They are obsolted by the i2c-parport.c driver.

into kroah.com:/home/greg/linux/BK/i2c-2.6

The following patch against kernel 2.6.4-mm1 adds the ds1621 driver (an
I2C sensor). I have ported it from the 2.4 version.

It has been reviewed by Jean Delvare, partly on IRC, and it is
"compliant" with Mark Hoffman's refactoring.

This patch makes the w83781d driver preserve fan_min settings when the
user changes fan_divs. This isn't done "by default" because the actual
fan min value (in RPMs) depends on both the fan_min register and the
fan_div register. Only two drivers handle it properly at the moment as
far as I know (lm78 and asb100). Several other drivers would need to be
fixed the same way, but well, once at a time ;)

Tested on my AS99127F rev.1.

Credits go to Philip Pokorny, since I think I remember he is the one who
introduced the method in the lm78 driver in the first place.

This tends to increase the size of the three set_store_regs_fan_div
functions, and I am considering refactoring them at some point. Later
though.

A number of chip drivers in 2.6.4-mm1 try to handle an error case that
cannot happen when setting the chip name. The following patch changes
that.

Affected drivers: adm1021, it87, lm75, lm78, lm85, w83627hf, w83781d.

Note that in any case, the worst that could happen (but then again, it
cannot happen) is that the chip name would be set to an empty string,
which doesn't hurt much.

The patch also cleans up a few things in it87, w83627hf and w83781d,
which are tightly related to the rest of the changes and necessary for
them to be safe.

it87: There is only really one "kind" in this driver, so I removed all
references to other kinds.

w83627hf: The driver did not handle unknown chips.

w83781d: The user shouldn't be allowed to force a kind that doesn't
match the chip's bus type (I2C or ISA). The code was not meant to handle
that case, although no check was done so far.

Tested on my AS99127F, works as intended.

I just noticed that I am doing something wrong in the i2c chip drivers I
ported to Linux 2.6. If these drivers are forced to a specific chip type
("kind" as we call it internally), then the device doesn't have its name
set (and defaults to an empty string).

Affected drivers: gl518sm, lm83, lm90, w83l785ts.

I could verify the problem on my ADM1032 chip (lm90 driver). I also
verified that the proposed patch fixes the issue.

You may notice that I fix the problem differently for gl518sm and
w83l785ts on the one hand, and lm83 and lm90 on the other hand. This is
because the first two drivers are not expected to support more a single
chip in the future, while lm90 already does and lm83 could someday (for
example, support for the LM82 could be added on request).

into ppc970.osdl.org:/home/torvalds/v2.5/linux

into ppc970.osdl.org:/home/torvalds/v2.5/linux

au88x0 driver
Fixed gameport dependency and solid kernel build

au88x0 driver
Make mchannels and rampchs static

Intel8x0 driver
add Intel ICH6 and ESB

au88x0 driver
fix compilation on gcc 2.95.x

Documentation,MPU401 UART
integrate MPU-401 ACPI PnP from alsa-driver

AC97 Codec Core
Kevin Mack <kevmack@accesscomm.ca>
Here's a quick and dirty patch that's given me basic sound from
my Gateway M675 notebook (Sigmatel 9758 AC97 codec).

Intel8x0 driver
Added slot definitions for s/pdif pcm - ICH4

- fix gcc-3.4.0 warnings

- add asm/dma-mapping.h
- add CONFIG_PCI

 - merge common routine
 - runtime vector setup update

into ppc970.osdl.org:/home/torvalds/v2.5/linux

into ppc970.osdl.org:/home/torvalds/v2.5/linux

From: "Randy.Dunlap" <rddunlap@osdl.org>
From: Luiz Fernando Capitulino <lcapitulino@prefeitura.sp.gov.br>

The missing __init was found by reference_init26.pl.

From: Frederik Deweerdt <frederik.deweerdt@laposte.net>

They are identical to non _HOB versions (except IDE_CONTROL_OFFSET_HOB).

Set ide_task_t fields (command_type, handler and prehandler) directly.
Remove unused ide_task_t->posthandler and all ide_cmd_type_parser() logic.

ide_cmd_type_parser() was meant to be used for ioctls but
ended up checking validity of kernel generated requests (doh!).

Rationale for removal:
- it can't be used for existing ioctls (changes the way they work)
- kernel shouldn't check validity of (root only) user-space requests
  (it can and should be done in user-space)
- it wastes CPU cycles on going through parsers
- it makes code harder to understand/follow
  (now info about request is localized)

Many thanks to Promise for their support.
Expect more updates/fixes for Promise PATA support soon.

- fix PIO (auto-)tuning - use pdcnew_new_tune_chipset()
  and always tune PIO mode even if (U)DMA is used
- cleanup cable verification code a bit
- remove leftovers from driver split-up
- remove duplicate DISPLAY_PDC202XX_TIMINGS define

into redhat.com:/spare/repo/libata-2.5

The original submittor of the quirk code noted that the errata
of a lockup creating when the condition "sector % 15 == 1" is
true only on chip revisions <= 1.  This is limitation on chip
revision is apparently not correct, therefore we apply to all
affected drives in the quirk list.

This is a sledgehammer fix, limiting max-sectors to 15.  A much better
fix would split the hardware request into two taskfiles, issuing
an additional command, thereby avoiding "sectors % 15 == 1"

Given the errata is limited to "sil 311x + <these drives>", it is hoped
that some janitor cares enough to do a real fix.

into nuts.davemloft.net:/disk1/BK/sparc-2.6

into nuts.davemloft.net:/disk1/BK/net-2.6

into foobazco.org:/sources/2.5-sparc-todave