- 14 Nov, 2012 40 commits
-
-
Bing Zhao authored
ksdioirqd has higher priority than kworker. Process RX packets in SDIO IRQ thread (ksdioirqd/mmcX) directly instead of deferring the work to kworker to avoid the extra latency. This improves TCP throughput 15~20% on an ARM platform with SDIO 2.0 controller. Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Arend van Spriel authored
Firmware events are passed to wl_cfg80211 module associated with the primary net device. With virtual interface support events can be received for different interfaces, ie. struct brcmf_if instances. Pass it in the event to determine appropriate net device associated with the event. Reviewed-by:
Hante Meuleman <meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
Franky Lin <frankyl@broadcom.com> Signed-off-by:
-
Hante Meuleman authored
Add USB log level and update and add log messages in usb module. Reviewed-by:
-
Hante Meuleman authored
brcmf_netdev_stop shall first check bus_if status before bringing down cfg80211. brcmf_detach shall first check if driver is allocated. Reviewed-by:
-
Hante Meuleman authored
brcmf_netdev_start_xmit and brcmf_fil_cmd_data are checking bus state for down. These functions should check for data state. Reviewed-by:
-
Hante Meuleman authored
when brcmf_cfg80211_del_key was called with out of range key index then firmware would return error. Checking was added to brcmf_cfg80211_del_key to immediately return error. Reviewed-by:
-
Arend van Spriel authored
This fixes a build regression for x86_64 target that showed up in 3.7-rc1 due to: commit 1a873342 Author: Hante Meuleman <meuleman@broadcom.com> Date: Thu Sep 27 14:17:54 2012 +0200 brcmfmac: add hostap supoort. Reported-by:
Yuanhan Liu <yuanhan.liu@intel.com> Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reported-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
-
Franky Lin authored
Use int instead of bool as the return type of function brcmf_sdio_hdparser to explicitly describe error returns. Signed-off-by:
-
Franky Lin authored
brcmf_sdbrcm_wait_for_event is now a one line function and only used by brcmf_sdbrcm_bus_txctl. Intergrate the function call wait_event_interruptible_timeout into brcmf_sdbrcm_bus_txctl. Signed-off-by:
-
Franky Lin authored
Semaphore sdsem is used to protect consecutive memory access through SDIO bus. Same functionality is provided by sdio_claim_host/ sdio_release_host interface as well. Replace sdsem with sdio_claim_host. Signed-off-by:
-
Franky Lin authored
Semaphore sdsem which protects consecutive SDIO bus access is used to lock down unnecessary wide range. Decrease the locking range provides the capability of parallel processing. Signed-off-by:
-
Franky Lin authored
Rxbuf in SDIO interface is used in normal frame and control frame read. Use dynamically allocated buffer in control frame read path for post processing to avoid conflicts. Signed-off-by:
-
Arend van Spriel authored
The function brcmf_fil_bsscfg_data_get() calls brcmf_create_iovar() with data pointer set to NULL, which caused a NULL pointer access. As it should be possible to provide data in message towards the firmware, it should just pass the data buffer instead. Reviewed-by:
-
Hante Meuleman authored
the refactored firmware interface layer made this function obsolete. Reviewed-by:
-
Arend van Spriel authored
The function brcmf_cfg80211_start_ap() had some variables declared that were not used or not needed any longer. This patch removes those variables. Reviewed-by:
-
Arend van Spriel authored
The function brcmf_set_management_ie() operates on virtual interface data and brcmf_cfg80211_vif structure provides all information needed for interfacing with firmware. As this function will also be needed for interface without an associated net device it makes sense to provide the vif instead of deriving it from the net device. Reviewed-by:
-
Hante Meuleman authored
sizeof calculation in setting pkt_filter was incorrect. This patch fixes that and removes related defines which have become obsolete. Reviewed-by:
-
Hante Meuleman authored
brcmf_netdev_wait_pend8021x was polling to see if 8021x data was already sent. Code was replaced using wait_event_timeout. Reviewed-by:
-
Hante Meuleman authored
On exception during brcmf_bus_start the netdev should be freed, if already allocated. Reviewed-by:
-
Hante Meuleman authored
Change setting up multicast, mac address and offloading to use the refactored firmware interface layer. Remove obsolete brcmf_proto_dcmd function. Reviewed-by:
-
Hante Meuleman authored
e-scan has become the default scanning method. This patch removes the i-scan related code and cleans up e-scan related code to be always enabled. Reviewed-by:
-
Arend van Spriel authored
The vendor ie buffer passed to brcmf_set_management_ie() is not modified and the caller always provided a constant buffer, which needed a cast. Better making the buffer parameter of the function constant so the casts can be removed. Reviewed-by:
-
Arend van Spriel authored
The function brcmf_inform_bss() validates the version received from the device, before processing the individual bss entries. This error condition is only applicable when the list contains entries. A specific scan, ie. for a specific ssid, can result in a scan completion without finding any bss entries. No need to flag it as an error in the log when this happens. Reviewed-by:
-
Arend van Spriel authored
Code flow was: err = foo(); if (!err) return err; else goto exit; return 0; Changed it to just to exit label if err is non-zero. Reviewed-by:
-
Arend van Spriel authored
The data stored in ap_info structure is no longer used so remove it from the driver. Signed-off-by:
-
Pontus Fuchs authored
A missing else caused a potential NULL dereference. Reported-by:
Yuanhan Liu <yuanhan.liu@linux.intel.com> Signed-off-by:
Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by:
-
Pontus Fuchs authored
__be32 variables where used a little careless leading to sparse warnings. Treat them a little more gentle. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Julia Lawall authored
Just use WARN_ON rather than an if containing only WARN_ON(1). A simplified version of the semantic patch that makes this transformation is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; @@ - if (e) WARN_ON(1); + WARN_ON(e); // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Jaume Delclòs authored
This patch adds detection for the Sweex LW323 USB wireless network card in the rt2x00 driver (just one line in rt2800usb.c). It applies to linux-3.7-rc3. Signed-off-by:
Jaume Delclòs <jaume@delclos.com> Signed-off-by:
-
Avinash Patil authored
This patch adds support for multiple TX queues inside mwifiex driver. Four different queues according to WMM access categories are defined for each virtual interface. When a packet is received from netdev for transmission, tx pending count for particular queue is incremented and if tx pending count has reached upper water-mark, this queue is stopped instead of stopping all queues. Similarly when a packet is successfully transmitted from device, tx pending count is decremented per queue and if pending count falls below lower water-mark, queue operations are again resumed. This ensures that not all tranmission is blocked if traffic with particular TOS value suddenly increases. Also wake all queues after association/IBSS_join/uAP_BSS_start to enable traffic on all queues. Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
-
Amitkumar Karwar authored
When command timeout happens due to a bug in firmware/hardware, the timeout handler just prints some debug information. User is unable to reload the driver in this case. Inspired by 9a821f5d "libertas: add sd8686 reset_card support", this patch adds card reset support for SDIO interface when command timeout happens. If the SDIO host contoller supports MMC_POWER_OFF|UP|ON operations, the chip will be reset and the firmware will be re-downloaded. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
-
Wei Yongjun authored
Remove duplicated include. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Wei Yongjun authored
Use the module_usb_driver() macro to make the code simpler by eliminating module_init and module_exit calls. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by:
-
Harro Haan authored
This chip is for example used in the GuruPlug. This patch avoids the following error: libertas_sdio: failed to load firmware libertas_sdio: probe of mmc0:0001:1 failed with error -5 The fix is based on code in: drivers/net/wireless/libertas_uap/uap_sdio_mmc.c This file can for example be found on the following links: http://www.xilka.com/sheeva/2.6/2.6.36/2.6.36.2/source/0002-Driver-for-Marvell-Libertas-8688-SDIO-micro-AP-suppo-2.6.35.patch http://www.downloadsnewit.co.uk/kernel-v3.0.7/ I followed the following wiki to setup a working WiFi client mode connection on the GuruPlug: http://wiki.debian.org/libertasSigned-off-by:
Harro Haan <hrhaan@gmail.com> Acked-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Luis R. Rodriguez authored
This is pretty pointless. Lets kill this to stop people from thinking that its actually used. Maybe we should go on a crusade and kill this completely from the kernel. Cc: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Acked-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by:
-
Zefir Kurtisi authored
Free instance of pattern detector if requested DFS domain is not supported. Signed-off-by:
Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by:
-
Zefir Kurtisi authored
set_domain() is already defined in /arch/arm/asm/domain.h Signed-off-by:
-
Joe Perches authored
dev_<level> calls take less code than dev_printk(KERN_<LEVEL> and reducing object size is good. Coalesce formats for easier grep. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Larry Finger authored
This patch completes the addition of the new driver for the Realtek RTL8723AE devices by adding the make file and by modifying Kconfig and Makefile of rtlwifi. Some variable names were shortened to ease the problem of limiting all lines to 80 characters, thus changes were made to wifi.h and rtl8192{ce,cu,sw}/hw.c. Signed-off-by:Larry Finger <Larry.Finger@lwfinger.net> Cc: <chaoming_li@realsil.com.cn> Signed-off-by:
-
Larry Finger authored
This patch modifies the files of rtlwifi for the addition of a new driver to handle the Realtek RTL8723AE wireless device, and introduces a new routine to maintaim statistics that will be used later for roaming. Signed-off-by:
-
