- 29 Jul, 2023 4 commits
-
-
YueHaibing authored
This is not used since commit 3a755cd8 ("bonding: add new option lacp_active") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20230726143816.15280-1-yuehaibing@huawei.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Hayes Wang says: ==================== r8152: reduce control transfer The two patches are used to reduce the number of control transfer when access the registers in bulk. ==================== Link: https://lore.kernel.org/r/20230726030808.9093-417-nic_swsd@realtek.comSigned-off-by:
-
Hayes Wang authored
PLA_BP_0 ~ PLA_BP_15 (0xfc28 ~ 0xfc46) are continuous registers, so we could combine the control transfers into one control transfer. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Link: https://lore.kernel.org/r/20230726030808.9093-419-nic_swsd@realtek.comSigned-off-by:
-
Hayes Wang authored
Reduce the control transfer if all bytes of first or the last DWORD are written. The original method is to split the control transfer into three parts (the first DWORD, middle continuous data, and the last DWORD). However, they could be combined if whole bytes of the first DWORD or last DWORD are written. That is, the first DWORD or the last DWORD could be combined with the middle continuous data, if the byte_en is 0xff. Signed-off-by:
-
- 28 Jul, 2023 36 commits
-
-
Colin Ian King authored
The pointer data is being incremented but this change to the pointer is not used afterwards. The increment is redundant and can be removed. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Acked-by:
Lino Sanfilippo <LinoSanfilippo@gmx.de> Link: https://lore.kernel.org/r/20230726164522.369206-1-colin.i.king@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Chuck Lever says: ==================== In-kernel support for the TLS Alert protocol IMO the kernel doesn't need user space (ie, tlshd) to handle the TLS Alert protocol. Instead, a set of small helper functions can be used to handle sending and receiving TLS Alerts for in-kernel TLS consumers. ==================== Merged on top of a tag in case it's needed in the NFS tree. Link: https://lore.kernel.org/r/169047923706.5241.1181144206068116926.stgit@oracle-102.nfsv4bat.orgSigned-off-by:
-
Chuck Lever authored
Add observability for the new TLS Alert infrastructure. Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Link: https://lore.kernel.org/r/169047947409.5241.14548832149596892717.stgit@oracle-102.nfsv4bat.orgSigned-off-by:
-
Chuck Lever authored
Use the helpers to parse the level and description fields in incoming alerts. "Warning" alerts are discarded, and "fatal" alerts mean the session is no longer valid. Signed-off-by:
-
Chuck Lever authored
Kernel TLS consumers can replace common TLS Alert parsing code with these helpers. Signed-off-by:
-
Chuck Lever authored
Before closing a TCP connection, the TLS protocol wants peers to send session close Alert notifications. Add those in both the RPC client and server. Signed-off-by:
-
Chuck Lever authored
This helper sends an alert only if a TLS session was established. Signed-off-by:
-
Chuck Lever authored
I'm about to add support for kernel handshake API consumers to send TLS Alerts, so introduce the needed protocol definitions in the new header tls_prot.h. This presages support for Closure alerts. Also, support for alerts is a pre-requite for handling session re-keying, where one peer will signal the need for a re-key by sending a TLS Alert. Reviewed-by:
-
Chuck Lever authored
Kernel TLS consumers will need definitions of various parts of the TLS protocol, but often do not need the function declarations and other infrastructure provided in <net/tls.h>. Break out existing standardized protocol elements into a separate header, and make room for a few more elements in subsequent patches. Signed-off-by:
-
Suman Ghosh authored
drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c:860 otx2_tc_update_mcam_table_del_req() error: uninitialized symbol 'cntr_val'. Fixes: ec87f054 ("octeontx2-af: Install TC filter rules in hardware based on priority") Signed-off-by:
Suman Ghosh <sumang@marvell.com> Link: https://lore.kernel.org/r/20230727163101.2793453-1-sumang@marvell.comSigned-off-by:
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== eth: bnxt: fix a couple of W=1 C=1 warnings Fix a couple of build warnings. ==================== Link: https://lore.kernel.org/r/20230727190726.1859515-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Fix C=1 warning with sparse 0.6.4: drivers/net/ethernet/broadcom/bnxt/bnxt.c: note: in included file: drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.h:30:1: warning: directive in macro's argument list Don't put defines in a struct_group(). Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20230727190726.1859515-3-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Fix a W=1 warning with gcc 13.1: In function ‘fortify_memcpy_chk’, inlined from ‘bnxt_hwrm_queue_cos2bw_cfg’ at drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c:133:3: include/linux/fortify-string.h:592:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] 592 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The field group is already defined and starts at queue_id: struct bnxt_cos2bw_cfg { u8 pad[3]; struct_group_attr(cfg, __packed, u8 queue_id; __le32 min_bw; Reviewed-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5-updates-2023-07-24 1) Generalize devcom implementation to be independent of number of ports or device's GUID. 2) Save memory on command interface statistics. 3) General code cleanups * tag 'mlx5-updates-2023-07-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Give esw_offloads_load/unload_rep() "mlx5_" prefix net/mlx5: Make mlx5_eswitch_load/unload_vport() static net/mlx5: Make mlx5_esw_offloads_rep_load/unload() static net/mlx5: Remove pointless devlink_rate checks net/mlx5: Don't check vport->enabled in port ops net/mlx5e: Make flow classification filters static net/mlx5e: Remove duplicate code for user flow net/mlx5: Allocate command stats with xarray net/mlx5: split mlx5_cmd_init() to probe and reload routines net/mlx5: Remove redundant cmdif revision check net/mlx5: Re-organize mlx5_cmd struct net/mlx5e: E-Switch, Allow devcom initialization on more vports net/mlx5e: E-Switch, Register devcom device with switch id key net/mlx5: Devcom, Infrastructure changes net/mlx5: Use shared code for checking lag is supported ==================== Link: https://lore.kernel.org/r/20230727183914.69229-1-saeed@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Petr Machata says: ==================== mlxsw: Avoid non-tracker helpers when holding and putting netdevices Using the tracking helpers, netdev_hold() and netdev_put(), makes it easier to debug netdevice refcount imbalances when CONFIG_NET_DEV_REFCNT_TRACKER is enabled. For example, the following traceback shows the callpath to the point of an outstanding hold that was never put: unregister_netdevice: waiting for swp3 to become free. Usage count = 6 ref_tracker: eth%d@ffff888123c9a580 has 1/5 users at mlxsw_sp_switchdev_event+0x6bd/0xcc0 [mlxsw_spectrum] notifier_call_chain+0xbf/0x3b0 atomic_notifier_call_chain+0x78/0x200 br_switchdev_fdb_notify+0x25f/0x2c0 [bridge] fdb_notify+0x16a/0x1a0 [bridge] [...] In this patchset, get rid of all non-ref-tracking helpers in mlxsw. - Patch #1 drops two functions that are not used anymore, but contain dev_hold() / dev_put() calls. - Patch #2 avoids taking a reference in one function which is called under RTNL. - The remaining patches convert individual hold/put sites one by one from trackerless to tracker-enabled. Suggested-by:Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/netdev/4c056da27c19d95ffeaba5acf1427ecadfc3f94c.camel@redhat.com/ ==================== Link: https://lore.kernel.org/r/cover.1690471774.git.petrm@nvidia.comSigned-off-by:
-
Petr Machata authored
Using the tracking helpers makes it easier to debug netdevice refcount imbalances when CONFIG_NET_DEV_REFCNT_TRACKER is enabled. Convert dev_hold() / dev_put() to netdev_hold() / netdev_put() in the router code that deals with IPv6 address events. Signed-off-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/f0af6ad4722b4ca6e598fd4fda8311a3041651ec.1690471775.git.petrm@nvidia.comSigned-off-by:
-
Petr Machata authored
Using the tracking helpers makes it easier to debug netdevice refcount imbalances when CONFIG_NET_DEV_REFCNT_TRACKER is enabled. Convert dev_hold() / dev_put() to netdev_hold() / netdev_put() in the router code that deals with RIF allocation. Signed-off-by:
-
Petr Machata authored
Using the tracking helpers makes it easier to debug netdevice refcount imbalances when CONFIG_NET_DEV_REFCNT_TRACKER is enabled. Convert dev_hold() / dev_put() to netdev_hold() / netdev_put() in the router code that deals with hw_stats events. Signed-off-by:
-
Petr Machata authored
Using the tracking helpers makes it easier to debug netdevice refcount imbalances when CONFIG_NET_DEV_REFCNT_TRACKER is enabled. Convert dev_hold() / dev_put() to netdev_hold() / netdev_put() in the router code that deals with FIB events. Signed-off-by:
-
Petr Machata authored
Using the tracking helpers makes it easier to debug netdevice refcount imbalances when CONFIG_NET_DEV_REFCNT_TRACKER is enabled. Convert dev_hold() / dev_put() to netdev_hold() / netdev_put() in the switchdev module. Signed-off-by:
-
Petr Machata authored
mlxsw_sp_nve_fid_disable() is always called under RTNL. It is therefore safe to call __dev_get_by_index() to get the netdevice pointer without bumping the reference count, because we can be sure the netdevice is not going away. That then obviates the need to put the netdevice later in the function. Signed-off-by:
-
Petr Machata authored
As of commit 151b89f6 ("mlxsw: spectrum_router: Reuse work neighbor initialization in work scheduler"), the functions mlxsw_sp_port_lower_dev_hold() and mlxsw_sp_port_dev_put() have no users. Drop them. Signed-off-by:
-
Patrick Rohr authored
accept_ra_min_rtr_lft only considered the lifetime of the default route and discarded entire RAs accordingly. This change renames accept_ra_min_rtr_lft to accept_ra_min_lft, and applies the value to individual RA sections; in particular, router lifetime, PIO preferred lifetime, and RIO lifetime. If any of those lifetimes are lower than the configured value, the specific RA section is ignored. In order for the sysctl to be useful to Android, it should really apply to all lifetimes in the RA, since that is what determines the minimum frequency at which RAs must be processed by the kernel. Android uses hardware offloads to drop RAs for a fraction of the minimum of all lifetimes present in the RA (some networks have very frequent RAs (5s) with high lifetimes (2h)). Despite this, we have encountered networks that set the router lifetime to 30s which results in very frequent CPU wakeups. Instead of disabling IPv6 (and dropping IPv6 ethertype in the WiFi firmware) entirely on such networks, it seems better to ignore the misconfigured routers while still processing RAs from other IPv6 routers on the same network (i.e. to support IoT applications). The previous implementation dropped the entire RA based on router lifetime. This turned out to be hard to expand to the other lifetimes present in the RA in a consistent manner; dropping the entire RA based on RIO/PIO lifetimes would essentially require parsing the whole thing twice. Fixes: 1671bcfd ("net: add sysctl accept_ra_min_rtr_lft") Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by:
Patrick Rohr <prohr@google.com> Reviewed-by:
Maciej Żenczykowski <maze@google.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230726230701.919212-1-prohr@google.comSigned-off-by:
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== net: store netdevs in an xarray One of more annoying developer experience gaps we have in netlink is iterating over netdevs. It's painful. Add an xarray to make it trivial. v1: https://lore.kernel.org/all/20230722014237.4078962-1-kuba@kernel.org/ ==================== Link: https://lore.kernel.org/r/20230726185530.2247698-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Reap the benefits of easier iteration thanks to the xarray. Convert just the genetlink ones, those are easier to test. Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230726185530.2247698-3-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Iterating over the netdev hash table for netlink dumps is hard. Dumps are done in "chunks" so we need to save the position after each chunk, so we know where to restart from. Because netdevs are stored in a hash table we remember which bucket we were in and how many devices we dumped. Since we don't hold any locks across the "chunks" - devices may come and go while we're dumping. If that happens we may miss a device (if device is deleted from the bucket we were in). We indicate to user space that this may have happened by setting NLM_F_DUMP_INTR. User space is supposed to dump again (I think) if it sees that. Somehow I doubt most user space gets this right.. To illustrate let's look at an example: System state: start: # [A, B, C] del: B # [A, C] with the hash table we may dump [A, B], missing C completely even tho it existed both before and after the "del B". Add an xarray and use it to allocate ifindexes. This way we can iterate ifindexes in order, without the worry that we'll skip one. We may still generate a dump of a state which "never existed", for example for a set of values and sequence of ops: System state: start: # [A, B] add: C # [A, C, B] del: B # [A, C] we may generate a dump of [A], if C got an index between A and B. System has never been in such state. But I'm 90% sure that's perfectly fine, important part is that we can't _miss_ devices which exist before and after. User space which wants to mirror kernel's state subscribes to notifications and does periodic dumps so it will know that C exists from the notification about its creation or from the next dump (next dump is _guaranteed_ to include C, if it doesn't get removed). To avoid any perf regressions keep the hash table for now. Most net namespaces have very few devices and microbenchmarking 1M lookups on Skylake I get the following results (not counting loopback to number of devs): #devs | hash | xa | delta 2 | 18.3 | 20.1 | + 9.8% 16 | 18.3 | 20.1 | + 9.5% 64 | 18.3 | 26.3 | +43.8% 128 | 20.4 | 26.3 | +28.6% 256 | 20.0 | 26.4 | +32.1% 1024 | 26.6 | 26.7 | + 0.2% 8192 |541.3 | 33.5 | -93.8% No surprises since the hash table has 256 entries. The microbenchmark scans indexes in order, if the pattern is more random xa starts to win at 512 devices already. But that's a lot of devices, in practice. Reviewed-by: -
Jakub Kicinski authored
Stanislav Fomichev says: ==================== ynl: couple of unrelated fixes - spelling of xdp-features - s/xdp_zc_max_segs/xdp-zc-max-segs/ - expose xdp-zc-max-segs - add /* private: */ - regenerate headers - print xdp_zc_max_segs from sample ==================== Link: https://lore.kernel.org/r/20230727163001.3952878-1-sdf@google.comSigned-off-by:
-
Stanislav Fomichev authored
Technically we don't have to keep extending the sample, but it feels useful to run these tools locally to confirm everything is working. Signed-off-by:
Stanislav Fomichev <sdf@google.com> Reviewed-by:
-
Stanislav Fomichev authored
Also add support to pass topdir to ynl-regen.sh (Jakub) and call it from the makefile to update the UAPI headers. Signed-off-by:
-
Stanislav Fomichev authored
Simon mentioned in another thread that it makes kdoc happy and Jakub confirms that commit e27cb89a ("scripts: kernel-doc: support private / public marking for enums") actually added the needed support. Signed-off-by:
-
Stanislav Fomichev authored
Also rename it to dashes, to match the rest. And fix unrelated spelling error while we're at it. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/nexDavid S. Miller authored
t-queue Tony Nguyen says: ==================== ice: Implement support for SRIOV + LAG Dave Ertman says: Implement support for SRIOV VF's on interfaces that are in an aggregate interface. The first interface added into the aggregate will be flagged as the primary interface, and this primary interface will be responsible for managing the VF's resources. VF's created on the primary are the only VFs that will be supported on the aggregate. Only Active-Backup mode will be supported and only aggregates whose primary interface is in switchdev mode will be supported. The ice-lag DDP must be loaded to support this feature. Additional restrictions on what interfaces can be added to the aggregate and still support SRIOV VFs are: - interfaces have to all be on the same physical NIC - all interfaces have to have the same QoS settings - interfaces have to have the FW LLDP agent disabled - only the primary interface is to be put into switchdev mode - no more than two interfaces in the aggregate --- v2: - Move NULL check for q_ctx in ice_lag_qbuf_recfg() earlier (patch 6) v1: https://lore.kernel.org/netdev/20230726182141.3797928-1-anthony.l.nguyen@intel.com/ ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hangbin Liu authored
Add extack info for IPv6 address add/delete, which would be useful for users to understand the problem without having to read kernel code. Suggested-by:
Beniamino Galvani <bgalvani@redhat.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
David S. Miller authored
Alex Maftei says: ==================== selftests/ptp: Add support for new timestamp IOCTLs PTP_SYS_OFFSET_EXTENDED was added in November 2018 in 36180087 (" ptp: add PTP_SYS_OFFSET_EXTENDED ioctl") and PTP_SYS_OFFSET_PRECISE was added in February 2016 in 719f1aa4 ("ptp: Add PTP_SYS_OFFSET_PRECISE for driver crosstimestamping") The PTP selftest code is lacking support for these two IOCTLS. This short series of patches adds support for them. Changes in v2: - Fixed rebase issues (v1 somehow ended up with patch 1 being from the first manual split of my changes and patch 2 being from rebase 2 out of 3) - Rebased on top of net-next ==================== Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Alex Maftei authored
The -X option was chosen because X looks like a cross, and the underlying callback is 'get cross timestamp'. Signed-off-by:
Alex Maftei <alex.maftei@amd.com> Signed-off-by:
-
Alex Maftei authored
The -x option (where 'x' stands for eXtended) takes an argument which represents the number of samples to request from the PTP device. The help message will display the maximum number of samples allowed. Providing an invalid argument will also display the maximum number of samples allowed. Signed-off-by:
-
