- 07 Aug, 2014 40 commits
-
-
Sasha Levin authored
The rarely-executed memry-allocation-failed callback path generates a WARN_ON_ONCE() when smp_call_function_single() succeeds. Presumably it's supposed to warn on failures. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Cc: Christoph Lameter <cl@gentwo.org> Cc: Gilad Ben-Yossef <gilad@benyossef.com> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Tejun Heo <htejun@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Rik van Riel authored
This patch changes confusing #ifdef use in __access_remote_vm into merely ugly #ifdef use. Addresses bug https://bugzilla.kernel.org/show_bug.cgi?id=81651Signed-off-by:
Rik van Riel <riel@redhat.com> Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
-
Peter Feiner authored
After a VMA is created with the VM_SOFTDIRTY flag set, /proc/pid/pagemap should report that the VMA's virtual pages are soft-dirty until VM_SOFTDIRTY is cleared (i.e., by the next write of "4" to /proc/pid/clear_refs). However, pagemap ignores the VM_SOFTDIRTY flag for virtual addresses that fall in PTE holes (i.e., virtual addresses that don't have a PMD, PUD, or PGD allocated yet). To observe this bug, use mmap to create a VMA large enough such that there's a good chance that the VMA will occupy an unused PMD, then test the soft-dirty bit on its pages. In practice, I found that a VMA that covered a PMD's worth of address space was big enough. This patch adds the necessary VMA lookup to the PTE hole callback in /proc/pid/pagemap's page walk and sets soft-dirty according to the VMAs' VM_SOFTDIRTY flag. Signed-off-by:
Peter Feiner <pfeiner@google.com> Acked-by:
Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Hugh Dickins <hughd@google.com> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Kirill A. Shutemov authored
fault_around_bytes can only be changed via debugfs. Let's mark it read-mostly. Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Suggested-by:
David Rientjes <rientjes@google.com> Acked-by:
-
Kirill A. Shutemov authored
Things can go wrong if fault_around_bytes will be changed under do_fault_around(): between fault_around_mask() and fault_around_pages(). Let's read fault_around_bytes only once during do_fault_around() and calculate mask based on the reading. Note: fault_around_bytes can only be updated via debug interface. Also I've tried but was not able to trigger a bad behaviour without the patch. So I would not consider this patch as urgent. Signed-off-by:
-
Jerome Marchand authored
When memory cgoups are enabled, the code that decides to force to scan anonymous pages in get_scan_count() compares global values (free, high_watermark) to a value that is restricted to a memory cgroup (file). It make the code over-eager to force anon scan. For instance, it will force anon scan when scanning a memcg that is mainly populated by anonymous page, even when there is plenty of file pages to get rid of in others memcgs, even when swappiness == 0. It breaks user's expectation about swappiness and hurts performance. This patch makes sure that forced anon scan only happens when there not enough file pages for the all zone, not just in one random memcg. [hannes@cmpxchg.org: cleanups] Signed-off-by:
Jerome Marchand <jmarchan@redhat.com> Acked-by:
Michal Hocko <mhocko@suse.cz> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Reviewed-by:
-
Jerome Marchand authored
Quite a while ago, get_scan_ratio() has been renamed get_scan_count(), however a comment in shrink_active_list() still mention it. This patch fixes the outdated comment. Signed-off-by:
-
David Rientjes authored
The oom killer scans each process and determines whether it is eligible for oom kill or whether the oom killer should abort because of concurrent memory freeing. It will abort when an eligible process is found to have TIF_MEMDIE set, meaning it has already been oom killed and we're waiting for it to exit. Processes with task->mm == NULL should not be considered because they are either kthreads or have already detached their memory and killing them would not lead to memory freeing. That memory is only freed after exit_mm() has returned, however, and not when task->mm is first set to NULL. Clear TIF_MEMDIE after exit_mm()'s mmput() so that an oom killed process is no longer considered for oom kill, but only until exit_mm() has returned. This was fragile in the past because it relied on exit_notify() to be reached before no longer considering TIF_MEMDIE processes. Signed-off-by:
-
Li Zhong authored
It is possible for some platforms, such as powerpc to set HPAGE_SHIFT to 0 to indicate huge pages not supported. When this is the case, hugetlbfs could be disabled during boot time: hugetlbfs: disabling because there are no supported hugepage sizes Then in dissolve_free_huge_pages(), order is kept maximum (64 for 64bits), and the for loop below won't end: for (pfn = start_pfn; pfn < end_pfn; pfn += 1 << order) As suggested by Naoya, below fix checks hugepages_supported() before calling dissolve_free_huge_pages(). [rientjes@google.com: no legitimate reason to call dissolve_free_huge_pages() when !hugepages_supported()] Signed-off-by:
Li Zhong <zhong@linux.vnet.ibm.com> Acked-by:
-
David Rientjes authored
__GFP_NO_KSWAPD, once the way to determine if an allocation was for thp or not, has gained more users. Their use is not necessarily wrong, they are trying to do a memory allocation that can easily fail without disturbing kswapd, so the bit has gained additional usecases. This restructures the check to determine whether MIGRATE_SYNC_LIGHT should be used for memory compaction in the page allocator. Rather than testing solely for __GFP_NO_KSWAPD, test for all bits that must be set for thp allocations. This also moves the check to be done only after the page allocator is aborted for deferred or contended memory compaction since setting migration_mode for this case is pointless. Signed-off-by:
-
David Rientjes authored
try_set_zonelist_oom() and clear_zonelist_oom() are not named properly to imply that they require locking semantics to avoid out_of_memory() being reordered. zone_scan_lock is required for both functions to ensure that there is proper locking synchronization. Rename try_set_zonelist_oom() to oom_zonelist_trylock() and rename clear_zonelist_oom() to oom_zonelist_unlock() to imply there is proper locking semantics. At the same time, convert oom_zonelist_trylock() to return bool instead of int since only success and failure are tested. Signed-off-by:
-
David Rientjes authored
With memoryless node support being worked on, it's possible that for optimizations that a node may not have a non-NULL zonelist. When CONFIG_NUMA is enabled and node 0 is memoryless, this means the zonelist for first_online_node may become NULL. The oom killer requires a zonelist that includes all memory zones for the sysrq trigger and pagefault out of memory handler. Ensure that a non-NULL zonelist is always passed to the oom killer. [akpm@linux-foundation.org: fix non-numa build] Signed-off-by:
-
Wang Nan authored
This patch introduces zone_for_memory() to arch_add_memory() on sh to ensure new, higher memory added into ZONE_MOVABLE if movable zone has already setup. Signed-off-by:
Wang Nan <wangnan0@huawei.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "Mel Gorman" <mgorman@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by:
-
Wang Nan authored
This patch introduces zone_for_memory() to arch_add_memory() on powerpc to ensure new, higher memory added into ZONE_MOVABLE if movable zone has already setup. Signed-off-by:
-
Wang Nan authored
This patch introduces zone_for_memory() to arch_add_memory() on ia64 to ensure new, higher memory added into ZONE_MOVABLE if movable zone has already setup. Signed-off-by:
-
Wang Nan authored
This patch introduces zone_for_memory() to arch_add_memory() on x86_32 to ensure new, higher memory added into ZONE_MOVABLE if movable zone has already setup. Signed-off-by:
-
Wang Nan authored
This patch introduces zone_for_memory() to arch_add_memory() on x86_64 to ensure new, higher memory added into ZONE_MOVABLE if movable zone has already setup. Signed-off-by:
-
Wang Nan authored
This series of patches fixes a problem when adding memory in bad manner. For example: for a x86_64 machine booted with "mem=400M" and with 2GiB memory installed, following commands cause problem: # echo 0x40000000 > /sys/devices/system/memory/probe [ 28.613895] init_memory_mapping: [mem 0x40000000-0x47ffffff] # echo 0x48000000 > /sys/devices/system/memory/probe [ 28.693675] init_memory_mapping: [mem 0x48000000-0x4fffffff] # echo online_movable > /sys/devices/system/memory/memory9/state # echo 0x50000000 > /sys/devices/system/memory/probe [ 29.084090] init_memory_mapping: [mem 0x50000000-0x57ffffff] # echo 0x58000000 > /sys/devices/system/memory/probe [ 29.151880] init_memory_mapping: [mem 0x58000000-0x5fffffff] # echo online_movable > /sys/devices/system/memory/memory11/state # echo online> /sys/devices/system/memory/memory8/state # echo online> /sys/devices/system/memory/memory10/state # echo offline> /sys/devices/system/memory/memory9/state [ 30.558819] Offlined Pages 32768 # free total used free shared buffers cached Mem: 780588 18014398509432020 830552 0 0 51180 -/+ buffers/cache: 18014398509380840 881732 Swap: 0 0 0 This is because the above commands probe higher memory after online a section with online_movable, which causes ZONE_HIGHMEM (or ZONE_NORMAL for systems without ZONE_HIGHMEM) overlaps ZONE_MOVABLE. After the second online_movable, the problem can be observed from zoneinfo: # cat /proc/zoneinfo ... Node 0, zone Movable pages free 65491 min 250 low 312 high 375 scanned 0 spanned 18446744073709518848 present 65536 managed 65536 ... This series of patches solve the problem by checking ZONE_MOVABLE when choosing zone for new memory. If new memory is inside or higher than ZONE_MOVABLE, makes it go there instead. After applying this series of patches, following are free and zoneinfo result (after offlining memory9): bash-4.2# free total used free shared buffers cached Mem: 780956 80112 700844 0 0 51180 -/+ buffers/cache: 28932 752024 Swap: 0 0 0 bash-4.2# cat /proc/zoneinfo Node 0, zone DMA pages free 3389 min 14 low 17 high 21 scanned 0 spanned 4095 present 3998 managed 3977 nr_free_pages 3389 ... start_pfn: 1 inactive_ratio: 1 Node 0, zone DMA32 pages free 73724 min 341 low 426 high 511 scanned 0 spanned 98304 present 98304 managed 92958 nr_free_pages 73724 ... start_pfn: 4096 inactive_ratio: 1 Node 0, zone Normal pages free 32630 min 120 low 150 high 180 scanned 0 spanned 32768 present 32768 managed 32768 nr_free_pages 32630 ... start_pfn: 262144 inactive_ratio: 1 Node 0, zone Movable pages free 65476 min 241 low 301 high 361 scanned 0 spanned 98304 present 65536 managed 65536 nr_free_pages 65476 ... start_pfn: 294912 inactive_ratio: 1 This patch (of 7): Introduce zone_for_memory() in arch independent code for arch_add_memory() use. Many arch_add_memory() function simply selects ZONE_HIGHMEM or ZONE_NORMAL and add new memory into it. However, with the existance of ZONE_MOVABLE, the selection method should be carefully considered: if new, higher memory is added after ZONE_MOVABLE is setup, the default zone and ZONE_MOVABLE may overlap each other. should_add_memory_movable() checks the status of ZONE_MOVABLE. If it has already contain memory, compare the address of new memory and movable memory. If new memory is higher than movable, it should be added into ZONE_MOVABLE instead of default zone. Signed-off-by: -
Vladimir Davydov authored
This function is never called for memcg caches, because they are unmergeable, so remove the dead code. Signed-off-by:
Vladimir Davydov <vdavydov@parallels.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Reviewed-by:
Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
David Rientjes authored
Setting vm_dirty_bytes and dirty_background_bytes is not protected by any serialization. Therefore, it's possible for either variable to change value after the test in global_dirty_limits() to determine whether available_memory needs to be initialized or not. Always ensure that available_memory is properly initialized. Signed-off-by:
-
David Rientjes authored
Commit 9f1b868a ("mm: thp: khugepaged: add policy for finding target node") improved the previous khugepaged logic which allocated a transparent hugepages from the node of the first page being collapsed. However, it is still possible to collapse pages to remote memory which may suffer from additional access latency. With the current policy, it is possible that 255 pages (with PAGE_SHIFT == 12) will be collapsed remotely if the majority are allocated from that node. When zone_reclaim_mode is enabled, it means the VM should make every attempt to allocate locally to prevent NUMA performance degradation. In this case, we do not want to collapse hugepages to remote nodes that would suffer from increased access latency. Thus, when zone_reclaim_mode is enabled, only allow collapsing to nodes with RECLAIM_DISTANCE or less. There is no functional change for systems that disable zone_reclaim_mode. Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Bob Liu <bob.liu@oracle.com> Signed-off-by:
-
Wang Sheng-Hui authored
The gfp arg is not used in shmem_add_to_page_cache. Remove this unused arg. Signed-off-by:
Wang Sheng-Hui <shhuiw@gmail.com> Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
Paul Cassella authored
Add a comment describing the circumstances in which __lock_page_or_retry() will or will not release the mmap_sem when returning 0. Add comments to lock_page_or_retry()'s callers (filemap_fault(), do_swap_page()) noting the impact on VM_FAULT_RETRY returns. Add comments on up the call tree, particularly replacing the false "We return with mmap_sem still held" comments. Signed-off-by:
Paul Cassella <cassella@cray.com> Signed-off-by:
-
Mel Gorman authored
The fair zone allocation policy round-robins allocations between zones within a node to avoid age inversion problems during reclaim. If the first allocation fails, the batch counts are reset and a second attempt made before entering the slow path. One assumption made with this scheme is that batches expire at roughly the same time and the resets each time are justified. This assumption does not hold when zones reach their low watermark as the batches will be consumed at uneven rates. Allocation failure due to watermark depletion result in additional zonelist scans for the reset and another watermark check before hitting the slowpath. On UMA, the benefit is negligible -- around 0.25%. On 4-socket NUMA machine it's variable due to the variability of measuring overhead with the vmstat changes. The system CPU overhead comparison looks like 3.16.0-rc3 3.16.0-rc3 3.16.0-rc3 vanilla vmstat-v5 lowercost-v5 User 746.94 774.56 802.00 System 65336.22 32847.27 40852.33 Elapsed 27553.52 27415.04 27368.46 However it is worth noting that the overall benchmark still completed faster and intuitively it makes sense to take as few passes as possible through the zonelists. Signed-off-by: -
Mel Gorman authored
The purpose of numa_zonelist_order=zone is to preserve lower zones for use with 32-bit devices. If locality is preferred then the numa_zonelist_order=node policy should be used. Unfortunately, the fair zone allocation policy overrides this by skipping zones on remote nodes until the lower one is found. While this makes sense from a page aging and performance perspective, it breaks the expected zonelist policy. This patch restores the expected behaviour for zone-list ordering. Signed-off-by:
-
Mel Gorman authored
When kswapd is awake reclaiming, the per-cpu stat thresholds are lowered to get more accurate counts to avoid breaching watermarks. This threshold update iterates over all possible CPUs which is unnecessary. Only online CPUs need to be updated. If a new CPU is onlined, refresh_zone_stat_thresholds() will set the thresholds correctly. Signed-off-by:
-
Mel Gorman authored
zone->pages_scanned is a write-intensive cache line during page reclaim and it's also updated during page free. Move the counter into vmstat to take advantage of the per-cpu updates and do not update it in the free paths unless necessary. On a small UMA machine running tiobench the difference is marginal. On a 4-node machine the overhead is more noticable. Note that automatic NUMA balancing was disabled for this test as otherwise the system CPU overhead is unpredictable. 3.16.0-rc3 3.16.0-rc3 3.16.0-rc3 vanillarearrange-v5 vmstat-v5 User 746.94 759.78 774.56 System 65336.22 58350.98 32847.27 Elapsed 27553.52 27282.02 27415.04 Note that the overhead reduction will vary depending on where exactly pages are allocated and freed. Signed-off-by: -
Mel Gorman authored
The arrangement of struct zone has changed over time and now it has reached the point where there is some inappropriate sharing going on. On x86-64 for example o The zone->node field is shared with the zone lock and zone->node is accessed frequently from the page allocator due to the fair zone allocation policy. o span_seqlock is almost never used by shares a line with free_area o Some zone statistics share a cache line with the LRU lock so reclaim-intensive and allocator-intensive workloads can bounce the cache line on a stat update This patch rearranges struct zone to put read-only and read-mostly fields together and then splits the page allocator intensive fields, the zone statistics and the page reclaim intensive fields into their own cache lines. Note that the type of lowmem_reserve changes due to the watermark calculations being signed and avoiding a signed/unsigned conversion there. On the test configuration I used the overall size of struct zone shrunk by one cache line. On smaller machines, this is not likely to be noticable. However, on a 4-node NUMA machine running tiobench the system CPU overhead is reduced by this patch. 3.16.0-rc3 3.16.0-rc3 vanillarearrange-v5r9 User 746.94 759.78 System 65336.22 58350.98 Elapsed 27553.52 27282.02 Signed-off-by: -
Mel Gorman authored
This was formerly the series "Improve sequential read throughput" which noted some major differences in performance of tiobench since 3.0. While there are a number of factors, two that dominated were the introduction of the fair zone allocation policy and changes to CFQ. The behaviour of fair zone allocation policy makes more sense than tiobench as a benchmark and CFQ defaults were not changed due to insufficient benchmarking. This series is what's left. It's one functional fix to the fair zone allocation policy when used on NUMA machines and a reduction of overhead in general. tiobench was used for the comparison despite its flaws as an IO benchmark as in this case we are primarily interested in the overhead of page allocator and page reclaim activity. On UMA, it makes little difference to overhead 3.16.0-rc3 3.16.0-rc3 vanilla lowercost-v5 User 383.61 386.77 System 403.83 401.74 Elapsed 5411.50 5413.11 On a 4-socket NUMA machine it's a bit more noticable 3.16.0-rc3 3.16.0-rc3 vanilla lowercost-v5 User 746.94 802.00 System 65336.22 40852.33 Elapsed 27553.52 27368.46 This patch (of 6): The LRU insertion and activate tracepoints take PFN as a parameter forcing the overhead to the caller. Move the overhead to the tracepoint fast-assign method to ensure the cost is only incurred when the tracepoint is active. Signed-off-by: -
Chen Yucong authored
Until now, the reporting from trace-vmscan-postprocess.pl is not very useful because we cannot directly use this script for checking the file/anon ratio of scanning. This patch aims to report respectively the number of file/anon pages which were scanned/reclaimed by kswapd or direct-reclaim. Sample output is usually something like the following. Summary Direct reclaims: 8823 Direct reclaim pages scanned: 2438797 Direct reclaim file pages scanned: 1315200 Direct reclaim anon pages scanned: 1123597 Direct reclaim pages reclaimed: 446139 Direct reclaim file pages reclaimed: 378668 Direct reclaim anon pages reclaimed: 67471 Direct reclaim write file sync I/O: 0 Direct reclaim write anon sync I/O: 0 Direct reclaim write file async I/O: 0 Direct reclaim write anon async I/O: 4240 Wake kswapd requests: 122310 Time stalled direct reclaim: 13.78 seconds Kswapd wakeups: 25817 Kswapd pages scanned: 170779115 Kswapd file pages scanned: 162725123 Kswapd anon pages scanned: 8053992 Kswapd pages reclaimed: 129065738 Kswapd file pages reclaimed: 128500930 Kswapd anon pages reclaimed: 564808 Kswapd reclaim write file sync I/O: 0 Kswapd reclaim write anon sync I/O: 0 Kswapd reclaim write file async I/O: 36 Kswapd reclaim write anon async I/O: 730730 Time kswapd awake: 1015.50 seconds Signed-off-by:
Chen Yucong <slaoub@gmail.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Wang Sheng-Hui authored
vm_total_pages is calculated by nr_free_pagecache_pages(), which counts the number of pages which are beyond the high watermark within all zones. So vm_total_pages is not equal to total number of pages which the VM controls. Signed-off-by:
-
Cyrill Gorcunov authored
Otherwise we may not notice that pte was softdirty because pte_mksoft_dirty helper _returns_ new pte but doesn't modify the argument. In case if page fault happend on dirty filemapping the newly created pte may loose softdirty bit thus if a userspace program is tracking memory changes with help of a memory tracker (CONFIG_MEM_SOFT_DIRTY) it might miss modification of a memory page (which in worts case may lead to data inconsistency). Signed-off-by:
Pavel Emelyanov <xemul@parallels.com> Signed-off-by:
-
Yasuaki Ishimatsu authored
When limiting memory by mem= and ACPI DSDT table has PNP0C80, firmware_map_entrys of same memory range are allocated and memmap X sysfses which have same memory range are created as follows: # cat /sys/firmware/memmap/0/* 0x407ffffffff 0x40000000000 System RAM # cat /sys/firmware/memmap/33/* 0x407ffffffff 0x40000000000 System RAM # cat /sys/firmware/memmap/35/* 0x407ffffffff 0x40000000000 System RAM In this case, when hot-removing memory, kernel panic occurs, showing following call trace: BUG: unable to handle kernel paging request at 00000001003e000b IP: sysfs_open_file+0x46/0x2b0 PGD 203a89fe067 PUD 0 Oops: 0000 [#1] SMP ... Call Trace: do_dentry_open+0x1ef/0x2a0 finish_open+0x31/0x40 do_last+0x57c/0x1220 path_openat+0xc2/0x4c0 do_filp_open+0x4b/0xb0 do_sys_open+0xf3/0x1f0 SyS_open+0x1e/0x20 system_call_fastpath+0x16/0x1b The problem occurs as follows: When calling e820_reserve_resources(), firmware_map_entrys of all e820 memory map are allocated. And all firmware_map_entrys is added map_entries list as follows: map_entries -> +--- entry A --------+ -> ... | start 0x407ffffffff| | end 0x40000000000| | type System RAM | +--------------------+ After that, if ACPI DSDT table has PNP0C80 and the memory range is limited by mem=, the PNP0C80 is hot-added. Then firmware_map_entry of PNP0C80 is allocated and added map_entries list as follows: map_entries -> +--- entry A --------+ -> ... -> +--- entry B --------+ | start 0x407ffffffff| | start 0x407ffffffff| | end 0x40000000000| | end 0x40000000000| | type System RAM | | type System RAM | +--------------------+ +--------------------+ Then memmap 0 sysfs for entry B is created. After that, firmware_memmap_init() creates memmap sysfses of all firmware_map_entrys in map_entries list. As a result, memmap 33 sysfs for entry A and memmap 35 sysfs for entry B are created. But kobject of entry B has been used by memmap 0 sysfs. So when creating memmap 35 sysfs, the kobject is broken. If hot-removing memory, memmap 0 sysfs is destroyed and kobject of memmap 0 sysfs is freed. But the kobject can be accessed via memmap 35 sysfs. So when open memmap 35 sysfs, kernel panic occurs. This patch checks whether there is firmware_map_entry of same memory range in map_entries list and don't allocate firmware_map_entry of same memroy range. Signed-off-by:Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Yasuaki Ishimatsu authored
firmware_map_add_hotplug() calls firmware_map_find_entry_bootmem() to get free firmware_map_entry. But end arguments is not correct. So firmware_map_find_entry_bootmem() cannot not find firmware_map_entry. The patch passes the correct end argument to firmware_map_find_entry_bootmem(). Signed-off-by:
-
WANG Chao authored
Currently map_vm_area() takes (struct page *** pages) as third argument, and after mapping, it moves (*pages) to point to (*pages + nr_mappped_pages). It looks like this kind of increment is useless to its caller these days. The callers don't care about the increments and actually they're trying to avoid this by passing another copy to map_vm_area(). The caller can always guarantee all the pages can be mapped into vm_area as specified in first argument and the caller only cares about whether map_vm_area() fails or not. This patch cleans up the pointer movement in map_vm_area() and updates its callers accordingly. Signed-off-by:
WANG Chao <chaowang@redhat.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Jerome Marchand authored
Commit 71e3aac0 ("thp: transparent hugepage core") adds copy_pte_range prototype to huge_mm.h. I'm not sure why (or if) this function have been used outside of memory.c, but it currently isn't. This patch makes copy_pte_range() static again. Signed-off-by:
-
David Rientjes authored
They are unnecessary: "zero" can be used in place of "hugetlb_zero" and passing extra2 == NULL is equivalent to infinity. Signed-off-by:
Luiz Capitulino <lcapitulino@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by:
-
David Rientjes authored
Three different interfaces alter the maximum number of hugepages for an hstate: - /proc/sys/vm/nr_hugepages for global number of hugepages of the default hstate, - /sys/kernel/mm/hugepages/hugepages-X/nr_hugepages for global number of hugepages for a specific hstate, and - /sys/kernel/mm/hugepages/hugepages-X/nr_hugepages/mempolicy for number of hugepages for a specific hstate over the set of allowed nodes. Generalize the code so that a single function handles all of these writes instead of duplicating the code in two different functions. This decreases the number of lines of code, but also reduces the size of .text by about half a percent since set_max_huge_pages() can be inlined. Signed-off-by:
Davidlohr Bueso <davidlohr@hp.com> Signed-off-by:
-
Andi Kleen authored
When a hwpoison page is locked it could change state due to parallel modifications. The original compound page can be torn down and then this 4k page becomes part of a differently-size compound page is is a standalone regular page. Check after the lock if the page is still the same compound page. We could go back, grab the new head page and try again but it should be quite rare, so I thought this was safest. A retry loop would be more difficult to test and may have more side effects. The hwpoison code by design only tries to handle cases that are reasonably common in workloads, as visible in page-flags. I'm not really that concerned about handling this (likely rare case), just not crashing on it. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Acked-by:
-
Davidlohr Bueso authored
When returning from hugetlb_cow(), we always (1) put back the refcount for each referenced page -- always 'old', and 'new' if allocation was successful. And (2) retake the page table lock right before returning, as the callers expects. This logic can be simplified and encapsulated, as proposed in this patch. In addition to cleaner code, we also shave a few bytes off the instruction text: text data bss dec hex filename 28399 462 41328 70189 1122d mm/hugetlb.o-baseline 28367 462 41328 70157 1120d mm/hugetlb.o-patched Passes libhugetlbfs testcases. Signed-off-by:
-
