Remove the unneeded controlvm_respond_chipset_init prototype by
moving the functions controlvm_init_response and
controlvm_respond_chipset_init up in the file.
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the unneeded prototype for controlvm_respond.
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function parahotplug_process_list needs to be moved lower in the file
to avoid extraneous function prototypes.
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function read_controlvm_event needs to be moved lower in the file
to avoid extraneous function prototypes.
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Handle_command gets moved lower in the file to avoid the need for
extraneous function prototypes.
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move controlvm_periodic_work lower in the file to avoid having
to create function prototypes.
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch moves the unsigned long controlvm_payload_bytes_buffered
from the module parameters location to a more appropriate location
below the controlvm_payload_info.
Signed-off-by: Jon Frisch <jon.frisch@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes the unused u32 dump_vhba_bus.
Signed-off-by: Jon Frisch <jon.frisch@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes the unused long long bus_count.
Signed-off-by: Jon Frisch <jon.frisch@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes the unused module parameter
visorchipset_visorbusregwait
Signed-off-by: Jon Frisch <jon.frisch@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As suggested by checkpatch.pl:

CHECK: Prefer kernel type 'u16' over 'uint16_t'
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As suggested by checkpatch.pl:

CHECK: Prefer kernel type 'u8' over 'uint8_t'
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch warning:

WARNING: Avoid unnecessary line continuations
Signed-off-by: Anchal Jain <anchalj109@gmail.com>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added __acquires / __releases sparse locking annotations
to lock_res_and_lock() and unlock_res_and_lock() functions
in l_lock.c, to fix below sparse warnings:

l_lock.c:47:22: warning: context imbalance in 'lock_res_and_lock' - wrong count at exit
l_lock.c:61:6: warning: context imbalance in 'unlock_res_and_lock' - unexpected unlock
Signed-off-by: Nayeemahmed Badebade <itachi.opsrc@gmail.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

filp != NULL is already checked, so no need to check it again.
Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert array index from the loop bound to the loop index.

The structure cl_env_percpu[NR_CPUS] has been initializing for each possible
cpu (i.e 0 to i). During initialization if any error will occurred, the error
handling code should uninitialize cl_env_percpu upto i. But currently
unitialization is repeatedly done for the same cl_env_percpu[i] element.
This does not seems to be correct.

Used below semantic patch to identify this issue:

@@
expression e1,e2,ar;
@@
for(e1 = 0; e1 < e2; e1++) { <...
  ar[
- e2
+ e1
  ]
  ...> }
Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add bod to some Greybus protocol drivers maintainers, loopback and
timesync.
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

To increase comprehension this patch renames the channel related
spinlock with a more fitting name.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes the calls to usb_unanchor_urb() from the completion
routines, since disassociation of the URBs is already handles by the
USB subsystem.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes the spinlocks when accessing the usb_anchor list,
because the struct usb_anchor is using its own lock.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes the propietary tracking of URBs. Instead the structure
usb_anchor of the USB subsystem is used.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-4.9c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Third set of new device support, functionality and cleanups for IIO in the 4.9 cycle.

Given Linus is hinting (strongly!) at an rc8 this last set is hopefully in
time for the 4.9 merge window.  The zpa2326 and si1145 drivers provide
fine illustrations that devices aren't getting any simpler!

I'm also particularly pleased Linus Walliej did such a thorough job of cleaning
up one of my old drivers.

New device support
* mCube MC3230 accelerometer
  - new fairly minimal driver.
* Murata zpa2326
  - extensive new driver supporting the rather 'novel' buffering of data this
    device provides and handling both it's own data ready trigger and other
    triggers rather elegantly.
* si1141, si1142, si1143, si1145, si1146 and si1147 proximity, UV, visible and
  IR sensors.
  - another extensive new driver supporting all the key bits of what this
    set of devices supplies including dataready triggers, buffers and all the
    various data channels.

Functionality
* kxsd9 - Linus brought this scratch driver I wrote in one afternoon years ago
  up to date adding lots of good stuff along the way.
  - SPI support after extensive rework of the driver.
  - Triggered buffer capture support.
  - Runtime PM.
  - Regulator handling.
  - Mounting matrix support.
* mma7660
  - Add MODULE_DEVICE_TABLE to support autoprobing.

Cleanups
* ad5933
  - Align some function arguements nicely.
* med_z188
  - Constify iio_info structure.
* sca3000
  - Implement IIO_CHAN_INFO_SAMP_FREQ rather than a hand rolled attr.
    There are still quite a few drivers that would benefit from similar updates.
* ssp_sensors
  - Constify iio_info structures in accel and gyro drivers.

This merges the greybus branch into staging-testing.  It contains the
drivers/staging/greybus/ subsystem and related drivers and has passed
the 0-day bot tests so no builds should break.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add me to some Greybus protocol drivers maintainers, spi, sdio, power
supply, light and gpio.
Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Johan and Alex and I are going to maintain the greybus code, so add it
to MAINTAINERS so we get cc:ed on patches.
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Alex Elder <elder@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The last thing remaining in kernel_ver.h was the setting of
CONFIG_PM_RUNTIME, which isn't needed in a in-tree implementation.  So
remove the setting of this value, and the .h file entirely as that was
the last thing left in it.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Remove BROKEN keyword to allow the light driver to be select now that
we fixed the kernel version dependencies. Also fix the module name in
the help section.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Greybus SPI driver depends on gb-spilib and we need to state that at
makefile to make it link correctly.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

No need to support older kernel versions in the Greybus Power Supply
driver, so remove the checks as needed, we can now rely on all of the
correct Power Supply core apis being present. Also move some properties
definitions to the power supply greybus code.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

No need to support older kernel versions in the Greybus SDIO driver, so
remove the checks as needed, we can now rely on all of the correct SDIO
core apis being present.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

No need to support older kernel versions in the Greybus Light driver, so
remove the checks as needed, we can now rely on all of the correct LED
core apis being present. And compile only if flash and v4l2 flash is
reachable.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The 0-day bot pointed out a type difference in one min() call, so fix it
up by being explicit about the type being compared.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

No need to support older kernel versions in the Greybus SPI and spilib
driver, so remove the checks as needed, we can now rely on all of the
correct SPI core apis being present.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The GPIO dependancy is CONFIG_GPIOLIB, not CONFIG_GPIO, no wonder it
wasn't building properly...
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

No need to support older kernel versions in the Greybus GPIO driver, so
remove the checks as needed, we can now rely on all of the correct
GPIO core apis being present.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

No need to support older kernel versions in the Greybus Vibrator driver,
so remove the checks as needed, we can now rely on all of the correct
driver core apis being present.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

No need to support older kernel versions in the Greybus HID driver, so
remove the checks as needed, we can now rely on all of the "new" apis
being present.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Now that we do not care about the kernel version we are building
against, we can strip out lots of backward compatibilty that was added
to kernel_ver.h in order to write semi-portable driver code.

To start with, remove the functions and #defines that are now in the
kernel tree, no need to have duplicate copies of them all.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This adds a proper Kconfig file for drivers/staging/greybus and fixes up
the Makefile to work correctly within the kernel build system (modules
depend on the .config options, etc.)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The Toshiba ES1 chip is no longer around, so remove the USB descriptor
documentation for it as no one cares anymore.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>