An error occurred fetching the project authors.
- 23 Mar, 2006 40 commits
-
-
Rafael J. Wysocki authored
Move the swap-writing/reading code of swsusp to a separate file. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Rafael J. Wysocki authored
Introduce the low level interface that can be used for handling the snapshot of the system memory by the in-kernel swap-writing/reading code of swsusp and the userland interface code (to be introduced shortly). Also change the way in which swsusp records the allocated swap pages and, consequently, simplifies the in-kernel swap-writing/reading code (this is necessary for the userland interface too). To this end, it introduces two helper functions in mm/swapfile.c, so that the swsusp code does not refer directly to the swap internals. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
This was a temporary thing for 2.6.16. Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Ashok Raj authored
Don't create "online" control file for BSP (i386/x86_64) since its not removable. We originally added this to support ppc64 if the kernel has support but BIOS indicated no offline support, we just didnt create online files for them. We used the same method in ia64 as well, if we have a cpu taking platform interrupts but cannot be removed if those interrupts cannot be re-targeted to another cpu. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Markus Gutschke authored
Gcc reserves %ebx when compiling position-independent-code on i386. This means, the _syscallX() macros in include/asm-i386/unistd.h will not compile. This patch is changes the existing macros to take special care to preserve %ebx. The bug can be tracked at http://bugzilla.kernel.org/show_bug.cgi?id=6204Signed-off-by: Markus Gutschke <markus@google.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Adrian Bunk authored
You must always ensure to fulfill the dependencies of what you are select'ing. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Martin Bligh <mbligh@google.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Chuck Ebbert authored
_raw_spin_lock_flags() is entered with interrupts disabled. If it cannot obtain a spinlock, it checks the flags that were passed and re-enables interrupts before spinning if that's how the flags are set. When the spinlock might be available, it disables interrupts (even if they are already disabled) before trying to get the lock. Change that so interrupts are only disabled if they have been enabled. This costs nine bytes of duplicated spinloop code. Fastpath before patch: jle <keep looping> not-taken conditional jump cli disable interrupts jmp <try for lock> unconditional jump Fastpath after patch, if interrupts were not enabled: jg <try for lock> taken conditional branch Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Shaohua Li authored
Checking APIC version instead of CPU family to determine XAPIC. Family 6 CPU could have xapic as well. Signed-off-by: Shaohua Li<shaohua.li@intel.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: "Seth, Rohit" <rohit.seth@intel.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Shaohua Li authored
Detecting cache line using cpuid.4, cpuid level 4 is enough. Signed-off-by: Shaohua Li<shaohua.li@intel.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: "Seth, Rohit" <rohit.seth@intel.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Chuck Ebbert authored
i386 has a small bug in the stack dump code where it prints an extra log level code. Remove that and fix the alignment of normal stack dump printout. Also remove some unnecessary printk() calls. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jan Beulich authored
With cpu_gdt_descr having been converted to per-CPU data, the old object (in head.S) no longer needs to reserve space for each CPU's instance. With cpu_gdt_table not being used for CPU 0 anymore, it doesn't seem to need page alignment (or if in fact there is a need for it to retain that alignment, the whole object should go into .data.page_align). Signed-off-by: Jan Beulich <jbeulich@novell.com> Acked-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jesper Juhl authored
arch/i386/kernel/cpu/centaur.c: In function `centaur_mcr_insert': arch/i386/kernel/cpu/centaur.c:33: warning: implicit declaration of function `mtrr_centaur_report_mcr' Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jesper Juhl authored
arch/i386/kernel/apic.c:840: warning: implicit declaration of function `GET_APIC_ID' Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Chuck Ebbert authored
Document a limitation of vsyscall-sysenter, since patches to fix it have been rejected. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Chuck Ebbert authored
Using PTRACE_SINGLESTEP on a child that does an int80 syscall misses the SIGTRAP that should be delivered upon syscall exit. Fix that by setting TIF_SINGLESTEP when entering the kernel via int80 with TF set. /* Test whether singlestep through an int80 syscall works. */ #define _GNU_SOURCE #include <stdio.h> #include <unistd.h> #include <fcntl.h> #include <sys/ptrace.h> #include <sys/wait.h> #include <sys/mman.h> #include <asm/user.h> static int child, status; static struct user_regs_struct regs; static void do_child() { ptrace(PTRACE_TRACEME, 0, 0, 0); kill(getpid(), SIGUSR1); asm ("int $0x80" : : "a" (20)); /* getpid */ } static void do_parent() { unsigned long eip, expected = 0; again: waitpid(child, &status, 0); if (WIFEXITED(status) || WIFSIGNALED(status)) return; if (WIFSTOPPED(status)) { ptrace(PTRACE_GETREGS, child, 0, ®s); eip = regs.eip; if (expected) fprintf(stderr, "child stop @ %08x, expected %08x %s\n", eip, expected, eip == expected ? "" : " <== ERROR"); if (*(unsigned short *)eip == 0x80cd) { fprintf(stderr, "int 0x80 at %08x\n", (unsigned int)eip); expected = eip + 2; } else expected = 0; ptrace(PTRACE_SINGLESTEP, child, NULL, NULL); } goto again; } int main(int argc, char * const argv[]) { child = fork(); if (child) do_parent(); else do_child(); return 0; } Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jan Beulich authored
>commit 76381fee >Author: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk> >Date: Thu Jun 23 00:08:46 2005 -0700 > > [PATCH] xen: x86_64: use more usermode macro > > Make use of the user_mode macro where it's possible. This is useful for Xen > because it will need only to redefine only the macro to a hypervisor call. I am of the opinion that the above changeset is incomplete, i.e. it missed converting some previous uses of user_mode to user_mode_vm. While most of them could be considered just cosmetical, at least the one in die_nmi doesn't appear to be. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk> Cc: Zachary Amsden <zach@vmware.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jan Beulich authored
Registering a callback handler through register_die_notifier() is obviously primarily intended for use by modules. However, the way these currently get called it is basically impossible for them to actually be used by modules, as there is, on non-PAE configurationes, a good chance (the larger the module, the better) for the system to crash as a result. This is because the callback gets invoked (a) in the page fault path before the top level page table propagation gets carried out (hence a fault to propagate the top level page table entry/entries mapping to module's code/data would nest infinitly) and (b) in the NMI path, where nested faults must absolutely not happen, since otherwise the IRET from the nested fault re-enables NMIs, potentially resulting in nested NMI occurences. Besides the modular aspect, similar problems would even arise for in- kernel consumers of the API if they touched ioremap()ed or vmalloc()ed memory inside their handlers. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Stas Sergeev authored
Register the boot-cpu in the cpu maps earlier to allow the early printk to work, and to fix an obscure deadlock at boot. Signed-off-by: Stas Sergeev <stsp@aknet.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
Expand out these fairly pointless macros. Cc: Chuck Ebbert <76306.1226@compuserve.com> Cc: Stas Sergeev <stsp@aknet.ru> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Chuck Ebbert authored
Use boot info to start early_printk() at the current row on VGA console, as left by the boot loader. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Cc: Stas Sergeev <stsp@aknet.ru> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Stas Sergeev authored
The history is that -mm kernels do not work for me for a few months already. The things started from crashing somewhere after starting init, and for the last month - no boot at all, just "Uncompressing... OK, booting kernel", and silence. Early console didn't work too. With the latest releases this degraded into an infinite stream of the "Unknown interrupt or fault" messages. So today my patience ran out and I started to think how can I collect at least some info for the bug-report. Attached is the patch that allows to gather some valueable debug info on the problem by making an early console more useable. I can't properly test the patch, as the kernel still doesn't boot, so I'll explain it in details in a hope someone else can justify the intrusive changes. arch_hooks.h: added prototypes for setup_early_printk() and early_printk(). setup.c: killed wrong setup_early_printk() prototype. Moved setup_early_printk() a bit earlier, as it was not "early enough" to cover the bug I was fighting with. early_printk.c: made it to start printing from the bottom of the screen, otherwise the messages interfere with the ones of the boot-loader, so you can't read them. Signed-off-by: Stas Sergeev <stsp@aknet.ru> Cc: Andi Kleen <ak@muc.de> Cc: Zwane Mwaikambo <zwane@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Chuck Ebbert authored
Allow signal handlers to set the RF bit in EFLAGS. This lets a simple debugger using SIGTRAP skip one instruction after returning from a signal. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Chuck Ebbert authored
There's no good reason for allowing ptrace to set the NT bit in EFLAGS, so mask it off. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jean Delvare authored
Merge a few printk calls in i386 traps. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Chris Wright authored
mp_bus_id_to_pci_bus is declared identically twice. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Natalie.Protasevich@unisys.com authored
ES7000 platform code clean up for compilation errors and a warning. Ifdef'd the ACPI related parts in the ES7000 platform code. They were causing compile errors in certain configuration (without ACPI defined). I think this approach would be best (as opposed to Kconfig changes) since it only touches the subarch... Signed-off-by: <Natalie.Protasevich@unisys.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Chuck Ebbert authored
When vendor-specific i386 initialization code is unavailable the kernel falls back to a default CPU model name. Make that model name reflect the CPU family instead of an internal vendor index. Tested on Pentium II (family 6 model 5). /proc/cpuinfo before: model name : ff/05 after: model name : 06/05 Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Acked-by: "Seth, Rohit" <rohit.seth@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Eric W. Biederman authored
In some code I am developing I had occasion to change the type of a variable. This made the value put_user was putting to user space wrong. But the code continued to build cleanly without errors. Introducing a temporary fixes this problem and at least with gcc-3.3.5 does not cause gcc any problems with optimizing out the temporary. gcc-4.x using SSA internally ought to be even better at optimizing out temporaries, so I don't expect a temporary to become a problem. Especially because in all correct cases the types on both sides of the assignment to the temporary are the same. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Chuck Ebbert authored
Allow the x86 "sep" feature to be disabled at bootup. This forces use of the int80 vsyscall. Mainly for testing or benchmarking the int80 vsyscall code. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Chuck Ebbert authored
Several places in arch/i386/kernel/cpu and kernel/cpu were using __devinit when they should have been __cpuinit. Fixing that saves ~4K when CONFIG_HOTPLUG && !CONFIG_HOTPLUG_CPU. Noticed by Andrew Morton. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Gerd Hoffmann authored
Implement SMP alternatives, i.e. switching at runtime between different code versions for UP and SMP. The code can patch both SMP->UP and UP->SMP. The UP->SMP case is useful for CPU hotplug. With CONFIG_CPU_HOTPLUG enabled the code switches to UP at boot time and when the number of CPUs goes down to 1, and switches to SMP when the number of CPUs goes up to 2. Without CONFIG_CPU_HOTPLUG or on non-SMP-capable systems the code is patched once at boot time (if needed) and the tables are released afterwards. The changes in detail: * The current alternatives bits are moved to a separate file, the SMP alternatives code is added there. * The patch adds some new elf sections to the kernel: .smp_altinstructions like .altinstructions, also contains a list of alt_instr structs. .smp_altinstr_replacement like .altinstr_replacement, but also has some space to save original instruction before replaving it. .smp_locks list of pointers to lock prefixes which can be nop'ed out on UP. The first two are used to replace more complex instruction sequences such as spinlocks and semaphores. It would be possible to deal with the lock prefixes with that as well, but by handling them as special case the table sizes become much smaller. * The sections are page-aligned and padded up to page size, so they can be free if they are not needed. * Splitted the code to release init pages to a separate function and use it to release the elf sections if they are unused. Signed-off-by: Gerd Hoffmann <kraxel@suse.de> Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Chuck Ebbert authored
Print stack backtraces in multiple columns, saving screen space. Number of columns is configurable and defaults to one so behavior is backwards-compatible. Also removes the brackets around addresses when printing more that one entry per line so they print as: <address> instead of: [<address>] This helps multiple entries fit better on one line. Original idea by Dave Jones, taken from x86_64. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Ingo Molnar authored
Make CONFIG_REGPARM enabled by default. It's a noticable win both for size and for performance, and gcc[34] handles it correctly. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Adrian Bunk authored
REGPARM has already gotten much testing, what about removing the dependency on EXPERIMENTAL? Additionally, this patch does: - remove the useless "default n" - remove note regarding binary only modules (nowadays, there are even some binary only modules compiled with REGPARM=y available) Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Davi Arnaut authored
This patch address several issues in the current BSD Secure Levels code: o plaintext_to_sha1: Missing check for a NULL return from __get_free_page o passwd_write_file: A page is leaked if the password is wrong. o fix securityfs registration order o seclvl_init is a mess and can't properly tolerate failures, failure path is upside down (deldif and delf should be switched) Cleanups: o plaintext_to_sha1: Use buffers passed in o passwd_write_file: Use kmalloc() instead of get_zeroed_page() o passwd_write_file: hashedPassword comparison is just memcmp o s/ENOSYS/EINVAL/ o misc (akpm: after some discussion it appears that the BSD secure levels feature should be scheduled for removal. But for now, let's fix these problems up). Signed-off-by: Davi Arnaut <davi.arnaut@gmail.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Stephen Smalley <sds@epoch.ncsc.mil> Cc: James Morris <jmorris@namei.org> Cc: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Patrick McHardy authored
free_hba() sets hba[i] to NULL, the dereference afterwards results in this crash. Setting busy_initializing to 0 actually looks unnecessary, but I'm not entirely sure, which is why I left it in. cciss: controller appears to be disabled Unable to handle kernel NULL pointer dereference at virtual address 00000370 printing eip: c1114d53 *pde = 00000000 Oops: 0002 [#1] Modules linked in: CPU: 0 EIP: 0060:[<c1114d53>] Not tainted VLI EFLAGS: 00010286 (2.6.16 #1) EIP is at cciss_init_one+0x4e9/0x4fe eax: 00000000 ebx: c132cd60 ecx: c13154e4 edx: c27d3c00 esi: 00000000 edi: c2748800 ebp: c2536ee4 esp: c2536eb8 ds: 007b es: 007b ss: 0068 Process swapper (pid: 1, threadinfo=c2536000 task=c2535a30) Stack: <0>00000000 00000000 00000000 c13fdba0 c2536ee8 c13159c0 c2536f38 f7c74740 c132cd60 c132cd60 ffffffed c2536ef0 c10c1d51 c2748800 c2536f04 c10c1d85 c132cd60 c2748800 c132cd8c c2536f14 c10c1db8 c2748848 00000000 c2536f28 Call Trace: [<c10031d5>] show_stack_log_lvl+0xa8/0xb0 [<c1003305>] show_registers+0x102/0x16a [<c10034a2>] die+0xc1/0x13c [<c1288160>] do_page_fault+0x38a/0x525 [<c1002e9b>] error_code+0x4f/0x54 [<c10c1d51>] pci_call_probe+0xd/0x10 [<c10c1d85>] __pci_device_probe+0x31/0x43 [<c10c1db8>] pci_device_probe+0x21/0x34 [<c110a654>] driver_probe_device+0x44/0x99 [<c110a73f>] __driver_attach+0x39/0x5d [<c1109e1c>] bus_for_each_dev+0x35/0x5a [<c110a777>] driver_attach+0x14/0x16 [<c110a220>] bus_add_driver+0x5c/0x8f [<c110ab22>] driver_register+0x73/0x78 [<c10c1f6d>] __pci_register_driver+0x5f/0x71 [<c13bf935>] cciss_init+0x1a/0x1c [<c13aa718>] do_initcalls+0x4c/0x96 [<c13aa77e>] do_basic_setup+0x1c/0x1e [<c10002b1>] init+0x35/0x118 [<c1000cf5>] kernel_thread_helper+0x5/0xb Code: 04 b5 e0 de 40 c1 8d 50 04 8b 40 34 e8 3f b7 f9 ff 8b 04 b5 e0 de 40 c1 e8 aa f3 ff ff 89 f0 e8 e8 fa ff ff 8b 04 b5 e0 de 40 c1 <c7> 80 70 03 00 00 00 00 00 00 83 c8 ff 8d 65 f4 5b 5e 5f 5d c3 <0>Kernel panic - not syncing: Attempted to kill init! Signed-off-by: Patrick McHardy <kaber@trash.net> Cc: <mike.miller@hp.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
NeilBrown authored
Both R1BIO_Barrier and R1BIO_Returned are 4 !!!! This means that barrier requests don't get returned (i.e. b_endio called) because it looks like they already have been. Signed-off-by: Neil Brown <neilb@suse.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Anton Blanchard authored
We have noticed lockups during boot when stress testing kexec on ppc64. Two cpus would deadlock in scheduler code trying to grab already taken spinlocks. The double_rq_lock code uses the address of the runqueue to order the taking of multiple locks. This address is a per cpu variable: if (rq1 < rq2) { spin_lock(&rq1->lock); spin_lock(&rq2->lock); } else { spin_lock(&rq2->lock); spin_lock(&rq1->lock); } On the other hand, the code in wake_sleeping_dependent uses the cpu id order to grab locks: for_each_cpu_mask(i, sibling_map) spin_lock(&cpu_rq(i)->lock); This means we rely on the address of per cpu data increasing as cpu ids increase. While this will be true for the generic percpu implementation it may not be true for arch specific implementations. One way to solve this is to always take runqueues in cpu id order. To do this we add a cpu variable to the runqueue and check it in the double runqueue locking functions. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Neil Horman authored
Fix a duplicate block device line printed after the "Block device" header in /proc/devices. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Nick Piggin authored
Merge clash will have broken sparc64. Synch up its online_page implementation with powerpc, which was identical until the set_page_count removal. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-