- 10 Nov, 2004 5 commits
-
-
Dinakar Guniguntala authored
Only set the flag in the cases when the exit state is not either TASK_DEAD or TASK_ZOMBIE. (TASK_DEAD or TASK_ZOMBIE will either race or we'll return the information, so no need to note them). I confirmed that this fixes the problem and I also ran some LTP tests Signed-off-by: Dinakar Guniguntala <dino@in.ibm.com> Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Anton Altaparmakov authored
into cantab.net:/home/src/ntfs-2.6-devel
-
ssh://linux-ntfs@bkbits.net/ntfs-2.6-develAnton Altaparmakov authored
into cantab.net:/home/src/ntfs-2.6-devel
-
Anton Altaparmakov authored
- Cleanup fs/ntfs/aops.c::ntfs_{read,write}page() since we know that a resident attribute will be smaller than a page which makes the code simpler. Also make the code more tolerant to concurrent ->truncate. Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
-
Richard Russon authored
into flatcap.org:/home/flatcap/backup/bk/ntfs-2.6-devel
-
- 09 Nov, 2004 35 commits
-
-
Anton Altaparmakov authored
fs/ntfs/aops.c::ntfs_prepare_write() for now as it is not safe. Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
-
Anton Altaparmakov authored
Cannot just call fs/ntfs/aops.c::mark_ntfs_record_dirty() since this also marks the page dirty so we create the buffers by hand and set them uptodate. - Revert the removal of the page uptodate check from fs/ntfs/aops.c::mark_ntfs_record_dirty() as it is no longer called from fs/ntfs/mft.c::ntfs_sync_mft_mirror(). Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
-
Yoshinori Sato authored
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Yoshinori Sato authored
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Yoshinori Sato authored
Because reference of fls becomes error. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Yoshinori Sato authored
Eliminate useless clobber. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Kernel startup code specific to the Coldfire 5272 based CANcam board. Signed-off-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Move the ColdFire 5282 specific register definitions into a common 528x definition include. They can be used for all members of the 528x CPU family. Signed-off-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
The ColdFire 527x and 528x use the same FEC ethernet register offsets. Conditionally use the correct structure. Signed-off-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Remove unused include of asm/delay.h from ColdFire 5407 configuration code. Signed-off-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Move the M5282EVB kernel startup code from the 5282 specific platform directory to a common 528x platform directory. All ColdFire 582x CPU cores are the same, just minor peripheral differences. Renaming the sub-directory to match the proper board name (M5282EVB), not use the generic MOTOROLA. Signed-off-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Move the ColdFire 5282 specific platform Makefile into the common 528x CPU platform directory. Signed-off-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Move the ColdFire 5282 specific CPU configuration code into the common 528x CPU platform directory. It can be used for all members of the 528x CPU family. Signed-off-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Add kernel startup code for the Freescale 5275EVB board. Signed-off-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Anton Altaparmakov authored
fs/ntfs/aops.c::ntfs_write_mst_block(), mft.c::ntfs_sync_mft_mirror(), and write_mft_record_nolock(). From now on we require that the complete runlist for the mft mirror is always mapped into memory. - Add creation of buffers to fs/ntfs/mft.c::ntfs_sync_mft_mirror(). - Do not check for the page being uptodate in mark_ntfs_record_dirty() as we now call this after marking the page not uptodate during mft mirror synchronisation (fs/ntfs/mft.c::ntfs_sync_mft_mirror()). - Improve error handling in fs/ntfs/aops.c::ntfs_{read,write}_block(). Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
-
Anton Altaparmakov authored
into cantab.net:/home/src/ntfs-2.6-devel
-
Greg Ungerer authored
Create basic hardware configuration and setup code for the newly added Freescale 527x family of CPU's (5270/5271/5274/5275). Signed-off-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Determine the DRAM size dynamically for the MOTOROLA 5206e platform. We can just read back the SDRAM register configuration bits to determine what the RAM size really is. Signed-off-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Removed unused include of asm/delay.h. Add support for getting boot args from dedicated flash segment on the SCALES and CANcam boards. Signed-off-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Include linux/delay.h instead of asm/delay.h in ColdFire vector handling code. Signed-off-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Build the PIT timer code in for 528x and 527x CPU targets. Signed-off-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Makefile to support building the Freescale 527x platform support. Signed-off-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Updated default configuration for the m68knommu architectures. Adds newly created CPU and clock configurations. Signed-off-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Kernel startup code specific to the Freescale M5271EVB board. Signed-off-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
A big update to the ColdFire FEC ethernet driver. This has been in the works for a while (and thus tested for a while too). Fundamentally through there is 3 important changes: . support 528x and 527x device families . allow for multiple FEC devices to be present (for example 2 on the 5274/5) . support the Kendein 8721 PHY Signed-off-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Move the PIT timer code from the 5282 specific platform directory to the common ColdFire platform code directory (5307). Freescale are using the PIT timer on other devices now (at least the 523x and 527x families), so put it near the other common timer code so they can all use it easily. Signed-off-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andries E. Brouwer authored
-
Andries E. Brouwer authored
Sun tells me: For many years both Solaris x86 and Linux have used the same fdisk partition id of 0x82. Solaris uses that identifier to allocate disk space which is then further subdivided by the Solaris VTOC (Volume Table of Contents) and Linux uses that id as the identifier for its swap partition. The new release of Solaris should be out early next year. Solaris will begin using a partition id of 0xbf. We will continue to support the older partition id value of 0x82 for compatibility reasons. Solaris's fdisk program has been enhanced to allow system administrators to switch back and forth between the new and old identifier without any loss of data. So, this may be useful to some people a few months from now.
-
Andries E. Brouwer authored
Not surprisingly, the ext3 code crashes in the same way the ext2 code does when dividing by zero.
-
Andries E. Brouwer authored
-
Andries E. Brouwer authored
-
Andries E. Brouwer authored
I have directories full of typo corrections - don't know whether you want them. Below some wierds.
-
Andries E. Brouwer authored
Added the hp and 5xbsd flavors of ufstype.
-
Andries E. Brouwer authored
Removed barrier - it is not an ext2 option. Corrected the distinction between kernel-selected defaults and values read from the filesystem. Fixed some typos. Shortened line length to 80.
-
Benjamin Herrenschmidt authored
This implements support for doing a HW synchronization of the CPU timebases on SMP G5 machines. When the proper clock chips are found on i2c, they are used to stop the timebase clock source during the synchronization process. This replaces the software sync algorithm we used so far and provides slightly more precise results. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-