- 16 Mar, 2018 1 commit
-
-
Jonas Rabenstein authored
The length must be given as bytes and not as 4 bit tuples. Reviewed-by:
Scott Bauer <scott.bauer@intel.com> Signed-off-by:
Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 13 Mar, 2018 3 commits
-
-
Christoph Hellwig authored
The current BSG design tries to shoe-horn the transport-specific passthrough commands into the overall framework for SCSI passthrough requests. This has a couple problems: - each passthrough queue has to set the QUEUE_FLAG_SCSI_PASSTHROUGH flag despite not dealing with SCSI commands at all. Because of that these queues could also incorrectly accept SCSI commands from in-kernel users or through the legacy SCSI_IOCTL_SEND_COMMAND ioctl. - the real SCSI bsg queues also incorrectly accept bsg requests of the BSG_SUB_PROTOCOL_SCSI_TRANSPORT type - the bsg transport code is almost unredable because it tries to reuse different SCSI concepts for its own purpose. This patch instead adds a new bsg_ops structure to handle the two cases differently, and thus solves all of the above problems. Another side effect is that the bsg-lib queues also don't need to embedd a struct scsi_request anymore. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Christoph Hellwig authored
Users of the bsg-lib interface should only use the bsg_job data structure and not know about implementation details of it. Signed-off-by:
Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by:
-
Christoph Hellwig authored
The zfcp driver wants to know the timeout for a bsg job, so add a field to struct bsg_job for it in preparation of not exposing the request to the bsg-lib users. Signed-off-by:
-
- 12 Mar, 2018 2 commits
-
-
Nikolay Borisov authored
This flag was added by fe0f07d0 ("direct-io: only inc/deci inode->i_dio_count for file systems") as means to optimise the atomic modificaiton of the variable for blockdevices. However with the advent of 542ff7bf ("block: new direct I/O implementation") it became unused. So let's remove it. Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
-
Nikolay Borisov authored
This flag was added by 60392573 ("direct-io: add flag to allow aio writes beyond i_size") to support XFS. However, with the rework of XFS' DIO's path to use iomap in acdda3aa ("xfs: use iomap_dio_rw") it became redundant. So let's remove it. Reviewed-by:
-
- 09 Mar, 2018 5 commits
-
-
Ross Zwisler authored
To help folks like me that use scripts/get_maintainer.pl. Signed-off-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by:
-
Bart Van Assche authored
Avoid that building with W=1 causes the kernel-doc tool to complain about undocumented function arguments for the blk-zoned.c source file. Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
-
Maurizio Lombardi authored
when mounting an ISO filesystem sometimes (very rarely) the system hangs because of a race condition between two tasks. PID: 6766 TASK: ffff88007b2a6dd0 CPU: 0 COMMAND: "mount" #0 [ffff880078447ae0] __schedule at ffffffff8168d605 #1 [ffff880078447b48] schedule_preempt_disabled at ffffffff8168ed49 #2 [ffff880078447b58] __mutex_lock_slowpath at ffffffff8168c995 #3 [ffff880078447bb8] mutex_lock at ffffffff8168bdef #4 [ffff880078447bd0] sr_block_ioctl at ffffffffa00b6818 [sr_mod] #5 [ffff880078447c10] blkdev_ioctl at ffffffff812fea50 #6 [ffff880078447c70] ioctl_by_bdev at ffffffff8123a8b3 #7 [ffff880078447c90] isofs_fill_super at ffffffffa04fb1e1 [isofs] #8 [ffff880078447da8] mount_bdev at ffffffff81202570 #9 [ffff880078447e18] isofs_mount at ffffffffa04f9828 [isofs] #10 [ffff880078447e28] mount_fs at ffffffff81202d09 #11 [ffff880078447e70] vfs_kern_mount at ffffffff8121ea8f #12 [ffff880078447ea8] do_mount at ffffffff81220fee #13 [ffff880078447f28] sys_mount at ffffffff812218d6 #14 [ffff880078447f80] system_call_fastpath at ffffffff81698c49 RIP: 00007fd9ea914e9a RSP: 00007ffd5d9bf648 RFLAGS: 00010246 RAX: 00000000000000a5 RBX: ffffffff81698c49 RCX: 0000000000000010 RDX: 00007fd9ec2bc210 RSI: 00007fd9ec2bc290 RDI: 00007fd9ec2bcf30 RBP: 0000000000000000 R8: 0000000000000000 R9: 0000000000000010 R10: 00000000c0ed0001 R11: 0000000000000206 R12: 00007fd9ec2bc040 R13: 00007fd9eb6b2380 R14: 00007fd9ec2bc210 R15: 00007fd9ec2bcf30 ORIG_RAX: 00000000000000a5 CS: 0033 SS: 002b This task was trying to mount the cdrom. It allocated and configured a super_block struct and owned the write-lock for the super_block->s_umount rwsem. While exclusively owning the s_umount lock, it called sr_block_ioctl and waited to acquire the global sr_mutex lock. PID: 6785 TASK: ffff880078720fb0 CPU: 0 COMMAND: "systemd-udevd" #0 [ffff880078417898] __schedule at ffffffff8168d605 #1 [ffff880078417900] schedule at ffffffff8168dc59 #2 [ffff880078417910] rwsem_down_read_failed at ffffffff8168f605 #3 [ffff880078417980] call_rwsem_down_read_failed at ffffffff81328838 #4 [ffff8800784179d0] down_read at ffffffff8168cde0 #5 [ffff8800784179e8] get_super at ffffffff81201cc7 #6 [ffff880078417a10] __invalidate_device at ffffffff8123a8de #7 [ffff880078417a40] flush_disk at ffffffff8123a94b #8 [ffff880078417a88] check_disk_change at ffffffff8123ab50 #9 [ffff880078417ab0] cdrom_open at ffffffffa00a29e1 [cdrom] #10 [ffff880078417b68] sr_block_open at ffffffffa00b6f9b [sr_mod] #11 [ffff880078417b98] __blkdev_get at ffffffff8123ba86 #12 [ffff880078417bf0] blkdev_get at ffffffff8123bd65 #13 [ffff880078417c78] blkdev_open at ffffffff8123bf9b #14 [ffff880078417c90] do_dentry_open at ffffffff811fc7f7 #15 [ffff880078417cd8] vfs_open at ffffffff811fc9cf #16 [ffff880078417d00] do_last at ffffffff8120d53d #17 [ffff880078417db0] path_openat at ffffffff8120e6b2 #18 [ffff880078417e48] do_filp_open at ffffffff8121082b #19 [ffff880078417f18] do_sys_open at ffffffff811fdd33 #20 [ffff880078417f70] sys_open at ffffffff811fde4e #21 [ffff880078417f80] system_call_fastpath at ffffffff81698c49 RIP: 00007f29438b0c20 RSP: 00007ffc76624b78 RFLAGS: 00010246 RAX: 0000000000000002 RBX: ffffffff81698c49 RCX: 0000000000000000 RDX: 00007f2944a5fa70 RSI: 00000000000a0800 RDI: 00007f2944a5fa70 RBP: 00007f2944a5f540 R8: 0000000000000000 R9: 0000000000000020 R10: 00007f2943614c40 R11: 0000000000000246 R12: ffffffff811fde4e R13: ffff880078417f78 R14: 000000000000000c R15: 00007f2944a4b010 ORIG_RAX: 0000000000000002 CS: 0033 SS: 002b This task tried to open the cdrom device, the sr_block_open function acquired the global sr_mutex lock. The call to check_disk_change() then saw an event flag indicating a possible media change and tried to flush any cached data for the device. As part of the flush, it tried to acquire the super_block->s_umount lock associated with the cdrom device. This was the same super_block as created and locked by the previous task. The first task acquires the s_umount lock and then the sr_mutex_lock; the second task acquires the sr_mutex_lock and then the s_umount lock. This patch fixes the issue by moving check_disk_change() out of cdrom_open() and let the caller take care of it. Signed-off-by:Maurizio Lombardi <mlombard@redhat.com> Signed-off-by:
-
Randy Dunlap authored
Apparently the LaTex abbreviation for the German "sharp s" (ß) (Unicode U+00DF) has changed from {\sz} to {\ss}. With {\sz}, I get this error at line 1016 (line number after another patch): ! Undefined control sequence. l.1016 ...nel~2.0. Further thanks to Heiko Ei{\sz }feldt, This is fixed by changing the {\sz} to {\ss}. Signed-off-by:Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Randy Dunlap authored
Documentation updates for Documentation/cdrom/cdrom-standard.tex: cdrom_device_ops: - add check_events() and generic_packet() cdrom_device_info: - add one 'const' modifier - correct some field descriptions - add some missing fields - drop 'kdev_t dev;' field Also drop <n_discs> sentence from documentation because it is not referenced anywhere in the kernel header or C files. Signed-off-by:
-
- 08 Mar, 2018 11 commits
-
-
Bart Van Assche authored
This patch helps to avoid that new code gets introduced in block drivers that manipulates queue flags without holding the queue lock when that lock should be held. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Bart Van Assche authored
Since it is not safe to use queue_flag_(set|clear)_unlocked() without holding the queue lock after the sysfs entries for a queue have been created, complain if this happens. Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by:
-
Bart Van Assche authored
This patch has been generated as follows: for verb in set_unlocked clear_unlocked set clear; do replace-in-files queue_flag_${verb} blk_queue_flag_${verb%_unlocked} \ $(git grep -lw queue_flag_${verb} drivers block/bsg*) done Except for protecting all queue flag changes with the queue lock this patch does not change any functionality. Cc: Mike Snitzer <snitzer@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: -
Bart Van Assche authored
Use blk_queue_flag_set() instead of open-coding this function. Cc: Nicholas A. Bellinger <nab@linux-iscsi.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by:
-
Bart Van Assche authored
Use blk_queue_flag_set() instead of open-coding this function. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Acked-by:
-
Bart Van Assche authored
Use the blk_queue_flag_{set,clear}() functions instead of open-coding these. Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by:Michael Lyle <mlyle@lyle.org> Reviewed-by:
-
Bart Van Assche authored
Use the blk_queue_flag_*() functions instead of open-coding these. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by:
-
Bart Van Assche authored
Since the queue flags may be changed concurrently from multiple contexts after a queue becomes visible in sysfs, make these changes safe by protecting these with the queue lock. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by:
-
Bart Van Assche authored
Introduce functions that modify the queue flags and that protect these modifications with the request queue lock. Except for moving one wake_up_all() call from inside to outside a critical section, this patch does not change any functionality. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by:
-
Bart Van Assche authored
Except for changing the atomic queue flag manipulations that are protected by the queue lock into non-atomic manipulations, this patch does not change any functionality. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by:
-
Bart Van Assche authored
Move the definition of queue_flag_clear_unlocked() up and move the definition of queue_in_flight() down such that all queue flag manipulation function definitions become contiguous. This patch does not change any functionality. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by:
-
- 07 Mar, 2018 1 commit
-
-
Jonas Rabenstein authored
Tokens are prefixed by a variable length of bytes. If a bytestring is not stored in an tiny or short atom, we have to skip more than one byte in order to have the actual bytes not prefixed by the bytes describing the actual length of the string. Acked-by:
Jonathan Derrick <jonathan.derrick@intel.com> Signed-off-by:
-
- 06 Mar, 2018 1 commit
-
-
Ming Lei authored
On ARM64, the default page size has been 64K on some distributions, and we should allow ARM64 people to play null_blk. This patch fixes the issue by extend page bitmap size for supporting other non-4KB PAGE_SIZE. Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Cc: Shaohua Li <shli@kernel.org> Cc: Kyungchan Koh <kkc6196@fb.com>, Cc: weiping zhang <zhangweiping@didichuxing.com> Cc: Yi Zhang <yi.zhang@redhat.com> Reported-by:
Yi Zhang <yi.zhang@redhat.com> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
- 01 Mar, 2018 2 commits
-
-
Arnd Bergmann authored
A change to the generic scatterlist code caused a conflict with the rtsx card reader driver: In file included from drivers/staging/rts5208/rtsx.h:180, from drivers/staging/rts5208/rtsx.c:28: drivers/staging/rts5208/rtsx_chip.h:343: error: "SG_END" redefined [-Werror] This changes one instance of the driver to prefix SG_END and related constants. Fixes: 723fbf56 ("lib/scatterlist: Add SG_CHAIN and SG_END macros for LSB encodings") Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Reviewed-by:Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
A change to the generic scatterlist code caused a conflict with the rtsx card reader driver: In file included from drivers/misc/cardreader/rtsx_pcr.c:32: include/linux/rtsx_pci.h:40: error: "SG_END" redefined [-Werror] This changes one instance of the driver to prefix SG_END and related constants. Fixes: 723fbf56 ("lib/scatterlist: Add SG_CHAIN and SG_END macros for LSB encodings") Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by:
-
- 28 Feb, 2018 14 commits
-
-
Bart Van Assche authored
Avoid that the following race can occur: blk_cleanup_queue() blkcg_print_blkgs() spin_lock_irq(lock) (1) spin_lock_irq(blkg->q->queue_lock) (2,5) q->queue_lock = &q->__queue_lock (3) spin_unlock_irq(lock) (4) spin_unlock_irq(blkg->q->queue_lock) (6) (1) take driver lock; (2) busy loop for driver lock; (3) override driver lock with internal lock; (4) unlock driver lock; (5) can take driver lock now; (6) but unlock internal lock. This change is safe because only the SCSI core and the NVME core keep a reference on a request queue after having called blk_cleanup_queue(). Neither driver accesses any of the removed data structures between its blk_cleanup_queue() and blk_put_queue() calls. Reported-by:Joseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by:
-
Bart Van Assche authored
Initialize the request queue lock earlier such that the following race can no longer occur: blk_init_queue_node() blkcg_print_blkgs() blk_alloc_queue_node (1) q->queue_lock = &q->__queue_lock (2) blkcg_init_queue(q) (3) spin_lock_irq(blkg->q->queue_lock) (4) q->queue_lock = lock (5) spin_unlock_irq(blkg->q->queue_lock) (6) (1) allocate an uninitialized queue; (2) initialize queue_lock to its default internal lock; (3) initialize blkcg part of request queue, which will create blkg and then insert it to blkg_list; (4) traverse blkg_list and find the created blkg, and then take its queue lock, here it is the default *internal lock*; (5) *race window*, now queue_lock is overridden with *driver specified lock*; (6) now unlock *driver specified lock*, not the locked *internal lock*, unlock balance breaks. The changes in this patch are as follows: - Move the .queue_lock initialization from blk_init_queue_node() into blk_alloc_queue_node(). - Only override the .queue_lock pointer for legacy queues because it is not useful for blk-mq queues to override this pointer. - For all all block drivers that initialize .queue_lock explicitly, change the blk_alloc_queue() call in the driver into a blk_alloc_queue_node() call and remove the explicit .queue_lock initialization. Additionally, initialize the spin lock that will be used as queue lock earlier if necessary. Reported-by: -
Bart Van Assche authored
This patch does not change any functionality. Signed-off-by:
-
Bart Van Assche authored
Remove the disk, partition and bdi sysfs attributes before cleaning up the request queue associated with the disk. Signed-off-by:
-
Bart Van Assche authored
Remove the disk, partition and bdi sysfs attributes before cleaning up the request queue associated with the disk. Signed-off-by:
-
Bart Van Assche authored
Remove the disk, partition and bdi sysfs attributes before cleaning up the request queue associated with the disk. Signed-off-by:
-
Jens Axboe authored
Similarly to the support we have for testing/faking timeouts for null_blk, this adds support for triggering a requeue condition. Considering the issues around restart we've been seeing, this should be a useful addition to the testing arsenal to ensure that we are handling requeue conditions correctly. This works for queue mode 1 (legacy request_fn based path) and 2 (blk-mq path), as there's no good way to do requeue with a bio based driver. This is similar to the timeout path. For the blk-mq path, we alternate between passing back BLK_STS_RESOURCE and manually calling blk_mq_requeue_request() in the driver. The former will hit the core requeue path, while the latter exercises the IO scheduler requeue path. Reviewed-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
-
Omar Sandoval authored
sbitmap_queue_get()/sbitmap_queue_clear() are used for allocating/freeing a resource, so they should provide acquire/release barrier semantics, respectively. sbitmap_get() currently contains a full barrier, which is unnecessary, so use test_and_set_bit_lock() instead of test_and_set_bit() (these are equivalent on x86_64). sbitmap_clear_bit() does not imply any barriers, which is incorrect, as accesses of the resource (e.g., request) could potentially get reordered to after the clear_bit(). Introduce sbitmap_clear_bit_unlock() and use it for sbitmap_queue_clear() (this only adds a compiler barrier on x86_64). The other existing user of sbitmap_clear_bit() (the blk-mq software queue pending map) is serialized through a spinlock and does not need this. Reported-by:
Tejun Heo <tj@kernel.org> Acked-by:
-
Omar Sandoval authored
When we insert a request, we set the software queue pending bit while holding the software queue lock. However, we clear it outside of the lock, so it's possible that a concurrent insert could reset the bit after we clear it but before we empty the request list. Afterwards, the bit would still be set but the software queue wouldn't have any requests in it, leading us to do a spurious run in the future. This is mostly a benign/theoretical issue, but it makes the following change easier to justify. Signed-off-by:
-
Bart Van Assche authored
When debugging the ZBC code in the mq-deadline scheduler it is very important to know which zones are locked and which zones are not locked. Hence this patch that exports the zone locking information through debugfs. Cc: Omar Sandoval <osandov@fb.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Tested-by:
-
Bart Van Assche authored
Make sure that the queue show and store methods are contiguous and also that these appear in alphabetical order. Signed-off-by:
-
Jiufei Xue authored
Signed-off-by:
Jiufei Xue <jiufei.xue@linux.alibaba.com> Acked-by:
-
Anshuman Khandual authored
This replaces scatterlist->page_link LSB encodings with SG_CHAIN and SG_END definitions without any functional change. Signed-off-by:
Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by:
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Keith for 4.16-rc. * 'for-jens' of git://git.infradead.org/nvme: nvmet: fix PSDT field check in command format nvme-multipath: fix sysfs dangerously created links nvme-pci: Fix nvme queue cleanup if IRQ setup fails nvmet-loop: use blk_rq_payload_bytes for sgl selection nvme-rdma: use blk_rq_payload_bytes instead of blk_rq_bytes nvme-fabrics: don't check for non-NULL module in nvmf_register_transport
-
