into suse.cz:/home/perex/bk/linux-sound/work

into suse.cz:/home/perex/bk/linux-sound/linux-sound

VIA82xx driver
Added a DXS whitelist entry for ABIT VA-20.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

MIXART driver
Fixed NULL pointer access when id string isn't given.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

CA0106 driver
I attach a minor update that corrects the DMA mask, and adds an extra
ID. This sound card can handle 32bit DMA addresses.
Signed-off-by: James Courtier-Dutton  <James@superbug.demon.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

AC97 Codec Core
Clean up the build of controls.  The volume resolution detection is
unified.
Fixed minor bugs to handle stereo mutes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Control Midlevel
Cleaned up the code to handle user-defined controls.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

into suse.cz:/home/perex/bk/linux-sound/work

into suse.cz:/home/perex/bk/linux-sound/linux-sound

au88x0 driver
Fixed possible spin deadlocks.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

OPL3,OPL4,I2C lib core,L3 drivers,AK4117 receiver,ALSA Core
EMU8000 driver,AC97 Codec Core,AK4531 codec
Added SNDRV_DEV_CODEC and SNDRV_DEV_BUS types to tell from the lowlevel
components.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

USB USX2Y
Removed the superfluous creation/deletion of lowlevel component.
It's not used at all.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

AZT3328 driver,CMIPCI driver,CS4281 driver,ENS1370/1+ driver
Maestro3 driver,SonicVibes driver,CS46xx driver,KORG1212 driver
NM256 driver,Trident driver,YMFPCI driver
Make sure that the chip instance is created at first before other components.
This will fix occasional oops at unloading due to the access to the released
resources.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA<-OSS emulation
Got rid of the unused float codes (the legacy code for sharing with ALSA
library).
Add assert to the invalid conversion indices which results in oops
(just to be sure).
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Documentation
Added the description about snd_card_set_dev().
Misc cleanup.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Control Midlevel
Implemented free callback to fix the release of control resources
before calling register.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Documentation
Updated descriptions about the firmware loading for the recent support of
hotplug firmware loader.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

RME HDSP driver
Added the hotplug firmware loader support without hdsploader.
The firmware data must be installed beforehand in the proper place from
the latest alsa-firmware package.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

EMU10K1/EMU10K2 driver
Removed an unused variable to fix a compile warning.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

AZT3328 driver
Fixed compile warning when built without joystick support.
(Optimized via inline.)
Signed-off-by: Takashi Iwai <tiwai@suse.de>

USB USX2Y
Return -EBUSY from snd_usX2Y_usbpcm_open(), if the associated hwdep
device is not opened.

It now works as originally intended. Had forgotten a pair of parenthesis.
Signed-off-by: Karsten Wiese <annabellesgarden@yahoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Remove nowhere referenced file. (egrep "filename\." didn't find
anything)
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Signed-off-by: Russell King <rmk@arm.linux.org.uk>

Signed-off-by: Russell King <rmk@arm.linux.org.uk>

Patch from Liam Girdwood

This patch allows the PXA SSP port configuration to be changed without
the need to close the port.

Signed-off-by: Liam Girdwood
Signed-off-by: Russell King

This changes kernel domains to use domain 0 rather than domain 1,
in preparation to supporting supersection mappings.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>

Patch from Liam Girdwood

This patch adds the PXA27x SSP port 3 configuration register space (Phys
0x41900000) to the kernel memory table.

Signed-off-by: Liam Girdwood
Signed-off-by: Russell King

into ppc970.osdl.org:/home/torvalds/v2.6/linux

From: Lennart Poettering

Trivial patch against Linux 2.6.10 which adds PNP support for a
certain kind of Rockwell 28.8/ISA modems.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Since all users of this have now been eliminated, we can eliminate
the element itself.  MMC host drivers now operate only on the
scatter lists passed to them, rather than needing knowledge of
block devices.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>

From: Pierre Ossman

Cleanup that fixes a warning in the wbsd module.

noexec_setup runs too late to take any effect, so parse it earlier.
Signed-off-by: Zwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>

sclp: core driver cleanup

Details:
- moved signal shutdown (quiesce) handling into a separate file
- cleanup of SCLP core driver:
  . introduced driver states instead of bits
  . introduced request retry count and retry limit
  . sclp_add_request now returns an error code if a request couldn't be started
  . introduced separate request structure for init_mask requests to simplify
    code
  . request timer is now manually checked in sclp_sync_wait because timer
    interrupts are disabled in this context
  . removed busy timer - request timer now handles both cases
  . split up sclp_start_request into __sclp_start_request and sclp_process
    queue
  . removed sclp_error_message (unused)
  . introduced sclp_check_handler function to split up initial init mask
    test from standard init mask request processing
  . introduced sclp_deactivate and sclp_reactivate for simplified reboot
    event handling (and potential use in suspend/resume scenario)
  . added protection against multiple concurrent init mask calls
- minor changes in SCLP core driver:
  . updated comments
  . renamed functions to be consistent with "function name starts with __ =>
    needs lock"
  . renamed internal functions for consistency reasons
  . introduced inlined helper functions to simplify code
  . moved EXPORT_SYMBOL definitions next to function definition
- changes in sclp console driver
  . removed callback recursion to prevent stack overflow
- changes to CPI module
  . added check for sclp_add_request return code
  . changed printks to specify a message level
- changes to generic sclp tty layer
  . removed timed buffer retry after error (timers may not work in some
    situations)
  . introduced return code for sclp_emit_buffer
- changes to sclp tty driver
  . removed callback recursion
- changes to sclp vt220 driver
  . removed callback recursion
  . removed timed buffer retry after error
- modified sclp_init_mask to prevent problems with some compiler versions
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Carsten Otte <cotte@de.ibm.com>

 - Fix codingstyle.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
From: Stefan Bader <shbader@de.ibm.com>

character device driver changes:
 - tape: Correct module count usage.
 - 3270: Use mod_timer only when timer is pending.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>

dasd driver changes:
 - Modify format analysis routine to use block size provided by on-disk label.
 - Search data structures when referencing use_diag/ro attribute values.
 - Correct return code checking when allocating memory.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Ursula Braun-Krahl <braunu@de.ibm.com>
From: Peter Tiedemann <ptiedem@de.ibm.com>
From: Thomas Spatzier <tspat@de.ibm.com>
From: Frank Pavlic <pavlic@de.ibm.com>

 - ctc: make sysfs attribute buffer early available.
 - ctc: remove memory leak for channel ccw struct.
 - qeth: remove redundant info card->info.ifname.
 - qeth: enable recovery with retries in qeth_hardsetup_card after unit check.
 - qeth: do not allow to set layer2 attribute on IQD devices.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Cornelia Huck <cohuck@de.ibm.com>

common i/o layer changes:

 - Cope with changed cdev->handler.
 - Split clearing of subchannels from reipl function and declare it in header.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>