The inner/outer modes were added to abstract out common code that
were once duplicated between IPv4 and IPv6.  As time went on the
abstractions have been removed and we are now left with empty
shells that only contain duplicate information.  These can be
removed one-by-one as the same information is already present
elsewhere in the xfrm_state object.

Removing them from the input path actually allows certain valid
combinations that are currently disallowed.  In particular, when
a transport mode SA sits beneath a tunnel mode SA that changes
address families, at present the transport mode SA cannot have
AF_UNSPEC as its selector because it will be erroneously be treated
as inter-family itself even though it simply sits beneath one.

This is a serious problem because you can't set the selector to
non-AF_UNSPEC either as that will cause the selector match to
fail as we always match selectors to the inner-most traffic.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

make versioncheck reports the following:
./drivers/net/ethernet/qlogic/qede/qede.h: 10 linux/version.h not needed.
./drivers/net/ethernet/qlogic/qede/qede_ethtool.c: 7 linux/version.h not needed.

So remove linux/version.h from both of these files. Also remove
linux/compiler.h while at it as it is also not being used.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230309225206.2473644-1-usama.anjum@collabora.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

EF100 can pop and/or push up to two VLAN tags.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230309115904.56442-1-edward.cree@amd.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Siddharth Vadapalli says:

====================
Update CPSW bindings for Serdes PHY

This series adds documentation for the Serdes PHY. Also, the name used to
refer to the Serdes PHY in the am65-cpsw driver is updated to match the
documented name.

Documenting the Serdes PHY bindings was missed out in the already merged
series at:
https://lore.kernel.org/r/20230104103432.1126403-1-s-vadapalli@ti.com/
This miss was pointed out at:
https://lore.kernel.org/r/CAMuHMdW5atq-FuLEL3htuE3t2uO86anLL3zeY7n1RqqMP_rH1g@mail.gmail.com/

v2:
https://lore.kernel.org/r/20230308051835.276552-1-s-vadapalli@ti.com/
v1:
https://lore.kernel.org/r/20230306094750.159657-1-s-vadapalli@ti.com/
====================

Link: https://lore.kernel.org/r/20230309073612.431287-1-s-vadapalli@ti.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The bindings for the am65-cpsw driver use the name "serdes" to refer to
the Serdes PHY. Thus, update the name used for the Serdes PHY within the
am65_cpsw_init_serdes_phy() function from "serdes-phy" to "serdes".
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Update bindings to include Serdes PHY as an optional PHY, in addition to
the existing CPSW MAC's PHY. The CPSW MAC's PHY is required while the
Serdes PHY is optional. The Serdes PHY handle has to be provided only
when the Serdes is being configured in a Single-Link protocol. Using the
name "serdes-phy" to represent the Serdes PHY handle, the am65-cpsw-nuss
driver can obtain the Serdes PHY and request the Serdes to be
configured.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Flashing firmware via devlink flash was failing on PTP OCP devices
because it is using Quad SPI mode, but the driver was not properly
behaving. With force_irq flag landed it now can be fixed.
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://lore.kernel.org/r/20230309105421.2953451-1-vadfed@meta.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-next-2023-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Johannes Berg says:

====================
wireless-next patches for 6.4

Major changes:

cfg80211
 * 6 GHz improvements
 * HW timestamping support
 * support for randomized auth/deauth TA for PASN privacy
   (also for mac80211)

mac80211
 * radiotap TLV and EHT support for the iwlwifi sniffer
 * HW timestamping support
 * per-link debugfs for multi-link

brcmfmac
 * support for Apple (M1 Pro/Max) devices

iwlwifi
 * support for a few new devices
 * EHT sniffer support

rtw88
 * better support for some SDIO devices
   (e.g. MAC address from efuse)

rtw89
 * HW scan support for 8852b
 * better support for 6 GHz scanning

* tag 'wireless-next-2023-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (84 commits)
  wifi: iwlwifi: mvm: fix EOF bit reporting
  wifi: iwlwifi: Do not include radiotap EHT user info if not needed
  wifi: iwlwifi: mvm: add EHT RU allocation to radiotap
  wifi: iwlwifi: Update logs for yoyo reset sw changes
  wifi: iwlwifi: mvm: clean up duplicated defines
  wifi: iwlwifi: rs-fw: break out for unsupported bandwidth
  wifi: iwlwifi: Add support for B step of BnJ-Fm4
  wifi: iwlwifi: mvm: make flush code a bit clearer
  wifi: iwlwifi: mvm: avoid UB shift of snif_queue
  wifi: iwlwifi: mvm: add primary 80 known for EHT radiotap
  wifi: iwlwifi: mvm: parse FW frame metadata for EHT sniffer mode
  wifi: iwlwifi: mvm: decode USIG_B1_B7 RU to nl80211 RU width
  wifi: iwlwifi: mvm: rename define to generic name
  wifi: iwlwifi: mvm: allow Microsoft to use TAS
  wifi: iwlwifi: mvm: add all EHT based on data0 info from HW
  wifi: iwlwifi: mvm: add EHT radiotap info based on rate_n_flags
  wifi: iwlwifi: mvm: add an helper function radiotap TLVs
  wifi: radiotap: separate vendor TLV into header/content
  wifi: iwlwifi: reduce verbosity of some logging events
  wifi: iwlwifi: Adding the code to get RF name for MsP device
  ...
====================

Link: https://lore.kernel.org/r/20230310120159.36518-1-johannes@sipsolutions.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Russell King says:

====================
Rework SFP A2 access conditionals

This series reworks the SFP A2 (diagnostics and control) access so we
don't end up testing a variable number of conditions in several places.

This also resolves a minor issue where we may have a module indicating
that it is not SFF8472 compliant, doesn't implement A2, but fails to
set the enhanced option byte to zero, leading to accesses to the A2
page that fail.

The first patch adds a new flag "have_a2" which indicates whether we
should be accessing the A2 page, and uses this for hwmon. The
conditions are kept the same.

The second patch extends the check for soft-state polling and control
by using this "have_a2" flag (which effectively augments the check to
include some level of SFF8472 compliance.)
====================

Link: https://lore.kernel.org/r/ZAoBnqGBnIZzLwpV@shell.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The soft state bits are stored in the A2h memory space, and require
SFF-8472 compliance. This is what our have_a2 flag tells us, so use
this to indicate whether we should attempt to use the soft signals.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The hwmon code wants to know when it is safe to access the A2h data
stored in a separate address. We indicate that this is present when
we have SFF-8472 compliance and the lack of an address-change
sequence.,

The same conditions are also true if we want to access other controls
and status in the A2h address. So let's make a flag to indicate whether
we can access it, instead of repeating the conditions throughout the
code.

For now, only convert the hwmon code.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Gal Pressman says:

====================
Couple of minor improvements to build_skb variants

First patch replaces open-coded occurrences of
skb_propagate_pfmemalloc() in build_skb() and build_skb_around().
The secnod patch adds a likely() to the skb allocation in build_skb().
====================

Link: https://lore.kernel.org/r/20230308131720.2103611-1-gal@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Similarly to napi_build_skb(), it is likely the skb allocation in
build_skb() succeeded. frag_size != 0 is also likely, as stated in
__build_skb_around().
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Use skb_propagate_pfmemalloc() in build_skb()/build_skb_around() instead
of open-coding it.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The tap driver already supports passing in nonblocking state based
on O_NONBLOCK, add support for checking IOCB_NOWAIT as well. With that
done, we can flag it with FMODE_NOWAIT as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/8f859870-e6e2-09ca-9c0f-a2aa7c984fb2@kernel.dkSigned-off-by: Jakub Kicinski <kuba@kernel.org>

tun already checks for both O_NONBLOCK and IOCB_NOWAIT in its read
and write iter handlers, so it's fully ready for FMODE_NOWAIT. But
for some reason it doesn't set it. Rectify that oversight.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/3f7dc1f0-79ca-d85c-4d16-8c12c5bd492d@kernel.dkSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Horatiu Vultur says:

====================
net: lan966x: Add support for IS1 VCAP

Provide the Ingress Stage 1 (IS1) VCAP (Versatile Content-Aware
Processor) support for the Lan966x platform.

The IS1 VCAP has 3 lookups and they are accessible with a TC chain id:
- chain 1000000: IS1 Lookup 0
- chain 1100000: IS1 Lookup 1
- chain 1200000: IS1 Lookup 2

The IS1 is capable of different actions like rewrite VLAN tags, change
priority of the frames, police the traffic, etc. These features will be
added at a later point.

The IS1 currently implements the action that allows setting the value
of a PAG (Policy Association Group) key field in the frame metadata and
this can be used for matching in an IS2 VCAP rule. In this way a rule in
IS0 VCAP can be linked to rules in the IS2 VCAP. The linking is exposed
by using the TC "goto chain" action with an offset from the IS2 chain ids.
For example "goto chain 8000001" will use a PAG value of 1 to chain to a
rule in IS2 lookup 0.
====================

Link: https://lore.kernel.org/r/20230307220929.834219-1-horatiu.vultur@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

IS1 VCAP has it's own list of supported ethernet protocol types which is
different than the IS2 VCAP. Therefore separate the list of known
protocol types based on the VCAP type.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Allow rules to be chained between IS1 VCAP and IS2 VCAP. Chaining
between IS1 lookups or between IS2 lookups are not supported by the
hardware.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Enable TC command to use IS1 VCAP
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add IS1 VCAP port keyset configuration for lan966x and also update debug
fs support to show the keyset configuration.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Provide IS1 (ingress stage 1) VCAP model for lan966x.
This provides classification actions for lan966x.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

NVMEM layouts are no longer registered early, and thus may not yet be
available when Ethernet drivers (or any other consumer) probe, leading
to possible probe deferrals errors. Forward the error code if this
happens. All other errors being discarded, the driver will eventually
use a random MAC address if no other source was considered valid (no
functional change on this regard).
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Marcin Wojtas <mw@semihalf.com>
Link: https://lore.kernel.org/r/20230307192927.512757-1-miquel.raynal@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The filename "wangxun" sorts between "intel" and "xscale", but
xscale/Kconfig contains "Intel XScale" prompts, so Wangxun ends up in the
wrong place in the config front-ends.

Move wangxun/Kconfig so the Wangxun devices appear in order in the user
interface.

Fixes: 3ce7547e ("net: txgbe: Add build support for txgbe")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230307221051.890135-1-helgaas@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-03-07 (igc)

This series contains updates to igc driver only.

Muhammad adds tracking and reporting of QBV config errors.

Tan Tee adds support for configuring max SDU for each Tx queue.

Sasha removes check for alternate media as only one media type is
supported.

* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  igc: Clean up and optimize watchdog task
  igc: offload queue max SDU from tc-taprio
  igc: Add qbv_config_change_errors counter
====================

Link: https://lore.kernel.org/r/20230307221332.3997881-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Keep the accounting schema consistent across different protocols
with __sk_mem_schedule(). Besides, it adjusts a little bit on how
to calculate forward allocated memory compared to before. After
applied this patch, we could avoid receive path scheduling extra
amount of memory.

Link: https://lore.kernel.org/lkml/20230221110344.82818-1-kerneljasonxing@gmail.com/Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230308021153.99777-1-kerneljasonxing@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Florian Westphal says:

====================
Netfilter updates for net-next

1. nf_tables 'brouting' support, from Sriram Yagnaraman.

2. Update bridge netfilter and ovs conntrack helpers to handle
   IPv6 Jumbo packets properly, i.e. fetch the packet length
   from hop-by-hop extension header, from Xin Long.

   This comes with a test BIG TCP test case, added to
   tools/testing/selftests/net/.

3. Fix spelling and indentation in conntrack, from Jeremy Sowden.

* 'main' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
  netfilter: nat: fix indentation of function arguments
  netfilter: conntrack: fix typo
  selftests: add a selftest for big tcp
  netfilter: use nf_ip6_check_hbh_len in nf_ct_skb_network_trim
  netfilter: move br_nf_check_hbh_len to utils
  netfilter: bridge: move pskb_trim_rcsum out of br_nf_check_hbh_len
  netfilter: bridge: check len before accessing more nh data
  netfilter: bridge: call pskb_may_pull in br_nf_check_hbh_len
  netfilter: bridge: introduce broute meta statement
====================

Link: https://lore.kernel.org/r/20230308193033.13965-1-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use the new devm_of_phy_optional_get() helper instead of open-coding the
same operation.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/01605ea233ff7fc09bb0ea34fc8126af73db83f9.1678280599.git.geert+renesas@glider.beSigned-off-by: Jakub Kicinski <kuba@kernel.org>

neigh_lookup_nodev isn't used in the kernel after removal
of DECnet. So let's remove it.

Fixes: 1202cdd6 ("Remove DECnet support from kernel")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/eb5656200d7964b2d177a36b77efa3c597d6d72d.1678267343.git.leonro@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This field mirrors hrtimer softexpires, we can instead
use the existing helpers.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230308182648.1150762-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Simplify the code by using phy_set_bits().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/b64d9f86-d029-b911-bbe9-6ca6889399d7@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

No users in the tree.  Tested with allmodconfig build.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230308142006.20879-1-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since commit 8b41fc44 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.

So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20230308121230.5354-1-nick.alcock@oracle.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since commit 8b41fc44 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.

So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Jeremy Kerr <jk@codeconstruct.com.au>
Cc: Matt Johnston <matt@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20230308121230.5354-2-nick.alcock@oracle.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Documentation/bpf/bpf_devel_QA.rst
  b7abcd9c ("bpf, doc: Link to submitting-patches.rst for general patch submission info")
  d56b0c46 ("bpf, docs: Fix link to netdev-FAQ target")
https://lore.kernel.org/all/20230307095812.236eb1be@canb.auug.org.au/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from netfilter and bpf.

  Current release - regressions:

   - core: avoid skb end_offset change in __skb_unclone_keeptruesize()

   - sched:
      - act_connmark: handle errno on tcf_idr_check_alloc
      - flower: fix fl_change() error recovery path

   - ieee802154: prevent user from crashing the host

  Current release - new code bugs:

   - eth: bnxt_en: fix the double free during device removal

   - tools: ynl:
      - fix enum-as-flags in the generic CLI
      - fully inherit attrs in subsets
      - re-license uniformly under GPL-2.0 or BSD-3-clause

  Previous releases - regressions:

   - core: use indirect calls helpers for sk_exit_memory_pressure()

   - tls:
      - fix return value for async crypto
      - avoid hanging tasks on the tx_lock

   - eth: ice: copy last block omitted in ice_get_module_eeprom()

  Previous releases - always broken:

   - core: avoid double iput when sock_alloc_file fails

   - af_unix: fix struct pid leaks in OOB support

   - tls:
      - fix possible race condition
      - fix device-offloaded sendpage straddling records

   - bpf:
      - sockmap: fix an infinite loop error
      - test_run: fix &xdp_frame misplacement for LIVE_FRAMES
      - fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR

   - netfilter: tproxy: fix deadlock due to missing BH disable

   - phylib: get rid of unnecessary locking

   - eth: bgmac: fix *initial* chip reset to support BCM5358

   - eth: nfp: fix csum for ipsec offload

   - eth: mtk_eth_soc: fix RX data corruption issue

  Misc:

   - usb: qmi_wwan: add telit 0x1080 composition"

* tag 'net-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
  tools: ynl: fix enum-as-flags in the generic CLI
  tools: ynl: move the enum classes to shared code
  net: avoid double iput when sock_alloc_file fails
  af_unix: fix struct pid leaks in OOB support
  eth: fealnx: bring back this old driver
  net: dsa: mt7530: permit port 5 to work without port 6 on MT7621 SoC
  net: microchip: sparx5: fix deletion of existing DSCP mappings
  octeontx2-af: Unlock contexts in the queue context cache in case of fault detection
  net/smc: fix fallback failed while sendmsg with fastopen
  ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause
  mailmap: update entries for Stephen Hemminger
  mailmap: add entry for Maxim Mikityanskiy
  nfc: change order inside nfc_se_io error path
  ethernet: ice: avoid gcc-9 integer overflow warning
  ice: don't ignore return codes in VSI related code
  ice: Fix DSCP PFC TLV creation
  net: usb: qmi_wwan: add Telit 0x1080 composition
  net: usb: cdc_mbim: avoid altsetting toggling for Telit FE990
  netfilter: conntrack: adopt safer max chain length
  net: tls: fix device-offloaded sendpage straddling records
  ...

Pull HID fixes from Benjamin Tissoires:

 - fix potential out of bound write of zeroes in HID core with a
   specially crafted uhid device (Lee Jones)

 - fix potential use-after-free in work function in intel-ish-hid (Reka
   Norman)

 - selftests config fixes (Benjamin Tissoires)

 - few device small fixes and support

* tag 'for-linus-2023030901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: intel-ish-hid: ipc: Fix potential use-after-free in work function
  HID: logitech-hidpp: Add support for Logitech MX Master 3S mouse
  HID: cp2112: Fix driver not registering GPIO IRQ chip as threaded
  selftest: hid: fix hid_bpf not set in config
  HID: uhid: Over-ride the default maximum data buffer value with our own
  HID: core: Provide new max_buffer_size attribute to over-ride the default

Pull m68k fixes from Geert Uytterhoeven:

 - Fix systems with memory at end of 32-bit address space

 - Fix initrd on systems where memory does not start at address zero

 - Fix 68030 handling of bus errors for addresses in exception tables

* tag 'm68k-for-v6.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Only force 030 bus error if PC not in exception table
  m68k: mm: Move initrd phys_to_virt handling after paging_init()
  m68k: mm: Fix systems with memory at end of 32-bit address space

We fetch %SR value from sigframe; it might have been modified by signal
handler, so we can't trust it with any bits that are not modifiable in
user mode.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-03-07 (ice)

This series contains updates to ice driver only.

Dave removes masking from pfcena field as it was incorrectly preventing
valid traffic classes from being enabled.

Michal resolves various smatch issues such as not propagating error
codes and returning 0 explicitly.

Arnd Bergmann resolves gcc-9 warning for integer overflow.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ethernet: ice: avoid gcc-9 integer overflow warning
  ice: don't ignore return codes in VSI related code
  ice: Fix DSCP PFC TLV creation
====================

Link: https://lore.kernel.org/r/20230307220714.3997294-1-anthony.l.nguyen@intel.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>