- 10 Jul, 2020 2 commits
-
-
Maxim Uvarov authored
Some drivers (like ftpm) can operate only after tee-supplicant runs because of tee-supplicant provides things like storage services (rpmb, shm). This patch splits probe of non tee-supplicant dependable drivers to the early stage, and after tee-supplicant run probe other drivers. Signed-off-by:
Maxim Uvarov <maxim.uvarov@linaro.org> Suggested-by:
Sumit Garg <sumit.garg@linaro.org> Suggested-by:
Arnd Bergmann <arnd@linaro.org> Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by:
Jens Wiklander <jens.wiklander@linaro.org>
-
Maxim Uvarov authored
With the evolving use-cases for TEE bus, now it's required to support multi-stage enumeration process. But using a simple index doesn't suffice this requirement and instead leads to duplicate sysfs entries. So instead switch to use more informative device UUID for sysfs entry like: /sys/bus/tee/devices/optee-ta-<uuid> Signed-off-by:
-
- 31 May, 2020 15 commits
-
-
Linus Torvalds authored
-
Joe Perches authored
Yes, staying withing 80 columns is certainly still _preferred_. But it's not the hard limit that the checkpatch warnings imply, and other concerns can most certainly dominate. Increase the default limit to 100 characters. Not because 100 characters is some hard limit either, but that's certainly a "what are you doing" kind of value and less likely to be about the occasional slightly longer lines. Miscellanea: - to avoid unnecessary whitespace changes in files, checkpatch will no longer emit a warning about line length when scanning files unless --strict is also used - Add a bit to coding-style about alignment to open parenthesis Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A pile of x86 fixes: - Prevent a memory leak in ioperm which was caused by the stupid assumption that the exit cleanup is always called for current, which is not the case when fork fails after taking a reference on the ioperm bitmap. - Fix an arithmething overflow in the DMA code on 32bit systems - Fill gaps in the xstate copy with defaults instead of leaving them uninitialized - Revert: "Make __X32_SYSCALL_BIT be unsigned long" as it turned out that existing user space fails to build" * tag 'x86-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ioperm: Prevent a memory leak when fork fails x86/dma: Fix max PFN arithmetic overflow on 32 bit systems copy_xstate_to_kernel(): don't leave parts of destination uninitialized x86/syscalls: Revert "x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long" -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Thomas Gleixner: "A single scheduler fix preventing a crash in NUMA balancing. The current->mm check is not reliable as the mm might be temporary due to use_mm() in a kthread. Check for PF_KTHREAD explictly" * tag 'sched-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Don't NUMA balance for kthreads
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: "Another week, another set of bug fixes: 1) Fix pskb_pull length in __xfrm_transport_prep(), from Xin Long. 2) Fix double xfrm_state put in esp{4,6}_gro_receive(), also from Xin Long. 3) Re-arm discovery timer properly in mac80211 mesh code, from Linus Lüssing. 4) Prevent buffer overflows in nf_conntrack_pptp debug code, from Pablo Neira Ayuso. 5) Fix race in ktls code between tls_sw_recvmsg() and tls_decrypt_done(), from Vinay Kumar Yadav. 6) Fix crashes on TCP fallback in MPTCP code, from Paolo Abeni. 7) More validation is necessary of untrusted GSO packets coming from virtualization devices, from Willem de Bruijn. 8) Fix endianness of bnxt_en firmware message length accesses, from Edwin Peer. 9) Fix infinite loop in sch_fq_pie, from Davide Caratti. 10) Fix lockdep splat in DSA by setting lockless TX in netdev features for slave ports, from Vladimir Oltean. 11) Fix suspend/resume crashes in mlx5, from Mark Bloch. 12) Fix use after free in bpf fmod_ret, from Alexei Starovoitov. 13) ARP retransmit timer guard uses wrong offset, from Hongbin Liu. 14) Fix leak in inetdev_init(), from Yang Yingliang. 15) Don't try to use inet hash and unhash in l2tp code, results in crashes. From Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits) l2tp: add sk_family checks to l2tp_validate_socket l2tp: do not use inet_hash()/inet_unhash() net: qrtr: Allocate workqueue before kernel_bind mptcp: remove msk from the token container at destruction time. mptcp: fix race between MP_JOIN and close mptcp: fix unblocking connect() net/sched: act_ct: add nat mangle action only for NAT-conntrack devinet: fix memleak in inetdev_init() virtio_vsock: Fix race condition in virtio_transport_recv_pkt drivers/net/ibmvnic: Update VNIC protocol version reporting NFC: st21nfca: add missed kfree_skb() in an error path neigh: fix ARP retransmit timer guard bpf, selftests: Add a verifier test for assigning 32bit reg states to 64bit ones bpf, selftests: Verifier bounds tests need to be updated bpf: Fix a verifier issue when assigning 32bit reg states to 64bit ones bpf: Fix use-after-free in fmod_ret check net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta() net/mlx5e: Fix MLX5_TC_CT dependencies net/mlx5e: Properly set default values when disabling adaptive moderation net/mlx5e: Fix arch depending casting issue in FEC ... -
Eric Dumazet authored
syzbot was able to trigger a crash after using an ISDN socket and fool l2tp. Fix this by making sure the UDP socket is of the proper family. BUG: KASAN: slab-out-of-bounds in setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78 Write of size 1 at addr ffff88808ed0c590 by task syz-executor.5/3018 CPU: 0 PID: 3018 Comm: syz-executor.5 Not tainted 5.7.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd3/0x413 mm/kasan/report.c:382 __kasan_report.cold+0x20/0x38 mm/kasan/report.c:511 kasan_report+0x33/0x50 mm/kasan/common.c:625 setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78 l2tp_tunnel_register+0xb15/0xdd0 net/l2tp/l2tp_core.c:1523 l2tp_nl_cmd_tunnel_create+0x4b2/0xa60 net/l2tp/l2tp_netlink.c:249 genl_family_rcv_msg_doit net/netlink/genetlink.c:673 [inline] genl_family_rcv_msg net/netlink/genetlink.c:718 [inline] genl_rcv_msg+0x627/0xdf0 net/netlink/genetlink.c:735 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2469 genl_rcv+0x24/0x40 net/netlink/genetlink.c:746 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6e6/0x810 net/socket.c:2352 ___sys_sendmsg+0x100/0x170 net/socket.c:2406 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2439 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x45ca29 Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007effe76edc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004fe1c0 RCX: 000000000045ca29 RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000005 RBP: 000000000078bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 000000000000094e R14: 00000000004d5d00 R15: 00007effe76ee6d4 Allocated by task 3018: save_stack+0x1b/0x40 mm/kasan/common.c:49 set_track mm/kasan/common.c:57 [inline] __kasan_kmalloc mm/kasan/common.c:495 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:468 __do_kmalloc mm/slab.c:3656 [inline] __kmalloc+0x161/0x7a0 mm/slab.c:3665 kmalloc include/linux/slab.h:560 [inline] sk_prot_alloc+0x223/0x2f0 net/core/sock.c:1612 sk_alloc+0x36/0x1100 net/core/sock.c:1666 data_sock_create drivers/isdn/mISDN/socket.c:600 [inline] mISDN_sock_create+0x272/0x400 drivers/isdn/mISDN/socket.c:796 __sock_create+0x3cb/0x730 net/socket.c:1428 sock_create net/socket.c:1479 [inline] __sys_socket+0xef/0x200 net/socket.c:1521 __do_sys_socket net/socket.c:1530 [inline] __se_sys_socket net/socket.c:1528 [inline] __x64_sys_socket+0x6f/0xb0 net/socket.c:1528 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 Freed by task 2484: save_stack+0x1b/0x40 mm/kasan/common.c:49 set_track mm/kasan/common.c:57 [inline] kasan_set_free_info mm/kasan/common.c:317 [inline] __kasan_slab_free+0xf7/0x140 mm/kasan/common.c:456 __cache_free mm/slab.c:3426 [inline] kfree+0x109/0x2b0 mm/slab.c:3757 kvfree+0x42/0x50 mm/util.c:603 __free_fdtable+0x2d/0x70 fs/file.c:31 put_files_struct fs/file.c:420 [inline] put_files_struct+0x248/0x2e0 fs/file.c:413 exit_files+0x7e/0xa0 fs/file.c:445 do_exit+0xb04/0x2dd0 kernel/exit.c:791 do_group_exit+0x125/0x340 kernel/exit.c:894 get_signal+0x47b/0x24e0 kernel/signal.c:2739 do_signal+0x81/0x2240 arch/x86/kernel/signal.c:784 exit_to_usermode_loop+0x26c/0x360 arch/x86/entry/common.c:161 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline] syscall_return_slowpath arch/x86/entry/common.c:279 [inline] do_syscall_64+0x6b1/0x7d0 arch/x86/entry/common.c:305 entry_SYSCALL_64_after_hwframe+0x49/0xb3 The buggy address belongs to the object at ffff88808ed0c000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 1424 bytes inside of 2048-byte region [ffff88808ed0c000, ffff88808ed0c800) The buggy address belongs to the page: page:ffffea00023b4300 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0xfffe0000000200(slab) raw: 00fffe0000000200 ffffea0002838208 ffffea00015ba288 ffff8880aa000e00 raw: 0000000000000000 ffff88808ed0c000 0000000100000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88808ed0c480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88808ed0c500: 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88808ed0c580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff88808ed0c600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88808ed0c680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: 6b9f3423 ("l2tp: fix races in tunnel creation") Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by:Eric Dumazet <edumazet@google.com> Cc: James Chapman <jchapman@katalix.com> Cc: Guillaume Nault <gnault@redhat.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Acked-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
syzbot recently found a way to crash the kernel [1] Issue here is that inet_hash() & inet_unhash() are currently only meant to be used by TCP & DCCP, since only these protocols provide the needed hashinfo pointer. L2TP uses a single list (instead of a hash table) This old bug became an issue after commit 61023658 ("bpf: Add new cgroup attach type to enable sock modifications") since after this commit, sk_common_release() can be called while the L2TP socket is still considered 'hashed'. general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 7063 Comm: syz-executor654 Not tainted 5.7.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:inet_unhash+0x11f/0x770 net/ipv4/inet_hashtables.c:600 Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e dd 04 00 00 48 8d 7d 08 44 8b 73 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 55 05 00 00 48 8d 7d 14 4c 8b 6d 08 48 b8 00 00 RSP: 0018:ffffc90001777d30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff88809a6df940 RCX: ffffffff8697c242 RDX: 0000000000000001 RSI: ffffffff8697c251 RDI: 0000000000000008 RBP: 0000000000000000 R08: ffff88809f3ae1c0 R09: fffffbfff1514cc1 R10: ffffffff8a8a6607 R11: fffffbfff1514cc0 R12: ffff88809a6df9b0 R13: 0000000000000007 R14: 0000000000000000 R15: ffffffff873a4d00 FS: 0000000001d2b880(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000006cd090 CR3: 000000009403a000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: sk_common_release+0xba/0x370 net/core/sock.c:3210 inet_create net/ipv4/af_inet.c:390 [inline] inet_create+0x966/0xe00 net/ipv4/af_inet.c:248 __sock_create+0x3cb/0x730 net/socket.c:1428 sock_create net/socket.c:1479 [inline] __sys_socket+0xef/0x200 net/socket.c:1521 __do_sys_socket net/socket.c:1530 [inline] __se_sys_socket net/socket.c:1528 [inline] __x64_sys_socket+0x6f/0xb0 net/socket.c:1528 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x441e29 Code: e8 fc b3 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffdce184148 EFLAGS: 00000246 ORIG_RAX: 0000000000000029 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000441e29 RDX: 0000000000000073 RSI: 0000000000000002 RDI: 0000000000000002 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000402c30 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: ---[ end trace 23b6578228ce553e ]--- RIP: 0010:inet_unhash+0x11f/0x770 net/ipv4/inet_hashtables.c:600 Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e dd 04 00 00 48 8d 7d 08 44 8b 73 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 55 05 00 00 48 8d 7d 14 4c 8b 6d 08 48 b8 00 00 RSP: 0018:ffffc90001777d30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff88809a6df940 RCX: ffffffff8697c242 RDX: 0000000000000001 RSI: ffffffff8697c251 RDI: 0000000000000008 RBP: 0000000000000000 R08: ffff88809f3ae1c0 R09: fffffbfff1514cc1 R10: ffffffff8a8a6607 R11: fffffbfff1514cc0 R12: ffff88809a6df9b0 R13: 0000000000000007 R14: 0000000000000000 R15: ffffffff873a4d00 FS: 0000000001d2b880(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000006cd090 CR3: 000000009403a000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 0d76751f ("l2tp: Add L2TPv3 IP encapsulation (no UDP) support") Signed-off-by:
-
Chris Lew authored
A null pointer dereference in qrtr_ns_data_ready() is seen if a client opens a qrtr socket before qrtr_ns_init() can bind to the control port. When the control port is bound, the ENETRESET error will be broadcasted and clients will close their sockets. This results in DEL_CLIENT packets being sent to the ns and qrtr_ns_data_ready() being called without the workqueue being allocated. Allocate the workqueue before setting sk_data_ready and binding to the control port. This ensures that the work and workqueue structs are allocated and initialized before qrtr_ns_data_ready can be called. Fixes: 0c2204a4 ("net: qrtr: Migrate nameservice to kernel from userspace") Signed-off-by:
Chris Lew <clew@codeaurora.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by:
-
David S. Miller authored
Paolo Abeni says: ==================== mptcp: a bunch of fixes This patch series pulls together a few bugfixes for MPTCP bug observed while doing stress-test with apache bench - forced to use MPTCP and multiple subflows. ==================== Signed-off-by: -
Paolo Abeni authored
Currently we remote the msk from the token container only via mptcp_close(). The MPTCP master socket can be destroyed also via other paths (e.g. if not yet accepted, when shutting down the listener socket). When we hit the latter scenario, dangling msk references are left into the token container, leading to memory corruption and/or UaF. This change addresses the issue by moving the token removal into the msk destructor. Fixes: 79c0949e ("mptcp: Add key generation and token tree") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Paolo Abeni authored
If a MP_JOIN subflow completes the 3whs while another CPU is closing the master msk, we can hit the following race: CPU1 CPU2 close() mptcp_close subflow_syn_recv_sock mptcp_token_get_sock mptcp_finish_join inet_sk_state_load mptcp_token_destroy inet_sk_state_store(TCP_CLOSE) __mptcp_flush_join_list() mptcp_sock_graft list_add_tail sk_common_release sock_orphan() <socket free> The MP_JOIN socket will be leaked. Additionally we can hit UaF for the msk 'struct socket' referenced via the 'conn' field. This change try to address the issue introducing some synchronization between the MP_JOIN 3whs and mptcp_close via the join_list spinlock. If we detect the msk is closing the MP_JOIN socket is closed, too. Fixes: f296234c ("mptcp: Add handling of incoming MP_JOIN requests") Signed-off-by: -
Paolo Abeni authored
Currently unblocking connect() on MPTCP sockets fails frequently. If mptcp_stream_connect() is invoked to complete a previously attempted unblocking connection, it will still try to create the first subflow via __mptcp_socket_create(). If the 3whs is completed and the 'can_ack' flag is already set, the latter will fail with -EINVAL. This change addresses the issue checking for pending connect and delegating the completion to the first subflow. Additionally do msk addresses and sk_state changes only when needed. Fixes: 2303f994 ("mptcp: Associate MPTCP context with TCP socket") Signed-off-by:
-
wenxu authored
Currently add nat mangle action with comparing invert and orig tuple. It is better to check IPS_NAT_MASK flags first to avoid non necessary memcmp for non-NAT conntrack. Signed-off-by:
wenxu <wenxu@ucloud.cn> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Yang Yingliang authored
When devinet_sysctl_register() failed, the memory allocated in neigh_parms_alloc() should be freed. Fixes: 20e61da7 ("ipv4: fail early when creating netdev named all or default") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Jia He authored
When client on the host tries to connect(SOCK_STREAM, O_NONBLOCK) to the server on the guest, there will be a panic on a ThunderX2 (armv8a server): [ 463.718844] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 463.718848] Mem abort info: [ 463.718849] ESR = 0x96000044 [ 463.718852] EC = 0x25: DABT (current EL), IL = 32 bits [ 463.718853] SET = 0, FnV = 0 [ 463.718854] EA = 0, S1PTW = 0 [ 463.718855] Data abort info: [ 463.718856] ISV = 0, ISS = 0x00000044 [ 463.718857] CM = 0, WnR = 1 [ 463.718859] user pgtable: 4k pages, 48-bit VAs, pgdp=0000008f6f6e9000 [ 463.718861] [0000000000000000] pgd=0000000000000000 [ 463.718866] Internal error: Oops: 96000044 [#1] SMP [...] [ 463.718977] CPU: 213 PID: 5040 Comm: vhost-5032 Tainted: G O 5.7.0-rc7+ #139 [ 463.718980] Hardware name: GIGABYTE R281-T91-00/MT91-FS1-00, BIOS F06 09/25/2018 [ 463.718982] pstate: 60400009 (nZCv daif +PAN -UAO) [ 463.718995] pc : virtio_transport_recv_pkt+0x4c8/0xd40 [vmw_vsock_virtio_transport_common] [ 463.718999] lr : virtio_transport_recv_pkt+0x1fc/0xd40 [vmw_vsock_virtio_transport_common] [ 463.719000] sp : ffff80002dbe3c40 [...] [ 463.719025] Call trace: [ 463.719030] virtio_transport_recv_pkt+0x4c8/0xd40 [vmw_vsock_virtio_transport_common] [ 463.719034] vhost_vsock_handle_tx_kick+0x360/0x408 [vhost_vsock] [ 463.719041] vhost_worker+0x100/0x1a0 [vhost] [ 463.719048] kthread+0x128/0x130 [ 463.719052] ret_from_fork+0x10/0x18 The race condition is as follows: Task1 Task2 ===== ===== __sock_release virtio_transport_recv_pkt __vsock_release vsock_find_bound_socket (found sk) lock_sock_nested vsock_remove_sock sock_orphan sk_set_socket(sk, NULL) sk->sk_shutdown = SHUTDOWN_MASK ... release_sock lock_sock virtio_transport_recv_connecting sk->sk_socket->state (panic!) The root cause is that vsock_find_bound_socket can't hold the lock_sock, so there is a small race window between vsock_find_bound_socket() and lock_sock(). If __vsock_release() is running in another task, sk->sk_socket will be set to NULL inadvertently. This fixes it by checking sk->sk_shutdown(suggested by Stefano) after lock_sock since sk->sk_shutdown is set to SHUTDOWN_MASK under the protection of lock_sock_nested. Signed-off-by:Jia He <justin.he@arm.com> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
-
- 30 May, 2020 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - a fix for the recent change to how we restore non-volatile GPRs, which broke our emulation of reading from the DSCR (Data Stream Control Register). - a fix for the recent rewrite of interrupt/syscall exit in C, we need to exclude KCOV from that code, otherwise it can lead to unrecoverable faults. Thanks to Daniel Axtens. * tag 'powerpc-5.7-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Disable sanitisers for C syscall/interrupt entry/exit code powerpc/64s: Fix restore of NV GPRs after facility unavailable exception
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: "Here are some (very) late fixes for GPIO, none of them very serious except the one tagged for stable for enabling IRQ on open drain lines: - Fix probing of mvebu chips without PWM - Fix error path on ida_get_simple() on the exar driver - Notify userspace properly about line status changes when flags are changed on lines. - Fix a sleeping while holding spinlock in the mellanox driver. - Fix return value of the PXA and Kona probe calls. - Fix IRQ locking of open drain lines, it is fine to have IRQs on open drain lines flagged for output" * tag 'gpio-v5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: fix locking open drain IRQ lines gpio: bcm-kona: Fix return value of bcm_kona_gpio_probe() gpio: pxa: Fix return value of pxa_gpio_probe() gpio: mlxbf2: Fix sleeping while holding spinlock gpiolib: notify user-space about line status changes after flags are set gpio: exar: Fix bad handling for ida_simple_get error path gpio: mvebu: Fix probing for chips without PWM -
Thomas Falcon authored
VNIC protocol version is reported in big-endian format, but it is not byteswapped before logging. Fix that, and remove version comparison as only one protocol version exists at this time. Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
-
Chuhong Yuan authored
st21nfca_tm_send_atr_res() misses to call kfree_skb() in an error path. Add the missed function call to fix it. Fixes: 1892bf84 ("NFC: st21nfca: Adding P2P support to st21nfca in Initiator & Target mode") Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
-
- 29 May, 2020 19 commits
-
-
Hangbin Liu authored
In commit 19e16d22 ("neigh: support smaller retrans_time settting") we add more accurate control for ARP and NS. But for ARP I forgot to update the latest guard in neigh_timer_handler(), then the next retransmit would be reset to jiffies + HZ/2 if we set the retrans_time less than 500ms. Fix it by setting the time_before() check to HZ/100. IPv6 does not have this issue. Reported-by:
Jianwen Ji <jiji@redhat.com> Fixes: 19e16d22 ("neigh: support smaller retrans_time settting") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5 fixes 2020-05-28 This series introduces some fixes to mlx5 driver. v1->v2: - Fix bad sha1, Jakub. - Added one more patch by Pablo. net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta() Nothing major, the only patch worth mentioning is the suspend/resume crash fix by adding the missing pci device handlers, the fix is very straight forward and as Dexuan already expressed, the patch is important for Azure users to avoid crash on VM hibernation, patch is marked for -stable v4.6 below. Conflict note: ('net/mlx5e: Fix MLX5_TC_CT dependencies') has a trivial one line conflict with current net-next, which can be resolved by simply using the line from net-next. Please pull and let me know if there is any problem. For -stable v4.6 ('net/mlx5: Fix crash upon suspend/resume') For -stable v5.6 ('net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta()') ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "This time there is one fix for the error path in the mediatek cmdq driver (used by their video driver) and a couple of devicetree fixes, mostly for 32-bit ARM, and fairly harmless: - On OMAP2 there were a few regressions in the ethernet drivers, one of them leading to an external abort trap - One Raspberry Pi version had a misconfigured LED - Interrupts on Broadcom NSP were slightly misconfigured - One i.MX6q board had issues with graphics mode setting - On mmp3 there are some minor fixes that were submitted for v5.8 with a cc:stable tag, so I ended up picking them up here as well - The Mediatek Video Codec needs to run at a higher frequency than configured originally" * tag 'armsoc-fixes-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: mmp3: Drop usb-nop-xceiv from HSIC phy ARM: dts: mmp3-dell-ariel: Fix the SPI devices ARM: dts: mmp3: Use the MMP3 compatible string for /clocks ARM: dts: bcm: HR2: Fix PPI interrupt types ARM: dts: bcm2835-rpi-zero-w: Fix led polarity ARM: dts/imx6q-bx50v3: Set display interface clock parents soc: mediatek: cmdq: return send msg error code arm64: dts: mt8173: fix vcodec-enc clock ARM: dts: Fix wrong mdio clock for dm814x ARM: dts: am437x: fix networking on boards with ksz9031 phy ARM: dts: am57xx: fix networking on boards with ksz9031 phy -
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf 2020-05-29 The following pull-request contains BPF updates for your *net* tree. We've added 6 non-merge commits during the last 7 day(s) which contain a total of 4 files changed, 55 insertions(+), 34 deletions(-). The main changes are: 1) minor verifier fix for fmod_ret progs, from Alexei. 2) af_xdp overflow check, from Bjorn. 3) minor verifier fix for 32bit assignment, from John. 4) powerpc has non-overlapping addr space, from Petr. ==================== Signed-off-by: -
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fixes from Ilya Dryomov: "Cache tiering and cap handling fixups, both marked for stable" * tag 'ceph-for-5.7-rc8' of git://github.com/ceph/ceph-client: ceph: flush release queue when handling caps for unknown inode libceph: ignore pool overlay and cache logic on redirects
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 fix from Andreas Gruenbacher: "Fix the previous, flawed gfs2_find_jhead commit" * tag 'gfs2-v5.7-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Even more gfs2_find_jhead fixes
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fix from Catalin Marinas: "Ensure __cpu_up() returns an error if cpu_online() is false after waiting for completion on cpu_running" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/kernel: Fix return value when cpu_online() fails in __cpu_up()
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fix from Helge Deller: "Fix a kernel panic at boot time for some HP-PARISC machines" * 'parisc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix kernel panic in mem_init()
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull iommu fixes from Joerg Roedel: - Two build fixes for issues introduced during the merge window - A fix for a reference count leak in an error path of iommu_group_alloc() * tag 'iommu-fixes-v5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu: Fix reference count leak in iommu_group_alloc. x86: Hide the archdata.iommu field behind generic IOMMU_API ia64: Hide the archdata.iommu field behind generic IOMMU_API
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Two small fixes: - Revert a block change that mixed up the return values for non-mq devices - NVMe poll race fix" * tag 'block-5.7-2020-05-29' of git://git.kernel.dk/linux-block: Revert "block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT" nvme-pci: avoid race between nvme_reap_pending_cqes() and nvme_poll() -
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "Nothing profound here, just a last set of long standing bug fixes: - Incorrect error unwind in qib and pvrdma - User triggerable NULL pointer crash in mlx5 with ODP prefetch - syzkaller RCU race in uverbs - Rare double free crash in ipoib" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/ipoib: Fix double free of skb in case of multicast traffic in CM mode RDMA/core: Fix double destruction of uobject RDMA/pvrdma: Fix missing pci disable in pvrdma_pci_probe() RDMA/mlx5: Fix NULL pointer dereference in destroy_prefetch_work IB/qib: Call kobject_put() when kobject_init_and_add() fails
-
John Fastabend authored
Added a verifier test for assigning 32bit reg states to 64bit where 32bit reg holds a constant value of 0. Without previous kernel verifier.c fix, the test in this patch will fail. Signed-off-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/159077335867.6014.2075350327073125374.stgit@john-Precision-5820-Tower
-
John Fastabend authored
After previous fix for zero extension test_verifier tests #65 and #66 now fail. Before the fix we can see the alu32 mov op at insn 10 10: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP(id=0, smin_value=4294967168,smax_value=4294967423, umin_value=4294967168,umax_value=4294967423, var_off=(0x0; 0x1ffffffff), s32_min_value=-2147483648,s32_max_value=2147483647, u32_min_value=0,u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm 10: (bc) w1 = w1 11: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP(id=0, smin_value=0,smax_value=2147483647, umin_value=0,umax_value=4294967295, var_off=(0x0; 0xffffffff), s32_min_value=-2147483648,s32_max_value=2147483647, u32_min_value=0,u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm After the fix at insn 10 because we have 's32_min_value < 0' the following step 11 now has 'smax_value=U32_MAX' where before we pulled the s32_max_value bound into the smax_value as seen above in 11 with smax_value=2147483647. 10: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv(id=0, smin_value=4294967168,smax_value=4294967423, umin_value=4294967168,umax_value=4294967423, var_off=(0x0; 0x1ffffffff), s32_min_value=-2147483648, s32_max_value=2147483647, u32_min_value=0,u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm 10: (bc) w1 = w1 11: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv(id=0, smin_value=0,smax_value=4294967295, umin_value=0,umax_value=4294967295, var_off=(0x0; 0xffffffff), s32_min_value=-2147483648, s32_max_value=2147483647, u32_min_value=0, u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm The fall out of this is by the time we get to the failing instruction at step 14 where previously we had the following: 14: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv(id=0, smin_value=72057594021150720,smax_value=72057594029539328, umin_value=72057594021150720,umax_value=72057594029539328, var_off=(0xffffffff000000; 0xffffff), s32_min_value=-16777216,s32_max_value=-1, u32_min_value=-16777216,u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm 14: (0f) r0 += r1 We now have, 14: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv(id=0, smin_value=0,smax_value=72057594037927935, umin_value=0,umax_value=72057594037927935, var_off=(0x0; 0xffffffffffffff), s32_min_value=-2147483648,s32_max_value=2147483647, u32_min_value=0,u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm 14: (0f) r0 += r1 In the original step 14 'smin_value=72057594021150720' this trips the logic in the verifier function check_reg_sane_offset(), if (smin >= BPF_MAX_VAR_OFF || smin <= -BPF_MAX_VAR_OFF) { verbose(env, "value %lld makes %s pointer be out of bounds\n", smin, reg_type_str[type]); return false; } Specifically, the 'smin <= -BPF_MAX_VAR_OFF' check. But with the fix at step 14 we have bounds 'smin_value=0' so the above check is not tripped because BPF_MAX_VAR_OFF=1<<29. We have a smin_value=0 here because at step 10 the smaller smin_value=0 means the subtractions at steps 11 and 12 bring the smin_value negative. 11: (17) r1 -= 2147483584 12: (17) r1 -= 2147483584 13: (77) r1 >>= 8 Then the shift clears the top bit and smin_value is set to 0. Note we still have the smax_value in the fixed code so any reads will fail. An alternative would be to have reg_sane_check() do both smin and smax value tests. To fix the test we can omit the 'r1 >>=8' at line 13. This will change the err string, but keeps the intention of the test as suggseted by the title, "check after truncation of boundary-crossing range". If the verifier logic changes a different value is likely to be thrown in the error or the error will no longer be thrown forcing this test to be examined. With this change we see the new state at step 13. 13: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP(id=0, smin_value=-4294967168,smax_value=127, umin_value=0,umax_value=18446744073709551615, s32_min_value=-2147483648,s32_max_value=2147483647, u32_min_value=0,u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm Giving the expected out of bounds error, "value -4294967168 makes map_value pointer be out of bounds" However, for unpriv case we see a different error now because of the mixed signed bounds pointer arithmatic. This seems OK so I've only added the unpriv_errstr for this. Another optino may have been to do addition on r1 instead of subtraction but I favor the approach above slightly. Signed-off-by: -
John Fastabend authored
With the latest trunk llvm (llvm 11), I hit a verifier issue for test_prog subtest test_verif_scale1. The following simplified example illustrate the issue: w9 = 0 /* R9_w=inv0 */ r8 = *(u32 *)(r1 + 80) /* __sk_buff->data_end */ r7 = *(u32 *)(r1 + 76) /* __sk_buff->data */ ...... w2 = w9 /* R2_w=inv0 */ r6 = r7 /* R6_w=pkt(id=0,off=0,r=0,imm=0) */ r6 += r2 /* R6_w=inv(id=0) */ r3 = r6 /* R3_w=inv(id=0) */ r3 += 14 /* R3_w=inv(id=0) */ if r3 > r8 goto end r5 = *(u32 *)(r6 + 0) /* R6_w=inv(id=0) */ <== error here: R6 invalid mem access 'inv' ... end: In real test_verif_scale1 code, "w9 = 0" and "w2 = w9" are in different basic blocks. In the above, after "r6 += r2", r6 becomes a scalar, which eventually caused the memory access error. The correct register state should be a pkt pointer. The inprecise register state starts at "w2 = w9". The 32bit register w9 is 0, in __reg_assign_32_into_64(), the 64bit reg->smax_value is assigned to be U32_MAX. The 64bit reg->smin_value is 0 and the 64bit register itself remains constant based on reg->var_off. In adjust_ptr_min_max_vals(), the verifier checks for a known constant, smin_val must be equal to smax_val. Since they are not equal, the verifier decides r6 is a unknown scalar, which caused later failure. The llvm10 does not have this issue as it generates different code: w9 = 0 /* R9_w=inv0 */ r8 = *(u32 *)(r1 + 80) /* __sk_buff->data_end */ r7 = *(u32 *)(r1 + 76) /* __sk_buff->data */ ...... r6 = r7 /* R6_w=pkt(id=0,off=0,r=0,imm=0) */ r6 += r9 /* R6_w=pkt(id=0,off=0,r=0,imm=0) */ r3 = r6 /* R3_w=pkt(id=0,off=0,r=0,imm=0) */ r3 += 14 /* R3_w=pkt(id=0,off=14,r=0,imm=0) */ if r3 > r8 goto end ... To fix the above issue, we can include zero in the test condition for assigning the s32_max_value and s32_min_value to their 64-bit equivalents smax_value and smin_value. Further, fix the condition to avoid doing zero extension bounds checks when s32_min_value <= 0. This could allow for the case where bounds 32-bit bounds (-1,1) get incorrectly translated to (0,1) 64-bit bounds. When in-fact the -1 min value needs to force U32_MAX bound. Fixes: 3f50f132 ("bpf: Verifier, do explicit ALU32 bounds tracking") Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "MMC core: - Fix use-after-free issue for rpmb partition MMC host: - Fix quirk for broken CQE support" * tag 'mmc-v5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: block: Fix use-after-free issue for rpmb mmc: sdhci: Fix SDHCI_QUIRK_BROKEN_CQE
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Only a few last-minute small fixes: the change in ALSA core hwdep is about the undefined behavior of bit shift, which is almost harmless but still worth to pick up quickly. The rest are all device-specific fixes for HD-audio and USB-audio, and safe to apply at the late stage" * tag 'sound-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Add new codec supported for ALC287 ALSA: usb-audio: Quirks for Gigabyte TRX40 Aorus Master onboard audio ALSA: usb-audio: mixer: volume quirk for ESS Technology Asus USB DAC ALSA: hda/realtek - Add a model for Thinkpad T570 without DAC workaround ALSA: hwdep: fix a left shifting 1 by 31 UB bug
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "Two fixes for the new SM8150 and SM8250 Qualcomm clk drivers to fix a randconfig build error and an incorrect parent mapping" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: gcc: Fix parent for gpll0_out_even clk: qcom: sm8250 gcc depends on QCOM_GDSC
-
Alexei Starovoitov authored
Fix the following issue: [ 436.749342] BUG: KASAN: use-after-free in bpf_trampoline_put+0x39/0x2a0 [ 436.749995] Write of size 4 at addr ffff8881ef38b8a0 by task kworker/3:5/2243 [ 436.750712] [ 436.752677] Workqueue: events bpf_prog_free_deferred [ 436.753183] Call Trace: [ 436.756483] bpf_trampoline_put+0x39/0x2a0 [ 436.756904] bpf_prog_free_deferred+0x16d/0x3d0 [ 436.757377] process_one_work+0x94a/0x15b0 [ 436.761969] [ 436.762130] Allocated by task 2529: [ 436.763323] bpf_trampoline_lookup+0x136/0x540 [ 436.763776] bpf_check+0x2872/0xa0a8 [ 436.764144] bpf_prog_load+0xb6f/0x1350 [ 436.764539] __do_sys_bpf+0x16d7/0x3720 [ 436.765825] [ 436.765988] Freed by task 2529: [ 436.767084] kfree+0xc6/0x280 [ 436.767397] bpf_trampoline_put+0x1fd/0x2a0 [ 436.767826] bpf_check+0x6832/0xa0a8 [ 436.768197] bpf_prog_load+0xb6f/0x1350 [ 436.768594] __do_sys_bpf+0x16d7/0x3720 prog->aux->trampoline = tr should be set only when prog is valid. Otherwise prog freeing will try to put trampoline via prog->aux->trampoline, but it may not point to a valid trampoline. Fixes: 6ba43b76 ("bpf: Attachment verification for BPF_MODIFY_RETURN") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
KP Singh <kpsingh@google.com> Link: https://lore.kernel.org/bpf/20200529043839.15824-2-alexei.starovoitov@gmail.com
-
Pablo Neira Ayuso authored
The drivers reports EINVAL to userspace through netlink on invalid meta match. This is confusing since EINVAL is usually reserved for malformed netlink messages. Replace it by more meaningful codes. Fixes: 6d65bc64 ("net/mlx5e: Add mlx5e_flower_parse_meta support") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
