- 29 Dec, 2018 15 commits
-
-
Jörgen Storvist authored
commit 28a86092 upstream. Added USB serial option driver support for Telit LN940 series cellular modules. Covering both QMI and MBIM modes. usb-devices output (0x1900): T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1900 Rev=03.10 S: Manufacturer=Telit S: Product=Telit LN940 Mobile Broadband S: SerialNumber=0123456789ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option usb-devices output (0x1901): T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 20 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1901 Rev=03.10 S: Manufacturer=Telit S: Product=Telit LN940 Mobile Broadband S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim Signed-off-by:
Jörgen Storvist <jorgen.storvist@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jörgen Storvist authored
commit 30360224 upstream. Added USB serial option driver support for Fibocom NL668 series cellular modules. Reserved USB endpoints 4, 5 and 6 for network + ADB interfaces. usb-devices output (QMI mode) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1508 ProdID=1001 Rev=03.18 S: Manufacturer=Nodecom NL668 Modem S: Product=Nodecom NL668-CN Modem S: SerialNumber= C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) usb-devices output (ECM mode) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1508 ProdID=1001 Rev=03.18 S: Manufacturer=Nodecom NL668 Modem S: Product=Nodecom NL668-CN Modem S: SerialNumber= C: #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) Signed-off-by:
-
Jörgen Storvist authored
commit cc6730df upstream. Added USB serial option driver support for Simcom SIM7500/SIM7600 series cellular modules exposing MBIM interface (VID 0x1e0e,PID 0x9003) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 14 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=9003 Rev=03.18 S: Manufacturer=SimTech, Incorporated S: Product=SimTech, Incorporated S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 6 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim Signed-off-by:
-
Tore Anderson authored
commit d57ec3c8 upstream. The HP lt4132 is a rebranded Huawei ME906s-158 LTE modem. The interface with protocol 0x16 is "CDC ECM & NCM" according to the *.inf files included with the Windows driver. Attaching the option driver to it doesn't result in a /dev/ttyUSB* device being created, so I've excluded it. Note that it is also excluded for corresponding Huawei-branded devices, cf. commit d544db29 ("USB: support new huawei devices in option.c"). T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=ff MxPS=64 #Cfgs= 3 P: Vendor=03f0 ProdID=a31d Rev=01.02 S: Manufacturer=HP Inc. S: Product=HP lt4132 LTE/HSPA+ 4G Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=2mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=10 Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=13 Driver=option I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=12 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=06 Prot=16 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=14 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=1b Driver=option T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=ff MxPS=64 #Cfgs= 3 P: Vendor=03f0 ProdID=a31d Rev=01.02 S: Manufacturer=HP Inc. S: Product=HP lt4132 LTE/HSPA+ 4G Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=2mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=10 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=13 Driver=option I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=12 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=14 Driver=option I: If#=0x6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=1b Driver=option T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=ff MxPS=64 #Cfgs= 3 P: Vendor=03f0 ProdID=a31d Rev=01.02 S: Manufacturer=HP Inc. S: Product=HP lt4132 LTE/HSPA+ 4G Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 3 Cfg#= 3 Atr=a0 MxPwr=2mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=14 Driver=option Signed-off-by:
Tore Anderson <tore@fud.no> Cc: stable@vger.kernel.org [ johan: drop id defines ] Signed-off-by:
-
Jörgen Storvist authored
commit 70a7444c upstream. Added USB serial option driver support for GosunCn ZTE WeLink ME3630 series cellular modules for USB modes ECM/NCM and MBIM. usb-devices output MBIM mode: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=0602 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim usb-devices output ECM/NCM mode: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=1476 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether Signed-off-by:
-
Nicolas Saenz Julienne authored
commit 2419f30a upstream. As commented in the struct's definition there shouldn't be anything underneath its 'priv[0]' member as it would break some macros. The patch converts the broken_suspend into a bit-field and relocates it next to to the rest of bit-fields. Fixes: a7d57abc ("xhci: workaround CSS timeout on AMD SNPS 3.0 xHC") Reported-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Mathias Nyman authored
commit 45f750c1 upstream. The code to prevent a bus suspend if a USB3 port was still in link training also reacted to USB2 port polling state. This caused bus suspend to busyloop in some cases. USB2 polling state is different from USB3, and should not prevent bus suspend. Limit the USB3 link training state check to USB3 root hub ports only. The origial commit went to stable so this need to be applied there as well Fixes: 2f31a67f ("usb: xhci: Prevent bus suspend if a port connect change or polling state is detected") Cc: stable@vger.kernel.org Signed-off-by:
-
Hui Peng authored
commit 5146f95d upstream. The function hso_probe reads if_num from the USB device (as an u8) and uses it without a length check to index an array, resulting in an OOB memory read in hso_probe or hso_get_config_data. Add a length check for both locations and updated hso_probe to bail on error. This issue has been assigned CVE-2018-19985. Reported-by:
Hui Peng <benquike@gmail.com> Reported-by:
Mathias Payer <mathias.payer@nebelwelt.net> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dan Carpenter authored
commit 2d204ee9 upstream The "le32_to_cpu(rsp->OutputOffset) + *plen" addition can overflow and wrap around to a smaller value which looks like it would lead to an information leak. Fixes: 4a72dafa ("SMB2 FSCTL and IOCTL worker function") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Aurelien Aptel <aaptel@suse.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jiri Olsa authored
[ Upstream commit a2015516 ] We need to synthesize events first, because some features works on top of them (on report side). Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Tested-by:
Stephane Eranian <eranian@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180314092205.23291-1-jolsa@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Bart Van Assche authored
commit 14d15c2b upstream BUG: KASAN: use-after-free in srpt_set_enabled+0x1a9/0x1e0 [ib_srpt] Read of size 4 at addr ffff8801269d23f8 by task check/29726 CPU: 4 PID: 29726 Comm: check Not tainted 4.18.0-rc2-dbg+ #4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xa4/0xf5 print_address_description+0x6f/0x270 kasan_report+0x241/0x360 __asan_load4+0x78/0x80 srpt_set_enabled+0x1a9/0x1e0 [ib_srpt] srpt_tpg_enable_store+0xb8/0x120 [ib_srpt] configfs_write_file+0x14e/0x1d0 [configfs] __vfs_write+0xd2/0x3b0 vfs_write+0x101/0x270 ksys_write+0xab/0x120 __x64_sys_write+0x43/0x50 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f235cfe6154 Fixes: aaf45bd8 ("IB/srpt: Detect session shutdown reliably") Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Richard Weinberger authored
commit 00ee8b60 upstream We have to account the name of the symlink and not the target length. Fixes: ca7f85be ("ubifs: Add support for encrypted symlinks") Cc: <stable@vger.kernel.org> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Daniel Mack authored
commit 747df197 upstream The ESD watchdog code in sta32x_watchdog() dereferences the pointer which is never assigned. This is a regression from a1be4cea ("ASoC: sta32x: Convert to direct regmap API usage.") which went unnoticed since nobody seems to use that ESD workaround. Fixes: a1be4cea ("ASoC: sta32x: Convert to direct regmap API usage.") Signed-off-by:
Daniel Mack <daniel@zonque.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Mikulas Patocka authored
[ Upstream commit b88aef36 ] If __blkdev_issue_discard is in progress and a device mapper device is reloaded with a table that doesn't support discard, q->limits.max_discard_sectors is set to zero. This results in infinite loop in __blkdev_issue_discard. This patch checks if max_discard_sectors is zero and aborts with -EOPNOTSUPP. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Tested-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Jens Axboe authored
[ Upstream commit af097f5d ] Don't build discards bigger than what the user asked for, if the user decided to limit the size by writing to 'discard_max_bytes'. Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
-
- 21 Dec, 2018 25 commits
-
-
Greg Kroah-Hartman authored
-
Nicolas Schichan authored
emit_ldx_r() and emit_a32_mov_i() were both using TMP_REG_1 and clashing with each other. Using TMP_REG_2 in emit_ldx_r() fixes the issue. Fixes: ec19e02b ("ARM: net: bpf: fix LDX instructions") Cc: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Nicolas Schichan <nschichan@freebox.fr> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Trent Piepho authored
[ Upstream commit cd7f3a24 ] In order to read correctly from asynchronously updated RTC registers, it's necessary to read repeatedly until their values do not change from read to read. It's also necessary to wait for three RTC clock ticks for certain operations. There are no timeouts in this code and these operations could possibly loop forever. To avoid kernel hangs, put in timeouts. The iMX7d can be configured to stop the SRTC on a tamper event, which will lockup the kernel inside this driver as described above. These hangs can happen when running under qemu, which doesn't emulate the SNVS RTC, though currently the driver will refuse to load on qemu due to a timeout in the driver probe method. It could also happen if the SRTC block where somehow placed into reset or the slow speed clock that drives the SRTC counter (but not the CPU) were to stop. The symptoms on a two core iMX7d are a work queue hang on rtc_timer_do_work(), which eventually blocks a systemd fsnotify operation that triggers a work queue flush, causing systemd to hang and thus causing all services that should be started by systemd, like a console getty, to fail to start or stop. Also optimize the wait code to wait less. It only needs to wait for the clock to advance three ticks, not to see it change three times. Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Bryan O'Donoghue <pure.logic@nexus-software.ie> Signed-off-by:
Trent Piepho <tpiepho@impinj.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Israel Rukshin authored
[ Upstream commit d7dcdf9d ] nvmet_rdma_release_rsp() may free the response before using it at error flow. Fixes: 8407879c ("nvmet-rdma: fix possible bogus dereference under heavy load") Signed-off-by:
Israel Rukshin <israelr@mellanox.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit ece27a33 ] Currently, the clock duty is set as tLOW/tHIGH = 1/1. For Fast-mode, tLOW is set to 1.25 us while the I2C spec requires tLOW >= 1.3 us. tLOW/tHIGH = 5/4 would meet both Standard-mode and Fast-mode: Standard-mode: tLOW = 5.56 us, tHIGH = 4.44 us Fast-mode: tLOW = 1.39 us, tHIGH = 1.11 us Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit 8469636a ] Currently, the clock duty is set as tLOW/tHIGH = 1/1. For Fast-mode, tLOW is set to 1.25 us while the I2C spec requires tLOW >= 1.3 us. tLOW/tHIGH = 5/4 would meet both Standard-mode and Fast-mode: Standard-mode: tLOW = 5.56 us, tHIGH = 4.44 us Fast-mode: tLOW = 1.39 us, tHIGH = 1.11 us Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 0544ee4b ] Some AMD based HP laptops have a SMB0001 ACPI device node which does not define any methods. This leads to the following error in dmesg: [ 5.222731] cmi: probe of SMB0001:00 failed with error -5 This commit makes acpi_smbus_cmi_add() return -ENODEV instead in this case silencing the error. In case of a failure of the i2c_add_adapter() call this commit now propagates the error from that call instead of -EIO. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
[ Upstream commit 6c7f25ca ] According to Intel (R) Axxia TM Lionfish Communication Processor Peripheral Subsystem Hardware Reference Manual, the AXXIA I2C module have a programmable Master Wait Timer, which among others, checks the time between commands send in manual mode. When a timeout (25ms) passes, TSS bit is set in Master Interrupt Status register and a Stop command is issued by the hardware. The axxia_i2c_xfer(), does not properly handle this situation, however. For each message a separate axxia_i2c_xfer_msg() is called and this function incorrectly assumes that any interrupt might happen only when waiting for completion. This is mostly correct but there is one exception - a master timeout can trigger if enough time has passed between individual transfers. It will, by definition, happen between transfers when the interrupts are disabled by the code. If that happens, the hardware issues Stop command. The interrupt indicating timeout will not be triggered as soon as we enable them since the Master Interrupt Status is cleared when master mode is entered again (which happens before enabling irqs) meaning this error is lost and the transfer is continued even though the Stop was issued on the bus. The subsequent operations completes without error but a bogus value (0xFF in case of read) is read as the client device is confused because aborted transfer. No error is returned from master_xfer() making caller believe that a valid value was read. To fix the problem, the TSS bit (indicating timeout) in Master Interrupt Status register is checked before each transfer. If it is set, there was a timeout before this transfer and (as described above) the hardware already issued Stop command so the transaction should be aborted thus -ETIMEOUT is returned from the master_xfer() callback. In order to be sure no timeout was issued we can't just read the status just before starting new transaction as there will always be a small window of time (few CPU cycles at best) where this might still happen. For this reason we have to temporally disable the timer before checking for TSS bit. Disabling it will, however, clear the TSS bit so in order to preserve that information, we have to read it in ISR so we have to ensure that the TSS interrupt is not masked between transfers of one transaction. There is no need to call bus recovery or controller reinitialization if that happens so it's skipped. Signed-off-by:
Krzysztof Adamski <krzysztof.adamski@nokia.com> Reviewed-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit 993107fe ] When deleting a VLAN device using an ioctl the netdev is unregistered before the VLAN filter is updated via ndo_vlan_rx_kill_vid(). It can lead to a use-after-free in mlxsw in case the VLAN device is deleted while being enslaved to a bridge. The reason for the above is that when mlxsw receives the CHANGEUPPER event, it wrongly assumes that the VLAN device is no longer its upper and thus destroys the internal representation of the bridge port despite the reference count being non-zero. Fix this by checking if the VLAN device is our upper using its real device. In net-next I'm going to remove this trick and instead make mlxsw completely agnostic to the order of the events. Fixes: c57529e1 ("mlxsw: spectrum: Replace vPorts with Port-VLAN") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
-
Stefan Hajnoczi authored
[ Upstream commit c38f57da ] If a local process has closed a connected socket and hasn't received a RST packet yet, then the socket remains in the table until a timeout expires. When a vhost_vsock instance is released with the timeout still pending, the socket is never freed because vhost_vsock has already set the SOCK_DONE flag. Check if the close timer is pending and let it close the socket. This prevents the race which can leak sockets. Reported-by:
Maximilian Riemensberger <riemensberger@cadami.net> Cc: Graham Whaley <graham.whaley@gmail.com> Signed-off-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Steve French authored
[ Upstream commit 6e785302 ] Missing a dependency. Shouldn't show cifs posix extensions in Kconfig if CONFIG_CIFS_ALLOW_INSECURE_DIALECTS (ie SMB1 protocol) is disabled. Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
Sam Bobroff authored
[ Upstream commit e594a5e3 ] When unloading the ast driver, a warning message is printed by drm_mode_config_cleanup() because a reference is still held to one of the drm_connector structs. Correct this by calling drm_crtc_force_disable_all() in ast_fbdev_destroy(). Signed-off-by:
Sam Bobroff <sbobroff@linux.ibm.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1e613f3c630c7bbc72e04a44b178259b9164d2f6.1543798395.git.sbobroff@linux.ibm.comSigned-off-by:
-
Nicolas Saenz Julienne authored
[ Upstream commit ecb239d9 ] After getting a reference to the platform device's of_node the probe function ends up calling of_find_matching_node() using the node as an argument. The function takes care of decreasing the refcount on it. We are then incorrectly decreasing the refcount on that node again. This patch removes the unwarranted call to of_node_put(). Fixes: 414fd46e ("fsl/fman: Add FMan support") Signed-off-by:
-
Vladimir Murzin authored
[ Upstream commit 3d0358d0 ] Chris has discovered and reported that v7_dma_inv_range() may corrupt memory if address range is not aligned to cache line size. Since the whole cache-v7m.S was lifted form cache-v7.S the same observation applies to v7m_dma_inv_range(). So the fix just mirrors what has been done for v7 with a little specific of M-class. Cc: Chris Cole <chris@sageembedded.com> Signed-off-by:
Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Chris Cole authored
[ Upstream commit a1208f6a ] This patch addresses possible memory corruption when v7_dma_inv_range(start_address, end_address) address parameters are not aligned to whole cache lines. This function issues "invalidate" cache management operations to all cache lines from start_address (inclusive) to end_address (exclusive). When start_address and/or end_address are not aligned, the start and/or end cache lines are first issued "clean & invalidate" operation. The assumption is this is done to ensure that any dirty data addresses outside the address range (but part of the first or last cache lines) are cleaned/flushed so that data is not lost, which could happen if just an invalidate is issued. The problem is that these first/last partial cache lines are issued "clean & invalidate" and then "invalidate". This second "invalidate" is not required and worse can cause "lost" writes to addresses outside the address range but part of the cache line. If another component writes to its part of the cache line between the "clean & invalidate" and "invalidate" operations, the write can get lost. This fix is to remove the extra "invalidate" operation when unaligned addressed are used. A kernel module is available that has a stress test to reproduce the issue and a unit test of the updated v7_dma_inv_range(). It can be downloaded from http://ftp.sageembedded.com/outgoing/linux/cache-test-20181107.tgz. v7_dma_inv_range() is call by dmac_[un]map_area(addr, len, direction) when the direction is DMA_FROM_DEVICE. One can (I believe) successfully argue that DMA from a device to main memory should use buffers aligned to cache line size, because the "clean & invalidate" might overwrite data that the device just wrote using DMA. But if a driver does use unaligned buffers, at least this fix will prevent memory corruption outside the buffer. Signed-off-by:
Chris Cole <chris@sageembedded.com> Signed-off-by:
-
Saeed Mahameed authored
[ Upstream commit 1b603f9e ] MLX4_EN depends on NETDEVICES, ETHERNET and INET Kconfigs. Make sure they are listed in MLX4_EN Kconfig dependencies. This fixes the following build break: drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: ‘struct iphdr’ declared inside parameter list [enabled by default] struct iphdr *iph) ^ drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/ethernet/mellanox/mlx4/en_rx.c: In function ‘get_fixed_ipv4_csum’: drivers/net/ethernet/mellanox/mlx4/en_rx.c:586:20: error: dereferencing pointer to incomplete type _u8 ipproto = iph->protocol; Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Anderson Luiz Alves authored
[ Upstream commit a7451560 ] Disable hardware level MAC learning because it breaks station roaming. When enabled it drops all frames that arrive from a MAC address that is on a different port at learning table. Signed-off-by:
Anderson Luiz Alves <alacn1@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Juha-Matti Tilli authored
[ Upstream commit fd6f32f7 ] These devices support read zero after trim (RZAT), as they advertise to the OS. However, the OS doesn't believe the SSDs unless they are explicitly whitelisted. Acked-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Juha-Matti Tilli <juha-matti.tilli@iki.fi> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit 6c3516fe ] I noticed that the Android v3.0.8 kernel on droid4 is using different keypad values from the mainline kernel and does not have issues with keys occasionally being stuck until pressed again. Turns out there was an earlier patch posted to fix this as "Input: omap-keypad: errata i689: Correct debounce time", but it was never reposted to fix use macros for timing calculations. This updated version is using macros, and also fixes the use of the input clock rate to use 32768KiHz instead of 32000KiHz. And we want to use the known good Android kernel values of 3 and 6 instead of 2 and 6 in the earlier patch. Reported-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Teika Kazura authored
[ Upstream commit 5a6dab15 ] SMBus works fine for the touchpad with id SYN3221, used in the HP 15-ay000 series, This device has been reported in these messages in the "linux-input" mailing list: * https://marc.info/?l=linux-input&m=152016683003369&w=2 * https://www.spinics.net/lists/linux-input/msg52525.htmlReported-by:
Nitesh Debnath <niteshkd1999@gmail.com> Reported-by:
Teika Kazura <teika@gmx.com> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 2e85c574 ] The > comparison should be >= or we write one element beyond the end of the unit->clk_table[] array. (The unit->clk_table[] array is allocated in the mmp_clk_init() function and it has unit->nr_clks elements). Fixes: 4661fda1 ("clk: mmp: add basic support functions for DT support") Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit d9f5b7f5 ] These > comparisons should be >= to prevent reading beyond the end of of the clk_data->hws[] buffer. The clk_data->hws[] array is allocated in cp110_syscon_common_probe() when we do: cp110_clk_data = devm_kzalloc(dev, sizeof(*cp110_clk_data) + sizeof(struct clk_hw *) * CP110_CLK_NUM, GFP_KERNEL); As you can see, it has CP110_CLK_NUM elements which is equivalent to CP110_MAX_CORE_CLOCKS + CP110_MAX_GATABLE_CLOCKS. Fixes: d3da3eae ("clk: mvebu: new driver for Armada CP110 system controller") Signed-off-by:
-
Wen Yang authored
[ Upstream commit 098336de ] The error checks on ret for a negative error return always fails because the return value of iommu_map_sg() is unsigned and can never be negative. Detected with Coccinelle: drivers/gpu/drm/msm/msm_iommu.c:69:9-12: WARNING: Unsigned expression compared with zero: ret < 0 Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> CC: Rob Clark <robdclark@gmail.com> CC: David Airlie <airlied@linux.ie> CC: Julia Lawall <julia.lawall@lip6.fr> CC: linux-arm-msm@vger.kernel.org CC: dri-devel@lists.freedesktop.org CC: freedreno@lists.freedesktop.org CC: linux-kernel@vger.kernel.org Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
Yangtao Li authored
[ Upstream commit a51921c0 ] use of_node_put() to release the refcount. Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Signed-off-by:
-
Yangtao Li authored
[ Upstream commit dac097c4 ] of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. This place is not doing this, so fix it. Signed-off-by:
-
