- 04 Nov, 2022 2 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-gt-next-2022-11-03' of git://anongit.freedesktop.org/drm/drm-intel into drm-next Driver Changes: - Fix for #7306: [Arc A380] white flickering when using arc as a secondary gpu (Matt A) - Add Wa_18017747507 for DG2 (Wayne) - Avoid spurious WARN on DG1 due to incorrect cache_dirty flag (Niranjana, Matt A) - Corrections to CS timestamp support for Gen5 and earlier (Ville) - Fix a build error used with clang compiler on hwmon (GG) - Improvements to LMEM handling with RPM (Anshuman, Matt A) - Cleanups in dmabuf code (Mike) - Selftest improvements (Matt A) Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y2N11wu175p6qeEN@jlahtine-mobl.ger.corp.intel.com
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 6.2: UAPI Changes: Cross-subsystem Changes: - dma-buf: locking improvements - firmware: New API in the RaspberryPi firmware driver used by vc4 Core Changes: - client: Null pointer dereference fix in drm_client_buffer_delete() - mm/buddy: Add back random seed log - ttm: Convert ttm_resource to use size_t for its size, fix for an undefined behaviour Driver Changes: - bridge: - adv7511: use dev_err_probe - it6505: Fix return value check of pm_runtime_get_sync - panel: - sitronix: Fixes and clean-ups - lcdif: Increase DMA burst size - rockchip: runtime_pm improvements - vc4: Fix for a regression preventing the use of 4k @ 60Hz, and further HDMI rate constraints check. - vmwgfx: Cursor improvements Signed-off-by:
-
- 03 Nov, 2022 1 commit
-
-
Gwan-gyeong Mun authored
Use REG_FIELD_PREP() and a constant value for hwm_field_scale_and_write() If the first argument of FIELD_PREP() is not a compile-time constant value or unsigned long long type, this routine of the __BF_FIELD_CHECK() macro used internally by the FIELD_PREP() macro always returns false. BUILD_BUG_ON_MSG(__bf_cast_unsigned(_mask, _mask) > \ __bf_cast_unsigned(_reg, ~0ull), \ _pfx "type of reg too small for mask"); \ And it returns a build error by the option among the clang compilation options. [-Werror,-Wtautological-constant-out-of-range-compare] Reported build error while using clang compiler: drivers/gpu/drm/i915/i915_hwmon.c:115:16: error: result of comparison of constant 18446744073709551615 with expression of type 'typeof (_Generic((field_msk), char: (unsigned char)0, unsigned char: (unsigned char)0, signed char: (unsigned char)0, unsigned short: (unsigned short)0, short: (unsigned short)0, unsigned int: (unsigned int)0, int: (unsigned int)0, unsigned long: (unsigned long)0, long: (unsigned long)0, unsigned long long: (unsigned long long)0, long long: (unsigned long long)0, default: (field_msk)))' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare] bits_to_set = FIELD_PREP(field_msk, nval); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/linux/bitfield.h:114:3: note: expanded from macro 'FIELD_PREP' __BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_PREP: "); \ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/linux/bitfield.h:71:53: note: expanded from macro '__BF_FIELD_CHECK' BUILD_BUG_ON_MSG(__bf_cast_unsigned(_mask, _mask) > \ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~ ./include/linux/build_bug.h:39:58: note: expanded from macro 'BUILD_BUG_ON_MSG' ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~ ./include/linux/compiler_types.h:357:22: note: expanded from macro 'compiletime_assert' _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/linux/compiler_types.h:345:23: note: expanded from macro '_compiletime_assert' __compiletime_assert(condition, msg, prefix, suffix) ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/linux/compiler_types.h:337:9: note: expanded from macro '__compiletime_assert' if (!(condition)) \ v2: Use REG_FIELD_PREP() macro instead of FIELD_PREP() (Jani) Fixes: 99f55efb ("drm/i915/hwmon: Power PL1 limit and TDP setting") Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Acked-by:
Jani Nikula <jani.nikula@intel.com> [Joonas: Wrapped commit message error line length to be more reasonable] Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221029044230.32128-1-gwan-gyeong.mun@intel.com
-
- 02 Nov, 2022 11 commits
-
-
Niranjana Vishwanathapura authored
Currently on DG1, which does not have LLC, we hit the below warning while rebinding an userptr invalidated object. WARNING: CPU: 4 PID: 13008 at drivers/gpu/drm/i915/gem/i915_gem_pages.c:34 __i915_gem_object_set_pages+0x296/0x2d0 [i915] ... RIP: 0010:__i915_gem_object_set_pages+0x296/0x2d0 [i915] ... Call Trace: <TASK> i915_gem_userptr_get_pages+0x175/0x1a0 [i915] ____i915_gem_object_get_pages+0x32/0xb0 [i915] i915_gem_object_userptr_submit_init+0x286/0x470 [i915] eb_lookup_vmas+0x2ff/0xcf0 [i915] ? __intel_wakeref_get_first+0x55/0xb0 [i915] i915_gem_do_execbuffer+0x785/0x21d0 [i915] i915_gem_execbuffer2_ioctl+0xe7/0x3d0 [i915] We shouldn't be setting the obj->cache_dirty for DGFX, fix it. Fixes: d70af579 ("drm/i915/shmem: ensure flush during swap-in on non-LLC") Suggested-by:
Matthew Auld <matthew.auld@intel.com> Reported-by:
Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by:
Nirmoy Das <nirmoy.das@intel.com> Reviewed-by:
Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by:
-
Arthur Grillo authored
As reported by Michał, the drm_mm and drm_buddy unit tests lost the printk with seed value after they were refactored into KUnit. Add kunit_info with seed value information to assure reproducibility. Reported-by:
Michał Winiarski <michal.winiarski@intel.com> Signed-off-by:
Arthur Grillo <arthurgrillo@riseup.net> Signed-off-by:
Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20221028221755.340487-1-arthurgrillo@riseup.net
-
Dmitry Osipenko authored
The drm_gem_vunmap() will crash with a NULL dereference if the passed object pointer is NULL. It wasn't a problem before we added the locking support to drm_gem_vunmap function because the mapping argument was always NULL together with the object. Make drm_client_buffer_delete() to check whether GEM is NULL before trying to unmap the GEM, it will happen on framebuffer creation error. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/dri-devel/Y1kFEGxT8MVlf32V@kili/ Fixes: 79e2cf2e ("drm/gem: Take reservation lock for vmap/vunmap operations") Signed-off-by:
Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221030154412.8320-3-dmitry.osipenko@collabora.com
-
Dmitry Osipenko authored
The dma_buf_detach() locks attach->dmabuf->resv and then unlocks dmabuf->resv, which could be a two different locks from a static code checker perspective. In particular this triggers Smatch to report the "double unlock" error. Make the locking pointers consistent. Reported-by:
-
Gaosheng Cui authored
Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. The UBSAN warning calltrace like below: UBSAN: shift-out-of-bounds in ./include/drm/ttm/ttm_tt.h:122:26 left shift of 1 by 31 places cannot be represented in type 'int' Call Trace: <TASK> dump_stack_lvl+0x7d/0xa5 dump_stack+0x15/0x1b ubsan_epilogue+0xe/0x4e __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c ttm_bo_move_memcpy+0x3b4/0x460 [ttm] bo_driver_move+0x32/0x40 [drm_vram_helper] ttm_bo_handle_move_mem+0x118/0x200 [ttm] ttm_bo_validate+0xfa/0x220 [ttm] drm_gem_vram_pin_locked+0x70/0x1b0 [drm_vram_helper] drm_gem_vram_pin+0x48/0xb0 [drm_vram_helper] drm_gem_vram_plane_helper_prepare_fb+0x53/0xe0 [drm_vram_helper] drm_gem_vram_simple_display_pipe_prepare_fb+0x26/0x30 [drm_vram_helper] drm_simple_kms_plane_prepare_fb+0x4d/0xe0 [drm_kms_helper] drm_atomic_helper_prepare_planes+0xda/0x210 [drm_kms_helper] drm_atomic_helper_commit+0xc3/0x1e0 [drm_kms_helper] drm_atomic_commit+0x9c/0x160 [drm] drm_client_modeset_commit_atomic+0x33a/0x380 [drm] drm_client_modeset_commit_locked+0x77/0x220 [drm] drm_client_modeset_commit+0x31/0x60 [drm] __drm_fb_helper_restore_fbdev_mode_unlocked+0xa7/0x170 [drm_kms_helper] drm_fb_helper_set_par+0x51/0x90 [drm_kms_helper] fbcon_init+0x316/0x790 visual_init+0x113/0x1d0 do_bind_con_driver+0x2a3/0x5c0 do_take_over_console+0xa9/0x270 do_fbcon_takeover+0xa1/0x170 do_fb_registered+0x2a8/0x340 fbcon_fb_registered+0x47/0xe0 register_framebuffer+0x294/0x4a0 __drm_fb_helper_initial_config_and_unlock+0x43c/0x880 [drm_kms_helper] drm_fb_helper_initial_config+0x52/0x80 [drm_kms_helper] drm_fbdev_client_hotplug+0x156/0x1b0 [drm_kms_helper] drm_fbdev_generic_setup+0xfc/0x290 [drm_kms_helper] bochs_pci_probe+0x6ca/0x772 [bochs] local_pci_probe+0x4d/0xb0 pci_device_probe+0x119/0x320 really_probe+0x181/0x550 __driver_probe_device+0xc6/0x220 driver_probe_device+0x32/0x100 __driver_attach+0x195/0x200 bus_for_each_dev+0xbb/0x120 driver_attach+0x27/0x30 bus_add_driver+0x22e/0x2f0 driver_register+0xa9/0x190 __pci_register_driver+0x90/0xa0 bochs_pci_driver_init+0x52/0x1000 [bochs] do_one_initcall+0x76/0x430 do_init_module+0x61/0x28a load_module+0x1f82/0x2e50 __do_sys_finit_module+0xf8/0x190 __x64_sys_finit_module+0x23/0x30 do_syscall_64+0x58/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> Fixes: 3312be8f ("drm/ttm: move populated state into page flags") Signed-off-by:
Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by:
-
Ville Syrjälä authored
Now that we know the ring timestamp frequency on gen4/5 we can run the perf tests that depend on sampling the timestamp. On g4x/ilk we must read the udw of the 64bit timestamp register. Details in {g4x,gen5)_read_clock_frequency(). When executing the read via the CS i965 doesn't seem to need the double read trick that CPU mmio reads need. Signed-off-by:Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221031135703.14670-7-ville.syrjala@linux.intel.comReviewed-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com>
-
Ville Syrjälä authored
Now that we actually know the cs timestamp frequency on gen4/5 let's run the corresponding test. On g4x/ilk we must read the udw of the 64bit timestamp register. Details in {g4x,gen5)_read_clock_frequency(). The one extra caveat is that on i965 (or at least CL, don't recall if I ever tested on BW) we must read the register twice to get an up to date value. For some unknown reason the first read tends to return a stale value. Signed-off-by: -
Ville Syrjälä authored
SNB does have the RING_TIMESTAMP register on the RCS engine. Run the MI_BB perf tests on it. Signed-off-by:
-
Ville Syrjälä authored
Despite what the spec says the TIMESTAMP register seems to tick once every hrawclk (confirmed on i965gm and g35). v2: Rebase Signed-off-by:
-
Ville Syrjälä authored
Gen2/3 have no TIMESTAMP registers to sample so no point in thinking we have any frequency for it either. Signed-off-by:
-
Ville Syrjälä authored
On ilk the UDW of TIMESTAMP increments every 1000 ns, LDW is mbz. In order to represent that we'd need 52 bits, but we only have 32 bits. Even worse most things want to only deal with 32 bits of timestamp. So let's just set up the timestamp frequency as if we only had the UDW. On ctg/elk 63:20 of TIMESTAMP increments every 1/4 ns, 19:0 are mbz. To make life simpler let's ignore the LDW and set up timestamp frequency based on the UDW only (increments every 1024 ns). v2: Rebase Signed-off-by:
-
- 01 Nov, 2022 6 commits
-
-
Marek Vasut authored
In case mipi_dsi_attach() fails, call drm_panel_remove() to avoid memory leak. Fixes: 849b2e3f ("drm/panel: Add Sitronix ST7701 panel driver") Signed-off-by:
Marek Vasut <marex@denx.de> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221014231106.468063-1-marex@denx.de
-
Marek Vasut authored
There are two command register files, CMD1 and CMD2, where only the CMD2 contains additional register sub-files BK0..3 . Pull the register file selection call into separate function instead of duplicating it all over the driver. The CMD2BK2 file is undocumented in datasheet, and is used for BIST. No functional change. Signed-off-by:
-
Wayne Boyer authored
WA 18017747507 applies to all DG2 skus. BSpec: 56035, 46121, 68173 Signed-off-by:
Wayne Boyer <wayne.boyer@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Marek Vasut authored
The RTNI field is multiplied by 16 and incremented by 512 before being used as the minimum number of pixel clock per horizontal line, hence it is necessary to subtract those 512 bytes from htotal and then divide the result by 16 before writing the value into the RTNI field. Fix the calculation. Fixes: de2b4917 ("drm/panel/panel-sitronix-st7701: Infer horizontal pixel count from TFT mode") Signed-off-by:
-
Marco Felsch authored
If a axi bus master with a higher priority do a lot of memory access FIFO underruns can be inspected. Increase the burst size to 256B to avoid such underruns and to improve the memory access efficiency. Fixes: 9db35bb3 ("drm: lcdif: Add support for i.MX8MP LCDIF variant") Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Reviewed-by:
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
- Hotplug code clean-up and organization (Jani, Gustavo) - More VBT specific code clean-up, doc, organization, and improvements (Ville) - More MTL enabling work (Matt, RK, Anusha, Jose) - FBC related clean-ups and improvements (Ville) - Removing unused sw_fence_await_reservation (Niranjana) - Big chunch of display house clean-up (Ville) - Many Watermark fixes and clean-ups (Ville) - Fix device info for devices without display (Jani) - Fix TC port PLLs after readout (Ville) - DPLL ID clean-ups (Ville) - Prep work for finishing (de)gamma readout (Ville) - PSR fixes and improvements (Jouni, Jose) - Reject excessive dotclocks early (Ville) - DRRS related improvements (Ville) - Simplify uncore register updates (Andrzej) - Fix simulated GPU reset wrt. encoder HW readout (Imre) - Add a ADL-P workaround (Jose) - Fix clear mask in GEN7_MISCCPCTL update (Andrzej) - Temporarily disable runtime_pm for discrete (Anshuman) - Improve fbdev debugs (Nirmoy) - Fix DP FRL link training status (Ankit) - Other small display fixes (Ankit, Suraj) - Allow panel fixed modes to have differing sync polarities (Ville) - Clean up crtc state flag checks (Ville) - Fix race conditions during DKL PHY accesses (Imre) - Prep-work for cdclock squash and crawl modes (Anusha) - ELD precompute and readout (Ville) Signed-off-by:
-
- 31 Oct, 2022 8 commits
-
-
Zack Rusin authored
Cursor snooping depended on implicit size and format which made debugging quite difficult. Make the code easier to following by making everything explicit and instead of using magic numbers predefine all the parameters the code depends on. Also fixes incorrectly computed pitches for non-aligned cursor snoops. Fix which has no practical effect because non-aligned cursor snoops are not used by the X11 driver and Wayland cursors will go through mob cursors, instead of surface dma's. Signed-off-by:
Zack Rusin <zackr@vmware.com> Reviewed-by:
Michael Banack <banackm@vmware.com> Reviewed-by:
Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026031936.1004280-2-zack@kde.org
-
Zack Rusin authored
Invalid userspace dma surface copies could potentially overflow the memcpy from the surface to the snooped image leading to crashes. To fix it the dimensions of the copybox have to be validated against the expected size of the snooped cursor. Signed-off-by:
-
Michael J. Ruhl authored
Update open coded for loop to use the standard scatterlist for_each_sg API. Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by:
-
Michael J. Ruhl authored
Some minor cleanup of some variables for consistency. Normalize struct sg_table to sgt. Normalize struct dma_buf_attachment to attach. checkpatch issues sizeof(), !NULL updates. Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
-
Matthew Auld authored
Using PAGE_SIZE here potentially hides issues so bump that to something larger. This should also make it possible for iommu to coalesce entries for us. With that in place verify we can write from the GPU using the importers sg_table, followed by checking that our writes match when read from the CPU side. v2: Switch over to igt_gpu_fill_dw(), which looks to be more widely supported than the migrate stuff (at least OOTB). References: https://gitlab.freedesktop.org/drm/intel/-/issues/7306Signed-off-by:
-
Matthew Auld authored
We need to iterate over the original entries here for the sg_table, pulling out the struct page for each one, to be remapped. However currently this incorrectly iterates over the final dma mapped entries, which is likely just one gigantic sg entry if the iommu is enabled, leading to us only mapping the first struct page (and any physically contiguous pages following it), even if there is potentially lots more data to follow. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7306 Fixes: 1286ff73 ("i915: add dmabuf/prime buffer sharing support.") Signed-off-by:
-
Anshuman Gupta authored
We had already grabbed the rpm wakeref at obj destruction path, but it also required to grab the wakeref when object moves. When i915_gem_object_release_mmap_offset() gets called by i915_ttm_move_notify(), it will release the mmap offset without grabbing the wakeref. We want to avoid that therefore, grab the wakeref at i915_ttm_unmap_virtual() accordingly. While doing that also changed the lmem_userfault_lock from mutex to spinlock, as spinlock widely used for list. Also changed if (obj->userfault_count) to GEM_BUG_ON(!obj->userfault_count). v2: - Removed lmem_userfault_{list,lock} from intel_gt. [Matt Auld] Fixes: ad74457a ("drm/i915/dgfx: Release mmap on rpm suspend") Suggested-by:Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by:
-
Anshuman Gupta authored
Runtime pm is not really per GT, therefore it make sense to move lmem_userfault_list, lmem_userfault_lock and userfault_wakeref from intel_gt to intel_runtime_pm structure, which is embedded to i915. No functional change. v2: - Fixes the code comment nit. [Matt Auld] Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221027092242.1476080-2-anshuman.gupta@intel.com
-
- 29 Oct, 2022 6 commits
-
-
Zhang Qilong authored
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. We fix it by replacing it with the newest pm_runtime_resume_and_get to keep usage counter balanced. Fixes: 34cc0aa2 ("drm/rockchip: Add support for Rockchip Soc LVDS") Fixes: cca1705c ("drm/rockchip: lvds: Add PX30 support") Signed-off-by:
Zhang Qilong <zhangqilong3@huawei.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220922132107.105419-3-zhangqilong3@huawei.com
-
Yuan Can authored
Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() to avoid device usage counter leak. Signed-off-by:
Yuan Can <yuancan@huawei.com> Signed-off-by:
-
Jiapeng Chong authored
The function dsi_update_bits() is defined in the dw-mipi-dsi-rockchip.c file, but not called elsewhere, so delete this unused function. drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c:367:20: warning: unused function 'dsi_update_bits'. https://bugzilla.openanolis.cn/show_bug.cgi?id=2414Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Sascha Hauer authored
Esmart0-win0 could serve as primary plane, so mark it as such. On RK3568 this window will never be used as primary plane, because the three windows at the beginning of the rk3568_vop_win_data[] array will be used. On RK3566 however, two of the windows at the beginning of the rk3568_vop_win_data[] array cannot not be used due to hardware limitations, so without this patch we end up with CRTCs without primary planes when multiple VPs are active. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Tested-by:
Chris Morgan <macromorgan@hotmail.com> Signed-off-by:
-
Johan Jonker authored
The function rockchip_drm_framebuffer_init() was in use in the rockchip_drm_fbdev.c file, but that is now replaced by a generic fbdev setup. Reduce the image size by removing the rockchip_drm_framebuffer_init() and sub function rockchip_fb_alloc() and cleanup the rockchip_drm_fb.h header file. Signed-off-by:
Johan Jonker <jbx6244@gmail.com> Reviewed-by:
John Keeping <john@metanate.com> Signed-off-by:
-
Matt Roper authored
The termination entries were missing for a couple of the recently-added MTL steering tables. Fixes: f32898c9 ("drm/i915/xelpg: Add multicast steering") Fixes: a7ec65fc ("drm/i915/xelpmp: Add multicast steering for media GT") Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221028224022.964997-1-matthew.d.roper@intel.com
-
- 28 Oct, 2022 6 commits
-
-
Ahmad Fatoum authored
adv7511 probe may need to be attempted multiple times before no -EPROBE_DEFER is returned. Currently, every such probe results in an error message: [ 4.534229] adv7511 1-003d: failed to find dsi host [ 4.580288] adv7511 1-003d: failed to find dsi host This is misleading, as there is no error and probe deferral is normal behavior. Fix this by using dev_err_probe that will suppress -EPROBE_DEFER errors. While at it, we touch all dev_err in the probe path. This makes the code more concise and included the error code everywhere to aid user in debugging. Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221026125246.3188260-1-a.fatoum@pengutronix.de
-
Ville Syrjälä authored
Correctly indicate which outputs we support in the debug print. Signed-off-by:
-
Ville Syrjälä authored
Avoid having to call the output init function for each output type separately. We can just call the right one based on the "class" of the output. Technically we could just walk the bits of the bitmask but that could change the order in which we initialize the outputs. To avoid any behavioural changes keep to the same explicit probe order as before. Signed-off-by:
-
Ville Syrjälä authored
Get rid of this silly output type<->device index back and forth and just pass the output type directly to the corresponding output init function. This was already being done for TV outputs anyway. Signed-off-by:
-
Ville Syrjälä authored
Stop enumerating the DDC modes for SDVO LVDS outputs (outside the initial fixed mode setup). intel_panel_mode_valid() will just reject most of them anyway, and any left over are entirely pointless as they'll match the fixed mode hdisp+vdisp+vrefresh so no user visible effect from using them instead of the fixed mode. Signed-off-by:
-
Ville Syrjälä authored
Get rid of this funny byte based dumping of invalid output flags and just dump it as a single hex numbers. Also do that early since all the rest is going to get skipped anyway of the thing is zero. Signed-off-by:
-
