- 28 Feb, 2023 7 commits
-
-
Horatio Zhang authored
The call trace occurs when the amdgpu is removed after the mode1 reset. During mode1 reset, from suspend to resume, there is no need to reinitialize the ta firmware buffer which caused the bo pin_count increase redundantly. [ 489.885525] Call Trace: [ 489.885525] <TASK> [ 489.885526] amdttm_bo_put+0x34/0x50 [amdttm] [ 489.885529] amdgpu_bo_free_kernel+0xe8/0x130 [amdgpu] [ 489.885620] psp_free_shared_bufs+0xb7/0x150 [amdgpu] [ 489.885720] psp_hw_fini+0xce/0x170 [amdgpu] [ 489.885815] amdgpu_device_fini_hw+0x2ff/0x413 [amdgpu] [ 489.885960] ? blocking_notifier_chain_unregister+0x56/0xb0 [ 489.885962] amdgpu_driver_unload_kms+0x51/0x60 [amdgpu] [ 489.886049] amdgpu_pci_remove+0x5a/0x140 [amdgpu] [ 489.886132] ? __pm_runtime_resume+0x60/0x90 [ 489.886134] pci_device_remove+0x3e/0xb0 [ 489.886135] __device_release_driver+0x1ab/0x2a0 [ 489.886137] driver_detach+0xf3/0x140 [ 489.886138] bus_remove_driver+0x6c/0xf0 [ 489.886140] driver_unregister+0x31/0x60 [ 489.886141] pci_unregister_driver+0x40/0x90 [ 489.886142] amdgpu_exit+0x15/0x451 [amdgpu] Signed-off-by:
Horatio Zhang <Hongkun.Zhang@amd.com> Signed-off-by:
longlyao <Longlong.Yao@amd.com> Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Tom Rix authored
building with gcc and W=1 reports drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c:81:29: error: variable ‘ring’ set but not used [-Werror=unused-but-set-variable] 81 | struct amdgpu_ring *ring; | ^~~~ ring is not used so remove it. Signed-off-by:Tom Rix <trix@redhat.com> Signed-off-by:
-
tiancyin authored
[Why] Variable adev->crtc_irq.num_types was initialized as the value of adev->mode_info.num_crtc at early_init stage, later at hw_init stage, the num_crtc changed due to the display pipe harvest on some SKUs, but the num_types was not updated accordingly, that cause below error in gpu recover. *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3 [How] Defer the initialization of num_types to eliminate the error logs. Signed-off-by:
tiancyin <tianci.yin@amd.com> Reviewed-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Mario Limonciello authored
A mistake has been made in the BIOS for some ASICs with NBIO 7.5.1 where some NBIO registers aren't properly setup. Ensure that they're set during initialization. Tested-by:
Richard Gong <richard.gong@amd.com> Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Acked-by:
-
Harry Wentland authored
Format the input and output CSC matrix so they look like 3x4 matrixes. This will make parsing them much easier and allows us to quickly spot potential mistakes. Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Cc: Pekka Paalanen <ppaalanen@gmail.com> Cc: Sebastian Wick <sebastian.wick@redhat.com> Cc: Vitaly.Prosyak@amd.com Cc: Joshua Ashton <joshua@froggi.es> Cc: dri-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Reviewed-by:
Leo Li <sunpeng.li@amd.com> Signed-off-by:
-
Harry Wentland authored
This will let us pass the kms_hdr.bpc_switch IGT test. The reason the bpc restriction was required is historical. At one point in time we were not falling back to a lower bpc when we didn't have enough bandwidth for the maximum bpc reported by a display. This meant that we couldn't enable some high refresh modes unless we limitted the bpc. Starting with this patch the issue is fixed: commit cbd14ae7 ("drm/amd/display: Fix incorrectly pruned modes with deep color") This patch implemented a fallback mechanism if mode validation failed at the max bpc. This means users now automatically get all modes that can be supported by at least 6 bpc. The driver will enable the mode with the highest possible bpc that is supported by the display. v2: - explain why this is no longer needed (Michel) - refer to commit that fixed bpc fallback (Michel) Signed-off-by:
Joshua Ashton <joshua@froggi.es> Reviewed-by:
Michel Dänzer <mdaenzer@redhat.com> Signed-off-by:
-
Candice Li authored
Fixes following warnings: warning: no previous prototype for 'umc_v8_10_convert_error_address' warning: variable 'channel_index' set but not used Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Candice Li <candice.li@amd.com> Reviewed-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
-
- 23 Feb, 2023 30 commits
-
-
Kun Liu authored
implement apu_thermal_cap r/w callback for vangogh Signed-off-by:
Kun Liu <Kun.Liu2@amd.com> Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
Kun Liu authored
added a sysfs interface for thermal throttling, then userspace can get/update thermal limit Signed-off-by:
-
Arthur Grillo authored
Remove a couple of local variables that are only set but never used, also remove an static utility function that is never used in consequence of the variable removal. This decrease the number of -Wunused-but-set-variable warnings. Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Arthur Grillo <arthurgrillo@riseup.net> Signed-off-by:
-
Arthur Grillo authored
Remove local variables that were just set but were never used. This decrease the number of -Wunused-but-set-variable warnings. Acked-by:
-
Mark Hawrylak authored
Apple iMac11,2 (mid 2010) also with Radeon HD-4670 that has the same issue as iMac10,1 (late 2009) where the internal eDP panel stays dark on driver load. This patch treats iMac11,2 the same as iMac10,1, so the eDP panel stays active. Additional steps: Kernel boot parameter radeon.nomodeset=0 required to keep the eDP panel active. This patch is an extension of commit 564d8a2c ("drm/radeon: Fix eDP for single-display iMac10,1 (v2)") Link: https://lore.kernel.org/all/lsq.1507553064.833262317@decadent.org.uk/Signed-off-by:
Mark Hawrylak <mark.hawrylak@gmail.com> Signed-off-by:
-
Thomas Weißschuh authored
Since commit ee6d3dd4 ("driver core: make kobj_type constant.") the driver core allows the usage of const struct kobj_type. Take advantage of this to constify the structure definitions to prevent modification at runtime. Signed-off-by:
Thomas Weißschuh <linux@weissschuh.net> Signed-off-by:
-
Thomas Weißschuh authored
Since commit ee6d3dd4 ("driver core: make kobj_type constant.") the driver core allows the usage of const struct kobj_type. Take advantage of this to constify the structure definitions to prevent modification at runtime. Reviewed-by:
-
Jiapeng Chong authored
No functional modification involved. drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_detection.c:1199: warning: expecting prototype for dc_link_detect_connection_type(). Prototype was for link_detect_connection_type() instead. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4103Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Hans de Goede authored
The parent for the backlight device should be the drm-connector object, not the PCI device. Userspace relies on this to be able to detect which backlight class device to use on hybrid gfx devices where there may be multiple native (raw) backlight devices registered. Specifically gnome-settings-daemon expects the parent device to have an "enabled" sysfs attribute (as drm_connector devices do) and tests that this returns "enabled" when read. This aligns the parent of the backlight device with i915, nouveau, radeon. Note that drivers/gpu/drm/amd/amdgpu/atombios_encoders.c also already uses the drm_connector as parent, only amdgpu_dm.c used the PCI device as parent before this change. Note this is marked as a RFC because I don't have hw to test, so this has only been compile tested! If someone can test this on actual hw which hits the changed code path that would be great. Link: https://gitlab.gnome.org/GNOME/gnome-settings-daemon/-/issues/730Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Guchun Chen authored
SMU IF version mismatch as a warning message exists widely after asic production, however, due to this log level setting, such mismatch warning will be caught by automation test like IGT and reported as a fake error after checking. As such mismatch does not break anything, to reduce confusion, downgrade it from dev_warn to dev_info. Signed-off-by:
-
Candice Li authored
Support ecc info query for umc v8_10. v2: Simplied by convert_error_address. v3: Remove unused variable and invalid checking. Signed-off-by:
Stanley.Yang <Stanley.Yang@amd.com> Signed-off-by:
-
Candice Li authored
Add convert_error_address for umc v8_10. Signed-off-by:
-
Tao Zhou authored
bad_page_threshold controls page retirement behavior and it should be also checked. v2: simplify the condition of bad page handling path. Signed-off-by:
-
Tao Zhou authored
Ignore ras umc bad page threshold by default, GPU initialization won't be stopped in this mode. v2: refine the description of bad_page_threshold. Signed-off-by:
-
Tao Zhou authored
If a UMC bad page is reserved but not freed by an application, the application may trigger uncorrectable error repeatly by accessing the page. v2: add specific function to do the check. v3: remove duplicate pages, calculate new added bad page number. v4: reuse save_bad_pages to calculate new added bad page number. Signed-off-by:
-
Tao Zhou authored
It records how many bad pages are retired in one uncorrectable error. Signed-off-by:
-
Evan Quan authored
It is assumed the pptable used before runpm is same as the one used afterwards. Thus, we can reuse the stored copy and do not need to resetup the pptable again. Signed-off-by:
Feifei Xu <feifei.xu@amd.com> Signed-off-by:
-
Evan Quan authored
The check for baco support relies on the correct baco state. Signed-off-by:
-
Marek Olšák authored
AMDGPU_IDS_FLAGS_CONFORMANT_TRUNC_COORD: important for conformance on gfx11 Other fields are exposed from IP discovery. enabled_rb_pipes_mask_hi is added for future chips, currently 0. Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21403Signed-off-by:
Marek Olšák <marek.olsak@amd.com> Reviewed-by:
-
Qu Huang authored
In the kfd_wait_on_events() function, the kfd_event_waiter structure is allocated by alloc_event_waiters(), but the event field of the waiter structure is not initialized; When copy_from_user() fails in the kfd_wait_on_events() function, it will enter exception handling to release the previously allocated memory of the waiter structure; Due to the event field of the waiters structure being accessed in the free_waiters() function, this results in illegal memory access and system crash, here is the crash log: localhost kernel: RIP: 0010:native_queued_spin_lock_slowpath+0x185/0x1e0 localhost kernel: RSP: 0018:ffffaa53c362bd60 EFLAGS: 00010082 localhost kernel: RAX: ff3d3d6bff4007cb RBX: 0000000000000282 RCX: 00000000002c0000 localhost kernel: RDX: ffff9e855eeacb80 RSI: 000000000000279c RDI: ffffe7088f6a21d0 localhost kernel: RBP: ffffe7088f6a21d0 R08: 00000000002c0000 R09: ffffaa53c362be64 localhost kernel: R10: ffffaa53c362bbd8 R11: 0000000000000001 R12: 0000000000000002 localhost kernel: R13: ffff9e7ead15d600 R14: 0000000000000000 R15: ffff9e7ead15d698 localhost kernel: FS: 0000152a3d111700(0000) GS:ffff9e855ee80000(0000) knlGS:0000000000000000 localhost kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 localhost kernel: CR2: 0000152938000010 CR3: 000000044d7a4000 CR4: 00000000003506e0 localhost kernel: Call Trace: localhost kernel: _raw_spin_lock_irqsave+0x30/0x40 localhost kernel: remove_wait_queue+0x12/0x50 localhost kernel: kfd_wait_on_events+0x1b6/0x490 [hydcu] localhost kernel: ? ftrace_graph_caller+0xa0/0xa0 localhost kernel: kfd_ioctl+0x38c/0x4a0 [hydcu] localhost kernel: ? kfd_ioctl_set_trap_handler+0x70/0x70 [hydcu] localhost kernel: ? kfd_ioctl_create_queue+0x5a0/0x5a0 [hydcu] localhost kernel: ? ftrace_graph_caller+0xa0/0xa0 localhost kernel: __x64_sys_ioctl+0x8e/0xd0 localhost kernel: ? syscall_trace_enter.isra.18+0x143/0x1b0 localhost kernel: do_syscall_64+0x33/0x80 localhost kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9 localhost kernel: RIP: 0033:0x152a4dff68d7 Allocate the structure with kcalloc, and remove redundant 0-initialization and a redundant loop condition check. Signed-off-by:
Qu Huang <qu.huang@linux.dev> Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
-
Jane Jian authored
in early init to set harvest config if the vcn0/1 is disabled rather than hard-code the ring attributes as before did Signed-off-by:
Jane Jian <Jane.Jian@amd.com> Reviewed-by:
-
Mario Limonciello authored
APUs before Raven didn't support s0ix. As we just relieved some of the safety checks for s0ix to improve power consumption on APUs that support it but that are missing BIOS support a new blind spot was introduced that a user could "try" to run s0ix. Plug this hole so that if users try to run s0ix on anything older than Raven it will just skip suspend of the GPU. Fixes: cf488dcd ("drm/amd: Allow s0ix without BIOS support") Suggested-by:
-
Hawking Zhang authored
GFX v11 changes RB_BACKEND_DISABLE related registers from per SA to global ones. The approach to query active rb bitmap needs to be changed accordingly. Query per SE setting returns wrong active RB bitmap especially in the case when some of SA are disabled. With the new approach, driver will generate the active rb bitmap based on active SA bitmap and global active RB bitmap. Signed-off-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
Likun Gao <Likun.Gao@amd.com> Signed-off-by:
-
Shane Xiao authored
Since the VRAM manager changed from drm mm to drm buddy. It's not necessary to allocate 2MB aligned VRAM for more than 2MB unaligned size, and then do trim. This method improves the allocation efficiency and reduces memory fragmentation. v2: Correct the remainder operation Signed-off-by:
Shane Xiao <shane.xiao@amd.com> Reviewed-by:
Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Signed-off-by:
-
Shane Xiao authored
Since VRAM manager is changed from drm mm to drm buddy, the TOP_DOWN flag should not be set by default in the large bar system. Removing this flag helps improve drm buddy allocator efficiency and reduce the risk of splitting higher order block into lower order. Signed-off-by:
-
Harry Wentland authored
Keeps this selection with the rest of the DRM HELPER selection. Signed-off-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Hamza Mahfooz authored
Since, hot plugging eDP displays isn't supported, it is sufficient for us to warn about the lack of a connected display once. So, use ASSERT() in dce110_edp_wait_for_hpd_ready() instead of DC_LOG_WARNING(). Reviewed-by:
-
Kenneth Feng authored
re-enable ac/dc on smu_v13_0_0/10 Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
Yang Wang <kevinyang.wang@amd.com> Signed-off-by:
-
Jesse Zhang authored
this patch to add tmz support for GC 10.3.6 Signed-off-by:
Jesse Zhang <Jesse.Zhang@amd.com> Reviewed-by:
Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by:
-
Ruili Ji authored
For the MQD memory, KMD would always allocate 4K memory, and mes scheduler would write to the end of MQD for unmap flag. Signed-off-by:
Ruili Ji <ruiliji2@amd.com> Signed-off-by:
-
- 22 Feb, 2023 2 commits
-
-
Dave Airlie authored
clang builds showed this: drivers/gpu/drm/msm/msm_fbdev.c:144:6: error: variable 'helper' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized] if (!fbdev) ^~~~~~ Fixes: 3fb1f62f ("drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini()") Signed-off-by:Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2023-02-21' of git://anongit.freedesktop.org/drm/drm-misc into drm-next Short summary of fixes pull: Fixes GEM SHMEM locking and generic fbdev hotplugging. Constifies dma_buf kobj type. Signed-off-by:
-
- 21 Feb, 2023 1 commit
-
-
Thomas Zimmermann authored
Move drm_fb_helper_unprepare() from drm_fb_helper_fini() into the calling fbdev implementation. Avoids a possible stale mutex with generic fbdev code. As indicated by its name, drm_fb_helper_prepare() prepares struct drm_fb_helper before setting up the fbdev support with a call to drm_fb_helper_init(). In legacy fbdev emulation, this happens next to each other. If successful, drm_fb_helper_fini() later tear down the fbdev device and also unprepare via drm_fb_helper_unprepare(). Generic fbdev emulation prepares struct drm_fb_helper immediately after allocating the instance. It only calls drm_fb_helper_init() as part of processing a hotplug event. If the hotplug-handling fails, it runs drm_fb_helper_fini(). This unprepares the fb-helper instance and the next hotplug event runs on stale data. Solve this by moving drm_fb_helper_unprepare() from drm_fb_helper_fini() into the fbdev implementations. Call it right before freeing the fb-helper instance. Fixes: 643231b2 ("drm/fbdev-generic: Minimize hotplug error handling") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230216140620.17699-1-tzimmermann@suse.de
-
