- 11 Nov, 2022 12 commits
-
-
Randy Dunlap authored
Fix build errors when GPIOLIB is not set/enabled: ../sound/soc/codecs/wsa883x.c: In function 'wsa883x_probe': ../sound/soc/codecs/wsa883x.c:1394:25: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_regulator_get_optional'? [-Werror=implicit-function-declaration] wsa883x->sd_n = devm_gpiod_get_optional(&pdev->dev, "powerdown", ../sound/soc/codecs/wsa883x.c:1395:49: error: 'GPIOD_FLAGS_BIT_NONEXCLUSIVE' undeclared (first use in this function) GPIOD_FLAGS_BIT_NONEXCLUSIVE); ../sound/soc/codecs/wsa883x.c:1414:9: error: implicit declaration of function 'gpiod_direction_output'; did you mean 'gpio_direction_output'? [-Werror=implicit-function-declaration] gpiod_direction_output(wsa883x->sd_n, 1); Fixes: 43b8c7dc ("ASoC: codecs: add wsa883x amplifier support") Signed-off-by:Randy Dunlap <rdunlap@infradead.org> Reported-by:
kernel test robot <lkp@intel.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Banajit Goswami <bgoswami@quicinc.com> Cc: Mark Brown <broonie@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: alsa-devel@alsa-project.org Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Reviewed-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221108001829.5100-1-rdunlap@infradead.orgSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Krzysztof Kozlowski authored
The shutdown GPIO is active low (SD_N), but this depends on actual board layout. Linux drivers should only care about logical state, where high (1) means shutdown and low (0) means do not shutdown. Invert the GPIO to match logical value. Fixes: 43b8c7dc ("ASoC: codecs: add wsa883x amplifier support") Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
-
Krzysztof Kozlowski authored
Use correct polarity in example and powerdown-gpios description. Signed-off-by:
-
Mark Brown authored
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>: Add 2 Dell SKU support.
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Add support for two RaptorLake SoundWire SKUs and one test board for MeteorLake. There will be additional RaptorLake SKUs shared when validation is complete.
-
Kuninori Morimoto authored
Audio Graph Card2 has been announcing "Audio Graph Card2 is still under Experimental stage", but it is time to remove it. This patch removes it. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87k042nm6s.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Krzysztof Kozlowski authored
The description was copied from APM driver. Signed-off-by:
-
Mark Brown authored
There are some Dell SKUs that need to set the parameters of the crossover filter (biquad). Each amplifier connects to one tweeter speaker and one woofer speaker. We should control HPF/LPF to output the proper frequency for the different speakers. If the codec driver got the BQ parameters from the device property, it will apply these parameters to the hardware.
-
Gongjun Song authored
Audio hardware configuration of SKU 0C40 product is rt711 on link2, two rt1316s on link0 and link1, rt714 on link 3. Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by:
Gongjun Song <gongjun.song@intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20221111045016.46573-5-yung-chuan.liao@linux.intel.comSigned-off-by:
-
Gongjun Song authored
SKU 0C40 product supports a SoundWire headset codec, SoundWire capture from local microphones and two SoundWire amplifiers. Reviewed-by:
-
Gongjun Song authored
Audio hardware configuration of SKU 0C10 product is rt714 on link0, two rt1316s on link1 and link2 Reviewed-by:
-
Gongjun Song authored
SKU 0C10 product supports SoundWire capture from local microphone and two SoundWire amplifiers(no headset codec). Reviewed-by:
-
- 10 Nov, 2022 22 commits
-
-
Yong Zhi authored
Add support to the following daughter card: SDW0: MX98373 Speaker SDW2: ALC5682 Headset Share same driver data used by sof_sdw driver for mtlrvp. Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Yong Zhi <yong.zhi@intel.com> Signed-off-by:
Jairaj Arava <jairaj.arava@intel.com> Signed-off-by:
-
Gongjun Song authored
Audio hardware configuration of SKU 0C40 product is rt711 on link2, two rt1316s on link0 and link1, rt714 on link 3. Reviewed-by:
-
Gongjun Song authored
SKU 0C40 product supports a SoundWire headset codec, SoundWire capture from local microphones and two SoundWire amplifiers. Reviewed-by:
-
Gongjun Song authored
Audio hardware configuration of SKU 0C10 product is rt714 on link0, two rt1316s on link1 and link2 Reviewed-by:
-
Gongjun Song authored
SKU 0C10 product supports SoundWire capture from local microphone and two SoundWire amplifiers(no headset codec). Reviewed-by:
-
Krzysztof Kozlowski authored
If we have several instances of WSA macro, each one of them should register clock with unique name, so parse clock-output-names for this. Signed-off-by:
-
Krzysztof Kozlowski authored
The purpose of clock-output-names is to customize desired clock name, not use one, same name. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20221103195341.174972-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Shuming Fan authored
The Dell SKU 0B00/0B01/0AFE/0AFF model needs the BQ params for the tweeter/woofer. Signed-off-by:
Shuming Fan <shumingf@realtek.com> Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20221109091317.17240-1-shumingf@realtek.comSigned-off-by:
-
Shuming Fan authored
The Dell SKU 0A5D/0A5E/0990/098F model needs the BQ params for the tweeter/woofer. Signed-off-by:
-
Shuming Fan authored
If the machine driver level sets the BQ params into the device property, the codec driver will get the BQ params and apply them. Signed-off-by:
-
Shuming Fan authored
If the machine driver level sets the BQ params into the device property, the codec driver will get the BQ params and apply them. Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in struct member fliter_structure. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Acked-by:
Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20221108111340.115387-1-colin.i.king@gmail.comSigned-off-by:
-
Marek Vasut authored
Sort main section properties, no functional change. Signed-off-by:
Marek Vasut <marex@denx.de> Acked-by:
-
Marek Vasut authored
The i.MX8MN currently uses "bus", "mclk0", "mclk1", "mclk2", "mclk3" clock, which adds up to 5 clock total. Use minItems 5 for this setup. Signed-off-by:
-
Marek Vasut authored
Describe existing used combinations of compatible strings on MX6UL and MX7D, which are backward compatible with MX6SX. Add the missing imx7d-sai compatible string which is used on i.MX7 . Signed-off-by:
-
Mark Brown authored
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>: Goal of the series is to drop any usage of the internal function. First, update all users to utilize component->set_jack() and then remove the relevant EXPORT_SYMBOL_GPL.
-
Mark Brown authored
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: with SOF topology2 for IPC4, widgets might have mutliple queues they can be connected. The queues to use between components are descibed in the topology file. This series adds widget queue support (specify which pin to connect) for ipc4-topology with topology2. Note: currently queue 0 of a widget is used as hardwired default.
-
Mark Brown authored
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: These are simpe-card/audio-graph fixup patches.
-
Mark Brown authored
Merge series from Nícolas F. R. A. Prado <nfraprado@collabora.com>: This series sets straight the usage of power supply properties for the rt5682 and rt5682s audio codecs. These properties were already being used by sc7180-trogdor.dtsi (and derived DTs like sc7180-trogdor-kingoftown.dtsi). We start by documenting the power supplies that are already in use and then add few others that were missing to the bindings. Then we update the drivers to also support the new supplies. Finally we update the trogdor DTs so they have the newly added but required supplies and remove a superfluous one that was causing warnings.
-
Mark Brown authored
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>: Currently we set pipeline instance id = swidget->pipeline_id, but pipeline_id is from topology and can be any number. In fact, the number of pipelines is limited. This patch use ida to allocate pipeline instance id and will be used for pipeline instance id in the IPC message.
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: MeteorLake relies on a different register for D0i3 configuration, add a platform-specific callback to abstract the differences.
-
Mark Brown authored
Merge series from Nícolas F. R. A. Prado <nfraprado@collabora.com>: Some ASoC machine drivers for MediaTek platforms were not being registered to the module device table, preventing them to be automatically loaded when built as modules. This series adds the missing registration to the drivers.
-
- 09 Nov, 2022 6 commits
-
-
Nícolas F. R. A. Prado authored
Register the compatibles for this module on the module device table so it can be automatically loaded when a matching device is found on the system. Signed-off-by:
Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by:
Chen-Yu Tsai <wenst@chromium.org> Reviewed-by:
-
Nícolas F. R. A. Prado authored
Register the compatibles for this module on the module device table so it can be automatically loaded when a matching device is found on the system. Signed-off-by:
-
Nícolas F. R. A. Prado authored
Register the compatibles for this module on the module device table so it can be automatically loaded when a matching device is found on the system. Signed-off-by:
-
Nícolas F. R. A. Prado authored
Register the compatibles for this module on the module device table so it can be automatically loaded when a matching device is found on the system. Signed-off-by:
-
Nícolas F. R. A. Prado authored
Register the compatibles for this module on the module device table so it can be automatically loaded when a matching device is found on the system. Reviewed-by:
-
Nícolas F. R. A. Prado authored
Register the compatibles for this module on the module device table so it can be automatically loaded when a matching device is found on the system. Reviewed-by:
-
