- 01 Oct, 2019 40 commits
-
-
Dave Jones authored
BugLink: https://bugs.launchpad.net/bugs/1845395 [ Upstream commit 6ae81ced ] Trinity and other fuzzers can hit this WARN on far too easily, resulting in a tainted kernel that hinders automated fuzzing. Replace it with a rate-limited printk. Signed-off-by:
Dave Jones <davej@codemonkey.org.uk> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Zhenzhong Duan authored
BugLink: https://bugs.launchpad.net/bugs/1845395 commit 8c5477e8 upstream. Kernel build warns: 'sanitize_boot_params' defined but not used [-Wunused-function] at below files: arch/x86/boot/compressed/cmdline.c arch/x86/boot/compressed/error.c arch/x86/boot/compressed/early_serial_console.c arch/x86/boot/compressed/acpi.c That's becausethey each include misc.h which includes a definition of sanitize_boot_params() via bootparam_utils.h. Remove the inclusion from misc.h and have the c file including bootparam_utils.h directly. Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1563283092-1189-1-git-send-email-zhenzhong.duan@oracle.com [nc: Fixed conflict around lack of 67b66625] Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1845395 [ Upstream commit 9c940bbe ] Clang warns after commit 8985167e ("clk: s2mps11: Fix matching when built as module and DT node contains compatible"): drivers/clk/clk-s2mps11.c:242:34: warning: variable 's2mps11_dt_match' is not needed and will not be emitted [-Wunneeded-internal-declaration] static const struct of_device_id s2mps11_dt_match[] = { ^ 1 warning generated. This warning happens when a variable is used in some construct that doesn't require a reference to that variable to be emitted in the symbol table; in this case, it's MODULE_DEVICE_TABLE, which only needs to hold the data of the variable, not the variable itself. $ nm -S drivers/clk/clk-s2mps11.o | rg s2mps11_dt_match 00000078 000003d4 R __mod_of__s2mps11_dt_match_device_table Normally, with device ID table variables, it means that the variable just needs to be tied to the device declaration at the bottom of the file, like s2mps11_clk_id: $ nm -S drivers/clk/clk-s2mps11.o | rg s2mps11_clk_id 00000000 00000078 R __mod_platform__s2mps11_clk_id_device_table 00000000 00000078 r s2mps11_clk_id However, because the comment above this deliberately doesn't want this variable added to .of_match_table, we need to mark s2mps11_dt_match as __used to silence this warning. This makes it clear to Clang that the variable is used for something, even if a reference to it isn't being emitted. Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Nicolas Boichat authored
BugLink: https://bugs.launchpad.net/bugs/1845395 [ Upstream commit 31013836 ] The basepath may contain special characters, which would confuse the regex matcher. ${var#prefix} does the right thing. Link: http://lkml.kernel.org/r/20190518055946.181563-1-drinkcat@chromium.org Fixes: 67a28de4 ("scripts/decode_stacktrace: only strip base path when a prefix of the path") Signed-off-by:
Nicolas Boichat <drinkcat@chromium.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Tiwei Bie authored
BugLink: https://bugs.launchpad.net/bugs/1845395 commit 264b563b upstream. Since vhost_exceeds_weight() was introduced, callers need to specify the packet weight and byte weight in vhost_dev_init(). Note that, the packet weight isn't counted in this patch to keep the original behavior unchanged. Fixes: e82b9b07 ("vhost: introduce vhost_exceeds_weight()") Cc: stable@vger.kernel.org Signed-off-by:
Tiwei Bie <tiwei.bie@intel.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Cong Wang authored
BugLink: https://bugs.launchpad.net/bugs/1845395 commit dbb2483b upstream. In commit 6a53b759 ("xfrm: check id proto in validate_tmpl()") I introduced a check for xfrm protocol, but according to Herbert IPSEC_PROTO_ANY should only be used as a wildcard for lookup, so it should be removed from validate_tmpl(). And, IPSEC_PROTO_ANY is expected to only match 3 IPSec-specific protocols, this is why xfrm_state_flush() could still miss IPPROTO_ROUTING, which leads that those entries are left in net->xfrm.state_all before exit net. Fix this by replacing IPSEC_PROTO_ANY with zero. This patch also extracts the check from validate_tmpl() to xfrm_id_proto_valid() and uses it in parse_ipsecrequest(). With this, no other protocols should be added into xfrm. Fixes: 6a53b759 ("xfrm: check id proto in validate_tmpl()") Reported-by: syzbot+0bf0519d6e0de15914fe@syzkaller.appspotmail.com Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
Zubin Mithra <zsm@chromium.org> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1845395 commit 89781d08 upstream. The recent change to shuffle the codec initialization procedure for Realtek via commit 607ca3bd ("ALSA: hda/realtek - EAPD turn on later") caused the silent output on some machines. This change was supposed to be safe, but it isn't actually; some devices have quirk setups to override the EAPD via COEF or BTL in the additional verb table, which is applied at the beginning of snd_hda_gen_init(). And this EAPD setup is again overridden in alc_auto_init_amp(). For recovering from the regression, tell snd_hda_gen_init() not to apply the verbs there by a new flag, then apply the verbs in alc_init(). BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204727 Fixes: 607ca3bd ("ALSA: hda/realtek - EAPD turn on later") Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1845395 commit 333f3143 upstream. Since the chained quirks via chained_before flag is applied before the depth check, it may lead to the endless recursive calls, when the chain were set up incorrectly. Fix it by moving the depth check at the beginning of the loop. Fixes: 1f578250 ("ALSA: hda - Add chained_before flag to the fixup entry") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1845374Signed-off-by:
-
Chen-Yu Tsai authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit 3b25528e ] The devicetree binding lists the phy phy as optional. As such, the driver should not bail out if it can't find a regulator. Instead it should just skip the remaining regulator related code and continue on normally. Skip the remainder of phy_power_on() if a regulator supply isn't available. This also gets rid of the bogus return code. Fixes: 2e12f536 ("net: stmmac: dwmac-rk: Use standard devicetree property for phy regulator") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Feng Sun authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit 2c1644cf ] After commit baeababb ("tun: return NET_XMIT_DROP for dropped packets"), when tun_net_xmit drop packets, it will free skb and return NET_XMIT_DROP, netpoll_send_skb_on_dev will run into following use after free cases: 1. retry netpoll_start_xmit with freed skb; 2. queue freed skb in npinfo->txq. queue_process will also run into use after free case. hit netpoll_send_skb_on_dev first case with following kernel log: [ 117.864773] kernel BUG at mm/slub.c:306! [ 117.864773] invalid opcode: 0000 [#1] SMP PTI [ 117.864774] CPU: 3 PID: 2627 Comm: loop_printmsg Kdump: loaded Tainted: P OE 5.3.0-050300rc5-generic #201908182231 [ 117.864775] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 117.864775] RIP: 0010:kmem_cache_free+0x28d/0x2b0 [ 117.864781] Call Trace: [ 117.864781] ? tun_net_xmit+0x21c/0x460 [ 117.864781] kfree_skbmem+0x4e/0x60 [ 117.864782] kfree_skb+0x3a/0xa0 [ 117.864782] tun_net_xmit+0x21c/0x460 [ 117.864782] netpoll_start_xmit+0x11d/0x1b0 [ 117.864788] netpoll_send_skb_on_dev+0x1b8/0x200 [ 117.864789] __br_forward+0x1b9/0x1e0 [bridge] [ 117.864789] ? skb_clone+0x53/0xd0 [ 117.864790] ? __skb_clone+0x2e/0x120 [ 117.864790] deliver_clone+0x37/0x50 [bridge] [ 117.864790] maybe_deliver+0x89/0xc0 [bridge] [ 117.864791] br_flood+0x6c/0x130 [bridge] [ 117.864791] br_dev_xmit+0x315/0x3c0 [bridge] [ 117.864792] netpoll_start_xmit+0x11d/0x1b0 [ 117.864792] netpoll_send_skb_on_dev+0x1b8/0x200 [ 117.864792] netpoll_send_udp+0x2c6/0x3e8 [ 117.864793] write_msg+0xd9/0xf0 [netconsole] [ 117.864793] console_unlock+0x386/0x4e0 [ 117.864793] vprintk_emit+0x17e/0x280 [ 117.864794] vprintk_default+0x29/0x50 [ 117.864794] vprintk_func+0x4c/0xbc [ 117.864794] printk+0x58/0x6f [ 117.864795] loop_fun+0x24/0x41 [printmsg_loop] [ 117.864795] kthread+0x104/0x140 [ 117.864795] ? 0xffffffffc05b1000 [ 117.864796] ? kthread_park+0x80/0x80 [ 117.864796] ret_from_fork+0x35/0x40 Signed-off-by:
Feng Sun <loyou85@gmail.com> Signed-off-by:
Xiaojun Zhao <xiaojunzhao141@gmail.com> Signed-off-by:
-
Linus Torvalds authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit 950b07c1 ] This reverts commit 558682b5. Chris Wilson reports that it breaks his CPU hotplug test scripts. In particular, it breaks offlining and then re-onlining the boot CPU, which we treat specially (and the BIOS does too). The symptoms are that we can offline the CPU, but it then does not come back online again: smpboot: CPU 0 is now offline smpboot: Booting Node 0 Processor 0 APIC 0x0 smpboot: do_boot_cpu failed(-1) to wakeup CPU#0 Thomas says he knows why it's broken (my personal suspicion: our magic handling of the "cpu0_logical_apicid" thing), but for 5.3 the right fix is to just revert it, since we've never touched the LDR bits before, and it's not worth the risk to do anything else at this stage. [ Hotpluging of the boot CPU is special anyway, and should be off by default. See the "BOOTPARAM_HOTPLUG_CPU0" config option and the cpu0_hotplug kernel parameter. In general you should not do it, and it has various known limitations (hibernate and suspend require the boot CPU, for example). But it should work, even if the boot CPU is special and needs careful treatment - Linus ] Link: https://lore.kernel.org/lkml/156785100521.13300.14461504732265570003@skylake-alporthouse-com/Reported-by:
Chris Wilson <chris@chris-wilson.co.uk> Acked-by:
-
Martin Sperl authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit 73b114ee ] On long running tests with a mcp2517fd can controller it showed that on rare occations the data read shows corruptions for longer spi transfers. Example of a 22 byte transfer: expected (as captured on logic analyzer): FF FF 78 00 00 00 08 06 00 00 91 20 77 56 84 85 86 87 88 89 8a 8b read by the driver: FF FF 78 00 00 00 08 06 00 00 91 20 77 56 84 88 89 8a 00 00 8b 9b To fix this use BCM2835_AUX_SPI_STAT_RX_LVL to determine when we may read data from the fifo reliably without any corruption. Surprisingly the only values ever empirically read in BCM2835_AUX_SPI_STAT_RX_LVL are 0x00, 0x10, 0x20 and 0x30. So whenever the mask is not 0 we can read from the fifo in a safe manner. The patch has now been tested intensively and we are no longer able to reproduce the "RX" issue any longer. Fixes: 1ea29b39 ("spi: bcm2835aux: add bcm2835 auxiliary spi device...") Reported-by:
Hubert Denkmair <h.denkmair@intence.de> Signed-off-by:
Martin Sperl <kernel@martin.sperl.org> Acked-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Martin Sperl authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit c7de8500 ] This read of the fifo is a potential candidate for a race condition as the spi transfer is not necessarily finished and so can lead to an early read of the fifo that still misses data. So it has been removed. Fixes: 1ea29b39 ("spi: bcm2835aux: add bcm2835 auxiliary spi device...") Suggested-by:
-
Martin Sperl authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit 7188a6f0 ] Sharing more code between polling and interrupt-driven mode. Signed-off-by:
-
Rob Herring authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit bc519d95 ] The BCM2835 AUX SPI has a shared interrupt line (with AUX UART). Downstream fixes this with an AUX irqchip to demux the IRQ sources and a DT change which breaks compatibility with older kernels. The AUX irqchip was already rejected for upstream[1] and the DT change would break working systems if the DTB is updated to a newer one. The latter issue was brought to my attention by Alex Graf. The root cause however is a bug in the shared handler. Shared handlers must check that interrupts are actually enabled before servicing the interrupt. Add a check that the TXEMPTY or IDLE interrupts are enabled. [1] https://patchwork.kernel.org/patch/9781221/ Cc: Alexander Graf <agraf@suse.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Eric Anholt <eric@anholt.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-spi@vger.kernel.org Cc: linux-rpi-kernel@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
Luis Henriques authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit 5c498950 ] Signed-off-by:
Luis Henriques <lhenriques@suse.com> Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Andrew Jones authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit 2113c5f6 ] If after an MMIO exit to userspace a VCPU is immediately run with an immediate_exit request, such as when a signal is delivered or an MMIO emulation completion is needed, then the VCPU completes the MMIO emulation and immediately returns to userspace. As the exit_reason does not get changed from KVM_EXIT_MMIO in these cases we have to be careful not to complete the MMIO emulation again, when the VCPU is eventually run again, because the emulation does an instruction skip (and doing too many skips would be a waste of guest code :-) We need to use additional VCPU state to track if the emulation is complete. As luck would have it, we already have 'mmio_needed', which even appears to be used in this way by other architectures already. Fixes: 0d640732 ("arm64: KVM: Skip MMIO insn after emulation") Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
-
Luis Henriques authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit 86968ef2 ] Calling ceph_buffer_put() in __ceph_setxattr() may end up freeing the i_xattrs.prealloc_blob buffer while holding the i_ceph_lock. This can be fixed by postponing the call until later, when the lock is released. The following backtrace was triggered by fstests generic/117. BUG: sleeping function called from invalid context at mm/vmalloc.c:2283 in_atomic(): 1, irqs_disabled(): 0, pid: 650, name: fsstress 3 locks held by fsstress/650: #0: 00000000870a0fe8 (sb_writers#8){.+.+}, at: mnt_want_write+0x20/0x50 #1: 00000000ba0c4c74 (&type->i_mutex_dir_key#6){++++}, at: vfs_setxattr+0x55/0xa0 #2: 000000008dfbb3f2 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: __ceph_setxattr+0x297/0x810 CPU: 1 PID: 650 Comm: fsstress Not tainted 5.2.0+ #437 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x67/0x90 ___might_sleep.cold+0x9f/0xb1 vfree+0x4b/0x60 ceph_buffer_release+0x1b/0x60 __ceph_setxattr+0x2b4/0x810 __vfs_setxattr+0x66/0x80 __vfs_setxattr_noperm+0x59/0xf0 vfs_setxattr+0x81/0xa0 setxattr+0x115/0x230 ? filename_lookup+0xc9/0x140 ? rcu_read_lock_sched_held+0x74/0x80 ? rcu_sync_lockdep_assert+0x2e/0x60 ? __sb_start_write+0x142/0x1a0 ? mnt_want_write+0x20/0x50 path_setxattr+0xba/0xd0 __x64_sys_lsetxattr+0x24/0x30 do_syscall_64+0x50/0x1c0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7ff23514359a Signed-off-by:
-
Wenwen Wang authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit 5c1baaa8 ] In mlx4_ib_alloc_pv_bufs(), 'tun_qp->tx_ring' is allocated through kcalloc(). However, it is not always deallocated in the following execution if an error occurs, leading to memory leaks. To fix this issue, free 'tun_qp->tx_ring' whenever an error occurs. Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Acked-by:
Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/1566159781-4642-1-git-send-email-wenwen@cs.uga.eduSigned-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Vitaly Kuznetsov authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit 89eb4d8d ] When building hv_kvp_daemon GCC-8.3 complains: hv_kvp_daemon.c: In function ‘kvp_get_ip_info.constprop’: hv_kvp_daemon.c:812:30: warning: ‘ip_buffer’ may be used uninitialized in this function [-Wmaybe-uninitialized] struct hv_kvp_ipaddr_value *ip_buffer; this seems to be a false positive: we only use ip_buffer when op == KVP_OP_GET_IP_INFO and it is only unset when op == KVP_OP_ENUMERATE. Silence the warning by initializing ip_buffer to NULL. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Tho Vu authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit cfef46d6 ] When a Tx timestamp is requested, a pointer to the skb is stored in the ravb_tstamp_skb struct. This was done without an skb_get. There exists the possibility that the skb could be freed by ravb_tx_free (when ravb_tx_free is called from ravb_start_xmit) before the timestamp was processed, leading to a use-after-free bug. Use skb_get when filling a ravb_tstamp_skb struct, and add appropriate frees/consumes when a ravb_tstamp_skb struct is freed. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Signed-off-by:
Tho Vu <tho.vu.wh@rvc.renesas.com> Signed-off-by:
Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Wenwen Wang authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit 44ef3a03 ] In i2400m_barker_db_init(), 'options_orig' is allocated through kstrdup() to hold the original command line options. Then, the options are parsed. However, if an error occurs during the parsing process, 'options_orig' is not deallocated, leading to a memory leak bug. To fix this issue, free 'options_orig' before returning the error. Signed-off-by:
-
Wenwen Wang authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit f1472cb0 ] In kalmia_init_and_get_ethernet_addr(), 'usb_buf' is allocated through kmalloc(). In the following execution, if the 'status' returned by kalmia_send_init_packet() is not 0, 'usb_buf' is not deallocated, leading to memory leaks. To fix this issue, add the 'out' label to free 'usb_buf'. Signed-off-by:
-
Wenwen Wang authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit 1eca92ee ] In cx82310_bind(), 'dev->partial_data' is allocated through kmalloc(). Then, the execution waits for the firmware to become ready. If the firmware is not ready in time, the execution is terminated. However, the allocated 'dev->partial_data' is not deallocated on this path, leading to a memory leak bug. To fix this issue, free 'dev->partial_data' before returning the error. Signed-off-by:
-
Wenwen Wang authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit 20fb7c7a ] In myri10ge_probe(), myri10ge_alloc_slices() is invoked to allocate slices related structures. Later on, myri10ge_request_irq() is used to get an irq. However, if this process fails, the allocated slices related structures are not deallocated, leading to memory leaks. To fix this issue, revise the target label of the goto statement to 'abort_with_slices'. Signed-off-by:
-
Wenwen Wang authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit c554336e ] In blocked_fl_write(), 't' is not deallocated if bitmap_parse_user() fails, leading to a memory leak bug. To fix this issue, free t before returning the error. Signed-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit 68e03b85 ] when do randbuilding, I got this error: In file included from drivers/hwmon/pmbus/ucd9000.c:19:0: ./include/linux/gpio/driver.h:576:1: error: redefinition of gpiochip_add_pin_range gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name, ^~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/hwmon/pmbus/ucd9000.c:18:0: ./include/linux/gpio.h:245:1: note: previous definition of gpiochip_add_pin_range was here gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name, ^~~~~~~~~~~~~~~~~~~~~~ Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: 964cb341 ("gpio: move pincontrol calls to <linux/gpio/driver.h>") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190731123814.46624-1-yuehaibing@huawei.comSigned-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Thomas Falcon authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit 66cf4710 ] The ibm,mac-address-filters property defines the maximum number of addresses the hypervisor's multicast filter list can support. It is encoded as a big-endian integer in the OF device tree, but the virtual ethernet driver does not convert it for use by little-endian systems. As a result, the driver is not behaving as it should on affected systems when a large number of multicast addresses are assigned to the device. Reported-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Matthias Kaehlcke authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit 8059ba0b ] On WCN3990 downloading the NVM sometimes fails with a "TLV response size mismatch" error: [ 174.949955] Bluetooth: btqca.c:qca_download_firmware() hci0: QCA Downloading qca/crnv21.bin [ 174.958718] Bluetooth: btqca.c:qca_tlv_send_segment() hci0: QCA TLV response size mismatch It seems the controller needs a short time after downloading the firmware before it is ready for the NVM. A delay as short as 1 ms seems sufficient, make it 10 ms just in case. No event is received during the delay, hence we don't just silently drop an extra event. Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit 125b7e09 ] clang warns: drivers/net/ethernet/toshiba/tc35815.c:1507:30: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand] if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN) ^ ~~~~~~~~~~~~ drivers/net/ethernet/toshiba/tc35815.c:1507:30: note: use '&' for a bitwise operation if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN) ^~ & drivers/net/ethernet/toshiba/tc35815.c:1507:30: note: remove constant to silence this warning if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN) ~^~~~~~~~~~~~~~~ 1 warning generated. Explicitly check that NET_IP_ALIGN is not zero, which matches how this is checked in other parts of the tree. Because NET_IP_ALIGN is a build time constant, this check will be constant folded away during optimization. Fixes: 82a9928d ("tc35815: Enable StripCRC feature") Link: https://github.com/ClangBuiltLinux/linux/issues/608Signed-off-by:
-
Fuqian Huang authored
BugLink: https://bugs.launchpad.net/bugs/1845374 [ Upstream commit 8c25d088 ] As spin_unlock_irq will enable interrupts. Function tsi108_stat_carry is called from interrupt handler tsi108_irq. Interrupts are enabled in interrupt handler. Use spin_lock_irqsave/spin_unlock_irqrestore instead of spin_(un)lock_irq in IRQ context to avoid this. Signed-off-by:
Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1845036Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1845036 I incorrectly merged commit 31a2fbb3 ("x86/ptrace: Fix possible spectre-v1 in ptrace_get_debugreg()") when backporting it, as was graciously pointed out at https://grsecurity.net/teardown_of_a_failed_linux_lts_spectre_fix.php Resolve the upstream difference with the stable kernel merge to properly protect things. Reported-by:
Brad Spengler <spender@grsecurity.net> Cc: Dianzhang Chen <dianzhangchen0@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <bp@alien8.de> Cc: <hpa@zytor.com> Signed-off-by:
-
Johannes Berg authored
BugLink: https://bugs.launchpad.net/bugs/1845036 commit 5fd2f91a upstream. If TDLS station addition is rejected, the sta memory is leaked. Avoid this by moving the check before the allocation. Cc: stable@vger.kernel.org Fixes: 7ed52853 ("mac80211: don't initiate TDLS connection if station is not associated to AP") Link: https://lore.kernel.org/r/20190801073033.7892-1-johannes@sipsolutions.netSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Hodaszi, Robert authored
BugLink: https://bugs.launchpad.net/bugs/1845036 commit 0d31d4db upstream. This reverts commit 96cce12f ("cfg80211: fix processing world regdomain when non modular"). Re-triggering a reg_process_hint with the last request on all events, can make the regulatory domain fail in case of multiple WiFi modules. On slower boards (espacially with mdev), enumeration of the WiFi modules can end up in an intersected regulatory domain, and user cannot set it with 'iw reg set' anymore. This is happening, because: - 1st module enumerates, queues up a regulatory request - request gets processed by __reg_process_hint_driver(): - checks if previous was set by CORE -> yes - checks if regulator domain changed -> yes, from '00' to e.g. 'US' -> sends request to the 'crda' - 2nd module enumerates, queues up a regulator request (which triggers the reg_todo() work) - reg_todo() -> reg_process_pending_hints() sees, that the last request is not processed yet, so it tries to process it again. __reg_process_hint driver() will run again, and: - checks if the last request's initiator was the core -> no, it was the driver (1st WiFi module) - checks, if the previous initiator was the driver -> yes - checks if the regulator domain changed -> yes, it was '00' (set by core, and crda call did not return yet), and should be changed to 'US' ------> __reg_process_hint_driver calls an intersect Besides, the reg_process_hint call with the last request is meaningless since the crda call has a timeout work. If that timeout expires, the first module's request will lost. Cc: stable@vger.kernel.org Fixes: 96cce12f ("cfg80211: fix processing world regdomain when non modular") Signed-off-by:
Robert Hodaszi <robert.hodaszi@digi.com> Link: https://lore.kernel.org/r/20190614131600.GA13897@a1-hrSigned-off-by:
-
Nadav Amit authored
BugLink: https://bugs.launchpad.net/bugs/1845036 commit ba03a9bb upstream. Francois reported that VMware balloon gets stuck after a balloon reset, when the VMCI doorbell is removed. A similar error can occur when the balloon driver is removed with the following splat: [ 1088.622000] INFO: task modprobe:3565 blocked for more than 120 seconds. [ 1088.622035] Tainted: G W 5.2.0 #4 [ 1088.622087] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1088.622205] modprobe D 0 3565 1450 0x00000000 [ 1088.622210] Call Trace: [ 1088.622246] __schedule+0x2a8/0x690 [ 1088.622248] schedule+0x2d/0x90 [ 1088.622250] schedule_timeout+0x1d3/0x2f0 [ 1088.622252] wait_for_completion+0xba/0x140 [ 1088.622320] ? wake_up_q+0x80/0x80 [ 1088.622370] vmci_resource_remove+0xb9/0xc0 [vmw_vmci] [ 1088.622373] vmci_doorbell_destroy+0x9e/0xd0 [vmw_vmci] [ 1088.622379] vmballoon_vmci_cleanup+0x6e/0xf0 [vmw_balloon] [ 1088.622381] vmballoon_exit+0x18/0xcc8 [vmw_balloon] [ 1088.622394] __x64_sys_delete_module+0x146/0x280 [ 1088.622408] do_syscall_64+0x5a/0x130 [ 1088.622410] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1088.622415] RIP: 0033:0x7f54f62791b7 [ 1088.622421] Code: Bad RIP value. [ 1088.622421] RSP: 002b:00007fff2a949008 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 1088.622426] RAX: ffffffffffffffda RBX: 000055dff8b55d00 RCX: 00007f54f62791b7 [ 1088.622426] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055dff8b55d68 [ 1088.622427] RBP: 000055dff8b55d00 R08: 00007fff2a947fb1 R09: 0000000000000000 [ 1088.622427] R10: 00007f54f62f5cc0 R11: 0000000000000206 R12: 000055dff8b55d68 [ 1088.622428] R13: 0000000000000001 R14: 000055dff8b55d68 R15: 00007fff2a94a3f0 The cause for the bug is that when the "delayed" doorbell is invoked, it takes a reference on the doorbell entry and schedules work that is supposed to run the appropriate code and drop the doorbell entry reference. The code ignores the fact that if the work is already queued, it will not be scheduled to run one more time. As a result one of the references would not be dropped. When the code waits for the reference to get to zero, during balloon reset or module removal, it gets stuck. Fix it. Drop the reference if schedule_work() indicates that the work is already queued. Note that this bug got more apparent (or apparent at all) due to commit ce664331 ("vmw_balloon: VMCI_DOORBELL_SET does not check status"). Fixes: 83e2ec76 ("VMCI: doorbell implementation.") Reported-by:
Francois Rigault <rigault.francois@gmail.com> Cc: Jorgen Hansen <jhansen@vmware.com> Cc: Adit Ranadive <aditr@vmware.com> Cc: Alexios Zavras <alexios.zavras@intel.com> Cc: Vishnu DASA <vdasa@vmware.com> Cc: stable@vger.kernel.org Signed-off-by:
Nadav Amit <namit@vmware.com> Reviewed-by:
Vishnu Dasa <vdasa@vmware.com> Link: https://lore.kernel.org/r/20190820202638.49003-1-namit@vmware.comSigned-off-by:
-
Ding Xiang authored
BugLink: https://bugs.launchpad.net/bugs/1845036 commit 961b6ffe upstream. In the error path of stm_source_register_device(), the kfree is unnecessary, as the put_device() before it ends up calling stm_source_device_release() to free stm_source_device, leading to a double free at the outer kfree() call. Remove it. Signed-off-by:
Ding Xiang <dingxiang@cmss.chinamobile.com> Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: 7bd1d409 ("stm class: Introduce an abstraction for System Trace Module devices") Link: https://lore.kernel.org/linux-arm-kernel/1563354988-23826-1-git-send-email-dingxiang@cmss.chinamobile.com/ Cc: stable@vger.kernel.org # v4.4+ Link: https://lore.kernel.org/r/20190821074955.3925-2-alexander.shishkin@linux.intel.comSigned-off-by:
-
Ulf Hansson authored
BugLink: https://bugs.launchpad.net/bugs/1845036 commit 72741084 upstream. The OCR register defines the supported range of VDD voltages for SD cards. However, it has turned out that some SD cards reports an invalid voltage range, for example having bit7 set. When a host supports MMC_CAP2_FULL_PWR_CYCLE and some of the voltages from the invalid VDD range, this triggers the core to run a power cycle of the card to try to initialize it at the lowest common supported voltage. Obviously this fails, since the card can't support it. Let's fix this problem, by clearing invalid bits from the read OCR register for SD cards, before proceeding with the VDD voltage negotiation. Cc: stable@vger.kernel.org Reported-by:
Philip Langdale <philipl@overt.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by:
Manuel Presnitz <mail@mpy.de> Signed-off-by:
-
Eugen Hristev authored
BugLink: https://bugs.launchpad.net/bugs/1845036 commit 7871aa60 upstream. HS200 is not implemented in the driver, but the controller claims it through caps. Remove it via a quirk, to make sure the mmc core do not try to enable HS200, as it causes the eMMC initialization to fail. Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Fixes: bb5f8ea4 ("mmc: sdhci-of-at91: introduce driver for the Atmel SDMMC") Cc: stable@vger.kernel.org # v4.4+ Signed-off-by:
-
