- 26 Apr, 2022 2 commits
-
-
Philip Yang authored
Change SVM range mapping flags or access attributes don't trigger migration, if range is already mapped on GPUs we should update GPU mapping and pass flush_tlb flag true to amdgpu vm. Change SVM range preferred_loc or migration granularity don't need update GPU mapping, skip the validate_and_map. Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Philip Yang authored
To avoid unnecessary unmap SVM range from GPUs if range is not mapped on GPUs when migrating the range. This flag will also be used to flush TLB when updating the existing mapping on GPUs. It is protected by prange->migrate_mutex and mmap read lock in MMU notifier callback. Signed-off-by:
-
- 25 Apr, 2022 15 commits
-
-
Aric Cyr authored
This version brings along following fixes: - Keep tracking of DSC packed PPS for future use - Maintain current link settings in link loss interrupt - Remove DDC write and read size check - Read PSR-SU cap DPCD for specific panel - Don't pass HostVM by default on DCN3.1 - Reset cached PSR parameters after hibernate - Add audio readback registers - Update dcn315 clk table read Acked-by:
Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Ilya Bakoulin authored
[Why] Store current packed PPS data in dc_stream_state for future use. Reviewed-by:
Ilya Bakoulin <Ilya.Bakoulin@amd.com> Tested-by:
-
Dillon Varone authored
Integer no longer needed. Reviewed-by:
Martin Leung <Martin.Leung@amd.com> Acked-by:
Dillon Varone <dillon.varone@amd.com> Tested-by:
-
Gary Li authored
[Why] DP compliance test case 400.3.2.3 is failed because in link loss interrupt the current link settings is not used in the DP link training. [How] In link loss interrupt, use the current link settings in the following DP link training. Reviewed-by:
Wenjing Liu <Wenjing.Liu@amd.com> Acked-by:
Gary Li <garyli12@amd.com> Tested-by:
-
Leo Ma authored
[Why] Customer found I2C over AUX using ADL_Display_DDCBlockAccess_Get will fail when sending more than 256 bytes of data; [How] Remove the write and read size checking to allow sending data more than 256 bytes; Reviewed-by:
Leo Ma <hanghong.ma@amd.com> Tested-by:
-
David Zhang authored
[why & how] For some specific eDP panel, we'd check the PSR-SU cap during boot by reading the vendor specific DPCD, otherwise it will cause to false report the eDP panel which supports PSR-SU as an non-PSR-SU panel. - add the vendor specific DPCD address in ddc_service_types header - if specific eDP panel detected, check vendor specific DPCD for PSR-SU cap Reviewed-by:
Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com> Acked-by:
David Zhang <dingchen.zhang@amd.com> Tested-by:
-
Michael Strauss authored
[WHY] Roll back previous change to stop passing this value by default, instead add a debug flag to override to previous behaviour (or force HostVM calcs) Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
Michael Strauss <michael.strauss@amd.com> Tested-by:
-
Evgenii Krasnikov authored
[WHY] After hibernate system might be using old invalid psr_power_opt and psr_allow_active that never get reset [HOW] Reset cached Panel Self Refresh parameters when PSR is first configured for eDP in dc_link_setup_psr. Reviewed-by:
Harry Vanzylldejong <harry.vanzylldejong@amd.com> Acked-by:
Evgenii Krasnikov <Evgenii.Krasnikov@amd.com> Tested-by:
-
Ilya Bakoulin authored
[Why] Can be useful for verifying the correctness of audio output. Reviewed-by:
-
Dmytro Laktyushkin authored
Clean up the sequence by making sure clk_mgr always builds a reasonable clock table regardless of what we read from smu by moving all defaults from resource soc struct to clk_mgr. Now the only thing resource soc update does is read the clock table and apply any DC specific policy decisions to how clocks are populated in dml soc. Reviewed-by:
Qingqing Zhuo <Qingqing.Zhuo@amd.com> Acked-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Tested-by:
-
Aric Cyr authored
This version brings along following improvements: - Fix HDCP QUERY Error for eDP and Tiled - Insert smu busy status before sending another request Acked-by:
-
Mustapha Ghaddar authored
[WHY] For dio_output_encoder ID we are relying on SW concept which is invisible to HW [HOW] Needed to create separate cases for when DPIA and non DPIA for dio link encoder ID Reviewed-by:
James Zhang <james.zhang@amd.com> Acked-by:
Mustapha Ghaddar <mghaddar@amd.com> Tested-by:
-
Oliver Logush authored
[why] Need to check if result register is busy before sending another request [how] Call method to check if result register is busy Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
Oliver Logush <oliver.logush@amd.com> Tested-by:
-
Felix Kuehling authored
MEC firmware sometimes sends signal interrupts without a valid context ID on end of pipe events that don't intend to signal any HSA signals. This triggers the slow path in kfd_signal_event_interrupt that scans the entire event page for signaled events. Detect these signals in the top half interrupt handler to stop processing them as early as possible. Because we now always treat event ID 0 as invalid, reserve that ID during process initialization. v2: Update firmware version checks to support more GPUs Signed-off-by:
-
Haowen Bai authored
After alloc fail, we do not need to kfree. Signed-off-by:
Haowen Bai <baihaowen@meizu.com> Signed-off-by:
-
- 22 Apr, 2022 6 commits
-
-
David Yu authored
Load ta fw during psp_init_sriov_microcode to enable XGMI. It is required to be loaded by both guest and host starting from Arcturus. Cap fw needs to be loaded first. Signed-off-by:
David Yu <David.Yu@amd.com> Reviewed-by:
Shaoyun.liu <Shaoyun.liu@amd.com> Signed-off-by:
-
Evan Quan authored
The adev->pm.mutx is already held at the beginning of amdgpu_dpm_compute_clocks/amdgpu_dpm_enable_uvd/amdgpu_dpm_enable_vce. But on their calling path, amdgpu_display_bandwidth_update will be called and thus its sub functions amdgpu_dpm_get_sclk/mclk. They will then try to acquire the same adev->pm.mutex and deadlock will occur. By placing amdgpu_display_bandwidth_update outside of adev->pm.mutex protection(considering logically they do not need such protection) and restructuring the call flow accordingly, we can eliminate the deadlock issue. This comes with no real logics change. Fixes: 3712e7a4 ("drm/amd/pm: unified lock protections in amdgpu_dpm.c") Reported-by:
Paul Menzel <pmenzel@molgen.mpg.de> Reported-by:
Arthur Marsh <arthur.marsh@internode.on.net> Link: https://lore.kernel.org/all/9e689fea-6c69-f4b0-8dee-32c4cf7d8f9c@molgen.mpg.de/ BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1957Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
Tao Zhou authored
The fatal error handler is independent from general ras interrupt handler since there is no related IH ring. Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Tao Zhou authored
Add support for general RAS poison consumption handler. v2: remove callback function for poison consumption. Signed-off-by:
-
Tao Zhou authored
Prepare for the implementation of poison consumption handler. v2: separate umc handler from poison creation. Signed-off-by:
-
Yang Wang authored
simplify programming with existing functions. Signed-off-by:
Yang Wang <KevinYang.Wang@amd.com> Reviewed-by:
-
- 21 Apr, 2022 12 commits
-
-
Bokun Zhang authored
- In the latest version of the header, there is a variable name change. This should not cause any backward compatibility since the variable is at the same offset in the struct. Signed-off-by:
Bokun Zhang <Bokun.Zhang@amd.com> Acked-by:
-
Bokun Zhang authored
- Clean up the identation in the header file Signed-off-by:
-
Bokun Zhang authored
- Update MIT license header Signed-off-by:
-
Alex Deucher authored
It's not used outside of dcn31_hubp.c. Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Miaoqian Lin authored
When dcn20_clk_src_construct() fails, we need to release clk_src. Fixes: 6f4e6361 ("drm/amd/display: Add Renoir resource (v2)") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Signed-off-by:
-
Haowen Bai authored
aux_rep only memset but no use at all, so we drop it. Signed-off-by:
-
Alex Deucher authored
We normally runtime suspend when there are displays attached if they are in the DPMS off state, however, if something wakes the GPU we send a hotplug event on resume (in case any displays were connected while the GPU was in suspend) which can cause userspace to light up the displays again soon after they were turned off. Prior to commit 087451f3 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's."), the driver took a runtime pm reference when the fbdev emulation was enabled because we didn't implement proper shadowing support for vram access when the device was off so the device never runtime suspended when there was a console bound. Once that commit landed, we now utilize the core fb helper implementation which properly handles the emulation, so runtime pm now suspends in cases where it did not before. Ultimately, we need to sort out why runtime suspend in not working in this case for some users, but this should restore similar behavior to before. v2: move check into runtime_suspend v3: wake ups -> wakeups in comment, retain pm_runtime behavior in runtime_idle callback Fixes: 087451f3 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.") Link: https://lore.kernel.org/r/20220403132322.51c90903@darkstar.example.org/Tested-by:
Michele Ballabio <ballabio.m@gmail.com> Reviewed-by:
-
Lang Yu authored
This reverts commit 36bf9321. It causes SVM regressions on Vega10 with XNACK-ON. Just revert it at the moment. ./kfdtest --gtest_filter=KFDSVMRangeTest.MigratePolicyTest Signed-off-by:
Lang Yu <Lang.Yu@amd.com> Reviewed-by: Philip Yang<Philip.Yang@amd.com> Signed-off-by:
-
Candice Li authored
v1: Add debugfs support to load/unload/invoke TA in runtime. v2: 1. Update some variables to static. 2. Use PAGE_ALIGN to calculate shared buf size directly. 3. Remove fp check. 4. Update debugfs from read to write. Signed-off-by:
John Clements <john.clements@amd.com> Signed-off-by:
Candice Li <candice.li@amd.com> Reviewed-by:
-
Candice Li authored
The upcoming TA debugfs interface needs to use indirect buffer when performing TA invoke and check psp response status for TA load and invoke. Signed-off-by:
-
David Yat Sin authored
Add support to checkpoint/restore GWS (Global Wave Sync) queues. Signed-off-by:
David Yat Sin <david.yatsin@amd.com> Reviewed-by:
-
David Yat Sin authored
dqm->gws_queue_count and pdd->qpd.mapped_gws_queue need to be updated each time the queue gets evicted. Fixes: b8020b03 ("drm/amdkfd: Enable over-subscription with >1 GWS queue") Signed-off-by:
-
- 19 Apr, 2022 5 commits
-
-
Tales Lelo da Aparecida authored
To make sure maintainers of amdgpu drivers are aware of any changes in their documentation, add its entry to MAINTAINERS. Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Tales Lelo da Aparecida <tales.aparecida@gmail.com> Signed-off-by:
-
Tales Lelo da Aparecida authored
Add missing acronyms to the amdgppu glossary. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1939Acked-by:
-
Tom Rix authored
evergreen_default_state and evergreen_default_size are only used in evergreen.c. Single file symbols should be static. So move their definitions to evergreen_blit_shaders.h and change their storage-class-specifier to static. Remove unneeded evergreen_blit_shader.c evergreen_ps/vs definitions were removed with commit 4f862967 ("drm/radeon/kms: remove r6xx+ blit copy routines") So their declarations in evergreen_blit_shader.h are not needed, so remove them. Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
-
Tom Rix authored
Smatch reports this issue virtual_link_hwss.c:32:6: warning: symbol 'virtual_setup_stream_attribute' was not declared. Should it be static? virtual_setup_stream_attribute is only used in virtual_link_hwss.c, but the other functions in the file are declared in the header file and used elsewhere. For consistency, add the virtual_setup_stream_attribute decl to virtual_link_hwss.h. Signed-off-by:
-
Keita Suzuki authored
In function si_parse_power_table(), array adev->pm.dpm.ps and its member is allocated. If the allocation of each member fails, the array itself is freed and returned with an error code. However, the array is later freed again in si_dpm_fini() function which is called when the function returns an error. This leads to potential double free of the array adev->pm.dpm.ps, as well as leak of its array members, since the members are not freed in the allocation function and the array is not nulled when freed. In addition adev->pm.dpm.num_ps, which keeps track of the allocated array member, is not updated until the member allocation is successfully finished, this could also lead to either use after free, or uninitialized variable access in si_dpm_fini(). Fix this by postponing the free of the array until si_dpm_fini() and increment adev->pm.dpm.num_ps everytime the array member is allocated. Signed-off-by:
Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp> Signed-off-by:
-
