- 30 Apr, 2016 32 commits
-
-
Josh Boyer authored
commit 9c6ba456 upstream. The powermate driver expects at least one valid USB endpoint in its probe function. If given malicious descriptors that specify 0 for the number of endpoints, it will crash. Validate the number of endpoints on the interface before using them. The full report for this issue can be found here: http://seclists.org/bugtraq/2016/Mar/85Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Geert Uytterhoeven authored
commit a25f4a95 upstream. drivers/rtc/rtc-vr41xx.c:229: warning: ‘vr41xx_rtc_alarm_irq_enable’ defined but not used Apparently the conversion to alarm_irq_enable forgot to wire up the callback. Fixes: 16380c15 ("RTC: Convert rtc drivers to use the alarm_irq_enable method") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Vittorio Gambaletta (VittGam) authored
commit 4061db03 upstream. The clock measurement on the AC'97 audio card found in the IBM ThinkPad X41 will often fail, so add a quirk entry to fix it. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=441087Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
DingXiang authored
commit 4df2bf46 upstream. Otherwise loading a "snapshot" table using the same device for the origin and COW devices, e.g.: echo "0 20971520 snapshot 253:3 253:3 P 8" | dmsetup create snap will trigger: BUG: unable to handle kernel NULL pointer dereference at 0000000000000098 [ 1958.979934] IP: [<ffffffffa040efba>] dm_exception_store_set_chunk_size+0x7a/0x110 [dm_snapshot] [ 1958.989655] PGD 0 [ 1958.991903] Oops: 0000 [#1] SMP ... [ 1959.059647] CPU: 9 PID: 3556 Comm: dmsetup Tainted: G IO 4.5.0-rc5.snitm+ #150 ... [ 1959.083517] task: ffff8800b9660c80 ti: ffff88032a954000 task.ti: ffff88032a954000 [ 1959.091865] RIP: 0010:[<ffffffffa040efba>] [<ffffffffa040efba>] dm_exception_store_set_chunk_size+0x7a/0x110 [dm_snapshot] [ 1959.104295] RSP: 0018:ffff88032a957b30 EFLAGS: 00010246 [ 1959.110219] RAX: 0000000000000000 RBX: 0000000000000008 RCX: 0000000000000001 [ 1959.118180] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff880329334a00 [ 1959.126141] RBP: ffff88032a957b50 R08: 0000000000000000 R09: 0000000000000001 [ 1959.134102] R10: 000000000000000a R11: f000000000000000 R12: ffff880330884d80 [ 1959.142061] R13: 0000000000000008 R14: ffffc90001c13088 R15: ffff880330884d80 [ 1959.150021] FS: 00007f8926ba3840(0000) GS:ffff880333440000(0000) knlGS:0000000000000000 [ 1959.159047] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1959.165456] CR2: 0000000000000098 CR3: 000000032f48b000 CR4: 00000000000006e0 [ 1959.173415] Stack: [ 1959.175656] ffffc90001c13040 ffff880329334a00 ffff880330884ed0 ffff88032a957bdc [ 1959.183946] ffff88032a957bb8 ffffffffa040f225 ffff880329334a30 ffff880300000000 [ 1959.192233] ffffffffa04133e0 ffff880329334b30 0000000830884d58 00000000569c58cf [ 1959.200521] Call Trace: [ 1959.203248] [<ffffffffa040f225>] dm_exception_store_create+0x1d5/0x240 [dm_snapshot] [ 1959.211986] [<ffffffffa040d310>] snapshot_ctr+0x140/0x630 [dm_snapshot] [ 1959.219469] [<ffffffffa0005c44>] ? dm_split_args+0x64/0x150 [dm_mod] [ 1959.226656] [<ffffffffa0005ea7>] dm_table_add_target+0x177/0x440 [dm_mod] [ 1959.234328] [<ffffffffa0009203>] table_load+0x143/0x370 [dm_mod] [ 1959.241129] [<ffffffffa00090c0>] ? retrieve_status+0x1b0/0x1b0 [dm_mod] [ 1959.248607] [<ffffffffa0009e35>] ctl_ioctl+0x255/0x4d0 [dm_mod] [ 1959.255307] [<ffffffff813304e2>] ? memzero_explicit+0x12/0x20 [ 1959.261816] [<ffffffffa000a0c3>] dm_ctl_ioctl+0x13/0x20 [dm_mod] [ 1959.268615] [<ffffffff81215eb6>] do_vfs_ioctl+0xa6/0x5c0 [ 1959.274637] [<ffffffff81120d2f>] ? __audit_syscall_entry+0xaf/0x100 [ 1959.281726] [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70 [ 1959.288814] [<ffffffff81216449>] SyS_ioctl+0x79/0x90 [ 1959.294450] [<ffffffff8167e4ae>] entry_SYSCALL_64_fastpath+0x12/0x71 ... [ 1959.323277] RIP [<ffffffffa040efba>] dm_exception_store_set_chunk_size+0x7a/0x110 [dm_snapshot] [ 1959.333090] RSP <ffff88032a957b30> [ 1959.336978] CR2: 0000000000000098 [ 1959.344121] ---[ end trace b049991ccad1169e ]--- Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1195899Signed-off-by: Ding Xiang <dingxiang@huawei.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> [bwh: Backported to 3.2: the device path parsing code is rather different, but move it into dm_get_dev_t() anyway] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Dmitry Tunin authored
commit 75c6aca4 upstream. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3472 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb BugLink: https://bugs.launchpad.net/bugs/1552925Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
OGAWA Hirofumi authored
commit c0a2ad9b upstream. On umount path, jbd2_journal_destroy() writes latest transaction ID (->j_tail_sequence) to be used at next mount. The bug is that ->j_tail_sequence is not holding latest transaction ID in some cases. So, at next mount, there is chance to conflict with remaining (not overwritten yet) transactions. mount (id=10) write transaction (id=11) write transaction (id=12) umount (id=10) <= the bug doesn't write latest ID mount (id=10) write transaction (id=11) crash mount [recovery process] transaction (id=11) transaction (id=12) <= valid transaction ID, but old commit must not replay Like above, this bug become the cause of recovery failure, or FS corruption. So why ->j_tail_sequence doesn't point latest ID? Because if checkpoint transactions was reclaimed by memory pressure (i.e. bdev_try_to_free_page()), then ->j_tail_sequence is not updated. (And another case is, __jbd2_journal_clean_checkpoint_list() is called with empty transaction.) So in above cases, ->j_tail_sequence is not pointing latest transaction ID at umount path. Plus, REQ_FLUSH for checkpoint is not done too. So, to fix this problem with minimum changes, this patch updates ->j_tail_sequence, and issue REQ_FLUSH. (With more complex changes, some optimizations would be possible to avoid unnecessary REQ_FLUSH for example though.) BTW, journal->j_tail_sequence = ++journal->j_transaction_sequence; Increment of ->j_transaction_sequence seems to be unnecessary, but ext3 does this. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Douglas Gilbert authored
commit 5ecee0a3 upstream. One of the strange things that the original sg driver did was let the user provide both a data-out buffer (it followed the sg_header+cdb) _and_ specify a reply length greater than zero. What happened was that the user data-out buffer was copied into some kernel buffers and then the mid level was told a read type operation would take place with the data from the device overwriting the same kernel buffers. The user would then read those kernel buffers back into the user space. From what I can tell, the above action was broken by commit fad7f01e ("sg: set dxferp to NULL for READ with the older SG interface") in 2008 and syzkaller found that out recently. Make sure that a user space pointer is passed through when data follows the sg_header structure and command. Fix the abnormal case when a non-zero reply_len is also given. Fixes: fad7f01eSigned-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Mario Kleiner authored
commit 459ee1c3 upstream. As observed on Apple iMac10,1, DCE-3.2, RV-730, link rate of 2.7 Ghz is not selected, because the args.v1.ucConfig flag setting for 2.7 Ghz gets overwritten by a following assignment of the transmitter to use. Move link rate setup a few lines down to fix this. In practice this didn't have any positive or negative effect on display setup on the tested iMac10,1 so i don't know if backporting to stable makes sense or not. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Maurizio Lombardi authored
commit 84bd6499 upstream. In beiscsi_setup_boot_info(), the boot_kset pointer should be set to NULL in case of failure otherwise an invalid pointer dereference may occur later. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Bjorn Helgaas authored
commit b8941571 upstream. The Home Agent and PCU PCI devices in Broadwell-EP have a non-BAR register where a BAR should be. We don't know what the side effects of sizing the "BAR" would be, and we don't know what address space the "BAR" might appear to describe. Mark these devices as having non-compliant BARs so the PCI core doesn't touch them. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Marco Angaroni authored
commit 7617a24f upstream. The IPVS SIP persistence engine is not able to parse the SIP header "Call-ID" when such header is inserted in the first positions of the SIP message. When IPVS is configured with "--pe sip" option, like for example: ipvsadm -A -u 1.2.3.4:5060 -s rr --pe sip -p 120 -o some particular messages (see below for details) do not create entries in the connection template table, which can be listed with: ipvsadm -Lcn --persistent-conn Problematic SIP messages are SIP responses having "Call-ID" header positioned just after message first line: SIP/2.0 200 OK [Call-ID header here] [rest of the headers] When "Call-ID" header is positioned down (after a few other headers) it is correctly recognized. This is due to the data offset used in get_callid function call inside ip_vs_pe_sip.c file: since dptr already points to the start of the SIP message, the value of dataoff should be initially 0. Otherwise the header is searched starting from some bytes after the first character of the SIP message. Fixes: 758ff033 ("IPVS: sip persistence engine") Signed-off-by: Marco Angaroni <marcoangaroni@gmail.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Thomas Gleixner authored
commit e9532e69 upstream. On CPU hotplug the steal time accounting can keep a stale rq->prev_steal_time value over CPU down and up. So after the CPU comes up again the delta calculation in steal_account_process_tick() wreckages itself due to the unsigned math: u64 steal = paravirt_steal_clock(smp_processor_id()); steal -= this_rq()->prev_steal_time; So if steal is smaller than rq->prev_steal_time we end up with an insane large value which then gets added to rq->prev_steal_time, resulting in a permanent wreckage of the accounting. As a consequence the per CPU stats in /proc/stat become stale. Nice trick to tell the world how idle the system is (100%) while the CPU is 100% busy running tasks. Though we prefer realistic numbers. None of the accounting values which use a previous value to account for fractions is reset at CPU hotplug time. update_rq_clock_task() has a sanity check for prev_irq_time and prev_steal_time_rq, but that sanity check solely deals with clock warps and limits the /proc/stat visible wreckage. The prev_time values are still wrong. Solution is simple: Reset rq->prev_*_time when the CPU is plugged in again. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: commit 095c0aa8 "sched: adjust scheduler cpu power for stolen time" Fixes: commit aa483808 "sched: Remove irq time from available CPU power" Fixes: commit e6e6685a "KVM guest: Steal time accounting" Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1603041539490.3686@nanosSigned-off-by: Ingo Molnar <mingo@kernel.org> [bwh: Backported to 3.2: adjust filenames] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Radim Krčmář authored
commit 7dd0fdff upstream. Discard policy uses ack_notifiers to prevent injection of PIT interrupts before EOI from the last one. This patch changes the policy to always try to deliver the interrupt, which makes a difference when its vector is in ISR. Old implementation would drop the interrupt, but proposed one injects to IRR, like real hardware would. The old policy breaks legacy NMI watchdogs, where PIT is used through virtual wire (LVT0): PIT never sends an interrupt before receiving EOI, thus a guest deadlock with disabled interrupts will stop NMIs. Note that NMI doesn't do EOI, so PIT also had to send a normal interrupt through IOAPIC. (KVM's PIT is deeply rotten and luckily not used much in modern systems.) Even though there is a chance of regressions, I think we can fix the LVT0 NMI bug without introducing a new tick policy. Reported-by: Yuki Shibuya <shibuya.yk@ncos.nec.co.jp> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [bwh: Backported to 3.2: - s/ps->reinject/ps->pit_timer.reinject/ - Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Oliver Neukum authored
commit 0d5ce778 upstream. A typo of j for i led to a logic bug. To rule out future confusion, the variable names are made meaningful. Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Michael Hennerich authored
commit f3df53e4 upstream. Fix RDAC read back errors caused by a typo. Value must shift by 2. Fixes: a4bd3949 ("drivers/misc/ad525x_dpot.c: new features") Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Mateusz Guzik authored
commit 2e83b79b upstream. This plugs 2 trivial leaks in xfs_attr_shortform_list and xfs_attr3_leaf_list_int. Signed-off-by: Mateusz Guzik <mguzik@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com> [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
J. Bruce Fields authored
commit 4aed9c46 upstream. A number of spots in the xdr decoding follow a pattern like n = be32_to_cpup(p++); READ_BUF(n + 4); where n is a u32. The only bounds checking is done in READ_BUF itself, but since it's checking (n + 4), it won't catch cases where n is very large, (u32)(-4) or higher. I'm not sure exactly what the consequences are, but we've seen crashes soon after. Instead, just break these up into two READ_BUF()s. Signed-off-by: J. Bruce Fields <bfields@redhat.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Michael S. Tsirkin authored
commit 10e7ac22 upstream. Calling return copy_to_user(...) in an ioctl will not do the right thing if there's a pagefault: copy_to_user returns the number of bytes not copied in this case. Fix up watchdog/rc32434_wdt to do return copy_to_user(...)) ? -EFAULT : 0; instead. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Hans de Goede authored
commit 5c915c68 upstream. On my bttv card "Hauppauge WinTV [card=10]" capturing in YV12 fmt at max size results in a solid green rectangle being captured (all colors 0 in YUV). This turns out to be caused by max-width (924) not being a multiple of 16. We've likely never hit this problem before since normally xawtv / tvtime, etc. will prefer packed pixel formats. But when using a video card which is using xf86-video-modesetting + glamor, only planar XVideo fmts are available, and xawtv will chose a matching capture format to avoid needing to do conversion, triggering the solid green window problem. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> [bwh: Backported to 3.2: adjust filename, context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Dmitry Tunin authored
commit 81d90442 upstream. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=03 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3014 Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb BugLink: https://bugs.launchpad.net/bugs/1546694Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Bjorn Helgaas authored
commit b84106b4 upstream. The PCI config header (first 64 bytes of each device's config space) is defined by the PCI spec so generic software can identify the device and manage its usage of I/O, memory, and IRQ resources. Some non-spec-compliant devices put registers other than BARs where the BARs should be. When the PCI core sizes these "BARs", the reads and writes it does may have unwanted side effects, and the "BAR" may appear to describe non-sensical address space. Add a flag bit to mark non-compliant devices so we don't touch their BARs. Turn off IO/MEM decoding to prevent the devices from consuming address space, since we can't read the BARs to find out what that address space would be. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Andi Kleen <ak@linux.intel.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Sudip Mukherjee authored
commit ea32f065 upstream. On error we jumped to the error label and returned the error code but we missed releasing sinfo. Fixes: 5fe74014172d ("mac80211: avoid excessive stack usage in sta_info") Reviewed-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> [bwh: Backported to 3.2: there's no out_err label but there is another error case that would leak sinfo] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Arnd Bergmann authored
commit 0ef049dc upstream. When CONFIG_OPTIMIZE_INLINING is set, the sta_info_insert_finish function consumes more stack than normally, exceeding the 1024 byte limit on ARM: net/mac80211/sta_info.c: In function 'sta_info_insert_finish': net/mac80211/sta_info.c:561:1: error: the frame size of 1080 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] It turns out that there are two functions that put a 'struct station_info' on the stack: __sta_info_destroy_part2 and sta_info_insert_finish, and this structure alone requires up to 792 bytes. Hoping that both are called rarely enough, this replaces the on-stack structure with a dynamic allocation, which unfortunately requires some suboptimal error handling for out-of-memory. The __sta_info_destroy_part2 function is actually affected by the stack usage twice because it calls cfg80211_del_sta_sinfo(), which has another instance of struct station_info on its stack. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 98b62183 ("mac80211/cfg80211: add station events") Fixes: 6f7a8d26 ("mac80211: send statistics with delete station event") Signed-off-by: Johannes Berg <johannes.berg@intel.com> [bwh: Backported to 3.2: - There's only one instance to fix - Adjust context,indentation - Use 'return' instead of 'goto out_err'] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Raghava Aditya Renukunta authored
commit f88fa79a upstream. aac_fib_map_free() calls pci_free_consistent() without checking that dev->hw_fib_va is not NULL and dev->max_fib_size is not zero.If they are indeed NULL/0, this will result in a hang as pci_free_consistent() will attempt to invalidate cache for the entire 64-bit address space (which would take a very long time). Fixed by adding a check to make sure that dev->hw_fib_va and dev->max_fib_size are not NULL and 0 respectively. Fixes: 9ad5204d - "[SCSI]aacraid: incorrect dma mapping mask during blinked recover or user initiated reset" Signed-off-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Dmitry Tunin authored
commit 28c971d8 upstream. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e095 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb This device requires ar3k/AthrBT_0x31010100.dfu and ar3k/ramps_0x31010100_40.dfu firmware files that are not in linux-firmware yet. BugLink: https://bugs.launchpad.net/bugs/1542944Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Dmitry Tunin authored
commit 609574eb upstream. T: Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3395 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb BugLink: https://bugs.launchpad.net/bugs/1542564Reported-and-tested-by: Christopher Simerly <kilikopela29@gmail.com> Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Hans de Goede authored
commit 3e71da19 upstream. bytesperline should be the bytesperline for the first plane for planar formats, not that of all planes combined. This fixes a crash in xawtv caused by the wrong bpl. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1305389Reported-and-tested-by: Stas Sergeev <stsp@list.ru> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> [bwh: Backported to 3.2: adjust filename, context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Oliver Neukum authored
commit 264904cc upstream. Some devices I got show an inability to operate right after power on if they are already connected. They are beyond recovery if the descriptors are requested multiple times. So in case of a timeout we rather bail early and reset again. But it must be done only on the first loop lest we get into a reset/time out spiral that can be overcome with a retry. This patch is a rework of a patch that fell through the cracks. http://www.spinics.net/lists/linux-usb/msg103263.htmlSigned-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Peter Hurley authored
commit 401879c5 upstream. The N_IRDA line discipline may access the previous line discipline's closed and already-fre private data on open [1]. The tty->disc_data field _never_ refers to valid data on entry to the line discipline's open() method. Rather, the ldisc is expected to initialize that field for its own use for the lifetime of the instance (ie. from open() to close() only). [1] ================================================================== BUG: KASAN: use-after-free in irtty_open+0x422/0x550 at addr ffff8800331dd068 Read of size 4 by task a.out/13960 ============================================================================= BUG kmalloc-512 (Tainted: G B ): kasan: bad access detected ----------------------------------------------------------------------------- ... Call Trace: [<ffffffff815fa2ae>] __asan_report_load4_noabort+0x3e/0x40 mm/kasan/report.c:279 [<ffffffff836938a2>] irtty_open+0x422/0x550 drivers/net/irda/irtty-sir.c:436 [<ffffffff829f1b80>] tty_ldisc_open.isra.2+0x60/0xa0 drivers/tty/tty_ldisc.c:447 [<ffffffff829f21c0>] tty_set_ldisc+0x1a0/0x940 drivers/tty/tty_ldisc.c:567 [< inline >] tiocsetd drivers/tty/tty_io.c:2650 [<ffffffff829da49e>] tty_ioctl+0xace/0x1fd0 drivers/tty/tty_io.c:2883 [< inline >] vfs_ioctl fs/ioctl.c:43 [<ffffffff816708ac>] do_vfs_ioctl+0x57c/0xe60 fs/ioctl.c:607 [< inline >] SYSC_ioctl fs/ioctl.c:622 [<ffffffff81671204>] SyS_ioctl+0x74/0x80 fs/ioctl.c:613 [<ffffffff852a7876>] entry_SYSCALL_64_fastpath+0x16/0x7a Reported-and-tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Sebastian Frias authored
commit 0b41ce99 upstream. Some UART HW has a single register combining UART_DLL/UART_DLM (this was probably forgotten in the change that introduced the callbacks, commit b32b19b8) Fixes: b32b19b8 ("[SERIAL] 8250: set divisor register correctly ...") Signed-off-by: Sebastian Frias <sf84@laposte.net> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: - Adjust filename - We're using serial_{in,out}p for 8-bit I/O] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Hans de Goede authored
commit 7445e45d upstream. SPC 880NC PC camera discussions: http://www.pclinuxos.com/forum/index.php/topic,135688.0.htmlReported-by: Kikim <klucznik0@op.pl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Dan Carpenter authored
commit 6f3508f6 upstream. dct_sel_base_off is declared as a u64 but we're only using the lower 32 bits because of a shift wrapping bug. This can possibly truncate the upper 16 bits of DctSelBaseOffset[47:26], causing us to misdecode the CS row. Fixes: c8e518d5 ('amd64_edac: Sanitize f10_get_base_addr_offset') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20160120095451.GB19898@mwandaSigned-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
- 01 Apr, 2016 8 commits
-
-
Ben Hutchings authored
-
Ioan-Adrian Ratiu authored
commit e470127e upstream. The critical section protected by usbhid->lock in hid_ctrl() is too big and because of this it causes a recursive deadlock. "Too big" means the case statement and the call to hid_input_report() do not need to be protected by the spinlock (no URB operations are done inside them). The deadlock happens because in certain rare cases drivers try to grab the lock while handling the ctrl irq which grabs the lock before them as described above. For example newer wacom tablets like 056a:033c try to reschedule proximity reads from wacom_intuos_schedule_prox_event() calling hid_hw_request() -> usbhid_request() -> usbhid_submit_report() which tries to grab the usbhid lock already held by hid_ctrl(). There are two ways to get out of this deadlock: 1. Make the drivers work "around" the ctrl critical region, in the wacom case for ex. by delaying the scheduling of the proximity read request itself to a workqueue. 2. Shrink the critical region so the usbhid lock protects only the instructions which modify usbhid state, calling hid_input_report() with the spinlock unlocked, allowing the device driver to grab the lock first, finish and then grab the lock afterwards in hid_ctrl(). This patch implements the 2nd solution. Signed-off-by: Ioan-Adrian Ratiu <adi@adirat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> [bwh: Backported to 3.2: adjust context] Cc: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Vasily Kulikov authored
commit 8a5e5e02 upstream. Poison pointer values should be small enough to find a room in non-mmap'able/hardly-mmap'able space. E.g. on x86 "poison pointer space" is located starting from 0x0. Given unprivileged users cannot mmap anything below mmap_min_addr, it should be safe to use poison pointers lower than mmap_min_addr. The current poison pointer values of LIST_POISON{1,2} might be too big for mmap_min_addr values equal or less than 1 MB (common case, e.g. Ubuntu uses only 0x10000). There is little point to use such a big value given the "poison pointer space" below 1 MB is not yet exhausted. Changing it to a smaller value solves the problem for small mmap_min_addr setups. The values are suggested by Solar Designer: http://www.openwall.com/lists/oss-security/2015/05/02/6Signed-off-by: Vasily Kulikov <segoon@openwall.com> Cc: Solar Designer <solar@openwall.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Vladis Dronov authored
commit 8e20cf2b upstream. The aiptek driver crashes in aiptek_probe() when a specially crafted USB device without endpoints is detected. This fix adds a check that the device has proper configuration expected by the driver. Also an error return value is changed to more matching one in one of the error paths. Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Martin Schwidefsky authored
commit 3446c13b upstream. The fork of a process with four page table levels is broken since git commit 6252d702 "[S390] dynamic page tables." All new mm contexts are created with three page table levels and an asce limit of 4TB. If the parent has four levels dup_mmap will add vmas to the new context which are outside of the asce limit. The subsequent call to copy_page_range will walk the three level page table structure of the new process with non-zero pgd and pud indexes. This leads to memory clobbers as the pgd_index *and* the pud_index is added to the mm->pgd pointer without a pgd_deref in between. The init_new_context() function is selecting the number of page table levels for a new context. The function is used by mm_init() which in turn is called by dup_mm() and mm_alloc(). These two are used by fork() and exec(). The init_new_context() function can distinguish the two cases by looking at mm->context.asce_limit, for fork() the mm struct has been copied and the number of page table levels may not change. For exec() the mm_alloc() function set the new mm structure to zero, in this case a three-level page table is created as the temporary stack space is located at STACK_TOP_MAX = 4TB. This fixes CVE-2016-2143. Reported-by: Marcin Kościelnicki <koriakin@0x04.net> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [bwh: Backported to 3.2: - 31-bit s390 is still supported so keep the #ifdef CONFIG_64BIT conditions - Split page table locks are not implemented for PMDs so don't call pgtable_pmd_page_{ctor,dtor}() - PMDs are not accounted so don't call mm_inc_nr_pmds() - Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Linus Torvalds authored
commit 256faedc upstream. This reverts commit dbb17a21. It turns out that commit can cause problems for systems with multiple GPUs, and causes X to hang on at least a HP Pavilion dv7 with hybrid graphics. This got noticed originally in 4.4.4, where this patch had already gotten back-ported, but 4.5-rc7 was verified to have the same problem. Alexander Deucher says: "It looks like you have a muxed system so I suspect what's happening is that one of the display is being reported as connected for both the IGP and the dGPU and then the desktop environment gets confused or there some sort problem in the detect functions since the mux is not switched to the dGPU. I don't see an easy fix unless Dave has any ideas. I'd say just revert for now" Reported-by: Jörg-Volker Peetz <jvpeetz@web.de> Acked-by: Alexander Deucher <Alexander.Deucher@amd.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Richard Weinberger authored
commit e4f6daac upstream. ubi_start_leb_change() allocates too few bytes. ubi_more_leb_change_data() will write up to req->upd_bytes + ubi->min_io_size bytes. Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Maciej W. Rozycki authored
commit e723e3f7 upstream. Avoid sending a partially initialised `siginfo_t' structure along SIGFPE signals issued from `do_ov' and `do_trap_or_bp', leading to information leaking from the kernel stack. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-