atom scratch register race fix.

* 'drm-fixes-3.18' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: add locking around atombios scratch space usage

Merge branch 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes

 Now exynos drm driver incurs infinite loop issue on multi-platform
reported by Matwey V.Korniliv like below,
    http://comments.gmane.org/gmane.comp.video.dri.devel/117622

This issue is because non kms drivers enabled are probed before
a component master tries to bring up. This patch set resolves
the infinite loop issue and also includes fixups relevant to exynos
drm internal issues.

* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: fix possible infinite loop issue
  drm/exynos: g2d: fix null pointer dereference
  drm/exynos: resolve infinite loop issue on non multi-platform
  drm/exynos: resolve infinite loop issue on multi-platform

While developing MST support I noticed I often got the wrong data
back from a transaction, in a racy fashion. I noticed the scratch
space wasn't locked against concurrent users.

Based on a patch by Alex, but I've made it a bit more obvious when
things are locked.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This patch fixes possible infinite loop issue by postponing
registration to non kms drivers after component_master_add_with_match
call, which can be incurred in all cases that non kms driver is probed
and then component bind is failed

This patch should be applied on top of below patches,
	http://comments.gmane.org/gmane.comp.video.dri.devel/117740
	http://www.spinics.net/lists/linux-samsung-soc/msg38624.htmlSigned-off-by: Inki Dae <inki.dae@samsung.com>

This patch fixes a null pointer dereference issue incurred by
calling g2d_remove when exynos_drm_platform_probe is failed.

cmdlist_pool of g2d is allocated when g2d sub driver is probed.
So if exynos_drm_platform_probe is failed, the g2d sub driver is
not probed and the cmdlist_pool is still NULL.
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This patch resovles the infinite loop issue incurred
when Exyno drm driver is enabled but all kms drivers
are disabled on Exynos board by returning -EPROBE_DEFER
only in case that there is kms device registered.
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This patch resolves temporarily infinite loop issue incurred
when Exynos drm driver is enabled and multi-platform kernel
is used by registering Exynos drm device object only in case
of Exynos SoC. So this patch will be replaced with more generic
way later.
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Black screen, screen corruption, hardware state corruption fixes.

* tag 'drm-intel-fixes-2014-11-07' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: safeguard against too high minimum brightness
  drm/i915: vlv: fix gunit HW state corruption during S4 suspend
  drm/i915: Disable caches for Global GTT.

- fix missing crtc unlock in MC setup
- set optimal CE ram config
- use gart rather than vram for DMA IB tests to avoid coherency issues with HDP
- fix a crasher with laptop mode and TDP scripts

* 'drm-fixes-3.18' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: add missing crtc unlock when setting up the MC
  drm/radeon: use gart for DMA IB tests
  drm/radeon: make sure mode init is complete in bandwidth_update
  drm/radeon: set correct CE ram size for CIK

Need to unlock the crtc after updating the blanking state.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Use gart rather than vram to avoid having to deal with
the HDP cache.

Port of adfed2b0
(drm/radeon: use gart memory for DMA ring tests)
to the IB tests.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The power management code calls into the display code for
certain things.  If certain power management sysfs attributes
are called before the driver has finished initializing all of
the hardware we can run into problems with uninitialized
modesetting state.  Add a check to make sure modesetting
init has completed to the bandwidth update callbacks to
fix this.  Can be triggered by the tlp and laptop start
up scripts depending on the timing.

bugs:
https://bugzilla.kernel.org/show_bug.cgi?id=83611
https://bugs.freedesktop.org/show_bug.cgi?id=85771Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

CE ram size is 32k/0k/0k for GFX/CS0/CS1 with CIK

Ported from amdgpu driver.
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Pull PCI fix from Bjorn Helgaas:
 "This fixes an oops when enabling SR-IOV VF devices.  The oops is a
  regression I added by configuring all devices during enumeration.

    - Don't oops on virtual buses in acpi_pci_get_bridge_handle() (Yinghai Lu)"

* tag 'pci-v3.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Don't oops on virtual buses in acpi_pci_get_bridge_handle()

Pull sound fixes from Takashi Iwai:
 "This update contains mostly only fixes for Realtek HD-audio codec
  driver in addition to a long-standing sysfs warning bug fix for
  USB-audio.

  One significant fix for Realtek codecs is the update of EAPD init
  codes.  This avoids invalid COEF setups for some codec models and may
  fix "lost sound" in some cases.

  The rest are a bit high volume but only new quirks and ALC668-specific
  COEF tables"

* tag 'sound-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Restore default value for ALC668
  ALSA: usb-audio: Fix device_del() sysfs warnings at disconnect
  ALSA: hda - fix mute led problem for three HP laptops
  ALSA: hda/realtek - Update Initial AMP for EAPD control
  ALSA: hda - change three SSID quirks to one pin quirk
  ALSA: hda - Set GPIO 4 low for a few HP machines
  ALSA: hda - Add ultra dock support for Thinkpad X240.

Pull MMC fix from Ulf Hansson:
 "Fix card detection regression in the MMC core.

  The MMC_CAP2_CD_ACTIVE_HIGH and MMC_CAP2_RO_ACTIVE_HIGH could under
  some circumstances be set incorrectly, causing the card detection to
  fail"

* tag 'mmc-v3.18-2' of git://git.linaro.org/people/ulf.hansson/mmc:
  mmc: core: fix card detection regression

Pull another filesystem fix from Al Viro:
 "A fix for embarrassing braino in o2net_send_tcp_msg().  -stable
  fodder..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix breakage in o2net_send_tcp_msg()

Never trust (your interpretation of) the VBT. Regression from

commit 6dda730e
Author: Jani Nikula <jani.nikula@intel.com>
Date:   Tue Jun 24 18:27:40 2014 +0300

    drm/i915: respect the VBT minimum backlight brightness

causing div by zero if VBT minimum brightness equals maximum brightness.

Despite my attempts I've failed in my detective work to figure out what
the root cause is. This is not the real fix, but we have to do
something.
Reported-by: Mike Auty <mike.auty@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=86551
Cc: stable@vger.kernel.org (v3.17+)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

During S4 freeze we don't call intel_suspend_complete(), which would
save the gunit HW state, but during S4 thaw/restore events we call
intel_resume_prepare() which restores it, thus ending up in a corrupted
HW state.

Fix this by calling intel_suspend_complete() from the corresponding
freeze_late event handler.

The issue was introduced in
commit 016970be
Author: Sagar Kamble <sagar.a.kamble@intel.com>
Date:   Wed Aug 13 23:07:06 2014 +0530

CC: Sagar Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Global GTT doesn't have pat_sel[2:0] so it always point to pat_sel = 000;
So the only way to avoid screen corruptions is setting PAT 0 to Uncached.

MOCS can still be used though. But if userspace is trusting PTE for
cache selection the safest thing to do is to let caches disabled.

BSpec: "For GGTT, there is NO pat_sel[2:0] from the entry,
so RTL will always use the value corresponding to pat_sel = 000"

- System agent ggtt writes (i.e. cpu gtt mmaps) already work before
this patch, i.e. the same uncached + snooping access like on gen6/7
seems to be in effect.
- So this just fixes blitter/render access. Again it looks like it's
not just uncached access, but uncached + snooping. So we can still
hold onto all our assumptions wrt cpu clflushing on LLC machines.

v2: Cleaner patch as suggested by Chris.
v3: Add Daniel's comment

Reference: https://bugs.freedesktop.org/show_bug.cgi?id=85576
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Stable@vger.kernel.org
Tested-by: James Ausmus <james.ausmus@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Restore the registers to prevent the abnormal digital power supply
rising ratio/sequence to the codec and causing the incorrect default
codec register restoration during initialization.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

uninitialized msghdr.  Broken in "ocfs2: don't open-code kernel_recvmsg()"
by me ;-/

Cc: stable@vger.kernel.org # 3.15+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull vfs fix from Al Viro:
 "Another overlayfs fix"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ovl: don't poison cursor

Pull s390 update from Martin Schwidefsky:
 "One small improvement for the cputime accounting, two bug fixes and an
  update for the default configuration files"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/ftrace: add ftrace_graph_is_dead() check
  s390: update default configuration
  s390/vdso: fix stack corruption
  s390/time: use stck clock fast for do_account_vtime

acpi_pci_get_bridge_handle() returns the ACPI handle for the bridge device
(either a host bridge or a PCI-to-PCI bridge) leading to a PCI bus.  But
SR-IOV virtual functions can be on a virtual bus with no bridge leading to
it.  Return a NULL acpi_handle in this case instead of trying to
dereference the NULL pointer to the bridge.

This fixes a NULL pointer dereference oops in pci_get_hp_params() when
adding SR-IOV VF devices on virtual buses.

[bhelgaas: changelog, add comment in code]
Fixes: 6cd33649 ("PCI: Add pci_configure_device() during enumeration")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=87591Reported-by: Chao Zhou <chao.zhou@intel.com>
Reported-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Some USB-audio devices show weird sysfs warnings at disconnecting the
devices, e.g.
 usb 1-3: USB disconnect, device number 3
 ------------[ cut here ]------------
 WARNING: CPU: 0 PID: 973 at fs/sysfs/group.c:216 device_del+0x39/0x180()
 sysfs group ffffffff8183df40 not found for kobject 'midiC1D0'
 Call Trace:
  [<ffffffff814a3e38>] ? dump_stack+0x49/0x71
  [<ffffffff8103cb72>] ? warn_slowpath_common+0x82/0xb0
  [<ffffffff8103cc55>] ? warn_slowpath_fmt+0x45/0x50
  [<ffffffff813521e9>] ? device_del+0x39/0x180
  [<ffffffff81352339>] ? device_unregister+0x9/0x20
  [<ffffffff81352384>] ? device_destroy+0x34/0x40
  [<ffffffffa00ba29f>] ? snd_unregister_device+0x7f/0xd0 [snd]
  [<ffffffffa025124e>] ? snd_rawmidi_dev_disconnect+0xce/0x100 [snd_rawmidi]
  [<ffffffffa00c0192>] ? snd_device_disconnect+0x62/0x90 [snd]
  [<ffffffffa00c025c>] ? snd_device_disconnect_all+0x3c/0x60 [snd]
  [<ffffffffa00bb574>] ? snd_card_disconnect+0x124/0x1a0 [snd]
  [<ffffffffa02e54e8>] ? usb_audio_disconnect+0x88/0x1c0 [snd_usb_audio]
  [<ffffffffa015260e>] ? usb_unbind_interface+0x5e/0x1b0 [usbcore]
  [<ffffffff813553e9>] ? __device_release_driver+0x79/0xf0
  [<ffffffff81355485>] ? device_release_driver+0x25/0x40
  [<ffffffff81354e11>] ? bus_remove_device+0xf1/0x130
  [<ffffffff813522b9>] ? device_del+0x109/0x180
  [<ffffffffa01501d5>] ? usb_disable_device+0x95/0x1f0 [usbcore]
  [<ffffffffa014634f>] ? usb_disconnect+0x8f/0x190 [usbcore]
  [<ffffffffa0149179>] ? hub_thread+0x539/0x13a0 [usbcore]
  [<ffffffff810669f5>] ? sched_clock_local+0x15/0x80
  [<ffffffff81066c98>] ? sched_clock_cpu+0xb8/0xd0
  [<ffffffff81070730>] ? bit_waitqueue+0xb0/0xb0
  [<ffffffffa0148c40>] ? usb_port_resume+0x430/0x430 [usbcore]
  [<ffffffffa0148c40>] ? usb_port_resume+0x430/0x430 [usbcore]
  [<ffffffff8105973e>] ? kthread+0xce/0xf0
  [<ffffffff81059670>] ? kthread_create_on_node+0x1c0/0x1c0
  [<ffffffff814a8b7c>] ? ret_from_fork+0x7c/0xb0
  [<ffffffff81059670>] ? kthread_create_on_node+0x1c0/0x1c0
 ---[ end trace 40b1928d1136b91e ]---

This comes from the fact that usb-audio driver may receive the
disconnect callback multiple times, per each usb interface.  When a
device has both audio and midi interfaces, it gets called twice, and
currently the driver tries to release resources at the last call.
At this point, the first parent interface has been already deleted,
thus deleting a child of the first parent hits such a warning.

For fixing this problem, we need to call snd_card_disconnect() and
cancel pending operations at the very first disconnect while the
release of the whole objects waits until the last disconnect call.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80931Reported-and-tested-by: Tomas Gayoso <tgayoso@gmail.com>
Reported-and-tested-by: Chris J Arges <chris.j.arges@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ovl_cache_put() can be called from ovl_dir_reset() if the cache needs to be
rebuilt.  We did list_del() on the cursor, which results in an Oops on the
poisoned pointer in ovl_seek_cursor().
Reported-by: Jordi Pujol Palomer <jordipujolp@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Jordi Pujol Palomer <jordipujolp@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Since commit 89168b48 ("mmc: core: restore detect line inversion
semantics"), the SD card on i.MX28 (and possibly other) devices isn't
detected and booting stops at:

[    4.120617] Waiting for root device /dev/mmcblk0p3...

This is caused by the MMC_CAP2_CD_ACTIVE_HIGH flag being set incorrectly
when the host controller doesn't use a GPIO for card detection (but
instead uses a dedicated pin). In this case mmc_gpiod_request_cd() will
return before assigning to the gpio_invert variable, leaving the
variable uninitialized. The variable then gets used to set the flag.
This patch fixes the issue by making sure gpio_invert is set to false
when a GPIO isn't used. After this patch, i.MX28 boots fine.

The MMC_CAP2_RO_ACTIVE_HIGH (write protect) flag is also set incorrectly
for the exact same reason (it uses the same uninitialized variable), so
this patch fixes that too.

Fixes: 89168b48 ("mmc: core: restore detect line inversion semantics")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Without the fix, the mute led can't work on these three machines.

After apply this fix, these three machines will fall back on the led
control quirk as below, and through testing, the mute led works very
well.
PIN_QUIRK(0x10ec0282, 0x103c, "HP", ALC269_FIXUP_HP_LINE1_MIC1_LED,
            ALC282_STANDARD_PINS,
            {0x12, 0x90a60140},
            ...

BugLink: https://bugs.launchpad.net/bugs/1389497Tested-by: TieFu Chen <tienfu.chen@canonical.com>
Cc: Kailang Yang <kailang@realtek.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Pull thermal fixes from Eduardo Valentin:
 "Specifics:
   - a few code fixes improving the Exynos code base.  They remove dead
     and unreachable code.  No functional changes here
   - in Exynos code base, fixes regarding the right usage of features
     (TRIMINFO and TRIMRELOAD)
   - documentation of RCAR thermal
   - fix in the of-thermal, regarding the proper usage of of-APIs
   - fixes on thermal-core, removal of unreachable code"

[ Eduardo is sending the thermal fixes on behalf of Rui Zhang this time.
  Rui is currently unable to send pull requests due to troubles with his
  machine and he's currently in a business trip ]

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  Thermal:Remove usless if(!result) before return tz
  thermal: exynos: fix IRQ clearing on TMU initialization
  thermal: fix multiple disbalanced device node counters
  thermal: rcar: Add binding docs for new R-Car Gen2 SoCs
  thermal: exynos: Add support for TRIM_RELOAD feature at Exynos3250
  thermal: exynos: Add support for many TRIMINFO_CTRL registers
  thermal: samsung: Exynos5260 and Exynos5420 should not use TRIM_RELOAD flag
  thermal: exynos: remove identical values from exynos*_tmu_registers structures
  thermal: exynos: remove redundant pdata checks from exynos_tmu_control()
  thermal: exynos: cache non_hw_trigger_levels in pdata
  thermal: exynos: simplify temp_to_code() and code_to_temp()
  thermal: exynos: remove redundant threshold_code checks from exynos_tmu_initialize()
  thermal: exynos: remove redundant pdata checks from exynos_tmu_initialize()
  thermal: exynos: remove dead code for HW_MODE calibration
  thermal: exynos: remove unused struct exynos_tmu_registers entries

Merge tag 'platform-drivers-x86-v3.18-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform drievr updates from Darren Hart:
 "A short list of patches applying quirks and new DMI matches.  These
  pass my basic build tests and have spent 4 days in linux-next"

* tag 'platform-drivers-x86-v3.18-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  quirk for Lenovo Yoga 3: no rfkill switch
  acer-wmi: Add acpi_backlight=video quirk for the Acer KAV80
  samsung-laptop: Add broken-acpi-video quirk for NC210/NC110
  asus-nb-wmi: Add wapf4 quirk for the X550VB
  toshiba_acpi: Add Toshiba TECRA A50-A to the alt keymap dmi list

Pull powerpc fixes from Michael Ellerman:
 "Some more powerpc fixes if you please"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux:
  powerpc: use device_online/offline() instead of cpu_up/down()
  powerpc/powernv: Properly fix LPC debugfs endianness
  powerpc: do_notify_resume can be called with bad thread_info flags argument
  powerpc/fadump: Fix endianess issues in firmware assisted dump handling
  powerpc: Fix section mismatch warning

Merge tag 'ftracetest-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull ftracetest fix from Steven Rostedt:
 "Running the ftracetests on a machine that had the debugfs file system
  mounted in two locations caused the ftracetests to fail.  This is
  because the ftracetests script does a grep of the /proc/mounts file to
  find where the debugfs file system is mounted.  If it is mounted
  twice, then the grep returns two lines instead of just one.  This
  causes the ftracetests to get confused and fail.

  Use "head -1" to only return the first mount point for debugfs"

* tag 'ftracetest-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftracetest: Take the first debugfs mount found

Pull pin-control fixes from Linus Walleij:
 "This kernel cycle has been calm for both pin control and GPIO so far
  but here are three pin control patches for you anyway, only really
  dealing with Baytrail:

   - Two fixes for the Baytrail driver affecting IRQs and output state
     in sysfs
   - Use the linux-gpio mailing list also for pinctrl patches"

* tag 'pinctrl-v3.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: baytrail: show output gpio state correctly on Intel Baytrail
  pinctrl: use linux-gpio mailing list
  pinctrl: baytrail: Clear DIRECT_IRQ bit

Pull CMA and DMA-mapping fixes from Marek Szyprowski:
 "This contains important fixes for recently introduced highmem support
  for default contiguous memory region used for dma-mapping subsystem"

* 'fixes-for-v3.18' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  mm, cma: make parameters order consistent in func declaration and definition
  mm: cma: Use %pa to print physical addresses
  mm: cma: Ensure that reservations never cross the low/high mem boundary
  mm: cma: Always consider a 0 base address reservation as dynamic
  mm: cma: Don't crash on allocation if CMA area can't be activated

Pull ceph fixes from Sage Weil:
 "There is a GFP flag fix from Mike Christie, an error code fix from
  Jan, and fixes for two unnecessary allocations (kmalloc and workqueue)
  from Ilya.  All are well tested.

  Ilya has one other fix on the way but it didn't get tested in time"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  libceph: eliminate unnecessary allocation in process_one_ticket()
  rbd: Fix error recovery in rbd_obj_read_sync()
  libceph: use memalloc flags for net IO
  rbd: use a single workqueue for all devices

result is always zero when comes here.
Signed-off-by: Yao Dongdong <yaodongdong@huawei.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Pull m68k update from Geert Uytterhoeven.

Just wiring up the bpf system call.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Wire up bpf

Pull ARM SoC fixes from Olof Johansson:
 "A surprisingly small batch of fixes for -rc3.  Suspiciously small, I'd
  say.

  Anyway, most of this are a few defconfig updates.  Some for omap to
  deal with kernel binary size (moving ipv6 to module, etc).  A larger
  one for socfpga that refreshes with some churn, but also turns on a
  few options that makes the newly-added board in my bootfarm usable for
  testing.

  OMAP3 will also now warn when booted with legacy (non-DT) boot
  protocols, hopefully encouraging those who still care about some of
  those platforms to submit DT support and report bugs where needed.
  Nothing stops working though, this is just to warn for future
  deprecation.

  Beyond this, very few actual bugfixes.  A PXA fix for DEBUG_LL boot
  hangs, a missing terminting entry in a dt_match array on RealView a
  MTD fix on OMAP with NAND"

[ Obviously missed rc3, will make rc4 instead ;) ]

* tag 'armsoc-for-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  MAINTAINERS: drop list entry for davinci
  ARM: OMAP2+: Warn about deprecated legacy booting mode
  ARM: omap2plus_defconfig: Fix errors with NAND BCH
  ARM: multi_v7_defconfig: fix support for APQ8084
  soc: versatile: Add terminating entry for realview_soc_of_match
  ARM: ixp4xx: remove compilation warnings in io.h
  MAINTAINERS: Add Soren as reviewer for Zynq
  ARM: omap2plus_defconfig: Fix bloat caused by having ipv6 built-in
  ARM: socfpga_defconfig: Update defconfig for SoCFPGA
  ARM: pxa: fix hang on startup with DEBUG_LL

Running ftracetests on a box that mounted debugfs in two locations
made the ftracetests fail. This is because the tests uses a grep
of debugfs from the /proc/mounts file to find the debugfs mount
point, and then appends "/tracing" to that string to get the tracing
directory.

If the debugfs directory is mounted twice, then that grep will return
two answers and appending "/tracing" to a string with two lines will
not work.

Use "head -1" to only take the first mount point found.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>