- 30 Jan, 2023 10 commits
-
-
Kuninori Morimoto authored
Current renesas,rsnd is requesting #sound-dai-cells, but it is needed in case of it is using "simple-card", but not needed in case of "audio-graph". We will get below warning without this patch. This patch fiup it. ${LINUX}/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dtb: sound@ec500000: '#sound-dai-cells' is a required property From schema: ${LINUX}/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml Signed-off-by:Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87edrl7rf4.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Some SRC is not implemented on some SoC, thus interrupts/dmas/dma-names are not mandatory. This patch solve it. Without this patch we will get below error when 'make DT_CHECKER_FLAGS=-m dt_binding_check'. dtschema/dtc warnings/errors: ${LINUX}/Documentation/devicetree/bindings/sound/renesas,rsnd.example.dtb: \ sound@ec500000: Unevaluated properties are not allowed ('rcar_sound,src' was unexpected) From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml Link: https://lore.kernel.org/r/167344317928.394453.14105689826645262807.robh@kernel.orgReported-by:Rob Herring <robh@kernel.org> Signed-off-by:
-
Kuninori Morimoto authored
renesas,rsnd.yaml is possible to use ports/port/endpoint if it is using Audio Graph Card/Card2 for sound. The schema is defined under audio-graph-port.yaml. rsnd driver needs "playback/capture" property under endpoint, but it is not defined in audio-graph-port.yaml. This patch adds missing "playback/capture" properties under endpoint. Without this patch, we will get below warning ${LINUX}/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dtb: sound@ec500000: ports:port@0:endpoint: Unevaluated properties are not allowed ('playback', 'capture' were unexpected) From schema: ${LINUX}/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml Signed-off-by: -
Kuninori Morimoto authored
ak4613 is possible to use Of-graph (Audio-Graph-Card) style, but we need to indicate it. Otherwise we will get below warning. This patch add it. ${LINUX}/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dtb: codec@10: 'port' does not match any of the regexes: '^asahi-kasei,in[1-2]-single-end$', '^asahi-kasei,out[1-6]-single-end$', 'pinctrl-[0-9]+' From schema: ${LINUX}/Documentation/devicetree/bindings/sound/ak4613.yaml Signed-off-by: -
Geert Uytterhoeven authored
Convert the Texas Instruments PCM3168A Audio Codec Device Tree binding documentation to json-schema. Add missing properties. Drop unneeded pinctrl properties from example. Link: https://lore.kernel.org/r/cover.1669980383.git.geert+renesas@glider.be Link: https://lore.kernel.org/r/87mt7qpylw.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Kuninori Morimoto authored
Audio Graph port doesn't use prefix. This patch removes it. Signed-off-by:
-
Kuninori Morimoto authored
Audio Graph endpoint is possible to have clocks, and system-clock-xxx, but these are missing on audio-graph-port.yaml. These have been already defined on simple-card.yaml. This patch re-use these. We will get below warning without this patch. ${LINUX}/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dtb: audio-codec@44: ports:port@0:endpoint: Unevaluated properties are not allowed ('clocks' was unexpected) From schema: ${LINUX}/Documentation/devicetree/bindings/sound/ti,pcm3168a.yaml Link: https://lore.kernel.org/r/87pmcmpyml.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: -
Kuninori Morimoto authored
audio-graph-port is missing "mclk-fs" on ports/port, it is used not only endpoint. It is already defined on simple-card. This patch fixup it. Without this patch, we will get below warning. ${LINUX}/arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dtb: audio-codec@44: ports: 'mclk-fs' does not match any of the regexes: '^port@[0-9a-f]+$', 'pinctrl-[0-9]+' From schema: ${LINUX}/Documentation/devicetree/bindings/sound/ti,pcm3168a.yaml Signed-off-by: -
Kuninori Morimoto authored
Audio Graph user needs "ports" not only "port". This patch adds standard "ports" as definitions to use it easily. If user needs standard "ports", it can use ports: $ref: audio-graph-port.yaml#/definitions/ports If user want to use custom ports, it can re-use audio-graph-port.yaml#/definitions/port-base" audio-graph-port.yaml#/definitions/endpoint-base" Link: https://lore.kernel.org/r/87sfhipynv.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: -
Kuninori Morimoto authored
Audio Graph base driver might need to add its own properties. In such case, having definitions for port/endpoint is easy to handle it. This patch adds definitions for port/endpoint. Signed-off-by:
-
- 28 Jan, 2023 8 commits
-
-
Kuninori Morimoto authored
commit d3268a40 ("ASoC: soc-compress.c: fix NULL dereference") enables DPCM capture, but it should independent from playback. This patch fixup it. Fixes: d3268a40 ("ASoC: soc-compress.c: fix NULL dereference") Link: https://lore.kernel.org/r/87tu0i6j7j.wl-kuninori.morimoto.gx@renesas.comAcked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Kees Cook authored
Walking the dram->cs array was seen as accesses beyond the first array item by the compiler. Instead, use the array index directly. This allows for run-time bounds checking under CONFIG_UBSAN_BOUNDS as well. Seen with GCC 13 with -fstrict-flex-arrays: ../sound/soc/kirkwood/kirkwood-dma.c: In function 'kirkwood_dma_conf_mbus_windows.constprop': ../sound/soc/kirkwood/kirkwood-dma.c:90:24: warning: array subscript 0 is outside array bounds of 'const struct mbus_dram_window[0]' [-Warray-bounds=] 90 | if ((cs->base & 0xffff0000) < (dma & 0xffff0000)) { | ~~^~~~~~ Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org Signed-off-by:Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230127224128.never.410-kees@kernel.orgSigned-off-by:
-
Alexander Stein authored
This silences -517 errors and helps figuring out why the device probe is deferred. Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20230119073416.3064918-1-alexander.stein@ew.tq-group.comSigned-off-by:
-
Kiseok Jo authored
Signed-off-by:
Kiseok Jo <kiseok.jo@irondevice.com> Link: https://lore.kernel.org/r/20230126020156.3252-4-kiseok.jo@irondevice.comSigned-off-by:
-
KiseokJo authored
Signed-off-by:
-
Luca Ceresoli authored
This is never modified and can be made const. Signed-off-by:
Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://lore.kernel.org/r/20230126152412.959574-1-luca.ceresoli@bootlin.comSigned-off-by:
-
Mark Brown authored
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: The following series will enable multi-stream support for playback and capture streams. Currently only a single PCM can be connected to a DAI, with the multi-stream support it is possible to connect multiple PCMs to a single DAI. To achieve this we need to make sure that DAIs/AIF are only set up once since other stream could be connected to it later. We also need to introduce reference or use counting for widgets to make sure that they are not going to be destroyed while other streams are still using them. With the multi-stream support we also need to extend our current locking scheme which worked well for simple paths.
-
Mark Brown authored
Merge series from Astrid Rost <astrid.rost@axis.com>: Add a generic way to create jack inputs for auxiliary jack detection drivers (e.g. via i2c, spi), which are not part of any real codec. The simple-card can be used as combining card driver to add the jacks, no new one is required. Create a jack (for input-events) for jack devices in the auxiliary device list (aux_devs). A device which returns a valid value on get_jack_type counts as jack device; set_jack is required to add the jack to the device.
-
- 27 Jan, 2023 22 commits
-
-
Astrid Rost authored
Add set_jack and get_jack_type to allow simple-card-utils to add a jack for it. Signed-off-by:
Astrid Rost <astrid.rost@axis.com> Link: https://lore.kernel.org/r/20230123135913.2720991-4-astrid.rost@axis.comSigned-off-by:
-
Astrid Rost authored
Add a generic way to create jack inputs for auxiliary jack detection drivers (e.g. via i2c, spi), which are not part of any real codec. The simple-card can be used as combining card driver to add the jacks, no new one is required. Create a jack (for input-events) for jack devices in the auxiliary device list (aux_devs). A device which returns a valid value on get_jack_type counts as jack device; set_jack is required to add the jack to the device. Signed-off-by:
-
Astrid Rost authored
Add function to return the jack type of snd_jack_types. This allows a generic card driver to add a jack with the specified type. Signed-off-by:
-
Peter Ujfalusi authored
If the pipeline setup fails at the first widget/pipeline then we will have no spipe stored under the pipeline_list->pipelines, the pipeline_list->count is 0. If this is the case we would have a NULL pointer dereference if the execution is allowed to proceed. Check for this condition along with the pipeline_list->pipelines check Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20230127120031.10709-19-peter.ujfalusi@linux.intel.comSigned-off-by:
-
Peter Ujfalusi authored
The use_count of the swidget is protect by ALSA core PCM locking with the exception when an associated kcontrol is changed. It has been observed that a rightly timed kcontrol access during stream stop can result of an attempt to send a control update to a widget which has been freed up between the check of the use_count and the message sending. We need to protect the entire sof_widget_setup() and sof_widget_free() execution to make it safe to rely on the use_count. Move the code under an _unlocked() function and use a mutex to protect the execution of the functions for concurrency. On the control path we need to use the lock only for the kcontrol access, the widget_kcontrol_setup() op is called with the lock already held. Reported-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by:
-
Peter Ujfalusi authored
The sof_widget_free() on the error path will decrement the use count and if we jump to widget_free: then the use_count will be decremented by two, which is not correct as we only incremented once with 1. Signed-off-by:
-
Ranjani Sridharan authored
When starting/stopping multiple streams in parallel, pipeline triggers and pipeline frees can get interleaved. So use the same mutex used for pipeline trigger to protect the pipeline frees as well. Rename the trigger_mutex to pipeline_state_mutex for more clarity. Signed-off-by:
-
Ranjani Sridharan authored
Use the started_count and paused_count to implement reference counting when making decisions to start/stop/pause pipelines during the FE DAI trigger. This is necessary to trigger the shared pipelines in the FE DAI trigger properly. With IPC4, the FE trigger will issue multiple pipeline state changes, and the triggers are propagated downstream to connected pipelines by the SOF driver - not the firmware. This creates a window for race conditions where an FE trigger preempts another one, which results in inconsistent pipeline states and refcounts. This patch introduces a mutex lock for the pcm trigger that guarantees that IPC4 state and resources are accessed in a serialized manner. Signed-off-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
-
Ranjani Sridharan authored
For more clarity, rename the struct ipc4_pipeline_set_state_data variable to trigger_list instead of data. No functionality change. Signed-off-by:
-
Ranjani Sridharan authored
Introduce struct snd_sof_pipeline to save the information about pipelines including the pipeline widget, their status wrt how many PCM's are using them and whether they are complete or not. In struct snd_sof_widget, replace pipe_widget with spipe and remove complete. In struct snd_sof_pcm_stream_pipeline_list, replace pipe_widgets with pipelines. Update all users accordingly. Signed-off-by:
-
Ranjani Sridharan authored
Use the list of pipelines in the PCM stream's pipeline info to trigger the pipelines in the right order. Add a helper for triggering pipelines in batch mode that will be used to trigger multiple pipelines at the same time. Signed-off-by:
Libin Yang <libin.yang@intel.com> Reviewed-by:
-
Ranjani Sridharan authored
Populate the pipeline_info for the PCM stream with the list of pipeline widgets that need to be handled during the PCM trigger. This will be used in the IPC-specific PCM trigger op to trigger the pipelines. Signed-off-by:
-
Ranjani Sridharan authored
Add a new flag, skip_during_fe_trigger, to struct sof_ipc4_pipeline to skip triggering pipelines in the FE DAI trigger. Set this flag for the HDA DAI BE pipelines so that their BE pipeline will not be triggered in the FE DAI trigger. Also, move the trigger handling for all commands include START/PAUSE_RELEASE for the HDA DAI's to the backend DAI trigger ops. For the SSP/DMIC/SDW cases, remove the BE DAI trigger as they involve no DMA operations and can be triggered in the FE DAI trigger. This is in preparation to perform batch triggering of all pipelines for the non-HDA case. Signed-off-by:
-
Ranjani Sridharan authored
Define the pcm_setup/pcm_free ops for IPC4. Define a new struct snd_sof_pcm_stream_trigger_info and add a new field trigger_info of this type to struct snd_sof_pcm_stream. This will be used to save the list of pipelines that need to be triggered. Signed-off-by:
-
Ranjani Sridharan authored
These will be used to perform IPC-specific PCM setup/free. Signed-off-by:
-
Ranjani Sridharan authored
Add a new topology IPC op to set up DAI links and set the link trigger order to match the expectation based on the IPC type. Note that the link_setup op implementations for IPC3 and IPC4 are not identical and have contrasting trigger orders for playback and capture. Signed-off-by:
-
Ranjani Sridharan authored
IPC3 and IPC4 have different requirements for the order in which the FE CPU and BE CPU DAI trigger callbacks must be invoked. With a regular PCM start/stop, pipeline widgets are set up during hw_params and freed during hw_free. But when the system is suspended when a PCM is running, pipeline widgets are freed during the SUSPEND trigger callback for the FE CPU DAI. In order to avoid freeing the pipeline widgets before the BE CPU DAI trigger is executed, the trigger order was modified in previous contributions in the PCM dai_link_fixup callback to make sure that the BE CPU DAI trigger stop/suspend is always invoked before the FE CPU DAI trigger. But this contradicts the firmware requirement for IPC4 w.r.t. ordering of pipeline triggers. So, remove the freeing of pipeline widgets during FE CPU DAI suspend trigger and handle it during system suspend when the tear_down_all_pipelines() IPC op is invoked. This will be followed up with a patch to fix the trigger order for IPC4. Signed-off-by:
-
Ranjani Sridharan authored
When walking the list of the widgets from the source to the sink, we accidentally also end up preparing/setting up the widgets that are not in the list of connected DAPM widgets associated with the PCM. Avoid this by checking if a widget is part of the connected DAPM widget list during widget prepare, unprepare, setup or free. Signed-off-by:
-
Ranjani Sridharan authored
Calling the sof_widget_setup/free() for the DAI/AIF widgets inside the snd_soc_dapm_widget_for_each_sink_path() loop will end up setting up or freeing the widget multiple times if there are multiple paths leaving the widget. Fix this by moving the widget setup/free for the starting widget in each path outside the loop. Signed-off-by:
-
Ranjani Sridharan authored
Export the widget_in_list() function to be used by other modules. Signed-off-by:
-
Ranjani Sridharan authored
The FW currently ignores unbinding routes if the source and sink widgets belong to the same pipeline. So no need to send the IPC at all in the first place. Signed-off-by:
-
강신형 authored
If panic_on_warn is set and compress stream(DPCM) is started, then kernel panic occurred because card->pcm_mutex isn't held appropriately. In the following functions, warning were issued at this line "snd_soc_dpcm_mutex_assert_held". static int dpcm_be_connect(struct snd_soc_pcm_runtime *fe, struct snd_soc_pcm_runtime *be, int stream) { ... snd_soc_dpcm_mutex_assert_held(fe); ... } void dpcm_be_disconnect(struct snd_soc_pcm_runtime *fe, int stream) { ... snd_soc_dpcm_mutex_assert_held(fe); ... } void snd_soc_runtime_action(struct snd_soc_pcm_runtime *rtd, int stream, int action) { ... snd_soc_dpcm_mutex_assert_held(rtd); ... } int dpcm_dapm_stream_event(struct snd_soc_pcm_runtime *fe, int dir, int event) { ... snd_soc_dpcm_mutex_assert_held(fe); ... } These functions are called by soc_compr_set_params_fe, soc_compr_open_fe and soc_compr_free_fe without pcm_mutex locking. And this is call stack. [ 414.527841][ T2179] pc : dpcm_process_paths+0x5a4/0x750 [ 414.527848][ T2179] lr : dpcm_process_paths+0x37c/0x750 [ 414.527945][ T2179] Call trace: [ 414.527949][ T2179] dpcm_process_paths+0x5a4/0x750 [ 414.527955][ T2179] soc_compr_open_fe+0xb0/0x2cc [ 414.527972][ T2179] snd_compr_open+0x180/0x248 [ 414.527981][ T2179] snd_open+0x15c/0x194 [ 414.528003][ T2179] chrdev_open+0x1b0/0x220 [ 414.528023][ T2179] do_dentry_open+0x30c/0x594 [ 414.528045][ T2179] vfs_open+0x34/0x44 [ 414.528053][ T2179] path_openat+0x914/0xb08 [ 414.528062][ T2179] do_filp_open+0xc0/0x170 [ 414.528068][ T2179] do_sys_openat2+0x94/0x18c [ 414.528076][ T2179] __arm64_sys_openat+0x78/0xa4 [ 414.528084][ T2179] invoke_syscall+0x48/0x10c [ 414.528094][ T2179] el0_svc_common+0xbc/0x104 [ 414.528099][ T2179] do_el0_svc+0x34/0xd8 [ 414.528103][ T2179] el0_svc+0x34/0xc4 [ 414.528125][ T2179] el0t_64_sync_handler+0x8c/0xfc [ 414.528133][ T2179] el0t_64_sync+0x1a0/0x1a4 [ 414.528142][ T2179] Kernel panic - not syncing: panic_on_warn set ... So, I reposition and add pcm_mutex to resolve lockdep error. Signed-off-by:Shinhyung Kang <s47.kang@samsung.com> Link: https://lore.kernel.org/r/016401d90ac4$7b6848c0$7238da40$@samsung.comSigned-off-by:
-
