed invalid request error type

v2:
  - fix a few checkpatch --strict indentation warnings

Fixes: ea6a5476 ("selftests/net: make so_txtime more robust to timer variance")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The max MTU limit defined for ibmveth is not accounting for
virtual ethernet buffer overhead, which is twenty-two additional
bytes set aside for the ethernet header and eight additional bytes
of an opaque handle reserved for use by the hypervisor. Update the
max MTU to reflect this overhead.

Fixes: d894be57 ("ethernet: use net core MTU range checking in more drivers")
Fixes: 110447f8 ("ethernet: fix min/max MTU typos")
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wenxu says:

====================
several fixes for indirect flow_blocks offload

v2:
patch2: store the cb_priv of representor to the flow_block_cb->indr.cb_priv
in the driver. And make the correct check with the statments
this->indr.cb_priv == cb_priv

patch4: del the driver list only in the indriect cleanup callbacks

v3:
add the cover letter and changlogs.

v4:
collapsed 1/4, 2/4, 4/4 in v3 to one fix
Add the prepare patch 1 and 2

v5:
patch1: place flow_indr_block_cb_alloc() right before
flow_indr_dev_setup_offload() to avoid moving flow_block_indr_init()

This series fixes commit 1fac52da ("net: flow_offload: consolidate
indirect flow_block infrastructure") that revists the flow_block
infrastructure.

patch #1 #2: prepare for fix patch #3
add and use flow_indr_block_cb_alloc/remove function

patch #3: fix flow_indr_dev_unregister path
If the representor is removed, then identify the indirect flow_blocks
that need to be removed by the release callback and the port representor
structure. To identify the port representor structure, a new
indr.cb_priv field needs to be introduced. The flow_block also needs to
be removed from the driver list from the cleanup path

patch#4 fix block->nooffloaddevcnt warning dmesg log.
When a indr device add in offload success. The block->nooffloaddevcnt
should be 0. After the representor go away. When the dir device go away
the flow_block UNBIND operation with -EOPNOTSUPP which lead the warning
demesg log.
The block->nooffloaddevcnt should always count for indr block.
even the indr block offload successful. The representor maybe
gone away and the ingress qdisc can work in software mode.
====================
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The block->nooffloaddevcnt should always count for indr block.
even the indr block offload successful. The representor maybe
gone away and the ingress qdisc can work in software mode.

block->nooffloaddevcnt warning with following dmesg log:

[  760.667058] #####################################################
[  760.668186] ## TEST test-ecmp-add-vxlan-encap-disable-sriov.sh ##
[  760.669179] #####################################################
[  761.780655] :test: Fedora 30 (Thirty)
[  761.783794] :test: Linux reg-r-vrt-018-180 5.7.0+
[  761.822890] :test: NIC ens1f0 FW 16.26.6000 PCI 0000:81:00.0 DEVICE 0x1019 ConnectX-5 Ex
[  761.860244] mlx5_core 0000:81:00.0 ens1f0: Link up
[  761.880693] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f0: link becomes ready
[  762.059732] mlx5_core 0000:81:00.1 ens1f1: Link up
[  762.234341] :test: unbind vfs of ens1f0
[  762.257825] :test: Change ens1f0 eswitch (0000:81:00.0) mode to switchdev
[  762.291363] :test: unbind vfs of ens1f1
[  762.306914] :test: Change ens1f1 eswitch (0000:81:00.1) mode to switchdev
[  762.309237] mlx5_core 0000:81:00.1: E-Switch: Disable: mode(LEGACY), nvfs(2), active vports(3)
[  763.282598] mlx5_core 0000:81:00.1: E-Switch: Supported tc offload range - chains: 4294967294, prios: 4294967295
[  763.362825] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
[  763.444465] mlx5_core 0000:81:00.1 ens1f1: renamed from eth0
[  763.460088] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
[  763.502586] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
[  763.552429] ens1f1_0: renamed from eth0
[  763.569569] mlx5_core 0000:81:00.1: E-Switch: Enable: mode(OFFLOADS), nvfs(2), active vports(3)
[  763.629694] ens1f1_1: renamed from eth1
[  764.631552] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f1_0: link becomes ready
[  764.670841] :test: unbind vfs of ens1f0
[  764.681966] :test: unbind vfs of ens1f1
[  764.726762] mlx5_core 0000:81:00.0 ens1f0: Link up
[  764.766511] mlx5_core 0000:81:00.1 ens1f1: Link up
[  764.797325] :test: Add multipath vxlan encap rule and disable sriov
[  764.798544] :test: config multipath route
[  764.812732] mlx5_core 0000:81:00.0: lag map port 1:2 port 2:2
[  764.874556] mlx5_core 0000:81:00.0: modify lag map port 1:1 port 2:2
[  765.603681] :test: OK
[  765.659048] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f1_1: link becomes ready
[  765.675085] :test: verify rule in hw
[  765.694237] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f0: link becomes ready
[  765.711892] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f1: link becomes ready
[  766.979230] :test: OK
[  768.125419] :test: OK
[  768.127519] :test: - disable sriov ens1f1
[  768.131160] pci 0000:81:02.2: Removing from iommu group 75
[  768.132646] pci 0000:81:02.3: Removing from iommu group 76
[  769.179749] mlx5_core 0000:81:00.1: E-Switch: Disable: mode(OFFLOADS), nvfs(2), active vports(3)
[  769.455627] mlx5_core 0000:81:00.0: modify lag map port 1:1 port 2:1
[  769.703990] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
[  769.988637] mlx5_core 0000:81:00.1 ens1f1: renamed from eth0
[  769.990022] :test: - disable sriov ens1f0
[  769.994922] pci 0000:81:00.2: Removing from iommu group 73
[  769.997048] pci 0000:81:00.3: Removing from iommu group 74
[  771.035813] mlx5_core 0000:81:00.0: E-Switch: Disable: mode(OFFLOADS), nvfs(2), active vports(3)
[  771.339091] ------------[ cut here ]------------
[  771.340812] WARNING: CPU: 6 PID: 3448 at net/sched/cls_api.c:749 tcf_block_offload_unbind.isra.0+0x5c/0x60
[  771.341728] Modules linked in: act_mirred act_tunnel_key cls_flower dummy vxlan ip6_udp_tunnel udp_tunnel sch_ingress nfsv3 nfs_acl nfs lockd grace fscache tun bridge stp llc sunrpc rdma_ucm rdma_cm iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5_core intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp mlxfw act_ct nf_flow_table kvm_intel nf_nat kvm nf_conntrack irqbypass crct10dif_pclmul igb crc32_pclmul nf_defrag_ipv6 libcrc32c nf_defrag_ipv4 crc32c_intel ghash_clmulni_intel ptp ipmi_ssif intel_cstate pps_c
ore ses intel_uncore mei_me iTCO_wdt joydev ipmi_si iTCO_vendor_support i2c_i801 enclosure mei ioatdma dca lpc_ich wmi ipmi_devintf pcspkr acpi_power_meter ipmi_msghandler acpi_pad ast i2c_algo_bit drm_vram_helper drm_kms_helper drm_ttm_helper ttm drm mpt3sas raid_class scsi_transport_sas
[  771.347818] CPU: 6 PID: 3448 Comm: test-ecmp-add-v Not tainted 5.7.0+ #1146
[  771.348727] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[  771.349646] RIP: 0010:tcf_block_offload_unbind.isra.0+0x5c/0x60
[  771.350553] Code: 4a fd ff ff 83 f8 a1 74 0e 5b 4c 89 e7 5d 41 5c 41 5d e9 07 93 89 ff 8b 83 a0 00 00 00 8d 50 ff 89 93 a0 00 00 00 85 c0 75 df <0f> 0b eb db 0f 1f 44 00 00 41 57 41 56 41 55 41 89 cd 41 54 49 89
[  771.352420] RSP: 0018:ffffb33144cd3b00 EFLAGS: 00010246
[  771.353353] RAX: 0000000000000000 RBX: ffff8b37cf4b2800 RCX: 0000000000000000
[  771.354294] RDX: 00000000ffffffff RSI: ffff8b3b9aad0000 RDI: ffffffff8d5c6e20
[  771.355245] RBP: ffff8b37eb546948 R08: ffffffffc0b7a348 R09: ffff8b3b9aad0000
[  771.356189] R10: 0000000000000001 R11: ffff8b3ba7a0a1c0 R12: ffff8b37cf4b2850
[  771.357123] R13: ffff8b3b9aad0000 R14: ffff8b37cf4b2820 R15: ffff8b37cf4b2820
[  771.358039] FS:  00007f8a19b6e740(0000) GS:ffff8b3befa00000(0000) knlGS:0000000000000000
[  771.358965] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  771.359885] CR2: 00007f3afb91c1a0 CR3: 000000045133c004 CR4: 00000000001606e0
[  771.360825] Call Trace:
[  771.361764]  __tcf_block_put+0x84/0x150
[  771.362712]  ingress_destroy+0x1b/0x20 [sch_ingress]
[  771.363658]  qdisc_destroy+0x3e/0xc0
[  771.364594]  dev_shutdown+0x7a/0xa5
[  771.365522]  rollback_registered_many+0x20d/0x530
[  771.366458]  ? netdev_upper_dev_unlink+0x15d/0x1c0
[  771.367387]  unregister_netdevice_many.part.0+0xf/0x70
[  771.368310]  vxlan_netdevice_event+0xa4/0x110 [vxlan]
[  771.369454]  notifier_call_chain+0x4c/0x70
[  771.370579]  rollback_registered_many+0x2f5/0x530
[  771.371719]  rollback_registered+0x56/0x90
[  771.372843]  unregister_netdevice_queue+0x73/0xb0
[  771.373982]  unregister_netdev+0x18/0x20
[  771.375168]  mlx5e_vport_rep_unload+0x56/0xc0 [mlx5_core]
[  771.376327]  esw_offloads_disable+0x81/0x90 [mlx5_core]
[  771.377512]  mlx5_eswitch_disable_locked.cold+0xcb/0x1af [mlx5_core]
[  771.378679]  mlx5_eswitch_disable+0x44/0x60 [mlx5_core]
[  771.379822]  mlx5_device_disable_sriov+0xad/0xb0 [mlx5_core]
[  771.380968]  mlx5_core_sriov_configure+0xc1/0xe0 [mlx5_core]
[  771.382087]  sriov_numvfs_store+0xfc/0x130
[  771.383195]  kernfs_fop_write+0xce/0x1b0
[  771.384302]  vfs_write+0xb6/0x1a0
[  771.385410]  ksys_write+0x5f/0xe0
[  771.386500]  do_syscall_64+0x5b/0x1d0
[  771.387569]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 0fdcf78d ("net: use flow_indr_dev_setup_offload()")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the representor is removed, then identify the indirect flow_blocks
that need to be removed by the release callback and the port representor
structure. To identify the port representor structure, a new
indr.cb_priv field needs to be introduced. The flow_block also needs to
be removed from the driver list from the cleanup path.

Fixes: 1fac52da ("net: flow_offload: consolidate indirect flow_block infrastructure")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prepare fix the bug in the next patch. use flow_indr_block_cb_alloc/remove
function and remove the __flow_block_indr_binding.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add flow_indr_block_cb_alloc/remove function for next fix patch.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, trying to change the DF parameter of a geneve device does
nothing:

    # ip -d link show geneve1
    14: geneve1: <snip>
        link/ether <snip>
        geneve id 1 remote 10.0.0.1 ttl auto df set dstport 6081 <snip>
    # ip link set geneve1 type geneve id 1 df unset
    # ip -d link show geneve1
    14: geneve1: <snip>
        link/ether <snip>
        geneve id 1 remote 10.0.0.1 ttl auto df set dstport 6081 <snip>

We just need to update the value in geneve_changelink.

Fixes: a025fb5f ("geneve: Allow configuration of DF behaviour")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

VLAN tag insertion/extraction offload is correctly
activated at probe time but deactivation of this feature
(i.e. via ethtool) is broken.  Toggling works only for
Tx/Rx ring 0 of a PF, and is ignored for the other rings,
including the VF rings.
To fix this, the existing VLAN offload toggling code
was extended to all the rings assigned to a netdevice,
instead of the default ring 0 (likely a leftover from the
early validation days of this feature).  And the code was
moved to the common set_features() function to fix toggling
for the VF driver too.

Fixes: d4fd0404 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Undo previously done operation in case macb_phylink_connect()
fails. Since macb_reset_hw() is the 1st undo operation the
napi_exit label was renamed to reset_hw.

Fixes: 7897b071 ("net: macb: convert to phylink")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Howells says:

====================
rxrpc: Performance drop fix and other fixes

Here are three fixes for rxrpc:

 (1) Fix a trace symbol mapping.  It doesn't seem to let you map to "".

 (2) Fix the handling of the remote receive window size when it increases
     beyond the size we can support for our transmit window.

 (3) Fix a performance drop caused by retransmitted packets being
     accidentally marked as already ACK'd.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: phy: MDIO bus scanning fixes

This patch series fixes two problems with the current MDIO bus scanning
logic which was identified while moving from 4.9 to 5.4 on devices that
do rely on scanning the MDIO bus at runtime because they use pluggable
cards.

Changes in v2:

- added comment explaining the special value of -ENODEV
- added Andrew's Reviewed-by tag
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 02a6efca ("net: phy: allow scanning busses with missing
phys") added a special condition to return -ENODEV in case -ENODEV or
-EIO was returned from the first read of the MII_PHYSID1 register.

In case the MDIO bus data line pull-up is not strong enough, the MDIO
bus controller will not flag this as a read error. This can happen when
a pluggable daughter card is not connected and weak internal pull-ups
are used (since that is the only option, otherwise the pins are
floating).

The second read of MII_PHYSID2 will be correctly flagged an error
though, but now we will return -EIO which will be treated as a hard
error, thus preventing MDIO bus scanning loops to continue succesfully.

Apply the same logic to both register reads, thus allowing the scanning
logic to proceed.

Fixes: 02a6efca ("net: phy: allow scanning busses with missing phys")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 209c65b6 ("drivers/of/of_mdio.c:fix of_mdiobus_register()")
introduced a break of the loop on the premise that a successful
registration should exit the loop. The premise is correct but not to
code, because rc && rc != -ENODEV is just a special error condition,
that means we would exit the loop even with rc == -ENODEV which is
absolutely not correct since this is the error code to indicate to the
MDIO bus layer that scanning should continue.

Fix this by explicitly checking for rc = 0 as the only valid condition
to break out of the loop.

Fixes: 209c65b6 ("drivers/of/of_mdio.c:fix of_mdiobus_register()")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix typo: "Triger" --> "Trigger"
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update URL to our new home.
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

We finally came around to setup a new project website.
Update the reference here.
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

Fix typo: "trigered" --> "triggered"
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net): ipsec 2020-06-19

1) Fix double ESP trailer insertion in IPsec crypto offload if
   netif_xmit_frozen_or_stopped is true. From Huy Nguyen.

2) Merge fixup for "remove output_finish indirection from
   xfrm_state_afinfo". From Stephen Rothwell.

3) Select CRYPTO_SEQIV for ESP as this is needed for GCM and several
   other encryption algorithms. Also modernize the crypto algorithm
   selections for ESP and AH, remove those that are maked as "MUST NOT"
   and add those that are marked as "MUST" be implemented in RFC 8221.
   From Eric Biggers.

Please note the merge conflict between commit:

a7f7f624 ("treewide: replace '---help---' in Kconfig files with 'help'")

from Linus' tree and commits:

7d4e3919 ("esp, ah: consolidate the crypto algorithm selections")
be013698 ("esp, ah: modernize the crypto algorithm selections")

from the ipsec tree.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2020-06-18

This series contains fixes to ixgbe, i40e and ice driver.

Ciara fixes up the ixgbe, i40e and ice drivers to protect access when
allocating and freeing the rings.  In addition, made use of READ_ONCE
when reading the rings prior to accessing the statistics pointer.

Björn fixes a crash where the receive descriptor ring allocation was
moved to a different function, which broke the ethtool set_ringparam()
hook.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When the AF_XDP buffer allocator was introduced, the Rx SW ring
"rx_bi" allocation was moved from i40e_setup_rx_descriptors()
function, and was instead done in the i40e_configure_rx_ring()
function.

This broke the ethtool set_ringparam() hook for changing the Rx
descriptor count, which was relying on i40e_setup_rx_descriptors() to
handle the allocation.

Fix this by adding an explicit i40e_alloc_rx_bi() call to
i40e_set_ringparam().

Fixes: be1222b5 ("i40e: Separate kernel allocated rx_bi rings from AF_XDP rings")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The READ_ONCE macro is used when reading rings prior to accessing the
statistics pointer. The corresponding WRITE_ONCE usage when allocating and
freeing the rings to ensure protected access was not in place. Introduce
this.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

READ_ONCE should be used when reading rings prior to accessing the
statistics pointer. Introduce this as well as the corresponding WRITE_ONCE
usage when allocating and freeing the rings, to ensure protected access.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

READ_ONCE should be used when reading rings prior to accessing the
statistics pointer. Introduce this as well as the corresponding WRITE_ONCE
usage when allocating and freeing the rings, to ensure protected access.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Back in commit f60e5990 ("ipv6: protect skb->sk accesses
from recursive dereference inside the stack") Hannes added code
so that IPv6 stack would not trust skb->sk for typical cases
where packet goes through 'standard' xmit path (__dev_queue_xmit())

Alas af_packet had a dev_direct_xmit() path that was not
dealing yet with xmit_recursion level.

Also change sk_mc_loop() to dump a stack once only.

Without this patch, syzbot was able to trigger :

[1]
[  153.567378] WARNING: CPU: 7 PID: 11273 at net/core/sock.c:721 sk_mc_loop+0x51/0x70
[  153.567378] Modules linked in: nfnetlink ip6table_raw ip6table_filter iptable_raw iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 nf_defrag_ipv6 iptable_filter macsec macvtap tap macvlan 8021q hsr wireguard libblake2s blake2s_x86_64 libblake2s_generic udp_tunnel ip6_udp_tunnel libchacha20poly1305 poly1305_x86_64 chacha_x86_64 libchacha curve25519_x86_64 libcurve25519_generic netdevsim batman_adv dummy team bridge stp llc w1_therm wire i2c_mux_pca954x i2c_mux cdc_acm ehci_pci ehci_hcd mlx4_en mlx4_ib ib_uverbs ib_core mlx4_core
[  153.567386] CPU: 7 PID: 11273 Comm: b159172088 Not tainted 5.8.0-smp-DEV #273
[  153.567387] RIP: 0010:sk_mc_loop+0x51/0x70
[  153.567388] Code: 66 83 f8 0a 75 24 0f b6 4f 12 b8 01 00 00 00 31 d2 d3 e0 a9 bf ef ff ff 74 07 48 8b 97 f0 02 00 00 0f b6 42 3a 83 e0 01 5d c3 <0f> 0b b8 01 00 00 00 5d c3 0f b6 87 18 03 00 00 5d c0 e8 04 83 e0
[  153.567388] RSP: 0018:ffff95c69bb93990 EFLAGS: 00010212
[  153.567388] RAX: 0000000000000011 RBX: ffff95c6e0ee3e00 RCX: 0000000000000007
[  153.567389] RDX: ffff95c69ae50000 RSI: ffff95c6c30c3000 RDI: ffff95c6c30c3000
[  153.567389] RBP: ffff95c69bb93990 R08: ffff95c69a77f000 R09: 0000000000000008
[  153.567389] R10: 0000000000000040 R11: 00003e0e00026128 R12: ffff95c6c30c3000
[  153.567390] R13: ffff95c6cc4fd500 R14: ffff95c6f84500c0 R15: ffff95c69aa13c00
[  153.567390] FS:  00007fdc3a283700(0000) GS:ffff95c6ff9c0000(0000) knlGS:0000000000000000
[  153.567390] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  153.567391] CR2: 00007ffee758e890 CR3: 0000001f9ba20003 CR4: 00000000001606e0
[  153.567391] Call Trace:
[  153.567391]  ip6_finish_output2+0x34e/0x550
[  153.567391]  __ip6_finish_output+0xe7/0x110
[  153.567391]  ip6_finish_output+0x2d/0xb0
[  153.567392]  ip6_output+0x77/0x120
[  153.567392]  ? __ip6_finish_output+0x110/0x110
[  153.567392]  ip6_local_out+0x3d/0x50
[  153.567392]  ipvlan_queue_xmit+0x56c/0x5e0
[  153.567393]  ? ksize+0x19/0x30
[  153.567393]  ipvlan_start_xmit+0x18/0x50
[  153.567393]  dev_direct_xmit+0xf3/0x1c0
[  153.567393]  packet_direct_xmit+0x69/0xa0
[  153.567394]  packet_sendmsg+0xbf0/0x19b0
[  153.567394]  ? plist_del+0x62/0xb0
[  153.567394]  sock_sendmsg+0x65/0x70
[  153.567394]  sock_write_iter+0x93/0xf0
[  153.567394]  new_sync_write+0x18e/0x1a0
[  153.567395]  __vfs_write+0x29/0x40
[  153.567395]  vfs_write+0xb9/0x1b0
[  153.567395]  ksys_write+0xb1/0xe0
[  153.567395]  __x64_sys_write+0x1a/0x20
[  153.567395]  do_syscall_64+0x43/0x70
[  153.567396]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  153.567396] RIP: 0033:0x453549
[  153.567396] Code: Bad RIP value.
[  153.567396] RSP: 002b:00007fdc3a282cc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[  153.567397] RAX: ffffffffffffffda RBX: 00000000004d32d0 RCX: 0000000000453549
[  153.567397] RDX: 0000000000000020 RSI: 0000000020000300 RDI: 0000000000000003
[  153.567398] RBP: 00000000004d32d8 R08: 0000000000000000 R09: 0000000000000000
[  153.567398] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004d32dc
[  153.567398] R13: 00007ffee742260f R14: 00007fdc3a282dc0 R15: 00007fdc3a283700
[  153.567399] ---[ end trace c1d5ae2b1059ec62 ]---

f60e5990 ("ipv6: protect skb->sk accesses from recursive dereference inside the stack")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

of_find_node_by_name() will do an of_node_put() on the "from" argument.
With CONFIG_OF_DYNAMIC enabled which checks for device_node reference
counts, we would be getting a warning like this:

[    6.347230] refcount_t: increment on 0; use-after-free.
[    6.352498] WARNING: CPU: 3 PID: 77 at lib/refcount.c:156
refcount_inc_checked+0x38/0x44
[    6.360601] Modules linked in:
[    6.363661] CPU: 3 PID: 77 Comm: kworker/3:1 Tainted: G        W
5.4.46-gb78b3e9956e6 #13
[    6.372546] Hardware name: BCM97278SV (DT)
[    6.376649] Workqueue: events deferred_probe_work_func
[    6.381796] pstate: 60000005 (nZCv daif -PAN -UAO)
[    6.386595] pc : refcount_inc_checked+0x38/0x44
[    6.391133] lr : refcount_inc_checked+0x38/0x44
...
[    6.478791] Call trace:
[    6.481243]  refcount_inc_checked+0x38/0x44
[    6.485433]  kobject_get+0x3c/0x4c
[    6.488840]  of_node_get+0x24/0x34
[    6.492247]  of_irq_find_parent+0x3c/0xe0
[    6.496263]  of_irq_parse_one+0xe4/0x1d0
[    6.500191]  irq_of_parse_and_map+0x44/0x84
[    6.504381]  bcm_sf2_sw_probe+0x22c/0x844
[    6.508397]  platform_drv_probe+0x58/0xa8
[    6.512413]  really_probe+0x238/0x3fc
[    6.516081]  driver_probe_device+0x11c/0x12c
[    6.520358]  __device_attach_driver+0xa8/0x100
[    6.524808]  bus_for_each_drv+0xb4/0xd0
[    6.528650]  __device_attach+0xd0/0x164
[    6.532493]  device_initial_probe+0x24/0x30
[    6.536682]  bus_probe_device+0x38/0x98
[    6.540524]  deferred_probe_work_func+0xa8/0xd4
[    6.545061]  process_one_work+0x178/0x288
[    6.549078]  process_scheduled_works+0x44/0x48
[    6.553529]  worker_thread+0x218/0x270
[    6.557285]  kthread+0xdc/0xe4
[    6.560344]  ret_from_fork+0x10/0x18
[    6.563925] ---[ end trace 68f65caf69bb152a ]---

Fix this by adding a of_node_get() to increment the reference count
prior to the call.

Fixes: afa3b592 ("net: dsa: bcm_sf2: Ensure correct sub-node is parsed")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 3b335832 ("net: Add fraglist GRO/GSO feature flags") missed
an entry for NETIF_F_GSO_FRAGLIST in netdev_features_strings array. As
a result, fraglist GSO feature is not shown in 'ethtool -k' output and
can't be toggled on/off.
The fix is trivial.

Fixes: 3b335832 ("net: Add fraglist GRO/GSO feature flags")
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>