flag in interrupt handler.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>

       cause floods of events when devices don't honor the set_idle()
       call or report noise on absolute values, until a solution for
       this is found.
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>

       controller.
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>

       This now should work with almost any BIOS and kernel config
       combination.
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>

       Some non-dualpoint devices need passthrough enabled.
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>

       EVIOCSKEYCODE macros to be <= KEY_MAX. Check off-by one mistakes
       in keycodemax usage. There was a lot of potential for overwriting
       memory. Also enlarge NR_KEYS to 256 while we're at it.
Found-by: Georgi Guninski <guninski@guninski.com>
Initial-patch-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>

       protocol variant to enhance robustness.
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>

       tells us if it is enabled, if is PnP enabled, and if is
       ACPIPnP enabled. It will still lie to us, but it won't be
       too bad.
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>

       i8042.noacpi -> i8042.nopnp change.
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>

       register address. If the address is in the standard range,
       and a non-standard number is reported, we ignore it and use
       the default.
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>

       match the naming convention in hid-input

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> 

       repair force feedback effect erase routine that could
       never have worked.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>

       Bug introduced in last serio update.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>

       serio drivers (serio:tyNprNidNexN).
       Move serio_device_id from serio.h to mod_devicetable.h
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>

       separate touchpoint/passthrough into its own input device.
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>

       wheel support, and enable both by default.
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>

into pobox.com:/garz/repo/net-drivers-2.6

Factor out some code
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

IRQ races during change of mtu
- NAPI poll must be enabled prior to IRQ activation or the IRQ handler
  will not know what to do with an incoming packet;
- rtl8169_down() needs to try twice to sync with the IRQ handler when
  it is not issued under !netif_running() protection.

Both changes make it safe to request a change of mtu on a live device.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Some futex functions do get_user calls while holding mmap_sem for
reading.  If get_user() faults, and another thread happens to be in mmap
(or somewhere else holding waiting on down_write for the same
semaphore), then do_page_fault will deadlock.  Most architectures seem
to be exposed to this.

To avoid it, make sure the page is available.  If not, release the
semaphore, fault it in and retry.

I also found another exposure by inspection, moving some of the code
around avoids the possible deadlock there.
Signed-off-by: Olof Johansson <olof@austin.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Advanced SATA drivers should not (and cannot) use the basic
PCI IDE hooks for checking the Status and Error registers, as these
registers are either in non-standard locations, or simply don't
exist.

In the error handling path, libata was unconditionally calling some
PCI IDE hardware bitbanging functions, which would cause an oops
in the AHCI driver and any other advanced libata driver.

Not that anybody cares about the sign, but the signed type does
the wrong thing for right shifts. Which we had.

Fix a dm-raid1 deadlock: nested spinlocks with _irq.
Signed-Off-By: Alasdair G Kergon <agk@redhat.com>
From: Tim Burgess <tim.burgess@anu.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

It feels like 2.6.11 is right around the corner.  I would like to disable
ALPS suport for some devices we don't know how to handle properly yet to
cut down on number of complaints that we broke mouse support.

Input: ALPS - do not activate native mode for devices whose data
       we can not handle yet.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

A patch that I sent in earlier to allow the use of the data address
breakpoint on machines with a hypervisor happened to break things for those
configs, such as for the Maple board, where we don't compile in the
routines for calling the hypervisor.  This patch fixes it.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Reworking the ppc32 mm helps me find interesting bugs in the existing bug,
well, brown paper bag for me, I made this one a while ago.

The routine flush_hash_one_pte() used by ptep_test_and_clear_young()
wasn't properly recaclulating the vaddr from the pte pointer &
page->index.  The result is that we probably never flushed things from
the hash, so that's at least the _second_ bug affecting
ptep_test_and_clear_young(), swap on ppc32 must have been really broken
:(

This fixes it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into pobox.com:/garz/repo/libata-2.6

Uniformize comments
Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Removal of unused #define
Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Nail an overrun in skb alignment and remove the relevant magic variable.
Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Fix rx skb allocation error logging

Signed arithmetic is not required as rtl8169_rx_fill() return belongs
to the [0; NUM_RX_DESC] interval.
Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

into pobox.com:/garz/repo/netdev-2.6/r8169

Duh... GETLK returns F_UNLCK if and only if the lock could be placed.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>