To fix these checkpatch complaints:

WARNING: suspect code indent for conditional statements (8, 24)
+       if (eth_proto & (MLX5E_PROT_MASK(MLX5E_10GBASE_SR)
[...]
+                       return PORT_FIBRE;
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

To fix these checkpatch complaints:

WARNING: Missing a blank line after declarations
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

To fix these checkpatch complaints:

CHECK: Blank lines aren't necessary after an open brace '{'
CHECK: Blank lines aren't necessary before a close brace '}'
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Add outbound_pci_buffer_overflow to ethtool output for monitoring the
number of packets that were dropped due to lack of PCIe buffers on
receive path from NIC port toward the host(s).

This counter is valid only in case that tx_overflow_buffer_pkt is
supported in MCAM enhanced features.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

rx_buffer_passed_thres_phy - The number of events where the port RX
buffer has passed a fullness threshold.

rx_buffer_full_phy - The number of events where the port RX buffer has
reached 100% fullness.
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Add capability bit in PCAM register and counters to PPCNT register.
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

outbound_pci_stalled_rd - The percentage of time within the last second
that the NIC had outbound non-posted read requests but could not perform
the operation due to insufficient non-posted credits.

outbound_pci_stalled_wr - The percentage of time within the
last second that the NIC had outbound posted writes requests but could
not perform the operation due to insufficient posted credits.

outbound_pci_stalled_rd_events - The number of events where
outbound_pci_stalled_rd was above the threshold.

outbound_pci_stalled_wr_events - The number of events where
outbound_pci_stalled_wr was above the threshold.
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Add capability bit in MCAM register and counters to MPCNT register.
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Add support for "ethtool DEVNAME" over ipoib ports,
Display standard port information for IPoIB netdevices using ethtool
For example:
$ ethtool ib2
> Settings for ib2:
        Supported ports: [ ]
        Supported link modes:   Not reported
        Supported pause frame use: No
        Supports auto-negotiation: No
        Advertised link modes:  Not reported
        Advertised pause frame use: No
        Advertised auto-negotiation: No
        Speed: 100000Mb/s
        Duplex: Full
        Port: Other
        PHYAD: 0
        Transceiver: internal
        Auto-negotiation: off
        Link detected: yes
Signed-off-by: Shalom Lagziel <shaloml@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Printing an enhanced IPoIB device information using
"ethtool -i DEVNAME", prints the low level driver name: mlx5_core.
This commit changes the name to mlx5_core [ib_ipoib], to include the
ipoib device driver infromation.

Fixes: 076b0936 ("net/mlx5e: IPoIB, Add ethtool support")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Upon interface up/down, driver will send PAOS (Ports Administrative and
Operational Status Register) in order to inform the Firmware on the
desired status of the port by the driver.

Since now we might change physical link status on mlx5e_open/close,
logical VF representor should not use mlx5e_open/close ndos as is, and
should call the logical version mlx5e_open/closed_locked.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
BPF inline improvements

First one makes htab inlining more robust wrt future jits and
second one inlines map in map lookups through map_gen_lookup()
callback.

v1 -> v2:
  - BITS_PER_LONG guard in patch 1
  - BPF_EMIT_CALL is on __htab_map_lookup_elem
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Avoid two successive functions calls for the map in map lookup, first
is the bpf_map_lookup_elem() helper call, and second the callback via
map->ops->map_lookup_elem() to get to the map in map implementation.
Implementation inlines array and htab flavor for map in map lookups.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 9015d2f5 ("bpf: inline htab_map_lookup_elem()") was
making the assumption that a direct call emission to the function
__htab_map_lookup_elem() will always work out for JITs.

This is currently true since all JITs we have are for 64 bit archs,
but in case of 32 bit JITs like upcoming arm32, we get a NULL pointer
dereference when executing the call to __htab_map_lookup_elem()
since passed arguments are of a different size (due to pointer args)
than what we do out of BPF. Guard and thus limit this for now for
the current 64 bit JITs only.
Reported-by: Shubham Bansal <illusionist.neo@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Martin KaFai Lau says:

====================
bpf: Allow selecting numa node during map creation

This series allows user to pick the numa node during map creation.
The first patch has the details
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch makes the needed changes to allow each process of
the INNER_LRU_HASH_PREALLOC test to provide its numa node id
when creating the lru map.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current map creation API does not allow to provide the numa-node
preference.  The memory usually comes from where the map-creation-process
is running.  The performance is not ideal if the bpf_prog is known to
always run in a numa node different from the map-creation-process.

One of the use case is sharding on CPU to different LRU maps (i.e.
an array of LRU maps).  Here is the test result of map_perf_test on
the INNER_LRU_HASH_PREALLOC test if we force the lru map used by
CPU0 to be allocated from a remote numa node:

[ The machine has 20 cores. CPU0-9 at node 0. CPU10-19 at node 1 ]

># taskset -c 10 ./map_perf_test 512 8 1260000 8000000
5:inner_lru_hash_map_perf pre-alloc 1628380 events per sec
4:inner_lru_hash_map_perf pre-alloc 1626396 events per sec
3:inner_lru_hash_map_perf pre-alloc 1626144 events per sec
6:inner_lru_hash_map_perf pre-alloc 1621657 events per sec
2:inner_lru_hash_map_perf pre-alloc 1621534 events per sec
1:inner_lru_hash_map_perf pre-alloc 1620292 events per sec
7:inner_lru_hash_map_perf pre-alloc 1613305 events per sec
0:inner_lru_hash_map_perf pre-alloc 1239150 events per sec  #<<<

After specifying numa node:
># taskset -c 10 ./map_perf_test 512 8 1260000 8000000
5:inner_lru_hash_map_perf pre-alloc 1629627 events per sec
3:inner_lru_hash_map_perf pre-alloc 1628057 events per sec
1:inner_lru_hash_map_perf pre-alloc 1623054 events per sec
6:inner_lru_hash_map_perf pre-alloc 1616033 events per sec
2:inner_lru_hash_map_perf pre-alloc 1614630 events per sec
4:inner_lru_hash_map_perf pre-alloc 1612651 events per sec
7:inner_lru_hash_map_perf pre-alloc 1609337 events per sec
0:inner_lru_hash_map_perf pre-alloc 1619340 events per sec #<<<

This patch adds one field, numa_node, to the bpf_attr.  Since numa node 0
is a valid node, a new flag BPF_F_NUMA_NODE is also added.  The numa_node
field is honored if and only if the BPF_F_NUMA_NODE flag is set.

Numa node selection is not supported for percpu map.

This patch does not change all the kmalloc.  F.e.
'htab = kzalloc()' is not changed since the object
is small enough to stay in the cache.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Trivial fix to spelling mistake in a netdev_info message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Trival fix to spelling mistakes:

firware -> firmware
invald -> invalid
mutilcast -> multicast
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Arvind Yadav says:

====================
constify net eisa_device_id

eisa_device_id are not supposed to change at runtime. All functions
working with eisa_device_id provided by <linux/eisa.h> work with
const eisa_device_id. So mark the non-const structs as const.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

eisa_device_id are not supposed to change at runtime. All functions
working with eisa_device_id provided by <linux/eisa.h> work with
const eisa_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

eisa_device_id are not supposed to change at runtime. All functions
working with eisa_device_id provided by <linux/eisa.h> work with
const eisa_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

eisa_device_id are not supposed to change at runtime. All functions
working with eisa_device_id provided by <linux/eisa.h> work with
const eisa_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

eisa_device_id are not supposed to change at runtime. All functions
working with eisa_device_id provided by <linux/eisa.h> work with
const eisa_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

eisa_device_id are not supposed to change at runtime. All functions
working with eisa_device_id provided by <linux/eisa.h> work with
const eisa_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
nfp: add basic ethtool callbacks to representors

This set extends the basic ethtool functionality to representor
netdevs.  I start with providing link state via ethtool and then
move on to functions such as driver information, statistics and
FW log dump.  The series contains a number of clean ups to the
ethtool stats code too, some of the logic is simplified by making
better use of the nfp_port abstraction.  The stats we expose on
representors are only the PCIe and MAC port statistics firmware
maintains for us.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We were reusing skb pointer when reading page frag, since ring
entries contain a union of a skb and frag pointer.  This can
be confusing to people reading the code.  Refactor the code
to read frag pointer directly.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Data and control vNICs currently use the same area name and
error message.  This could lead to confusion.  Make sure
the error message says "ctrl" in case of control and the
data area is called "nfp.bar0".
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Representors may be associated with both VFs or more importantly
with physical ports.  Allow vNIC and MAC statistics to be read
with ethtool -S on representors.  In case of vNICs we reuse
the vNIC statistic helper, we just need to swap RX and TX to
give statistics the "switch perspective."
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simplify the statistics handling code by keeping pointer to vNIC's
config memory in nfp_port.  Note that this is referring to the
representor side of vNICs, vNIC side has the pointer in nfp_net.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add reporting of MAC statistics in ethtool.  MAC statistics
are read out from the MAC IP and accumulated by application
FW, therefore their presence depends on the application FW.

Add missing defines and string names for the statistics and
dump them in ethtool -S.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Store pointer to device memory containing MAC statistics
in nfp_port.  This simplifies representor code and will
be used to dump those statistics in ethtool as well.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation for reporting vNIC HW stats on representors
split handling of the SW and HW stats in ethtool -S.
Representors don't have SW stats (since vNIC is assigned
to the VM).

Remove the questionable defines which assume nn variable
exists in the scope.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a helper for printing ethtool strings and advancing the
pointer correctly.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We have been recently called out as a bad example for reporting
standard netdev statistics as part of ethtool.  Fix that :)

Removing standard statistics allows us to simplify the structure
holding definitions since we no longer have to mux different types
of statistics.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Users should be able to dump the management FW logs on any
of the driver's netdevs.  Make the code only depend on the
nfp_app and share it between vNICs and representors.

Storing the dump flag is simply dropped for now, since we
only support the argument being set to 0.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend representors' ethtool ops to show basic info like firmware
version, driver version, and driver name.

While at it don't set drvinfo.n_stats and drvinfo.regdump_len,
core will invoke appropriate handlers to get those.

A helper is added to turn a netdev into nfp_app for convenience.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Start linking ethtool ops to representors.  Begin by adding
a separate ops structure and providing link state.  Next
patches will convert appropriate functions to only use nfp_port,
which will make them reusable on representors.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Stephen Hemminger says:

====================
net: sysfs related cleanups

Network sysfs infrastructure changes. Mostly related to using ro_after_init
to make function tables immutable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>