- 28 Mar, 2014 5 commits
-
-
Akash Goel authored
This patch Removes the VS_TIMER_DISPATCH bit enable in MI MODE reg for platforms > Gen6. VS_TIMER_DISPATCH bit enable was earlier required as a part of WA 'WaTimedSingleVertexDispatch', which is now applicable only to platforms < Gen7. v2: Enhancing the scope of the patch to full Gen7 (Chris) v3: Modifying the WA condition to the cover the applicable platforms, and adding the WA name in comments. (Ville) Signed-off-by:
Akash Goel <akash.goel@intel.com> Signed-off-by:
Sourab Gupta <sourab.gupta@intel.com> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> # ivb, hsw -Chris Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Deepak S authored
When we use different rps events for different platforms or due to wa, we might end up needing this logic in a lot of places. Instead of this let's use a variable in dev_priv to track the enabled PM interrupts. v2: Initialize pm_rps_events in intel_irq_init() (Ville). Signed-off-by:
Deepak S <deepak.s@linux.intel.com> Reviewed-by:
-
Daniel Vetter authored
Since commit 5c673b60 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Mar 7 20:34:46 2014 +0100 drm/i915: Don't enable display error interrupts from the start we don't enable underrun interrupts any more at takeover time. Unfortunately I've forgotten to also adjust the sw-side tracking. Since the code assumes that disabled pipes have underrun reporting enabled set the disable flag only on all pipes which are active at takeover time. Without this underrun reporting wasn't enabled correctly on the first modeset. Note that for fastboot this is another piece of state that needs to be fixed up by enabling the underrung reporting after watermarks have beend fixed up. On ivb/hsw an additional effect of this regression was that also all cpu crc reporting stopped working since the master error interrupt it shared across all pipes and sources. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76150 [danvet: Augment the code comment and polish the commit message a bit, as discussed with Jani.] Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Tested-by:
lu hua <huax.lu@intel.com> Signed-off-by:
-
Daniel Vetter authored
There's an entire pile of issues in here: - Use the main RING_HEAD register, not ACTHD. ACTHD points at the gtt offset of the batch buffer when a batch is executed. Semaphores are always emitted to the main ring, so we always want to look at that. - Mask the obtained HEAD pointer with the actual ring size, which is much smaller. Together with the above issue this resulted us in trying to dereference a pointer way outside of the ring mmio mapping. The resulting invalid access in interrupt context (hangcheck is executed from timers) lead to a full blown kernel panic. The fbcon panic handler then tried to frob our driver harder, resulting in a full machine hang at least on my snb here where I've stumbled over this. - Handle ring wrapping correctly and be a bit more explicit about how many dwords we're scanning. We probably should also scan more than just 4 ... - Space out some of teh computations for readability. This reduces hard-hangs on my snb here. Mika and QA both say that it doesn't completel remove them, but at least for me it's a clear improvement in stability. Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Chris Wilson <chris@chris-wilson.co.uk> References: https://bugs.freedesktop.org/show_bug.cgi?id=74100Reviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by:
-
Daniel Vetter authored
With the recent addition of locking checks in commit 62ff94a5 Author: Daniel Vetter <daniel.vetter@ffwll.ch> AuthorDate: Thu Jan 23 22:18:47 2014 +0100 drm/crtc-helper: remove LOCKING from kerneldoc drm_add_edid_modes started to WARN about the mode_config.mutex not being held in the lvds and dp initialization code. Now since this is init code locking is fairly redudant if it wouldn't be for the drm core registering sysfs files a bit early. And the locking WARNINGs nicely enforce that indeed all access to the mode lists are properly protected. And a full audit shows that only i915 and gma500 touch the modes lists at init time. Hence I've opted to wrap up this entire mode detection sequence for fixed panels with the mode_config mutex for both lvds and edp outputs. Signed-off-by:
-
- 21 Mar, 2014 3 commits
-
-
Chris Wilson authored
It is important that the user is fully aware that the seemingly atomic read/write of a 64-bit value from MMIO space, may in fact be 2 separate operations of 32-bits. This can lead to hilarity, such as commit d18b9619 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Jul 10 13:36:23 2013 +0100 drm/i915: Fix incoherence with fence updates on Sandybridge+ Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Jani Nikula authored
intel_sdvo_get_trained_inputs() returns a bool, check the status accordingly. Signed-off-by:
-
Chris Wilson authored
On non-LLC platforms, when changing the cache level of an object, we may need to unbind it so that prefetching across page boundaries does not cross into a different memory domain. This requires us to unbind conflicting vma, but we did so iterating over the objects vma in an unsafe manner (as the list was being modified as we iterated). The regression was introduced in commit 3089c6f2 Author: Ben Widawsky <ben@bwidawsk.net> Date: Wed Jul 31 17:00:03 2013 -0700 drm/i915: make caching operate on all address spaces apparently as far back as v3.12-rc1, but it has only just begun to trigger real world bug reports. Reported-and-tested-by:
Nikolay Martynov <mar.kolya@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76384Signed-off-by:
-
- 20 Mar, 2014 9 commits
-
-
Sagar Kamble authored
With this patch we allow larger cursor planes of sizes 128x128 and 256x256. v2: Added more precise check on size while setting cursor plane. v3: Changes related to restructuring cursor size restrictions and DRM_DEBUG usage. v4: Indentation related changes for setting cursor control and implementing DRM_CAP_CURSOR_WIDTH and DRM_CAP_CURSOR_HEIGHT Testcase: igt/kms_cursor_crc Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
G, Pallavi <pallavi.g@intel.com> Signed-off-by:
Sagar Kamble <sagar.a.kamble@intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Chris Wilson authored
The point of this measure is to gauge why a process has a lot of gem objects in uses and why. Especially for compositors it's interesting to know whether it's a leak of private objects or just a lot of use from buffers shared with clients. Signed-off-by:
Ben Widawsky <ben@bwidawsk.net> [danvet: Add a bit of commit message flesh to address Ben's comment.] Signed-off-by:
-
Chris Wilson authored
The idea of printing objects used by each process is to judge how each process is using them. This means that we need to evaluate whether the object is bound for that particular process, rather than just whether it is bound into the global GTT. v2: Restore the non-full-ppgtt path for simplicity as we may not even create vma with older hardware. v3: Tweak handling of global entries and default context entries. Signed-off-by: -
Ben Widawsky authored
With the renamed RPS struct members, it's easier to skip the local variables which no longer clarify anything, and if anything just make the code harder to read. The real motivation for this patch is actually the next patch, which attempts to consolidate some of the functionality. Cc: Jeff McGee <jeff.mcgee@intel.com> Signed-off-by:
-
Ben Widawsky authored
The values created at initialization must always exist to use the interface. Reading them again is confusing, and pointless. More cleanups are coming in the next patch. Since I am not 100% certain, moreover on BYT, (though I am extremely close to that) that there is no need to leave the MMIO here, I wanted to make it a separate patch for the bisectable 'just-in-case' Signed-off-by:
-
Ben Widawsky authored
The names of the struct members for RPS are stupid. Every time I need to do anything in this code I have to spend a significant amount of time to remember what it all means. By renaming the variables (and adding the comments) I hope to clear up the situation. Indeed doing this make some upcoming patches more readable. I've avoided ILK because it's possible that the naming used for Ironlake matches what is in the docs. I believe the ILK power docs were never published, and I am too lazy to dig them up. v2: leave rp0, and rp1 in the names. It is useful to have these limits available at times. min_freq and max_freq (which may be equal to rp0, or rp1 depending on the platform) represent the actual HW min and max. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Ben Widawsky authored
this leaves a temporarily awkward min_delay (the soft limit) with the new min_freq (the hardware limit). It's fixed in the next patch. Signed-off-by:
-
Ben Widawsky authored
Introduced: commit b8a5ff8d Author: Jeff McGee <jeff.mcgee@intel.com> Date: Tue Feb 4 11:37:01 2014 -0600 drm/i915: Update rps interrupt limits Cc: Jeff McGee <jeff.mcgee@intel.com> Signed-off-by:
-
Ben Widawsky authored
The existing code (which I changed last) was very convoluted. I believe it was attempting to skip the overclock portion if the previous pcode write failed. When I last touched the code, I was preserving this behavior. There is some benefit to doing it that way in that if the first pcode access fails, the later is likely invalid. Having a bit more confidence in my understanding of how things work, I now feel it's better to have clear, readable, code than to try to skip over this one operation in an unusual case. Signed-off-by:
-
- 19 Mar, 2014 21 commits
-
-
Paulo Zanoni authored
Function intel_init_runtime_pm is supposed to start allowing runtime PM from that point, but it's called very late on the driver initialization code, to prevent the driver from trying to suspend while still initializing. The problem is that variables are accessed earlier than that, so initalize them at intel_pm_setup, which is supposed to be the correct place. Notice that this shouldn't fix any specific bugs because dev_priv is zeroed when allocated, so the value is already correct right from the start. v2: - Rebase. Reviewed-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Paulo Zanoni authored
Now that PC8 got much simpler, there are less things to document. Also, runtime PM already has a nice documentation, so we don't need to re-explain it on our driver. v2: - Rebase. - Fix typo (Jesse). Reviewed-by: -
Paulo Zanoni authored
After we removed all the intermediate abstractions, we can rename these functions to just hsw_{en,dis}able_pc8. v2: - Rebase. Reviewed-by: -
Paulo Zanoni authored
The only remaining field of the struct was the lock, which was useless. v2: - Rebase. Reviewed-by:
-
Paulo Zanoni authored
When other platforms add runtime PM support they will also need to disable interrupts, so move the variable to the runtime PM struct. Also notice that the longer-term goal is to completely kill the regsave struct, and I even have patches for that. v2: - Rebase. v3: - Rebase. Reviewed-by:
-
Paulo Zanoni authored
It was just being used on debugfs and on a WARN inside hsw_set_power_well. But now that we PC8 is part of runtime PM and we get/put runtime PM when we get/put any power domain, we shouldn't need the WARN anymore. v2: - Rebase. v3: - Rebase. Reviewed-by:
-
Paulo Zanoni authored
Because we already get/put runtime PM every time we get/put any power domain, and now PC8 and runtime PM are the same thing. With this, we can also now kill the hsw_{en,dis}able_package_c8 functions. v2: - Rebase. v3: - Rebase. v4: - Rebase. Reviewed-by: -
Paulo Zanoni authored
Because we merged the PC8 and runtime PM features, so calling intel_runtime_pm_get now has the same meaning, and we plan to just remove hsw_disable_package_c8 for this exact reason. My first patch tried to completely kill intel_aux_display_runtime_get/put, because I was assuming that whoever needed more than just runtime PM would have to get the appropriate power domain instead of that, but it seems some people still want the intel_aux_display_runtime_get abstraction, so keep it until someone else tries to replace it with the more-standard power domain calls. Signed-off-by:
-
Paulo Zanoni authored
We already get runtime PM references, and PC8 is now part of runtime PM, so this is enough. v2: - Rebase. Reviewed-by:
-
Paulo Zanoni authored
After the latest changes, the indirection is useless. Reviewed-by:
-
Paulo Zanoni authored
Since after the latest patches it's only being used to prevent getting/putting the runtime PM refcount. Reviewed-by:
-
Paulo Zanoni authored
... instead of PC8 references. Now that both are the same thing and we are killing PC8, just get the runtime PM reference. Reviewed-by:
-
Paulo Zanoni authored
The requirements_met variable was used to track two things: enabled CRTCs and the power well. After the latest chagnes, we get a runtime PM reference whenever we get any of the power domains, and we get power domains when we enable CRTCs or the power well, so we should already be covered, not needing this specific tracking. v2: - Rebase. v3: - Rebase. Signed-off-by:
-
Paulo Zanoni authored
Any power domain will require the HW to be in PCI D0 state, so just do the simple thing. Dear maintainer: since intel_display_power_put() and intel_display_power_get() are almost identical, git-am has failed apply the patch on my local machine once: it added both chunks to put(), instead of one chunk to get() and another to put(). When you apply this patch to your tree, please check if it is correct. v2: - Add the warning above. v3: - Rebase. Reviewed-by:
-
Paulo Zanoni authored
Currently, when our driver becomes idle for i915.pc8_timeout (default: 5s) we enable PC8, so we save some power, but not everything we can. Then, while PC8 is enabled, if we stay idle for more autosuspend_delay_ms (default: 10s) we'll enter runtime PM and put the graphics device in D3 state, saving even more power. The two features are separate things with increasing levels of power savings, but if we disable PC8 we'll never get into D3. While from the modularity point of view it would be nice to keep these features as separate, we have reasons to merge them: - We are not aware of anybody wanting a "PC8 without D3" environment. - If we keep both features as separate, we'll have to to test both PC8 and PC8+D3 code paths. We're already having a major pain to make QA do automated testing of just one thing, testing both paths will cost even more. - Only Haswell+ supports PC8, so if we want to add runtime PM support to, for example, IVB, we'll have to copy some code from the PC8 feature to runtime PM, so merging both features as a single thing will make it easier for enabling runtime PM on other platforms. This patch only does the very basic steps required to have PC8 and runtime PM merged on a single feature: the next patches will take care of cleaning up everything. v2: - Rebase. v3: - Rebase. - Fully remove the deprecated i915 params since Daniel doesn't consider them as part of the ABI. v4: - Rebase. - Fix typo in the commit message. v5: - Rebase, again. - Add a huge comment explaining the different forcewake usage (Chris, Daniel). - Use open-coded forcewake functions (Daniel). Signed-off-by: -
Paulo Zanoni authored
When we merge PC8 and runtime PM, these new functions are going to be called by the runtime suspend/resume functions, and their callers are going to be removed. v2: - Rebase Reviewed-by: Imre Deak <imre.deak@intel.com> (v1) Signed-off-by:
-
Daniel Vetter authored
Conflicts: drivers/gpu/drm/i915/intel_dp.c A bit a mess with reverts which differe in details between -fixes and -next and some other unrelated shuffling. Signed-off-by: -
Matt Roper authored
The name 'update_plane' was used both for the primary plane functions in intel_display.c and the sprite/overlay functions in intel_sprite.c. Rename the primary plane functions to 'update_primary_plane' to avoid confusion. On a similar note, intel_display.c already had a function called intel_disable_primary_plane() that programs the hardware to disable a pipe's primary plane. When we hook up primary planes through the DRM plane interface, one of the natural handler names will be intel_primary_plane_disable(), which is very similar. To avoid confusion, rename the existing intel_disable_primary_plane() to intel_disable_primary_hw_plane() to make the two names a little more distinct. Cc: Intel Graphics Development <intel-gfx@lists.freedesktop.org> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> [danvet: Fix up conflicts.] Signed-off-by:
-
Jesse Barnes authored
So don't try to allocate and program it, we're only fooling ourselves. Reported-by:
"Chang, Junxiao" <junxiao.chang@intel.com> Signed-off-by:
-
Ben Widawsky authored
Apparently it is wiped out from under us, and we get some really fun caching artifacts upon resume (it seems to be WB for all types by default). Reported-by:
James Ausmus <james.ausmus@intel.com> Signed-off-by:
Timo Aaltonen <timo.aaltonen@canonical.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Steven Rostedt authored
The TP_printk() should never dereference any pointers, because the ring buffer can be read at some unknown time in the future. If a device no longer exists, it can cause a kernel oops. This also makes this event useless when saving the ring buffer in userspaces tools such as perf and trace-cmd. The i915_gem_evict_vm dereferences the vm pointer which may also not exist when the ring buffer is read sometime in the future. Link: http://lkml.kernel.org/r/1395095198-20034-3-git-send-email-artagnon@gmail.comReported-by:
Ramkumar Ramachandra <artagnon@gmail.com> Cc: stable@vger.kernel.org # 3.13+ Fixes: bcccff84 "drm/i915: trace vm eviction instead of everything" Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> [danvet: Try to make it actually compile] Signed-off-by:
-
- 18 Mar, 2014 2 commits
-
-
Damien Lespiau authored
When compiling on 32bits, I have the following warning: drivers/gpu/drm/i915/i915_cmd_parser.c:405:4: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 7 has type ‘int’ [-Wformat=] DRM_DEBUG_DRIVER("CMD: Command length exceeds batch length: 0x%08X length=%d batchlen=%ld\n", The ptrdiff_t type has its own modifier: 't'. Cc: Brad Volkin <bradley.d.volkin@intel.com> Signed-off-by:Damien Lespiau <damien.lespiau@intel.com> Reviewed-by:
Brad Volkin <bradley.d.volkin@intel.com> Signed-off-by:
-
Damien Lespiau authored
This function is only used on ILK+, so rename it accordingly. Signed-off-by:
-
