- 13 Jun, 2017 22 commits
-
-
Johan Hovold authored
Document that the child-node lookup helper takes a reference to the device-tree node which needs to be dropped after use. Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
Make sure to release any OF device-node reference taken when creating the USB device. Note that we currently do not hold a reference to the root hub device-tree node (i.e. the parent controller node). Fixes: 69bec725 ("USB: core: let USB device know device node") Cc: stable <stable@vger.kernel.org> # v4.6 Acked-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andy Shevchenko authored
Use sysfs_match_string() helper instead of open coded variant. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lu Baolu authored
Trace_printk() was used to log debug messages in xhci-dbc.c where printk() isn't feasible. As there should not be a single caller to trace_printk() in normal kernels, replace them with empty functions. Cc: Vlastimil Babka <vbabka.lkml@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arvind Yadav authored
clk_prepare_enable() can fail here and we must check its return value. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by:
Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yuyang Du authored
Each vhci has 2*VHCI_HC_PORTS ports, in which VHCI_HC_PORTS ports are HighSpeed (or below), and VHCI_HC_PORTS are SuperSpeed. This new macro VHCI_PORTS reflects this configuration. Signed-off-by:
Yuyang Du <yuyang.du@intel.com> Acked-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yuyang Du authored
As USB3 has (slightly) different bit meanings in the port status. Add a new status bit array for USB3. Signed-off-by:
Yuyang Du <yuyang.du@intel.com> Acked-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yuyang Du authored
With this patch, USB_SPEED_SUPER is a valid speed when attaching a USB3 SuperSpeed device. Signed-off-by:
Yuyang Du <yuyang.du@intel.com> Acked-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yuyang Du authored
This patch adds a USB3 HCD to an existing USB2 HCD and provides the support of SuperSpeed, in case the device can only be enumerated with SuperSpeed. The bulk of the added code in usb3_bos_desc and hub_control to support SuperSpeed is borrowed from the commit 1cd8fd28 ("usb: gadget: dummy_hcd: add SuperSpeed support"). With this patch, each vhci will have VHCI_HC_PORTS HighSpeed ports and VHCI_HC_PORTS SuperSpeed ports. Suggested-by:
Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by:
Yuyang Du <yuyang.du@intel.com> Acked-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yuyang Du authored
This patch enables the new vhci structure. Its lock protects both the USB2 hub and the shared USB3 hub. Signed-off-by:
Yuyang Du <yuyang.du@intel.com> Acked-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yuyang Du authored
A vhci struct is added as the platform-specific data to the vhci platform device, in order to get the vhci by its platform device. This is done in vhci_hcd_init(). Signed-off-by:
Yuyang Du <yuyang.du@intel.com> Acked-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yuyang Du authored
Every VHCI is a platform device, so move the platform_device struct into the VHCI struct. Signed-off-by:
Yuyang Du <yuyang.du@intel.com> Acked-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yuyang Du authored
In order to support SuperSpeed devices, a USB3 HCD is added to share the USB2 HCD. As a result, a VHCI is composed of two vhci_hcds associated with the two HCDs respectively. So we add another level of abstraction, vhci, and thus this vhci structure. Signed-off-by:
Yuyang Du <yuyang.du@intel.com> Acked-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yuyang Du authored
These helper function names are renamed to have their full struct names to avoid confusion: - hcd_to_vhci() -> hcd_to_vhci_hcd() - vhci_to_hcd() -> vhci_hcd_to_hcd() - vdev_to_vhci() -> vdev_to_vhci_hcd() Signed-off-by:
Yuyang Du <yuyang.du@intel.com> Acked-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arvind Yadav authored
clk_prepare_enable() can fail here and we must check its return value. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Benjamin Herrenschmidt authored
The current definition is wrong. This breaks my upcoming Aspeed virtual hub driver. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yuyang Du authored
In parse_status(), all nports number of idev's are initiated to 0 by memset(), it is simply wrong, because parse_status() reads the status sys file one by one, therefore, it can only update the according vhci_driver->idev's for it to parse. Reviewed-by:
Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by:
Yuyang Du <yuyang.du@intel.com> Acked-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yuyang Du authored
The commit 0775a9cb ("usbip: vhci extension: modifications to vhci driver") introduced multiple controllers, but the status of the ports are only extracted from the first status file, fix it. Reviewed-by:
Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by:
Yuyang Du <yuyang.du@intel.com> Acked-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yuyang Du authored
A new field ncontrollers is added to the vhci_driver structure. And this field is stored by scanning the vhci_hcd* dirs in the platform udev. Suggested-and-reviewed-by:
Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by:
Yuyang Du <yuyang.du@intel.com> Acked-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yuyang Du authored
If we get nonpositive number of ports, there is no sense to continue, then fail gracefully. In addition, the commit 0775a9cb ("usbip: vhci extension: modifications to vhci driver") introduced configurable numbers of controllers and ports, but we have a static port number maximum, MAXNPORT. If exceeded, the idev array will be overflown. We fix it by validating the nports to make sure the port number max is not exceeded. Reviewed-by:
Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by:
Yuyang Du <yuyang.du@intel.com> Acked-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Grzeschik authored
The usbip stack dynamically allocates the transfer_buffer and setup_packet of each urb that got generated by the tcp to usb stub code. As these pointers are always used only once we will set them to NULL after use. This is done likewise to the free_urb code in vudc_dev.c. This patch fixes double kfree situations where the usbip remote side added the URB_FREE_BUFFER. Cc: stable@vger.kernel.org Signed-off-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Acked-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
The usbfs interface does not provide any way for the user to learn the speed at which a device is connected. The current API includes a USBDEVFS_CONNECTINFO ioctl, but all it provides is the device's address and a one-bit value indicating whether the connection is low speed. That may have sufficed in the era of USB-1.1, but it isn't good enough today. This patch introduces a new ioctl, USBDEVFS_GET_SPEED, which returns a numeric value indicating the speed of the connection: unknown, low, full, high, wireless, super, or super-plus. Similar information (not exactly the same) is available through sysfs, but it seems reasonable to provide the actual value in usbfs. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Reinhard Huck <reinhard.huck@thesycon.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 12 Jun, 2017 1 commit
-
-
Greg Kroah-Hartman authored
We want the USB fixes in here as well. Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 11 Jun, 2017 15 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull key subsystem fixes from James Morris: "Here are a bunch of fixes for Linux keyrings, including: - Fix up the refcount handling now that key structs use the refcount_t type and the refcount_t ops don't allow a 0->1 transition. - Fix a potential NULL deref after error in x509_cert_parse(). - Don't put data for the crypto algorithms to use on the stack. - Fix the handling of a null payload being passed to add_key(). - Fix incorrect cleanup an uninitialised key_preparsed_payload in key_update(). - Explicit sanitisation of potentially secure data before freeing. - Fixes for the Diffie-Helman code" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (23 commits) KEYS: fix refcount_inc() on zero KEYS: Convert KEYCTL_DH_COMPUTE to use the crypto KPP API crypto : asymmetric_keys : verify_pefile:zero memory content before freeing KEYS: DH: add __user annotations to keyctl_kdf_params KEYS: DH: ensure the KDF counter is properly aligned KEYS: DH: don't feed uninitialized "otherinfo" into KDF KEYS: DH: forbid using digest_null as the KDF hash KEYS: sanitize key structs before freeing KEYS: trusted: sanitize all key material KEYS: encrypted: sanitize all key material KEYS: user_defined: sanitize key payloads KEYS: sanitize add_key() and keyctl() key payloads KEYS: fix freeing uninitialized memory in key_update() KEYS: fix dereferencing NULL payload with nonzero length KEYS: encrypted: use constant-time HMAC comparison KEYS: encrypted: fix race causing incorrect HMAC calculations KEYS: encrypted: fix buffer overread in valid_master_desc() KEYS: encrypted: avoid encrypting/decrypting stack buffers KEYS: put keyring if install_session_keyring_to_cred() fails KEYS: Delete an error message for a failed memory allocation in get_derived_key() ...
-
Linus Torvalds authored
Commit abb2ea7d ("compiler, clang: suppress warning for unused static inline functions") just caused more warnings due to re-defining the 'inline' macro. So undef it before re-defining it, and also add the 'notrace' attribute like the gcc version that this is overriding does. Maybe this makes clang happier. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/randomLinus Torvalds authored
Pull randomness fixes from Ted Ts'o: "Improve performance by using a lockless update mechanism suggested by Linus, and make sure we refresh per-CPU entropy returned get_random_* as soon as the CRNG is initialized" * tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: invalidate batched entropy after crng init random: use lockless method of accessing and updating f->reg_idx
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Fix various bug fixes in ext4 caused by races and memory allocation failures" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix fdatasync(2) after extent manipulation operations ext4: fix data corruption for mmap writes ext4: fix data corruption with EXT4_GET_BLOCKS_ZERO ext4: fix quota charging for shared xattr blocks ext4: remove redundant check for encrypted file on dio write path ext4: remove unused d_name argument from ext4_search_dir() et al. ext4: fix off-by-one error when writing back pages before dio read ext4: fix off-by-one on max nr_pages in ext4_find_unwritten_pgoff() ext4: keep existing extra fields when inode expands ext4: handle the rest of ext4_mb_load_buddy() ENOMEM errors ext4: fix off-by-in in loop termination in ext4_find_unwritten_pgoff() ext4: fix SEEK_HOLE jbd2: preserve original nofs flag during journal restart ext4: clear lockdep subtype for quota files on quota off
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: "A few overdue GPIO patches for the v4.12 kernel. - Fix debounce logic on the Aspeed platform. - Fix the "virtual gpio" things on the Intel Crystal Cove. - Fix the blink counter selection on the MVEBU platform" * tag 'gpio-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: mvebu: fix gpio bank registration when pwm is used gpio: mvebu: fix blink counter register selection MAINTAINERS: remove self from GPIO maintainers gpio: crystalcove: Do not write regular gpio registers for virtual GPIOs gpio: aspeed: Don't attempt to debounce if disabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small driver fixes for 4.12-rc5. Nothing major here, just some small bugfixes found by people testing, and a MAINTAINERS file update for the genwqe driver. All have been in linux-next with no reported issues" [ The cxl driver fix came in through the powerpc tree earlier ] * tag 'char-misc-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: cxl: Avoid double free_irq() for psl,slice interrupts mei: make sysfs modalias format similar as uevent modalias drivers: char: mem: Fix wraparound check to allow mappings up to the end MAINTAINERS: Change maintainer of genwqe driver goldfish_pipe: use GFP_ATOMIC under spin lock firmware: vpd: do not leak kobjects firmware: vpd: avoid potential use-after-free when destroying section firmware: vpd: do not leave freed section attributes to the list
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/IIO fixes from Greg KH: "These are mostly all IIO driver fixes, resolving a number of tiny issues. There's also a ccree and lustre fix in here as well, both fix problems found in those codebases. All have been in linux-next with no reported issues" * tag 'staging-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: ccree: fix buffer copy staging/lustre/lov: remove set_fs() call from lov_getstripe() staging: ccree: add CRYPTO dependency iio: adc: sun4i-gpadc-iio: fix parent device being used in devm function iio: light: ltr501 Fix interchanged als/ps register field iio: adc: bcm_iproc_adc: swap primary and secondary isr handler's iio: trigger: fix NULL pointer dereference in iio_trigger_write_current() iio: adc: max9611: Fix attribute measure unit iio: adc: ti_am335x_adc: allocating too much in probe iio: adc: sun4i-gpadc-iio: Fix module autoload when OF devices are registered iio: adc: sun4i-gpadc-iio: Fix module autoload when PLATFORM devices are registered iio: proximity: as3935: fix iio_trigger_poll issue iio: proximity: as3935: fix AS3935_INT mask iio: adc: Max9611: checking for ERR_PTR instead of NULL in probe iio: proximity: as3935: recalibrate RCO after resume
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some small USB fixes for 4.12-rc5 They are for some reported issues in the chipidea and gadget drivers. Nothing major. All have been in linux-next for a while with no reported issues" * tag 'usb-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: gadget: udc: renesas_usb3: Fix PN_INT_ENA disabling timing usb: gadget: udc: renesas_usb3: lock for PN_ registers access usb: gadget: udc: renesas_usb3: fix deadlock by spinlock usb: gadget: udc: renesas_usb3: fix pm_runtime functions calling usb: gadget: f_mass_storage: Serialize wake and sleep execution usb: dwc2: add support for the DWC2 controller on Meson8 SoCs phy: qualcomm: phy-qcom-qmp: fix application of sizeof to pointer usb: musb: dsps: keep VBUS on for host-only mode usb: chipidea: core: check before accessing ci_role in ci_role_show usb: chipidea: debug: check before accessing ci_role phy: qcom-qmp: fix return value check in qcom_qmp_phy_create() usb: chipidea: udc: fix NULL pointer dereference if udc_start failed usb: chipidea: imx: Do not access CLKONOFF on i.MX51
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is a set of user visible fixes (excepting one format string change). Four of the qla2xxx fixes only affect the firmware dump path, but it's still important to the enterprise. The rest are various NULL pointer crash conditions or outright driver hangs" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: cxgb4i: libcxgbi: in error case RST tcp conn scsi: scsi_debug: Avoid PI being disabled when TPGS is enabled scsi: qla2xxx: Fix extraneous ref on sp's after adapter break scsi: lpfc: prevent potential null pointer dereference scsi: lpfc: Avoid NULL pointer dereference in lpfc_els_abort() scsi: lpfc: nvmet_fc: fix format string scsi: qla2xxx: Fix crash due to NULL pointer dereference of ctx scsi: qla2xxx: Fix mailbox pointer error in fwdump capture scsi: qla2xxx: Set bit 15 for DIAG_ECHO_TEST MBC scsi: qla2xxx: Modify T262 FW dump template to specify same start/end to debug customer issues scsi: qla2xxx: Fix crash due to mismatch mumber of Q-pair creation for Multi queue scsi: qla2xxx: Fix NULL pointer access due to redundant fc_host_port_name call scsi: qla2xxx: Fix recursive loop during target mode configuration for ISP25XX leaving system unresponsive scsi: bnx2fc: fix race condition in bnx2fc_get_host_stats() scsi: qla2xxx: don't disable a not previously enabled PCI device
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fix from Dan Williams: "We expanded the device-dax fs type in 4.12 to be a generic provider of a struct dax_device with an embedded inode. However, Sasha found some basic negative testing was not run to verify that this fs cleanly handles being mounted directly. Note that the fresh rebase was done to remove an unnecessary Cc: <stable> tag, but this commit otherwise had a build success notification from the 0day robot." * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: fix 'dax' device filesystem inode destruction crash
-
Linus Torvalds authored
Merge tag 'hexagon-for-linus-v4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hexagon fix from Guenter Roeck: "This fixes a build error seen when building hexagon images. Richard sent me an Ack, but didn't reply when asked if he wants me to send the patch to you directly, so I figured I'd just do it" * tag 'hexagon-for-linus-v4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hexagon: Use raw_copy_to_user
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "Bug fixes (ARM, s390, x86)" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: async_pf: avoid async pf injection when in guest mode KVM: cpuid: Fix read/write out-of-bounds vulnerability in cpuid emulation arm: KVM: Allow unaligned accesses at HYP arm64: KVM: Allow unaligned accesses at EL2 arm64: KVM: Preserve RES1 bits in SCTLR_EL2 KVM: arm/arm64: Handle possible NULL stage2 pud when ageing pages KVM: nVMX: Fix exception injection kvm: async_pf: fix rcu_irq_enter() with irqs enabled KVM: arm/arm64: vgic-v3: Fix nr_pre_bits bitfield extraction KVM: s390: fix ais handling vs cpu model KVM: arm/arm64: Fix isues with GICv2 on GICv3 migration
-
Wanpeng Li authored
INFO: task gnome-terminal-:1734 blocked for more than 120 seconds. Not tainted 4.12.0-rc4+ #8 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. gnome-terminal- D 0 1734 1015 0x00000000 Call Trace: __schedule+0x3cd/0xb30 schedule+0x40/0x90 kvm_async_pf_task_wait+0x1cc/0x270 ? __vfs_read+0x37/0x150 ? prepare_to_swait+0x22/0x70 do_async_page_fault+0x77/0xb0 ? do_async_page_fault+0x77/0xb0 async_page_fault+0x28/0x30 This is triggered by running both win7 and win2016 on L1 KVM simultaneously, and then gives stress to memory on L1, I can observed this hang on L1 when at least ~70% swap area is occupied on L0. This is due to async pf was injected to L2 which should be injected to L1, L2 guest starts receiving pagefault w/ bogus %cr2(apf token from the host actually), and L1 guest starts accumulating tasks stuck in D state in kvm_async_pf_task_wait() since missing PAGE_READY async_pfs. This patch fixes the hang by doing async pf when executing L1 guest. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Guenter Roeck authored
Commit ac4691fa ("hexagon: switch to RAW_COPY_USER") replaced __copy_to_user_hexagon() with raw_copy_to_user(), but did not catch all callers, resulting in the following build error. arch/hexagon/mm/uaccess.c: In function '__clear_user_hexagon': arch/hexagon/mm/uaccess.c:40:3: error: implicit declaration of function '__copy_to_user_hexagon' Fixes: ac4691fa ("hexagon: switch to RAW_COPY_USER") Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by:
Al Viro <viro@zeniv.linux.org.uk> Acked-by:
Richard Kuo <rkuo@codeaurora.org> Signed-off-by:
Guenter Roeck <linux@roeck-us.net>
-
- 10 Jun, 2017 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull UFS fixes from Al Viro: "This is just the obvious backport fodder; I'm pretty sure that there will be more - definitely so wrt performance and quite possibly correctness as well" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ufs: we need to sync inode before freeing it excessive checks in ufs_write_failed() and ufs_evict_inode() ufs_getfrag_block(): we only grab ->truncate_mutex on block creation path ufs_extend_tail(): fix the braino in calling conventions of ufs_new_fragments() ufs: set correct ->s_maxsize ufs: restore maintaining ->i_blocks fix ufs_isblockset() ufs: restore proper tail allocation
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "Some fixes that Dave Sterba collected. We've been hitting an early enospc problem on production machines that Omar tracked down to an old int->u64 mistake. I waited a bit on this pull to make sure it was really the problem from production, but it's on ~2100 hosts now and I think we're good. Omar also noticed a commit in the queue would make new early ENOSPC problems. I pulled that out for now, which is why the top three commits are younger than the rest. Otherwise these are all fixes, some explaining very old bugs that we've been poking at for a while" * 'for-linus-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix delalloc accounting leak caused by u32 overflow Btrfs: clear EXTENT_DEFRAG bits in finish_ordered_io btrfs: tree-log.c: Wrong printk information about namelen btrfs: fix race with relocation recovery and fs_root setup btrfs: fix memory leak in update_space_info failure path btrfs: use correct types for page indices in btrfs_page_exists_in_range btrfs: fix incorrect error return ret being passed to mapping_set_error btrfs: Make flush bios explicitely sync btrfs: fiemap: Cache and merge fiemap extent before submit it to user
-