- 15 Jan, 2022 25 commits
-
-
Kefeng Wang authored
Yongqiang reports a kmemleak panic when module insmod/rmmod with KASAN enabled(without KASAN_VMALLOC) on x86[1]. When the module area allocates memory, it's kmemleak_object is created successfully, but the KASAN shadow memory of module allocation is not ready, so when kmemleak scan the module's pointer, it will panic due to no shadow memory with KASAN check. module_alloc __vmalloc_node_range kmemleak_vmalloc kmemleak_scan update_checksum kasan_module_alloc kmemleak_ignore Note, there is no problem if KASAN_VMALLOC enabled, the modules area entire shadow memory is preallocated. Thus, the bug only exits on ARCH which supports dynamic allocation of module area per module load, for now, only x86/arm64/s390 are involved. Add a VM_DEFER_KMEMLEAK flags, defer vmalloc'ed object register of kmemleak in module_alloc() to fix this issue. [1] https://lore.kernel.org/all/6d41e2b9-4692-5ec4-b1cd-cbe29ae89739@huawei.com/ [wangkefeng.wang@huawei.com: fix build] Link: https://lkml.kernel.org/r/20211125080307.27225-1-wangkefeng.wang@huawei.com [akpm@linux-foundation.org: simplify ifdefs, per Andrey] Link: https://lkml.kernel.org/r/CA+fCnZcnwJHUQq34VuRxpdoY6_XbJCDJ-jopksS5Eia4PijPzw@mail.gmail.com Link: https://lkml.kernel.org/r/20211124142034.192078-1-wangkefeng.wang@huawei.com Fixes: 793213a8 ("s390/kasan: dynamic shadow mem allocation for modules") Fixes: 39d114dd ("arm64: add KASAN support") Fixes: bebf56a1 ("kasan: enable instrumentation of global variables") Signed-off-by:Kefeng Wang <wangkefeng.wang@huawei.com> Reported-by:
Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Calvin Zhang authored
Reserved regions with direct mapping may contain references to other regions. CMA region with fixed location is reserved without creating kmemleak_object for it. So add them as gray kmemleak objects. Link: https://lkml.kernel.org/r/20211123090641.3654006-1-calvinzhang.cool@gmail.comSigned-off-by:
Calvin Zhang <calvinzhang.cool@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Kuan-Ying Lee authored
With HW tag-based kasan enable, We will get the warning when we free object whose address starts with 0xFF. It is because kmemleak rbtree stores tagged object and this freeing object's tag does not match with rbtree object. In the example below, kmemleak rbtree stores the tagged object in the kmalloc(), and kfree() gets the pointer with 0xFF tag. Call sequence: ptr = kmalloc(size, GFP_KERNEL); page = virt_to_page(ptr); offset = offset_in_page(ptr); kfree(page_address(page) + offset); ptr = kmalloc(size, GFP_KERNEL); A sequence like that may cause the warning as following: 1) Freeing unknown object: In kfree(), we will get free unknown object warning in kmemleak_free(). Because object(0xFx) in kmemleak rbtree and pointer(0xFF) in kfree() have different tag. 2) Overlap existing: When we allocate that object with the same hw-tag again, we will find the overlap in the kmemleak rbtree and kmemleak thread will be killed. kmemleak: Freeing unknown object at 0xffff000003f88000 CPU: 5 PID: 177 Comm: cat Not tainted 5.16.0-rc1-dirty #21 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x1ac show_stack+0x1c/0x30 dump_stack_lvl+0x68/0x84 dump_stack+0x1c/0x38 kmemleak_free+0x6c/0x70 slab_free_freelist_hook+0x104/0x200 kmem_cache_free+0xa8/0x3d4 test_version_show+0x270/0x3a0 module_attr_show+0x28/0x40 sysfs_kf_seq_show+0xb0/0x130 kernfs_seq_show+0x30/0x40 seq_read_iter+0x1bc/0x4b0 seq_read_iter+0x1bc/0x4b0 kernfs_fop_read_iter+0x144/0x1c0 generic_file_splice_read+0xd0/0x184 do_splice_to+0x90/0xe0 splice_direct_to_actor+0xb8/0x250 do_splice_direct+0x88/0xd4 do_sendfile+0x2b0/0x344 __arm64_sys_sendfile64+0x164/0x16c invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0x44/0xec do_el0_svc+0x74/0x90 el0_svc+0x20/0x80 el0t_64_sync_handler+0x1a8/0x1b0 el0t_64_sync+0x1ac/0x1b0 ... kmemleak: Cannot insert 0xf2ff000003f88000 into the object search tree (overlaps existing) CPU: 5 PID: 178 Comm: cat Not tainted 5.16.0-rc1-dirty #21 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x1ac show_stack+0x1c/0x30 dump_stack_lvl+0x68/0x84 dump_stack+0x1c/0x38 create_object.isra.0+0x2d8/0x2fc kmemleak_alloc+0x34/0x40 kmem_cache_alloc+0x23c/0x2f0 test_version_show+0x1fc/0x3a0 module_attr_show+0x28/0x40 sysfs_kf_seq_show+0xb0/0x130 kernfs_seq_show+0x30/0x40 seq_read_iter+0x1bc/0x4b0 kernfs_fop_read_iter+0x144/0x1c0 generic_file_splice_read+0xd0/0x184 do_splice_to+0x90/0xe0 splice_direct_to_actor+0xb8/0x250 do_splice_direct+0x88/0xd4 do_sendfile+0x2b0/0x344 __arm64_sys_sendfile64+0x164/0x16c invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0x44/0xec do_el0_svc+0x74/0x90 el0_svc+0x20/0x80 el0t_64_sync_handler+0x1a8/0x1b0 el0t_64_sync+0x1ac/0x1b0 kmemleak: Kernel memory leak detector disabled kmemleak: Object 0xf2ff000003f88000 (size 128): kmemleak: comm "cat", pid 177, jiffies 4294921177 kmemleak: min_count = 1 kmemleak: count = 0 kmemleak: flags = 0x1 kmemleak: checksum = 0 kmemleak: backtrace: kmem_cache_alloc+0x23c/0x2f0 test_version_show+0x1fc/0x3a0 module_attr_show+0x28/0x40 sysfs_kf_seq_show+0xb0/0x130 kernfs_seq_show+0x30/0x40 seq_read_iter+0x1bc/0x4b0 kernfs_fop_read_iter+0x144/0x1c0 generic_file_splice_read+0xd0/0x184 do_splice_to+0x90/0xe0 splice_direct_to_actor+0xb8/0x250 do_splice_direct+0x88/0xd4 do_sendfile+0x2b0/0x344 __arm64_sys_sendfile64+0x164/0x16c invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0x44/0xec do_el0_svc+0x74/0x90 kmemleak: Automatic memory scanning thread ended [akpm@linux-foundation.org: whitespace tweak] Link: https://lkml.kernel.org/r/20211118054426.4123-1-Kuan-Ying.Lee@mediatek.comSigned-off-by:Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com> Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Doug Berger <opendmb@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
Muchun Song authored
There is no external users of slab_start/next/stop(), so make them static. And the memory.kmem.slabinfo is deprecated, which outputs nothing now, so move memcg_slab_show() into mm/memcontrol.c and rename it to mem_cgroup_slab_show to be consistent with other function names. Link: https://lkml.kernel.org/r/20211109133359.32881-1-songmuchun@bytedance.comSigned-off-by:
Muchun Song <songmuchun@bytedance.com> Reviewed-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Marco Elver authored
Calling kmem_cache_destroy() while the cache still has objects allocated is a kernel bug, and will usually result in the entire cache being leaked. While the message in kmem_cache_destroy() resembles a warning, it is currently not implemented using a real WARN(). This is problematic for infrastructure testing the kernel, all of which rely on the specific format of WARN()s to pick up on bugs. Some 13 years ago this used to be a simple WARN_ON() in slub, but commit d629d819 ("slub: improve kmem_cache_destroy() error message") changed it into an open-coded warning to avoid confusion with a bug in slub itself. Instead, turn the open-coded warning into a real WARN() with the message preserved, so that test systems can actually identify these issues, and we get all the other benefits of using a normal WARN(). The warning message is extended with "when called from <caller-ip>" to make it even clearer where the fault lies. For most configurations this is only a cosmetic change, however, note that WARN() here will now also respect panic_on_warn. Link: https://lkml.kernel.org/r/20211102170733.648216-1-elver@google.comSigned-off-by:
Marco Elver <elver@google.com> Reviewed-by:
David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by:
-
Amit Daniel Kachhap authored
__user annotations are used by the checker (e.g sparse) to mark user pointers. However here __user is applied to a struct directly, without a pointer being directly involved. Although the presence of __user does not cause sparse to emit a warning, __user should be removed for consistency with other uses of offsetof(). Note: No functional changes intended. Link: https://lkml.kernel.org/r/20211122101256.7875-1-amit.kachhap@arm.comSigned-off-by:
Amit Daniel Kachhap <amit.kachhap@arm.com> Cc: Vincenzo Frascino <Vincenzo.Frascino@arm.com> Cc: Kevin Brodsky <Kevin.Brodsky@arm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Colin Ian King authored
The variable 'free_space' is being initialized with a value that is not read, it is being re-assigned later in the two paths of an if statement. The early initialization is redundant and can be removed. Link: https://lkml.kernel.org/r/20220112230411.1090761-1-colin.i.king@gmail.comSigned-off-by:
Colin Ian King <colin.i.king@gmail.com> Acked-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
-
Greg Kroah-Hartman authored
There are currently two ways to create a set of sysfs files for a kobj_type, through the default_attrs field, and the default_groups field. Move the ocfs2 cluster sysfs code to use default_groups field which has been the preferred way since aa30f47c ("kobject: Add support for default attribute groups to kobj_type") so that we can soon get rid of the obsolete default_attrs field. Link: https://lkml.kernel.org/r/20220106102028.3345634-1-gregkh@linuxfoundation.orgSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
-
Colin Ian King authored
The variable 'root_bh' is being initialized with a value that is not read, it is being re-assigned later on closer to its use. The early initialization is redundant and can be removed. Link: https://lkml.kernel.org/r/20211228013719.620923-1-colin.i.king@gmail.comSigned-off-by:
-
Greg Kroah-Hartman authored
There are currently two ways to create a set of sysfs files for a kobj_type, through the default_attrs field, and the default_groups field. Move the ocfs2 code to use default_groups field which has been the preferred way since aa30f47c ("kobject: Add support for default attribute groups to kobj_type") so that we can soon get rid of the obsolete default_attrs field. Link: https://lkml.kernel.org/r/20211228144517.391660-1-gregkh@linuxfoundation.orgSigned-off-by:
-
Joseph Qi authored
ocfs2_grab_pages_for_write() may return -EAGAIN if write context type is mmap and it could not lock the target page. In this case, we exit with no error and no target page. And then trigger the caller page_mkwrite() to retry. Since there are other caller types, e.g. buffer and direct io, make the return value handling more clear. Link: https://lkml.kernel.org/r/20211206065051.103353-1-joseph.qi@linux.alibaba.comSigned-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
-
Zhang Mingyu authored
This issue was detected with the help of Coccinelle. Link: https://lkml.kernel.org/r/20211105014424.75372-1-zhang.mingyu@zte.com.cnSigned-off-by:
Zhang Mingyu <zhang.mingyu@zte.com.cn> Reported-by:
Zeal Robot <zealci@zte.com.cn> Acked-by:
-
Zheng Liang authored
Commit c1f6925e ("mm: put readahead pages in cache earlier") causes the read performance of squashfs to deteriorate.Through testing, we find that the performance will be back by closing the readahead of squashfs. So we want to learn the way of ubifs, provides backing_dev_info and disable read-ahead We tested the following data by fio. squashfs image blocksize=128K test command: fio --name basic --bs=? --filename="/mnt/test_file" --rw=? --iodepth=1 --ioengine=psync --runtime=200 --time_based turn on squashfs readahead in 5.10 kernel bs(k) read/randread MB/s 4 randread 271 128 randread 231 1024 randread 246 4 read 310 128 read 245 1024 read 247 turn off squashfs readahead in 5.10 kernel bs(k) read/randread MB/s 4 randread 293 128 randread 330 1024 randread 363 4 read 338 128 read 360 1024 read 365 turn on squashfs readahead and revert the commit c1f6925e("mm: put readahead pages in cache earlier") in 5.10 kernel bs(k) read/randread MB/s 4 randread 289 128 randread 306 1024 randread 335 4 read 337 128 read 336 1024 read 338 Link: https://lkml.kernel.org/r/20211116113141.1391026-1-zhengliang6@huawei.comSigned-off-by:
Zheng Liang <zhengliang6@huawei.com> Reviewed-by:
Phillip Lougher <phillip@squashfs.org.uk> Cc: Zhang Yi <yi.zhang@huawei.com> Cc: Hou Tao <houtao1@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Signed-off-by:
-
Yang Li authored
The comments for the file should not be in kernel-doc format: /** * attrib.c - NTFS attribute operations. Part of the Linux-NTFS as it causes it to be incorrectly identified for function ntfs_map_runlist_nolock(), causing some warnings found by running scripts/kernel-doc.: fs/ntfs/attrib.c:25: warning: Incorrect use of kernel-doc format: * ntfs_map_runlist_nolock - map (a part of) a runlist of an ntfs inode fs/ntfs/attrib.c:71: warning: Function parameter or member 'ni' not described in 'ntfs_map_runlist_nolock' fs/ntfs/attrib.c:71: warning: Function parameter or member 'vcn' not described in 'ntfs_map_runlist_nolock' fs/ntfs/attrib.c:71: warning: Function parameter or member 'ctx' not described in 'ntfs_map_runlist_nolock' fs/ntfs/attrib.c:71: warning: expecting prototype for attrib.c - NTFS attribute operations. Part of the Linux(). Prototype was for ntfs_map_runlist_nolock() instead Link: https://lkml.kernel.org/r/20220106015145.67067-1-yang.lee@linux.alibaba.comSigned-off-by:
Yang Li <yang.lee@linux.alibaba.com> Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Anton Altaparmakov <anton@tuxera.com> Signed-off-by:
-
Drew Fustini authored
Add typo "oveflow" for "overflow". This typo was found and fixed in tools/testing/selftests/bpf/prog_tests/btf_dump.c Link: https://lore.kernel.org/all/20211122070528.837806-1-dfustini@baylibre.com/ Link: https://lkml.kernel.org/r/20211122072302.839102-1-dfustini@baylibre.comSigned-off-by:
Drew Fustini <dfustini@baylibre.com> Suggested-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Cc: Colin Ian King <colin.king@intel.com> Cc: Drew Fustini <dfustini@baylibre.com> Cc: zuoqilin <zuoqilin@yulong.com> Cc: Tom Saeger <tom.saeger@oracle.com> Cc: Sven Eckelmann <sven@narfation.org> Signed-off-by:
-
Greg Kroah-Hartman authored
There are currently two ways to create a set of sysfs files for a kobj_type, through the default_attrs field, and the default_groups field. Move the ia64 topology sysfs code to use default_groups field which has been the preferred way since aa30f47c ("kobject: Add support for default attribute groups to kobj_type") so that we can soon get rid of the obsolete default_attrs field. Link: https://lkml.kernel.org/r/20220104154800.1287947-1-gregkh@linuxfoundation.orgSigned-off-by:
-
Jason Wang authored
The double `the' in a comment is repeated, thus it should be removed. Link: https://lkml.kernel.org/r/20211113030316.22650-1-wangborong@cdjrlc.comSigned-off-by:
Jason Wang <wangborong@cdjrlc.com> Signed-off-by:
-
Yang Guang authored
Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid opencoding it. Link: https://lkml.kernel.org/r/20211104001908.695110-1-yang.guang5@zte.com.cnReported-by:
Yang Guang <yang.guang5@zte.com.cn> Cc: David Yang <davidcomponentone@gmail.com> Signed-off-by:
-
Yang Guang authored
Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid opencoding it. Link: https://lkml.kernel.org/r/20211104062642.1506539-1-yang.guang5@zte.com.cnSigned-off-by:
-
Cai Huoqing authored
Replace kthread_create_on_cpu/wake_up_process() with kthread_run_on_cpu() to simplify the code. Link: https://lkml.kernel.org/r/20211022025711.3673-7-caihuoqing@baidu.comSigned-off-by:
Cai Huoqing <caihuoqing@baidu.com> Cc: Bernard Metzler <bmt@zurich.ibm.com> Cc: Daniel Bristot de Oliveira <bristot@kernel.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Doug Ledford <dledford@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: "Paul E . McKenney" <paulmck@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Cai Huoqing authored
Replace kthread_create_on_cpu/wake_up_process() with kthread_run_on_cpu() to simplify the code. Link: https://lkml.kernel.org/r/20211022025711.3673-6-caihuoqing@baidu.comSigned-off-by:
-
Cai Huoqing authored
Replace kthread_create_on_node/kthread_bind/wake_up_process() with kthread_run_on_cpu() to simplify the code. Link: https://lkml.kernel.org/r/20211022025711.3673-5-caihuoqing@baidu.comSigned-off-by:
-
Cai Huoqing authored
Replace kthread_create/kthread_bind/wake_up_process() with kthread_run_on_cpu() to simplify the code. Link: https://lkml.kernel.org/r/20211022025711.3673-4-caihuoqing@baidu.comSigned-off-by:
-
Cai Huoqing authored
Replace kthread_create/kthread_bind/wake_up_process() with kthread_run_on_cpu() to simplify the code. Link: https://lkml.kernel.org/r/20211022025711.3673-3-caihuoqing@baidu.comSigned-off-by:
-
Cai Huoqing authored
Add a new helper function kthread_run_on_cpu(), which includes kthread_create_on_cpu/wake_up_process(). In some cases, use kthread_run_on_cpu() directly instead of kthread_create_on_node/kthread_bind/wake_up_process() or kthread_create_on_cpu/wake_up_process() or kthreadd_create/kthread_bind/wake_up_process() to simplify the code. [akpm@linux-foundation.org: export kthread_create_on_cpu to modules] Link: https://lkml.kernel.org/r/20211022025711.3673-2-caihuoqing@baidu.comSigned-off-by:
-
- 09 Jan, 2022 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fix from Dmitry Torokhov: "A small fixup to the Zinitix touchscreen driver to avoid enabling the IRQ line before we successfully requested it" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: zinitix - make sure the IRQ is allocated before it gets enabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fix from Olof Johansson: "One more fix for 5.16 I had missed one patch when I sent up what I thought was the last batch of fixes for this release. This one fixes issues on the Raspberry Pi platforms due to gpio init changes this release, so hopefully we can get it merged before final release is cut" * tag 'soc-fixes-5.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: gpio-ranges property is now required
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.16-2022-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Revert "libtraceevent: Increase libtraceevent logging when verbose", breaks the build with libtraceevent-1.3.0, i.e. when building with 'LIBTRACEEVENT_DYNAMIC=1'. - Avoid early exit in 'perf trace' due to running SIGCHLD handler before it makes sense to. It can happen when using a BPF source code event that have to be first built into an object file. * tag 'perf-tools-fixes-for-v5.16-2022-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: Revert "libtraceevent: Increase libtraceevent logging when verbose" perf trace: Avoid early exit due to running SIGCHLD handler before it makes sense to
-
Len Brown authored
This reverts commit f7d6779d. This bisected regression has impacted suspend-resume stability since 5.15-rc1. It regressed -stable via 5.14.10. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215315 Fixes: f7d6779d ("drm/amdgpu: stop scheduler when calling hw_fini (v2)") Cc: Guchun Chen <guchun.chen@amd.com> Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: <stable@vger.kernel.org> # 5.14+ Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Nikita Travkin authored
Since irq request is the last thing in the driver probe, it happens later than the input device registration. This means that there is a small time window where if the open method is called the driver will attempt to enable not yet available irq. Fix that by moving the irq request before the input device registration. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Fixes: 26822652 ("Input: add zinitix touchscreen driver") Signed-off-by:
Nikita Travkin <nikita@trvn.ru> Link: https://lore.kernel.org/r/20220106072840.36851-2-nikita@trvn.ruSigned-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 08 Jan, 2022 5 commits
-
-
Phil Elwell authored
Since [1], added in 5.7, the absence of a gpio-ranges property has prevented GPIOs from being restored to inputs when released. Add those properties for BCM283x and BCM2711 devices. [1] commit 2ab73c6d ("gpio: Support GPIO controllers without pin-ranges") Link: https://lore.kernel.org/r/20220104170247.956760-1-linus.walleij@linaro.org Fixes: 2ab73c6d ("gpio: Support GPIO controllers without pin-ranges") Fixes: 266423e6 ("pinctrl: bcm2835: Change init order for gpio hogs") Reported-by:
Stefan Wahren <stefan.wahren@i2se.com> Reported-by:
Florian Fainelli <f.fainelli@gmail.com> Reported-by:
Jan Kiszka <jan.kiszka@web.de> Signed-off-by:
Phil Elwell <phil@raspberrypi.com> Acked-by:
Olof Johansson <olof@lixom.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A few more fixes have come in, nothing overly severe but would be good to get in by final release: - More specific compatible fields on the qspi controller for socfpga, to enable quirks in the driver - A runtime PM fix for Renesas to fix mismatched reference counts on errors" * tag 'soc-fixes-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: socfpga: change qspi to "intel,socfpga-qspi" dt-bindings: spi: cadence-quadspi: document "intel,socfpga-qspi" reset: renesas: Fix Runtime PM usage -
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Fix the regression with AMD GPU suspend by reverting the handling of bus regulators in the I2C core. Also, there is a fix for the MPC driver to prevent an out-of-bound-access" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: Revert "i2c: core: support bus regulator controlling in adapter" i2c: mpc: Avoid out of bounds memory access
-
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supplyLinus Torvalds authored
Pull power supply fixes from Sebastian Reichel: "Three fixes for the 5.16 cycle: - Avoid going beyond last capacity in the power-supply core - Replace 1E6L with NSEC_PER_MSEC to avoid floating point calculation in LLVM resulting in a build failure - Fix ADC measurements in bq25890 charger driver" * tag 'for-v5.16-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: reset: ltc2952: Fix use of floating point literals power: bq25890: Enable continuous conversion for ADC at charging power: supply: core: Break capacity loop -
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fix from Darrick Wong: - Make the old ALLOCSP ioctl behave in a consistent manner with newer syscalls like fallocate. * tag 'xfs-5.16-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: map unwritten blocks in XFS_IOC_{ALLOC,FREE}SP just like fallocate
-
- 07 Jan, 2022 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup fixes from Tejun Heo: "This contains the cgroup.procs permission check fixes so that they use the credentials at the time of open rather than write, which also fixes the cgroup namespace lifetime bug" * 'for-5.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: selftests: cgroup: Test open-time cgroup namespace usage for migration checks selftests: cgroup: Test open-time credential usage for migration checks selftests: cgroup: Make cg_create() use 0755 for permission instead of 0644 cgroup: Use open-time cgroup namespace for process migration perm checks cgroup: Allocate cgroup_file_ctx for kernfs_open_file->priv cgroup: Use open-time credentials for process migraton perm checks
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fix from Jens Axboe: "Just the md bitmap regression this time" * tag 'block-5.16-2022-01-07' of git://git.kernel.dk/linux-block: md/raid1: fix missing bitmap update w/o WriteMostly devices
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds authored
Pull EDAC fix from Tony Luck: "Fix 10nm EDAC driver to release and unmap resources on systems without HBM" * tag 'edac_urgent_for_v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/i10nm: Release mdev/mbase when failing to detect HBM
-
Wolfram Sang authored
This largely reverts commit 5a7b95fb. It breaks suspend with AMD GPUs, and we couldn't incrementally fix it. So, let's remove the code and go back to the drawing board. We keep the header extension to not break drivers already populating the regulator. We expect to re-add the code handling it soon. Fixes: 5a7b95fb ("i2c: core: support bus regulator controlling in adapter") Reported-by:
"Tareque Md.Hanif" <tarequemd.hanif@yahoo.com> Link: https://lore.kernel.org/r/1295184560.182511.1639075777725@mail.yahoo.comReported-by:
Konstantin Kharlamov <hi-angel@yandex.ru> Link: https://lore.kernel.org/r/7143a7147978f4104171072d9f5225d2ce355ec1.camel@yandex.ru BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1850Tested-by:
Wolfram Sang <wsa@kernel.org> Cc: <stable@vger.kernel.org> # 5.14+
-
