- 11 Feb, 2019 5 commits
-
-
Ilan Peer authored
When mac80211 requests the low level driver to stop an ongoing Tx aggregation, the low level driver is expected to call ieee80211_stop_tx_ba_cb_irqsafe() to indicate that it is ready to stop the session. The callback in turn schedules a worker to complete the session tear down, which in turn also handles the relevant state for the intermediate Tx queue. However, as this flow in asynchronous, the intermediate queue should be stopped and not continue servicing frames, as in such a case frames that are dequeued would be marked as part of an aggregation, although the aggregation is already been stopped. Fix this by stopping the intermediate Tx queue, before calling the low level driver to stop the Tx aggregation. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
It's possible that the caller of cfg80211_classify8021d() uses the value to index an array, like mac80211 in ieee80211_downgrade_queue(). Prevent speculation on the return value. Signed-off-by:
-
Johannes Berg authored
Without recording the netlink port ID, we cannot return the results or complete messages to userspace, nor will we be able to abort if the socket is closed, so clearly we need to fill the value. Signed-off-by:
-
Aviya Erenfeld authored
Fix FTM per burst maximum value from 15 to 31 (The maximal bits that represents that number in the frame is 5 hence a maximal value of 31) Signed-off-by:
Aviya Erenfeld <aviya.erenfeld@intel.com> Signed-off-by:
-
Johannes Berg authored
If a driver does any significant activity in its ibss_join method, then it will very well expect that to be called during restart, before any stations are added. Do that. Signed-off-by:
-
- 06 Feb, 2019 2 commits
-
-
Johannes Berg authored
When we destroy the interface we already hold the wdev->mtx while calling cfg80211_pmsr_wdev_down(), which assumes this isn't true and flushes the worker that takes the lock, thus leading to a deadlock. Fix this by refactoring the worker and calling its code in cfg80211_pmsr_wdev_down() directly. We still need to flush the work later to make sure it's not still running and will crash, but it will not do anything. Fixes: 9bb7e0f2 ("cfg80211: add peer measurement with FTM initiator API") Signed-off-by:
-
Johannes Berg authored
When we *don't* have a MAC address attribute, we shouldn't try to use this - this was intended to copy the local MAC address instead, so fix it. Fixes: 9bb7e0f2 ("cfg80211: add peer measurement with FTM initiator API") Signed-off-by:
-
- 05 Feb, 2019 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Use CONFIG_NF_TABLES_INET from seltests, not NF_TABLES_INET. From Naresh Kamboju. 2) Add a test to cover masquerading and redirect case, from Florian Westphal. 3) Two packets coming from the same socket may race to set up NAT, ending up with different tuples and the packet losing race being dropped. Update nf_conntrack_tuple_taken() to exercise clash resolution for this case. From Martynas Pumputis and Florian Westphal. 4) Unbind anonymous sets from the commit and abort path, this fixes a splat due to double set list removal/release in case that the transaction needs to be aborted. 5) Do not preserve original output interface for packets that are redirected in the output chain when ip6_route_me_harder() is called. Otherwise packets end up going not going to the loopback device. From Eli Cooper. 6) Fix bogus splat in nft_compat with CONFIG_REFCOUNT_FULL=y, this also simplifies the existing logic to deal with the list insertions of the xtables extensions. From Florian Westphal. Diffstat look rather larger than usual because of the new selftest, but Florian and I consider that having tests soon into the tree is good to improve coverage. If there's a different policy in this regard, please, let me know. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
When I moved the refcount to refcount_t type I missed the fact that refcount_inc() will result in use-after-free warning with CONFIG_REFCOUNT_FULL=y builds. The correct fix would be to init the reference count to 1 at allocation time, but, unfortunately we cannot do this, as we can't undo that in case something else fails later in the batch. So only solution I see is to special-case the 'new entry' condition and replace refcount_inc() with a "delayed" refcount_set(1) in this case, as done here. The .activate callback can be removed to simplify things, we only need to make sure that deactivate() decrements/unlinks the entry from the list at end of transaction phase (commit or abort). Fixes: 12c44aba ("netfilter: nft_compat: use refcnt_t type for nft_xt reference count") Reported-by:
Jordan Glover <Golden_Miller83@protonmail.ch> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Eli Cooper authored
Commit 508b0904 ("netfilter: ipv6: Preserve link scope traffic original oif") made ip6_route_me_harder() keep the original oif for link-local and multicast packets. However, it also affected packets for the loopback address because it used rt6_need_strict(). REDIRECT rules in the OUTPUT chain rewrite the destination to loopback address; thus its oif should not be preserved. This commit fixes the bug that redirected local packets are being dropped. Actually the packet was not exactly dropped; Instead it was sent out to the original oif rather than lo. When a packet with daddr ::1 is sent to the router, it is effectively dropped. Fixes: 508b0904 ("netfilter: ipv6: Preserve link scope traffic original oif") Signed-off-by:
Eli Cooper <elicooper@gmx.com> Signed-off-by:
-
Marc Zyngier authored
Creating a macvtap on a DSA-backed interface results in the following splat when lockdep is enabled: [ 19.638080] IPv6: ADDRCONF(NETDEV_CHANGE): lan0: link becomes ready [ 23.041198] device lan0 entered promiscuous mode [ 23.043445] device eth0 entered promiscuous mode [ 23.049255] [ 23.049557] ============================================ [ 23.055021] WARNING: possible recursive locking detected [ 23.060490] 5.0.0-rc3-00013-g56c857a1b8d3 #118 Not tainted [ 23.066132] -------------------------------------------- [ 23.071598] ip/2861 is trying to acquire lock: [ 23.076171] 00000000f61990cb (_xmit_ETHER){+...}, at: dev_set_rx_mode+0x1c/0x38 [ 23.083693] [ 23.083693] but task is already holding lock: [ 23.089696] 00000000ecf0c3b4 (_xmit_ETHER){+...}, at: dev_uc_add+0x24/0x70 [ 23.096774] [ 23.096774] other info that might help us debug this: [ 23.103494] Possible unsafe locking scenario: [ 23.103494] [ 23.109584] CPU0 [ 23.112093] ---- [ 23.114601] lock(_xmit_ETHER); [ 23.117917] lock(_xmit_ETHER); [ 23.121233] [ 23.121233] *** DEADLOCK *** [ 23.121233] [ 23.127325] May be due to missing lock nesting notation [ 23.127325] [ 23.134315] 2 locks held by ip/2861: [ 23.137987] #0: 000000003b766c72 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x338/0x4e0 [ 23.146231] #1: 00000000ecf0c3b4 (_xmit_ETHER){+...}, at: dev_uc_add+0x24/0x70 [ 23.153757] [ 23.153757] stack backtrace: [ 23.158243] CPU: 0 PID: 2861 Comm: ip Not tainted 5.0.0-rc3-00013-g56c857a1b8d3 #118 [ 23.166212] Hardware name: Globalscale Marvell ESPRESSOBin Board (DT) [ 23.172843] Call trace: [ 23.175358] dump_backtrace+0x0/0x188 [ 23.179116] show_stack+0x14/0x20 [ 23.182524] dump_stack+0xb4/0xec [ 23.185928] __lock_acquire+0x123c/0x1860 [ 23.190048] lock_acquire+0xc8/0x248 [ 23.193724] _raw_spin_lock_bh+0x40/0x58 [ 23.197755] dev_set_rx_mode+0x1c/0x38 [ 23.201607] dev_set_promiscuity+0x3c/0x50 [ 23.205820] dsa_slave_change_rx_flags+0x5c/0x70 [ 23.210567] __dev_set_promiscuity+0x148/0x1e0 [ 23.215136] __dev_set_rx_mode+0x74/0x98 [ 23.219167] dev_uc_add+0x54/0x70 [ 23.222575] macvlan_open+0x170/0x1d0 [ 23.226336] __dev_open+0xe0/0x160 [ 23.229830] __dev_change_flags+0x16c/0x1b8 [ 23.234132] dev_change_flags+0x20/0x60 [ 23.238074] do_setlink+0x2d0/0xc50 [ 23.241658] __rtnl_newlink+0x5f8/0x6e8 [ 23.245601] rtnl_newlink+0x50/0x78 [ 23.249184] rtnetlink_rcv_msg+0x360/0x4e0 [ 23.253397] netlink_rcv_skb+0xe8/0x130 [ 23.257338] rtnetlink_rcv+0x14/0x20 [ 23.261012] netlink_unicast+0x190/0x210 [ 23.265043] netlink_sendmsg+0x288/0x350 [ 23.269075] sock_sendmsg+0x18/0x30 [ 23.272659] ___sys_sendmsg+0x29c/0x2c8 [ 23.276602] __sys_sendmsg+0x60/0xb8 [ 23.280276] __arm64_sys_sendmsg+0x1c/0x28 [ 23.284488] el0_svc_common+0xd8/0x138 [ 23.288340] el0_svc_handler+0x24/0x80 [ 23.292192] el0_svc+0x8/0xc This looks fairly harmless (no actual deadlock occurs), and is fixed in a similar way to c6894dec ("bridge: fix lockdep addr_list_lock false positive splat") by putting the addr_list_lock in its own lockdep class. Signed-off-by:Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Rundong Ge authored
The unbalance of master's promiscuity or allmulti will happen after ifdown and ifup a slave interface which is in a bridge. When we ifdown a slave interface , both the 'dsa_slave_close' and 'dsa_slave_change_rx_flags' will clear the master's flags. The flags of master will be decrease twice. In the other hand, if we ifup the slave interface again, since the slave's flags were cleared the 'dsa_slave_open' won't set the master's flag, only 'dsa_slave_change_rx_flags' that triggered by 'br_add_if' will set the master's flags. The flags of master is increase once. Only propagating flag changes when a slave interface is up makes sure this does not happen. The 'vlan_dev_change_rx_flags' had the same problem and was fixed, and changes here follows that fix. Fixes: 91da11f8 ("net: Distributed Switch Architecture protocol support") Signed-off-by:
Rundong Ge <rdong.ge@gmail.com> Signed-off-by:
-
- 04 Feb, 2019 18 commits
-
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/qeth: fixes 2019-02-04 please apply the following four fixes to -net. Patch 1 takes care of a common resource leak in various error paths, while the second patch fixes a misordered kfree when cleaning up after an error. The other two patches ensure that there's no stale work dangling on workqueues when the qeth device has already been offlined and/or removed. ==================== Signed-off-by: -
Julian Wiedmann authored
Work for Bridgeport events is currently placed on a driver-wide workqueue. If the card is removed and freed while any such work is still active, this causes a use-after-free. So put the events on a per-card queue, where we can control their lifetime. As we also don't want stale events to last beyond an offline & online cycle, flush this queue when setting the card offline. Fixes: b4d72c08 ("qeth: bridgeport support - basic control") Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
A card's close_dev work is scheduled on a driver-wide workqueue. If the card is removed and freed while the work is still active, this causes a use-after-free. So make sure that the work is completed before freeing the card. Fixes: 0f54761d ("qeth: Support VEPA mode") Signed-off-by:
-
Julian Wiedmann authored
The error path in qeth_alloc_qdio_buffers() that takes care of cleaning up the Output Queues is buggy. It first frees the queue, but then calls qeth_clear_outq_buffers() with that very queue struct. Make the call to qeth_clear_outq_buffers() part of the free action (in the correct order), and while at it fix the naming of the helper. Fixes: 0da9581d ("qeth: exploit asynchronous delivery of storage blocks") Signed-off-by:
Alexandra Winter <wintera@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
Whenever we fail before/while starting an IO, make sure to release the IO buffer. Usually qeth_irq() would do this for us, but if the IO doesn't even start we obviously won't get an interrupt for it either. Signed-off-by:
-
Petr Machata authored
In fl_change(), when adding a new rule (i.e. fold == NULL), a driver may reject the new rule, for example due to resource exhaustion. By that point, the new rule was already assigned a mask, and it was added to that mask's hash table. The clean-up path that's invoked as a result of the rejection however neglects to undo the hash table addition, and proceeds to free the new rule, thus leaving a dangling pointer in the hash table. Fix by removing fnew from the mask's hash table before it is freed. Fixes: 35cc3cef ("net/sched: cls_flower: Reject duplicated rules also under skip_sw") Signed-off-by:
Petr Machata <petrm@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2019-02-04' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 5.0 First set of small, but importnat, fixes for 5.0. iwlwifi * fix a build regression introduced in 5.0-rc1 wlcore * fix a firmware regression from v4.18-rc1 mt76x0 * fix for configuring tx power from user space ath10k * fix wcn3990 regression from v4.20-rc1 ==================== Signed-off-by:
-
David S. Miller authored
Ursula Braun says: ==================== net/smc: fixes 2019-02-04 here are more fixes in the smc code for the net tree: Patch 1 fixes an IB-related problem with SMCR. Patch 2 fixes a cursor problem for one-way traffic. Patch 3 fixes a problem with RMB-reusage. Patch 4 fixes a closing issue. ==================== Signed-off-by: -
Ursula Braun authored
If some kind of closing is received from the peer while still in state SMC_INIT, it means the peer has had an active connection and closed the socket quickly before listen_work finished. This should not result in a shortcut from state SMC_INIT to state SMC_CLOSED. This patch adds the socket to the accept queue in state SMC_APPCLOSEWAIT1. The socket reaches state SMC_CLOSED once being accepted and closed with smc_release(). Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
-
Ursula Braun authored
Once RMBs are flagged as unused they are candidates for reuse. Thus the LLC DELETE RKEY operaton should be made before flagging the RMB as unused. Fixes: c7674c00 ("net/smc: unregister rkeys of unused buffer") Signed-off-by:
-
Ursula Braun authored
In some scenarios a separate consumer cursor update is necessary. The decision is made in smc_tx_consumer_cursor_update(). The sender_free computation could be wrong: The rx confirmed cursor is always smaller than or equal to the rx producer cursor. The parameters in the smc_curs_diff() call have to be exchanged, otherwise sender_free might even be negative. And if more data arrives local_rx_ctrl.prod might be updated, enabling a cursor difference between local_rx_ctrl.prod and rx confirmed cursor larger than the RMB size. This case is not covered by smc_curs_diff(). Thus function smc_curs_diff_large() is introduced here. If a recvmsg() is processed in parallel, local_tx_ctrl.cons might change during smc_cdc_msg_send. Make sure rx_curs_confirmed is updated with the actually sent local_tx_ctrl.cons value. Fixes: e82f2e31 ("net/smc: optimize consumer cursor updates") Signed-off-by:
-
Ursula Braun authored
The work requests for rdma writes are built in local variables within function smc_tx_rdma_write(). This violates the rule that the work request storage has to stay till the work request is confirmed by a completion queue response. This patch introduces preallocated memory for these work requests. The storage is allocated, once a link (and thus a queue pair) is established. Signed-off-by:
-
Sebastian Andrzej Siewior authored
During sendmsg() a cloned skb is saved via dp83640_txtstamp() in ->tx_queue. After the NIC sends this packet, the PHY will reply with a timestamp for that TX packet. If the cable is pulled at the right time I don't see that packet. It might gets flushed as part of queue shutdown on NIC's side. Once the link is up again then after the next sendmsg() we enqueue another skb in dp83640_txtstamp() and have two on the list. Then the PHY will send a reply and decode_txts() attaches it to the first skb on the list. No crash occurs since refcounting works but we are one packet behind. linuxptp/ptp4l usually closes the socket and opens a new one (in such a timeout case) so those "stale" replies never get there. However it does not resume normal operation anymore. Purge old skbs in decode_txts(). Fixes: cb646e2b ("ptp: Added a clock driver for the National Semiconductor PHYTER.") Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
Kurt Kanzenbach <kurt@linutronix.de> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Pablo Neira Ayuso authored
Anonymous sets that are bound to rules from the same transaction trigger a kernel splat from the abort path due to double set list removal and double free. This patch updates the logic to search for the transaction that is responsible for creating the set and disable the set list removal and release, given the rule is now responsible for this. Lookup is reverse since the transaction that adds the set is likely to be at the tail of the list. Moreover, this patch adds the unbind step to deliver the event from the commit path. This should not be done from the worker thread, since we have no guarantees of in-order delivery to the listener. This patch removes the assumption that both activate and deactivate callbacks need to be provided. Fixes: cd5125d8 ("netfilter: nf_tables: split set destruction in deactivate and destroy phase") Reported-by:
Mikhail Morfikov <mmorfikov@gmail.com> Signed-off-by:
-
Martynas Pumputis authored
It is possible that two concurrent packets originating from the same socket of a connection-less protocol (e.g. UDP) can end up having different IP_CT_DIR_REPLY tuples which results in one of the packets being dropped. To illustrate this, consider the following simplified scenario: 1. Packet A and B are sent at the same time from two different threads by same UDP socket. No matching conntrack entry exists yet. Both packets cause allocation of a new conntrack entry. 2. get_unique_tuple gets called for A. No clashing entry found. conntrack entry for A is added to main conntrack table. 3. get_unique_tuple is called for B and will find that the reply tuple of B is already taken by A. It will allocate a new UDP source port for B to resolve the clash. 4. conntrack entry for B cannot be added to main conntrack table because its ORIGINAL direction is clashing with A and the REPLY directions of A and B are not the same anymore due to UDP source port reallocation done in step 3. This patch modifies nf_conntrack_tuple_taken so it doesn't consider colliding reply tuples if the IP_CT_DIR_ORIGINAL tuples are equal. [ Florian: simplify patch to not use .allow_clash setting and always ignore identical flows ] Signed-off-by:
Martynas Pumputis <martynas@weave.works> Signed-off-by:
-
Florian Westphal authored
Check basic nat/redirect/masquerade for ipv4 and ipv6. Signed-off-by:
-
Naresh Kamboju authored
In selftests the config fragment for netfilter was added as NF_TABLES_INET=y and this patch correct it as CONFIG_NF_TABLES_INET=y Signed-off-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Acked-by:
-
Toshiaki Makita authored
Previously virtnet_xdp_xmit() did not account for device tx counters, which caused confusions. To be consistent with SKBs, account them on freeing xdp_frames. Reported-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
- 03 Feb, 2019 7 commits
-
-
Xin Long authored
Now when using stream reconfig to add out streams, stream->out will get re-allocated, and all old streams' information will be copied to the new ones and the old ones will be freed. So without stream->out_curr updated, next time when trying to send from stream->out_curr stream, a panic would be caused. This patch is to check and update stream->out_curr when allocating stream_out. v1->v2: - define fa_index() to get elem index from stream->out_curr. v2->v3: - repost with no change. Fixes: 5bbbbe32 ("sctp: introduce stream scheduler foundations") Reported-by:
Ying Xu <yinxu@redhat.com> Reported-by: syzbot+e33a3a138267ca119c7d@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Siva Rebbagondla authored
Create an entry for Redpine wireless driver and add Amit and myself as maintainers. Signed-off-by:
Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Florian Fainelli authored
Broadcom STB chips support a deep sleep mode where all register contents are lost. Because we were stashing the MagicPacket password into some of these registers a suspend into that deep sleep then a resumption would not lead to being able to wake-up from MagicPacket with password again. Fix this by keeping a software copy of the password and program it during suspend. Fixes: 83e82f4c ("net: systemport: add Wake-on-LAN support") Signed-off-by:
-
David S. Miller authored
Stefano Garzarella says: ==================== vsock/virtio: fix issues on device hot-unplug These patches try to handle the hot-unplug of vsock virtio transport device in a proper way. Maybe move the vsock_core_init()/vsock_core_exit() functions in the module_init and module_exit of vsock_virtio_transport module can't be the best way, but the architecture of vsock_core forces us to this approach for now. The vsock_core proto_ops expect a valid pointer to the transport device, so we can't call vsock_core_exit() until there are open sockets. v2 -> v3: - Rebased on master v1 -> v2: - Fixed commit message of patch 1. - Added Reviewed-by, Acked-by tags by Stefan ==================== Signed-off-by: -
Stefano Garzarella authored
When the virtio transport device disappear, we should reset all connected sockets in order to inform the users. Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
-
Stefano Garzarella authored
virtio_vsock_remove() invokes the vsock_core_exit() also if there are opened sockets for the AF_VSOCK protocol family. In this way the vsock "transport" pointer is set to NULL, triggering the kernel panic at the first socket activity. This patch move the vsock_core_init()/vsock_core_exit() in the virtio_vsock respectively in module_init and module_exit functions, that cannot be invoked until there are open sockets. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1609699Reported-by:
Yan Fu <yafu@redhat.com> Signed-off-by:
-
Russell King authored
This reverts commit 6623c0fb. The original diagnosis was incorrect: it appears that the NIC had PHY polling mode enabled, which meant that it overwrote the PHYs advertisement register during negotiation. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Tested-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
-
- 01 Feb, 2019 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf 2019-01-31 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) disable preemption in sender side of socket filters, from Alexei. 2) fix two potential deadlocks in syscall bpf lookup and prog_register, from Martin and Alexei. 3) fix BTF to allow typedef on func_proto, from Yonghong. 4) two bpftool fixes, from Jiri and Paolo. ==================== Signed-off-by: -
Eric Dumazet authored
Similarly to commit 276bdb82 ("dccp: check ccid before dereferencing") it is wise to test for a NULL ccid. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 5.0.0-rc3+ #37 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:ccid_hc_tx_parse_options net/dccp/ccid.h:205 [inline] RIP: 0010:dccp_parse_options+0x8d9/0x12b0 net/dccp/options.c:233 Code: c5 0f b6 75 b3 80 38 00 0f 85 d6 08 00 00 48 b9 00 00 00 00 00 fc ff df 48 8b 45 b8 4c 8b b8 f8 07 00 00 4c 89 f8 48 c1 e8 03 <80> 3c 08 00 0f 85 95 08 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b kobject: 'loop5' (0000000080f78fc1): kobject_uevent_env RSP: 0018:ffff8880a94df0b8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8880858ac723 RCX: dffffc0000000000 RDX: 0000000000000100 RSI: 0000000000000007 RDI: 0000000000000001 RBP: ffff8880a94df140 R08: 0000000000000001 R09: ffff888061b83a80 R10: ffffed100c370752 R11: ffff888061b83a97 R12: 0000000000000026 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8880ae700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0defa33518 CR3: 000000008db5e000 CR4: 00000000001406e0 kobject: 'loop5' (0000000080f78fc1): fill_kobj_path: path = '/devices/virtual/block/loop5' DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: dccp_rcv_state_process+0x2b6/0x1af6 net/dccp/input.c:654 dccp_v4_do_rcv+0x100/0x190 net/dccp/ipv4.c:688 sk_backlog_rcv include/net/sock.h:936 [inline] __sk_receive_skb+0x3a9/0xea0 net/core/sock.c:473 dccp_v4_rcv+0x10cb/0x1f80 net/dccp/ipv4.c:880 ip_protocol_deliver_rcu+0xb6/0xa20 net/ipv4/ip_input.c:208 ip_local_deliver_finish+0x23b/0x390 net/ipv4/ip_input.c:234 NF_HOOK include/linux/netfilter.h:289 [inline] NF_HOOK include/linux/netfilter.h:283 [inline] ip_local_deliver+0x1f0/0x740 net/ipv4/ip_input.c:255 dst_input include/net/dst.h:450 [inline] ip_rcv_finish+0x1f4/0x2f0 net/ipv4/ip_input.c:414 NF_HOOK include/linux/netfilter.h:289 [inline] NF_HOOK include/linux/netfilter.h:283 [inline] ip_rcv+0xed/0x620 net/ipv4/ip_input.c:524 __netif_receive_skb_one_core+0x160/0x210 net/core/dev.c:4973 __netif_receive_skb+0x2c/0x1c0 net/core/dev.c:5083 process_backlog+0x206/0x750 net/core/dev.c:5923 napi_poll net/core/dev.c:6346 [inline] net_rx_action+0x76d/0x1930 net/core/dev.c:6412 __do_softirq+0x30b/0xb11 kernel/softirq.c:292 run_ksoftirqd kernel/softirq.c:654 [inline] run_ksoftirqd+0x8e/0x110 kernel/softirq.c:646 smpboot_thread_fn+0x6ab/0xa10 kernel/smpboot.c:164 kthread+0x357/0x430 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Modules linked in: ---[ end trace 58a0ba03bea2c376 ]--- RIP: 0010:ccid_hc_tx_parse_options net/dccp/ccid.h:205 [inline] RIP: 0010:dccp_parse_options+0x8d9/0x12b0 net/dccp/options.c:233 Code: c5 0f b6 75 b3 80 38 00 0f 85 d6 08 00 00 48 b9 00 00 00 00 00 fc ff df 48 8b 45 b8 4c 8b b8 f8 07 00 00 4c 89 f8 48 c1 e8 03 <80> 3c 08 00 0f 85 95 08 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b RSP: 0018:ffff8880a94df0b8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8880858ac723 RCX: dffffc0000000000 RDX: 0000000000000100 RSI: 0000000000000007 RDI: 0000000000000001 RBP: ffff8880a94df140 R08: 0000000000000001 R09: ffff888061b83a80 R10: ffffed100c370752 R11: ffff888061b83a97 R12: 0000000000000026 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8880ae700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0defa33518 CR3: 0000000009871000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by:
-
David S. Miller authored
Ursula Braun says: ==================== net/smc: fixes 2019-01-30 here are some fixes in different areas of the smc code for the net tree. ==================== Signed-off-by:
-
